501 not implemented errors

Hi,
In our portal some users are getting 501 not implemented errors in some front pages.After refreshing everything works fine.Any body have any idea?How this can be solved?
Regards
Imran

HI
Error Message:
Error 501/505: Not implemented or not supported.
Translation:
This error may occur when using Internet Explorer in Windows XP to view a Web page. This error can be caused by either having the HTTP 1.1 setting enabled or by an interference with Internet Explorer by a third-party product. Since there are some Web sites that still use HTTP 1.0, connection issues can arise if you have HTTP 1.1 enabled.
Solution:
The easiest fix for this error can be found if HTTP 1.1 is enabled. To fix the problem, simply disable HTTP 1.1. You can do this by clicking Tools in Internet Explorer and going to the Internet Options menu. Go to the Advanced tab and uncheck the box next to Use HTTP 1.1. Click OK and test to see if the issue is resolved. If you have resolved the issue, do not proceed with the following steps. If the error still remains, go back to the Tools menu in Internet Explorer and select Internet Options. Next, click the Advanced tab and check the box next to u201CShow friendly HTTP error messagesu201D and click OK. The next time this error occurs, a more detailed error message should appear to tell you which program is interfering with the proper display of the Web page. The more friendly error message will say something to the effect of, u201CHTTP version not supported by program name,u201D where program name is the name of the program that is preventing the Web page from displaying correctly. You can either remove this program to attempt to solve the problem or you can contact the manufacturer of the program to see if there is a fix available.
Regards,
vijay.

Similar Messages

Intermittent 501 Not Implemented Errors

Just wanted to ask if anyone else had come across intermittent Error 501 -- Not Implemented Errors while using PeopleTools 8.51? We are using PeopleTools 8.51.02 and have come across this a few times in both campus solutions and financials (same tools versions).
Any ideas or suggestions on what might be causing it? Signs tend to suggest and AJAX related problem.

PeopleSoft has also published this resolution on My Oracle Support (MOS) - E-PIA: PeopleTools 8.50 and 8.51 - Intermittent "Error 501--Not implemented" Messages when Navigating to a Page Using IE7 or IE8 Browser. Doc ID : 1337266.1

"HTTP error: 501 Not Implemented" error while uploading emp photo

Hi,
While uploading employee photo
getting error "HTTP error: 501 Not Implemented"
this error i am getting while linking employee photo to SAP.
pls suggest me how to solve.
thanx in advance

Hi,
don't worry about the "HTTP error:501 Not Implemented The adminContRep command is an internal SAP R/3 command and not accepted by this content repository" error message, it only means that if you chosen the CSadmin button (or transaction) that this only developed from SAP content server and cannot be used for other 3rd party ones, like OpenText.
BR,
Janos

Error while sending a message 501 not implemented

Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advance

Hi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     ... 20 more

Cure for "501 Method Not Implemented" error at site in Firefox but not Chrome or IE?

I am receiving a "501 Method Not Implemented" error message at a site in Firefox but not in Chrome or IE. How can this be cured?

Do you get that error if you access the site or if you click a link to got to another page?
You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]]
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Native Webservices - ERROR 501: Not Implemented ... why?

I'm running Oracle xe 11G.
Recently I've tried to setup Native Web Services. I set up the database and user accordingly, defined a testfunction and accessed the database with following URL:
http://localhost:8080/orawsv/GUT/TESTWS?wsdl
This worked.
I did another test at another database, where I set up a defined user for webservices and granted this user execution privileges on the same testfunction. Accessing this function via SQL works OK. But when I issue a similar URL (http://localhost:8080/wwwsss/WSBRAN/TESTWS?wsdl) I get:
"ERROR 501: Not Implemented."
I did not find an error in my setup yet - so maybe somebody can hint me on the deeper meaning of this error! Where can I look to fix this?
Thanks a lot,
Stephan

Oh, I should have called the servlet "orawsv" as it is described. Corrected this and now it works!

Rv042 Error 501 not implemented

Hi
My quickvpn setup has been working great for a few years but it stop working recently with the following error message in
wget_request_error.txt:
HTTP request sent, awaiting response... 501 Not Implemented
20:10:10 ERROR 501: Not Implemented.
quickvpn hangs on the dreaded verifying network stage.
Checked VPN router logs and also quickVPN client logs and confirmed the tunnel has been created successfully. However the ping was unsuccessful.
I look through the forum and confirmed that my quickvpn user account and password only contains alphanumeric characters.
Really appreciate if someone can please help me resolve this issue.
Thanks.

Hi,
don't worry about the "HTTP error:501 Not Implemented The adminContRep command is an internal SAP R/3 command and not accepted by this content repository" error message, it only means that if you chosen the CSadmin button (or transaction) that this only developed from SAP content server and cannot be used for other 3rd party ones, like OpenText.
BR,
Janos

HTTP 501 Not Implemented or HTTP 505 Version Not Supported

when trying to post on the ABAP Forum, i am getting the following:
The website is unable to display the webpage
HTTP 501/HTTP 505
   What you can try:
     Go back to the previous page.
     More information
This error (HTTP 501 Not Implemented or HTTP 505 Version Not Supported) means that the website you are visiting doesn't currently have the ability to display the webpage, or support the HTTP version used to request the page.
For more information about HTTP errors, see Help.
i have tried from firefox, chrome and IE and unable to post.. i may look stupid and this may work here! lol!
but i have been trying for several hours to post a question on the ABAP forum... :o(

You have been "bagged" by SAP Security's cross site scripting filter. No way around it (for obvious reasons). Somewhere in your post there is something that is interpreted as an xxs attack. Unfortunately, happens a lot when trying to post code or code terms. Some people have managed to work around this using some of the same tricks used by people wanting to post forbidden words and phrases like
myemal at sap dot com
j a v a s c r i p t
and the like. Try some experimenting and you might succeed.

Flash sockets over SIP-protocol: HTTP/1.1 501 Not Implemented

Hi there.
I'm developing a chat app based on IRC server and flash client (flash sockets). Everything is OK but for some ISP flash client doesn't connect to IRC server: There are some logs from chat while connecting to IRC server:
    Send: PASS password
    Send: NICK nickname
    Send: USER username
    Receive: HTTP/1.1 501 Not Implemented
    Receive: Content-type: text/html
    Receive: Content-Length: 219
There is only thing I'm aware - this issue occurs for SIP mobile network provider only. For other non-mobile providers issue doesn't occur and chat works good.
I would really appreciate for any thoughts on this matter.

Hi there.
I'm developing a chat app based on IRC server and flash client (flash sockets). Everything is OK but for some ISP flash client doesn't connect to IRC server: There are some logs from chat while connecting to IRC server:
    Send: PASS password
    Send: NICK nickname
    Send: USER username
    Receive: HTTP/1.1 501 Not Implemented
    Receive: Content-type: text/html
    Receive: Content-Length: 219
There is only thing I'm aware - this issue occurs for SIP mobile network provider only. For other non-mobile providers issue doesn't occur and chat works good.
I would really appreciate for any thoughts on this matter.

FUNCTION NOT IMPLEMENTED error when calling C# method from SAP, why?

Hi,
I've build a server stub in order to get SAP calling my own methods that exist in the C# world, for that I developed several methods in a class that extends SAPServer and then implemented them...
I added the special custom properties needed (Abap Name, length, etc) to the function and to its parameters, I've made the ABAP code required to call it...
I've checked, every parameters that I place in ABAP (importing, exporting and tables) are also defined in C# (its 53 parameters) with the same name (in C# they are in capital letters and in a diferent order but I tried this before and it didn't matter)...
The name of the function is the same...
How can I get the 'FUNCTION NOT IMPLEMENT' error in SAP?
What's going wrong when I get this error?
Can anyone tell me?
Is there any place in this site that has a error description and possible reasons?
When I get a parameter wrong I get a different error (I tried to make smaller functions and they work fine).
Thanks for the help,
Nuno Felino
Message was edited by: Nuno Felino

Hi,
I'll explain what I'm doing:
- we have a set of services made in a C and VB that are available using an API in C#, these services must be available to SAP. So I have a program that will see what parameters the API service requires and makes a proxy so that SAP can call these services.
To do this I must map SAP types with C#, build the function signature and then implement it. So I cannot use the wizard to do this
Now, back to the question, what kind of customer attributes I got wrong to get that exception? The most logic is the AbapName of the function but they are equal (the one called in SAP and the one in the customer attributes of the function)...
Thanks for the answer, can you give me any more hint?

Startworkflow : method not implemented error

Hi,
I am using the following code to run a stored procedure. But every time the stored procedure is called, I get a message that the Startworkflow method is not implemented. But still the procedure is called and everything works fine. Can you please provide
a solution to solve the error
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.MasterDataServices.WorkflowTypeExtender;
using System.Data.SqlClient;
using System.IO;
using System.Xml;
namespace MDSWorkflowExtender
    public class MDSWorkflowExtender : IWorkflowTypeExtender
        public void StartWorkflow(string workflowType, System.Xml.XmlElement dataElement)
            // Open a connection on the workflow database.
            SqlConnection workflowConn = new SqlConnection(@"Data Source=.; Database=DWH; Integrated Security=True");
            // Create a command to call the stored procedure that adds a new user to the workflow database.
            SqlCommand executeCommand = new SqlCommand("dbo.xxxxx", workflowConn);
            // Execute the command.
            workflowConn.Open();
            executeCommand.ExecuteNonQuery();
            workflowConn.Close();
            throw new NotImplementedException();


workflowConn.Close();
// throw new NotImplementedException();
Remove the "throw new NotImplementedException();" statement in your code as I have shown by commenting
it out above. That statement probably is a left-over from the template.

JDBC 2.0 method not implemented error using bea jDriver for MS-SQLServer 2000

I'm trying to reconfigure WebLogic Portal 7.0 (Platform 7.0 SP2) to run on MS SQLServer
2000. According to the supported platform docs, the MS JDBC driver is not supported
by Portal, hence I'm using the BEA jDriver for SQLServer.
I'm now getting the following error when starting up Weblogic Portal which requires
a re-sync with the EBCC before the applications will work.
<28-Aug-03 09:28:30 BST> <Error> <Data Synchronization> <000000> <Application:
portalApp; Corrupted data encountered in the persistent store; PLEASE RE-SYNCHRONIZE
YOUR APPLICATION DATA WITH MODE "refresh-from-client" BEFORE CONTINUING! Failure
to do so may result in incomplete or otherwise corrupted server state.
Exception[com.bea.p13n.management.data.repository.PersistenceException: Failed
to refresh JDBC Persistence Manager.] - with embedded exception: [java.sql.SQLException:
java.sql.SQLException: This JDBC 2.0 method is not implemented] at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:506)
Has anyone else come across this problem and know how to resolve it. I have tried
using the MS JDBC Driver on the off chance that it would work, but this also produced
SQL Exceptions with the persistance store and would not work at all even after
syncing with the EBCC

Jim,
Thanks, I'm awaiting for my account to be enabled with customer contract support.
When this is done I will raise a case and send files as requested.
In the mean time it's worth noting that these settings have been made. Connection
to the DB is fine, the createDB, loadads, loaddocs and sync etc all worked fine.
The problem only exists when restarting the server and the portal persistance
store is trying to be refereshed. Once EBCC is re-synced all the DB access works
fine.
Steve
Jim Litton <reply@newsgroup> wrote:
Please open a support case and send in your set-environment.bat,
db_settings.properties, and config.xml from your domain directory after
trying the following.
Given that your operating system is Windows for performing all database
operations like create_db, loaddocs, sync. (because you should not
bother trying to run them on with UNIX).
Restore your set-environment.bat to it's original state. It does not
need to be touched.
Uncomment the MSSQL section in db_settings.properties.
database=MSSQL
db_version=2000
jdbcdriver=weblogic.jdbc.mssqlserver4.Driver
server=@MSSQL_SERVER@
port=@MSSQL_PORT@
dblogin=@MSSQL_USER@
dbpassword=@MSSQL_PASSWORD@
connection=jdbc:weblogic:mssqlserver4:@MSSQL_SERVER@:@MSSQL_PORT@
The dataSyncPool entry in config.xml should appear as:
<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:@MSSQL_SERVER@:@MSSQL_PORT@"
Properties="user=@MSSQL_USER@;password=@MSSQL_PASSWORD@"
Password="@MSSQL_PASSWORD@"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="99999"
ShrinkingEnabled="false"
Targets="sampleportalServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>
-- Jim

MFE - Server Error 501 Not Implemented - Help Pls

Hi,
I have a Nokia E71 with MFE (latest version) installed and set up with the correct connection and credentials etc
Once i have run through the set up process i get an error which in the logs is viewed as follows:
PeakTime active
Setting OFFLINE Status to False
Missing Protocol Version Header. Reverting to EAS 2.0
HTTP Server Error 501: NotImplemented
Any help or advice would be greatly appreciated

For anyone else who encounters this post, if you're synchronizing your device to an Exchange 2007 server, please try placing a new email in your exchange Inbox to see if that corrects the problem. This error is commonly encountered after a device synchronizes data using a synchronization application other than MfE.
If placing a new item in your Exchange Inbox doesn't work, please power off, then on your device, select MfE > Options > Full resync to synchronize your data.
Message Edited by iwilcox on 26-Jan-2010 09:45 AM

Transport not implemented - error in transport

Hi experts,
I'm facing a problem with the transport of a workflow : it 's creating following error :
Object R3TRPDWS20000075 is in repair status. Therefore, it cannot be imported.
System response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair and repeat the import.
How can I solve this ? It is possible that this error has been generated because we did some changes directly on the workflwow in the QA-environment ?
thanks in advance !

I accidentally did.. created a new version and modified this new one.
A beginner's mistake, but hey,shoot me...
MOD : sorry if my post seemed a bit hard, it didn 't mean to. But i forgot the smiley after the last sentence, and didn 't reread my post..
Sorry..
Message was edited by:
Björn Demol

SIP/2.0 501 Not Implemented

Our 3845 SBC with:
C3845-IPVOICE_IVS-M 12.4(11)XW
close abnormaly the calls from Asterisk
platform with the message in the title.
Anybody hear something about ?
Best Regards
luciano

Hi,
"Call Leg/Transaction Does Not Exist" happens a lot with cisco, even between cisco routers. It should not cause any problem.
Note XW is still quite buggy, now XW5 is out and has many bug fixes.
Hope this helps, please rate post if it does!

501 not implemented errors

Similar Messages

Maybe you are looking for