5.1 system and cord extensions

I was wondering if anyone knew off hand if I had to manually splice my wires to lengthen the cords to reach across my living room, or if longer cords were available without having to buy new speakers. If I had to manually splice my own wires, any tips? Thanks
Message Edited by bent4life on 10-26-2007 03:13 PM
Message Edited by bent4life on 10-26-2007 03:22 PM

Two things to check:
1) Open the "Sounds and Audio Devices" control panel. On the Volume tab, click the "Advanced" button. Is the speaker setup "5.1.."?
2) Open the quicktime control panel. On the "Audio" tab, check that the Channels is 5.1.
If you changed either of the above settings, restart the application you're testing with and try again.
If that doesn't work, try checking the "safe mode (waveout only)" box in the Quicktime control panel (audio tab). Again, restart the application and try again.
Hope that helps,
Rob

Similar Messages

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

TS5150 have shaw gateway PVR system and can no longer get audio, picture okay, have tried optical cord as well

Have shaw gateway PVR system and can no longer get audio, video okay, even tried using optical cord

Ok. For TV audio: Have you checked TV settings, tried a different HDMI cable and port ?
For receiver, checked its settings and ATV audio settings? Made sure optical was secure on ATV and receiver, tried different cable?
You indicated it was something that started when the PVR was introduced, so I would also contact them.

Facelets and jsf-extensions problem.

I'm fairly certain I've run into a problem between facelets and jsf-extensions. I'm working with JSF 1.2 RI, Woodstock, Facelets 1.1.13, on Tomcat 6.
When trying to get Woodstock autoValidation to work I get a javascript error the "I has no properties". The error occurs in the com_sun_faces_ajax.js file in the jsf-extensions-dynamic-faces-0.1.jar (I've used both the RC4 and a build today ,10/18/07 from source with the same results). Here is the code snippet where it happens (with my comment).
var I = G.getElementsByTagName("components")[0];
var C = I.getElementsByTagName("render");
for(var F = 0; F < C.length; F++) {
In the second line there it looks like the variable I is null, but based on the post response below I don't know why.
The response from the post looks like this:
<partial-response><components><render id="PayableForm:vendorGci"><markup><![CDATA[{"valid":true,"id":"PayableForm:vendorGci"}]]></markup></render></components>
However the server side code (validation method) never gets executed. I'm willing to do some digging and debug work, but I'd need to be pointed in the right direction.
The following is more potentially useful code snippets.
Here is the textField code:
<w:form id="PayableForm">
<w:textField style="display:none;" />
<w:message for="vendorGci" />
<w:label id="vendorGciLabel" for="vendorGci" text="Vendor: " />
<w:textField id="vendorGci" autoValidate="true"
text="${vendorBean.searchGci}" maxlength="8" required="true"
validatorExpression="#{ vendorBean.validateVendor}" />
Here is the javascript in the page (the init function is called from the body: onLoad="setTimeout('init();', 0);" , this does happen):
<w:script type="text/javascript">
function VendorListener(){
function VendorNotify(props){
alert("VendorNotify called!"); <--------------- I never see this alert message
if ( props.id != "PayableForm:vendorGci") { return; }
var field = document.getElementById("PayableForm:vendorGciLabel");
field.setProps({
valid: props.valid
VendorListener.prototype.notify = VendorNotify;
function initAccountRows(){
var table = document.getElementById("PayableForm:vendorAccountTable");
table.initAllRows();
function init(){
initAccountRows();
var listener = new VendorListener();
dojo.subscribe(
webui.suntheme.widget.textField.event.validation.endTopic ,
listener, listener.notify);
Here is the validator method. It currently doesn't do anything, just trying to get something to work. I never see the output, and I never hit the breakpoint in the method.
public void validateVendor(FacesContext context, UIComponent comp, Object value){
System.out.println("**********************************");
System.out.println("validateVendor called");
System.out.println(value);
System.out.println("**********************************");
}

Actually I don't need a global variable. I need to refer in my included template the actual backing bean used in the current page. As all my backing bean extends a abstract class I could bind my component to a property of the current backing bean, no matters which one. Just like a polymorphic call but without the parameter. Let's imagine I could get this object of the facesContext object I would be able to do:
<rich:datascroller renderIfSinglePage="false" align="right" for="listagem" maxPages="12" fastStep="10"
pageIndexVar="pageIndex" pagesVar="pages" stepControls="show" fastControls="hide" boundaryControls="show"
inactiveStyleClass="paginacaoInativa" selectedStyleClass="paginacaoSelecionada"
styleClass="paginacao" tableStyleClass="paginacaoTabela"
binding="#{facesContext.currentBackingbean.formDataScroller}" id="paginacao">
Instead of pass the backing bean to the ui:param of this template... Dou you get the point?

Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted. After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print. Ran Windows Fix and the HP fix programs. The only thing that solves it is to reboot the computer. A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes). Firefox still connects OK when this is happening. So I suspect the problem isn't with the printer, but with my Windows set up. It is a fresh XP SP3 install (hard drive crashed, but it happened before also). I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
Hoping that someone else has run into this problem. Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps.

If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
http://www.mozilla.com/en-US/firefox/all-older.html
Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
I had to disable extensions: Flashblock and WOT
Firefox SafeMode? - A troubleshooting mode.
1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Hope this helps you out.
Feedback is appreciated especially if this helps you out.

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndiws 7 system and use a Intel core processor. I have restarted several times and still ge this

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndows 7 system and use a Intel core processor. I have restarted several times and still ge this error. I have also tried to reinstall firefox and get the same error
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDS; InfoPath.2; .NET4.0C; AskTbUT2V5/5.8.0.12304)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Reformatted disk but restore didn't work properly, had to reinstall system and now having major kext errors

Basically I had to reformat my hard drive, and in order to do that I copied all the files from it to a disk image which I then used to restore through disk utility.
Now this worked as far as individual files go, but the OS for some reason didn't copy properly. After restoring from the image, the machine started up with an infinite pinwheel and apple logo, not going anywhere, so I eventually just reinstalled snow leopard from the original installer. This is fine as far as the system itself goes, but I'm having some very annoying issues - for one, some things which I had registered have reverted to trial versions (probably just a question of moving some preference files from the backup which got overwritten, shouldn't be too hard) but far more seriously, a bunch of kext extensions aren't loading, including one which is needed to run my external wifi antenna (the internal one is banjaxed, won't connect to any network unless you're sitting beside the router at all times).
Here's the console log. Why are these kexts not working, when they worked perfectly before the reformat? Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this. But more urgently, how do I get these extensions working again? Using airport isn't sustainable, I can't sit on the stairs every time I want to use the internet
12/06/2013 11:16:57
com.apple.kextd[12]
Failed to load /System/Library/Extensions/RT2870USBWirelessDriver.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:16:57
com.apple.kextd[12]
Load com.Ralink.driver.RT2870USBWirelessDriver failed; removing personalities.
12/06/2013 11:16:58
kernel
Previous Shutdown Cause: 5
12/06/2013 11:16:58
kernel
Warning - kext com.apple.driver.AppleIntelIntegratedFramebuffer has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
12/06/2013 11:16:58
kernel
Warning - kext com.apple.driver.AppleIntelGMA950 has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
12/06/2013 11:16:58
kernel
Atheros: mac 12.2 phy 8.1 radio 12.0
12/06/2013 11:16:58
bootlog[40]
BOOT_TIME: 1371032202 0
12/06/2013 11:17:03
blued[41]
Apple Bluetooth daemon started
12/06/2013 11:17:03
com.apple.SecurityServer[27]
Session 0x5fbff962 created
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/BoomDevice.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.globaldelight.driver.BoomDevice failed; removing personalities.
12/06/2013 11:17:04
mDNSResponder[30]
mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
12/06/2013 11:17:04
com.apple.usbmuxd[23]
usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
12/06/2013 11:17:04
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]
Login Window Application Started
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/RT2870USBWirelessDriver.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.Ralink.driver.RT2870USBWirelessDriver failed; removing personalities.
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/BoomDevice.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.globaldelight.driver.BoomDevice failed; removing personalities.
As you can guess, Ralink USB Wireless Driver is the one I'm having trouble with, although the other error you see, BoomDevice, is one of the apps which had been registered but has reverted to trial. The errors in console made me think it was a permissions issue, but repairing permissions, despite taking half an hour and modifying tons of files, did not resolve this issue.
How do I fix this, and also out of interest, why did it happen in the first place? I imagined formatting and restoring would be far, far less complicated than this O_o
EDIT: Should point out that obviously going from 10.6.8, the reinstall reverted to 10.6, and I haven't been able to upgrade since I can't get this internet kext working. Shouldn't be a problem though since the wireless driver was for 10.6.x...

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

EEW customizing for system-wide object extension

Hello.
We are trying to enhance BUPA object through easy enhancement tool. We
customized EEW via EEWC transaction and we created a RFC connection to
let central system (CRM) and target system (R/3 system) to communicate
each other.
After these steps we launch EEWB transaction from CRM system by doing
the following steps:
1.We created a new project
2.We created a new extension for BUPA object, and type of
extension: Add new fields
3.At this moment Wizard is started.
4.We enter the name, enter the technical properties .
The problem appears when we try to enter SYSTEM RELEVANCE, we can´t
state in which other systems the fields of the CI Include are relevant
because only column Relevant for BW appears, and we want
enter Relevant for R/3. However the transport requests are created
system-wide what shows that the two systems are communicated.
Nevertheless, no objects are extended in the target system although the
extension is executed properly in CRM.
Could you please tell us what is due to?
Thanks in advance

Carmen,
Have you defined the R/3 system landscape in transaction EEWC. In order to define a field as R/3 relevant the corresponding R/3 systems need to be defined in the EEWC setup. However EEWB does not work with R/3 backends lower than 4.7 from past experience. If the R/3 system does not have the packages or function groups that start with OXT. You must have at least 4.7 or higher in order to use the auto-generation features for R/3.
You must also make sure you perform the post-processing steps described in the EEWB documentation(in the standard CRM help) in order to make sure the processing fully works.
Good luck,
Stephen

Difference between client system and logical system

Hi all
Can any one explain about the client system and logical system??
When this message type will comes in to picture at the time idoc processing??
Thanks and Regards
Arun Joseph

hi Arun,
I am giving the complete info on idoc.pls chk once.then ur issue will be solved.ok
and to know the diffrence between client and logical system very keenly go thru this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abouttheclientsystemandlogicalsystem&adv=false&sortby=cm_rnd_rankvalue
IDOC Administration
Step 1: Tcode: WE 46
Setting the Global Parameter for IDOC Interface
Step 2: Maintaing a Logical System
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Logical Systems, Define Logical systems
Go to Spro transaction
Step 3: Allocating Logical systems to the Client
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Logical Systems, Assign Client to Logical systems
Go to Spro transaction
Step 4: Setting up an RFC destination
Tcode: SM 59
Path: From the ALE Customizing in IMG, choose Communication, Define RFC
Destination
You can also do the Advanced Settings in the RFC Destination
Step 5: The PORT definition
TCode: WE 21
Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
Systems in Network, Asynchronous Processing, Assign Ports, Define Port
Step 6: Generating Partner Profiles
TCode: BD 82
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, PArtner Profiles and Time of Processing, Generate Partner Profiles
Step 7: Distributing the Model
TCode: BD 64
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, Maintain Distribution Model and Distribute Views
Technques for Distributing the Master Data:
Technique 1: The Push Approach
Executing the Process:
TCode: BD 10
Path: from the ALE Main Menu, choose Material Data Distribution, Cross
Application, Material, Send
Technique 2: The Change Pointer Technique
Enable Change Pointers Globally
TCode: BD 61
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution, Replication of Modified Data, Activate
Change Pointers
Enable Change Pointers Globally
TCode: BD 50
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution, Replication of Modified Data, Activate
Change Pointers for Message Type
Specify the Fields for which Change Pointers are to be written
TCode: BD 52
Path: From the ALE main Menu, Choose ALE Development, IDOCs, Change , Define
Change-Relevant Fields
How the Classification system works:
Creating a Class Type
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Status for the Class Types:
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Classification Status:
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
Maintaing Classes:
TCode: CL 01 (it is zero)
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Maintain Classes
Allocating classes to the Logical Syatems
TCode: BD 68
TCode: O1 CL(it is CAPITAL O)
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Distribution using Object Classes, Assign classes
to Logical systems
Filering at the IDOC level:
Identify the Filter Object:
TCode: BD 59
Path: From the ALE main Menu, Choose ALE Development, IDOCs,Data Filtering, Assign Filter Objects
Type to IDOC Field
Modify the Distribution model
How Segment Filtering Works:
Configuration:
Configring the segment-filtering technique is a one-step process.Just specify the segments to be filtered
TCode: BD 56
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Scope of the Data for Distribution, Filter IDOC Segments
The Reduced IDOC Type:
The reduced IDOC type allows to get down to the field level and specify the fields a recieving system does not need.
The System still needs the fields, but this has no effect on the recieving system because each field has a null value,
represented by a forward slash(/) in the field.
TCode: BD 53
Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
Process, MAster Data distribution,Scope of the Data for Distribution, Message Reduction,
Create Reduced Message Type
IDOC:
Complete Documentaion on any IDOC using TCode: WE 60
IDOC Display Tool: TCode: WE 02 or WE 05
IDOC DEfinition components:
Segment Components:
1. Segment Type (E1, Z1)
2. Segment Definition(E2, Z2)
3. Segment Documentation(E3, Z3)
E- SAP Defined
z- Custom Defined
IDOC runtime componets:
control Record:
Data Record:
Staus Record:
First Create the Segments using TCode: WE 31
and then create the IDOC using TCode: We3 30
first release the segments and then IDOC.
Creating a new Basic IDOC Type:
STEP 1: Analyze the Data:
STEP 2: Create Data Elements:
STEP 3: Create Segments:
STEP 4: Create Basic IDOC Type:
1. Execute TCode: WE 30
2. Select the Create new option and enter a description for your basic IDOC type
3. click the IDOC name, and click the create icon.
Enter the segment type and its attributes.
4. Keep on adding the segments as in step 3.
5. Save the basic IDOC type
Step 5: Release the Segment Type and Basic IDOC Type
STEP 6: Transport the Segments and Basic IDOC Type
Extending a Basic IDOC type:
STEP 1: Analyze the Data:
STEP 2: Create Custom Segments:
STEP 3: Create the IDOC Type:
STEP 4: Release the custom Segment and IDOC Extension
Develop the function module for fteching the Data and then inserting the data into IDOC using
EDIDD(for control Record) and EDIDC table(for DATA Record)
Configuring the Systen for IDOCs
Configure an Outboubd Process that uses Message Control
Step 1: Create a new Message Type
TCode: We 81
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 2: link the IDOC type to the Message Type
TCode: We 82
Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
Step 3: Create a new Process Code
TCode: We 41
Path: From the Area menu of EDI, choose Control,Outbound Process COde
Step 4: Create or Change a Partner Profile
TCode: We 41
Path: From the Area menu of EDI, choose IDOC,Partner Profile
Configure an Outboubd Process for Stand-Alone Programs
1. Create a new message type
2. Link the IDOC type to the Message Type
3. Add the message to the ALE Distribution Model(use BD 64)
4. Create or change the Partner Profile
go through the following site to have screen shots.
http://www.****************/Tutorials/ALE/ALEMainPage.htm
thanks
karthik
reward me points if usefull

Overlapping of an Select-Option Field and the Extension Button.

Hi,
I have declared a Select-Option as follows:
Tables: agr_define .
select-options: s_role for agr_define-agr_name obligatory
no intervals .
It is not throwing any error.
If I execute this program, On the selection screen, I find one field where I can enter the Role and an extension button to enter multiple roles.
But the F4 help overlaps on the Extension Button and the customer wants this overlapping to be removed, I mean this F4 help button and the Extension button should not overlap with each other.
Can you help me acheive this.
Thanks and Regards,
Ishaq.

Boss,
You cannot avoid that overlapping.
yes, one can change the system screen 1000.
but, in future it will definitely create problems like if you add any extra field and if are using that code in some other server it will never get reflected.So, will you go to Screen 1000 of that server and change the screen attributes again??
okay even i would like to find the answer for that.
If you find the solution, do send me the real answer in this same thread.

References: Appearance different in Development System and in Run Time System

I noticed a difference the references appearance in Development System and in Run Time System. It seems to have no effect in the executable version but, per curiosity, someone have an explanation?
Development System
Run Time System
Jean-Marc
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Solved!
Go to Solution.

tst wrote:
When LabVIEW builds an executable, it removes the parts which are not needed from the VIs (like BDs, or FPs of VIs which will not be opened). I'm assuming this is an extension of that where the icon is not copied over. Another option is that the RTE is simply missing the code necessary to display this specific this.
In any case, I would say it's a bug, albeit a minor one.
I don't think this is a bug, the references refere to a given CTL file, which is not present in the RTE, I think LabVIEW disconnects the reference form the typedef and only saves the properties needed.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Legacy Timesheet System and Oracle Projects

Dear All,
Is it possible to interface legacy timesheet system with Oracle Projects. The intention is to enter timesheets/hours thru the legacy system and calculation of revenue and invoice in Oracle Projects.
1)Is this achievable, without issues?
2)How complex is this to achieve?
3)Any URL or documentation will be really helpful in this regard.
Thanks.
Regards,
Anand

Hi
There is no need for API.
You should write your own script to populate the interface table.
When you run the process PRC: Transaction Import, the system is validating the transactions. Only the valid transactions are imported as Expenditure Items. Exceptions remain in the interface, and you can review and correct those.
Review the deatils on Oracle Projects APIs, Client Extensions and Open Interface Reference.
Note, you should have set up a Transaction Source in Oracle Projects for your legacy Time system.
Dina

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup. 
You can check that via the right-click context menu of that file and open the Properties. 
If you are not sure about the file type then you can open the file in Firefox via "File > Open File" 
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links. 
A JSON backup starts with: {"title":"","id":1,"dateAdded": 
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

I can't download anything with dng and zip extensions

I'm new with the Lion System and I'm very upset because when i'm trying to download something from the web with dng and zip extensions nothing comes down, everything gets blank, please I need some help with this problem.
Thanks.

Is the problem with Safari, or some other web browser? Do you mean DMG, or DNG?

5.1 system and cord extensions

Similar Messages

Maybe you are looking for