545 mb file stuck in inbound queue

Hi
we are sending article master data from IS Retail to ftp server as flat file.
data size is around 545 mb...it got stuck in inbound queue(smq2) ..
error is : " Internally required memory is not available".
XI server config : RAM - 16 gb.
How to process such big file.
what are the hardware configuration needed ?
Regards
Abhijit

Hi Michal
Thanks for your response
This activity is done in PRD server.
An idoc with 545 mb data is triggred from SAP.
But it got stuck in inbound queue.
I came across a thread ..
Re: Processing large XML messages (>100Mb) in PI 7.1
According to this thread we need to maintain a parameter
icm/HTTP/max_request_size_KB has default value of 102400 & maximum it can accept is 2097152
Please suggest on this...do we need to maintain this parameter ?
Regards
Abhijit

Similar Messages

Message stuck in inbound queue of r/3 for inbound proxy

Hi Experts,
The scenerio is Inbound Proxy.
I m using standard prgram rfbibl00 to post a document (FB01) in Inbound proxy. When the message is triggered from XI, it get stuck in inbound queue of R/3 ( SMQ2) giving the status text "Session 1: Special character for 'empty field' .
Please help to resolve this issue.
Thanks in advance.

dear experts,
did u get chance to look into this issue.
Thanks in advance.

Messages stuck in Inbound Queue with Ready Status

Hi All,
The messages in the Inbound queue are getting stuck in Ready status.
I have to manually Unlock each queue to start the processing.
After some time again all the message queue are back to the Ready State.
Please help me on this issue.
Regards
Milan

go to --> sxmb_adm
Manage Queue
Select all Queues, Activate Queues.
& check your scenarios, now it will not stuck due to this error.

Msgs getting stucked in inbound queue

Hi All,
I am doing a jdbc- xi - ABAP proxy scenario. Data is coming into the R/3 via proxy but getting stucked up in inbound queue. When I go to the queue I can find entries with msg transaction recorded. When I manually execute the entry from the queue it is getting executed successfully.
In R/3 the msgs are with a green flag(scheduled). But when i execute it from inside the queue, I can see the success flag(chequered) one.
Why am I getting this problem?
Kindly help me debug this issue.
Thanks & Regards,
Jai Shankar.
Message was edited by: Jai Shankar

Hi,
Pls make sure your queues are registered and active...
you can register the queues using the SXMB_ADM transaction and executing the link "Manage Queues" in that.
Thanks,
Renjith

Messages got stuck in inbound adapter engine queue

Hi Experts,
My senario is File - XI -SAOP reciever and we have 8 usecases of same type. For 7 usecase, we dont have any problem. But for only one use case we have having heavy delay in processing messages.
All my messages got stuck in inbound queue of Adapter engine in to be delivered state, wait state, delivering state.
Please see the below logs and suggest some solution.
To be delivered Message log :
Time Stamp Status Description
2008-06-30 06:54:20 Success Processing child message of multi-message with message ID 8c597510-466f-11dd-92f9-000f203c93e0
2008-06-30 06:54:20 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:54:20 Success Message successfully put into the queue.
Waiting Message log :
Audit Log for Message: 4864ad2b-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message I
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:16 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:16 Success The message status set to DLNG.
2008-06-30 07:46:16 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:16 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Delivering Message log :
Audit Log for Message: 4864ad2d-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message ID 7481f110-466f-11dd-b8ce-000f203c93e0
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:24 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:24 Success The message status set to DLNG.
2008-06-30 07:46:24 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:24 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Thank you
Subbu

Dear Subramanyam,
Some message might be struck in the queue. Because of this reason furthur processing is not performed on time.
Please try to do like this:
Go to SXMB_MONI, or SXi_monitor, select QueueID in the row, which is showing green flag. In the next window belongs to queue select the queue and press unlock button on the panel.
This could possibly release the queue which is struck.
Best Regards
Praveen

Files Stuck in DFS Replication Backlog

We have two Windows Server 2012 servers with several different replication groups configured to replicate different folder structures between them. One of these replication groups seems to have a permanent backlog of files stuck in the queue. the "dfsrdiag
backlog" command always shows 343 files waiting to replicate in one direction when run at the end of the day. The first 100 files are listed by the command and they are always the same files. When run during the day the dfsrdiag command shows the backlog
going up to several thousand (with the same first 100 files listed), but it always returns to 343. There is no backlog in the other direction. All other replication groups set up show no backlogs in either directions. There are no errors or warning in the
event logs to say DFS replication has stopped for that particular volume or that the files couldn't be replicated due to sharing violations. I have tried forcing replication and rebooting both servers.
Does anyone have any idea how I can get these files to replicate?

Hi,
First please check if staging folder is large enough. A recommended size is 1.5x<size of your largest file in replication group>.
Also here is a tuning guide of DFSR. Please see if it could help:
http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
Also this article provided many general steps about troubleshooting DFS replication issue. Please see:
Top 10 Common Causes of Slow Replication with DFSR
http://blogs.technet.com/b/askds/archive/2007/10/05/top-10-common-causes-of-slow-replication-with-dfsr.aspx
If you have any feedback on our support, please send to [email protected]

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

Messages stuck in SMQ2 Inbound Queue.

Scenario: File->XI->Proxy
When I put 50 files at the same time in a directory, channel is configured Exactly Once in Order and we have created queue with the name GATQUEUE. The messages are picked up from directory and sent one by one to BPM process. 31 messages out of 50 poccesed succesfully but 19 of them get stuck in the queue always. Though GATQUEUE is released lately but they are stuck in 'XBQO$PE_WS90000013' queue. This is seen in SMQ2 Inbound Queue.
Could you please tell me how to release this message which are already stuck and what bit of configuration required so that it works for 1000s of files/messages at a time?
Thanks
K

Hi Kiran,
Just add the below parameter in XI tcode : SXMB_ADM
Execure Integration Engine and Configuration.
Click on Specific Configuration, go to change mode
Click on New entries
Category : MONITOR
Parameter :QRFC_RESTART_ALLOWED
Current Value : 1
Save.
Regards,
Venu.

Inbound delivery got stuck in EWM Queue

Hi,
I have an Inbound delivery got stuck in the inbound queue, which is from EMW. The error which it failed is "Enter SLED", but the point is material is serial number managed and not batch managed. I have compared with the successful serial number and could not find any relevant field.
Can any one please let me know, why SAP is asking for SLED.
regards
Chaitanya

hi chaitanya,
Have you checked the slg1 log? might have activated something related to quality.
cheers,
jobi

Messages still stuck in the Inbound queue SMQ2

Hello XI Gurus,
All my messages with "READY" status are still stuck in the inbound queue (smq2) for the last 2 hours...there was no SYSFAIL error messages or scheduled background running. I have to manually go in and executed each of those messages, instead of automatically process it. Could someone please tell me how to troubleshoot this?
Thanks so much in advanced,
Dng

Implement SAP note 758677 for this. This exactly deals with your issue.
This Basically speaks about scheduling 'RSQIWKEX' for inbound and 'RSQOWKEX' for outbound queues.
Also, you need to set the parameter 'QRFC_Restart_ALLOWED' to '1' in the transaction 'SXMB_ADM' -> Integration engine. Its in the runtime dropdown menu.
Note : without this parameter being set this will not work.
Thanks,
Karthik
Edited by: Karthik Rangaraju on Oct 1, 2008 2:13 PM

Inbound Queues stuck with RFC errors

Hi Experts,
Greetings for the Day !
We have BDOC related issue and we need your expert help ASAP in resolving the same.
We ahev a few BDOCS lying in intermediate state in transaction SMW01, which we found using BDOC monitoring on daily basis. When we check the same in SMQR - inbound queue, we found that the queues are stuck with an RFC error message.
We are re-activate these queues to actually resolve the intermediate bdocs. But, my query is
1> The raeson for getting these BDOCS in intermediate state & stuck queues
2> A permanent resolution for the same.
Please help and let us know if you need more details.
Regards,
Kanika

Hi Kanika,
RFC error can be due to a bad connection as well. If the server is down, there might be a problem in communication with the connected system and the queues will not be processed further. You need to reactivate or unlock to get the queues processed.
But if there are any specific errors for which the queues are stuck do state the same, so that we can look into an actual resolution.
Regards,
Venkat

File to IDOC stuck in the queue

Hi Expert,
I have a file to IDOC scenario. I checked in SXMB_MONI, I can see the file coming in. But it just stuck in the queue and won't send out to SAP system. When I checked the SMQ2, it tells me the status is "SYSFAIL'. I have checked my RFC, port, logical systems, profile etc. Just don't know where is wrong. Can somebody tell me what else I need to check? Thank you very much!
Charles

Hi Charles
Check SMQ2 and double click on the queue with sysfail status.
It will show you a new screen with a more detailed error description.
Regards,
Giuseppe

Inbound Queues getting stuck up in PI7.1 for Idoc scenario Mpackg. enabled

Hi Experts,
We have an issue while processing Single Idocs in PI 7.1.
we have extended MATMAS05 and we are processing these via PI to FTP folder.
The inbound queues are frequently getting stuck.we will be sending atleast 1000 idocs every hour from R3.The processing time is very slow for this interface and its impacting other interfaces which we are currenlty having.
We have followed the webblog by William Li "Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging" but still the processing time for Single Idocs is very slow.
We have to use single idocs as we will send only the changed materials from R3.
Could you please assist us in overcoming this issue.
Many thanks in advance.
Points will be awarded for valuable feedback.
Cheers
Jyoti

Hi Jyoti,
Message Packaging works PI7.0 SP 13 and PI7.1 .
we have to configure Message Packaging manually ,
Step 1) 1. Enable packaging for the integration server
SXMB_ADM -> Change Configuration (F9), create a new entry:
Category: RUNTIME (PI7.1)
Parameters: PACKAGING Current Value: 1 (for active) .
Default Value in PI7.0
Current Value: 0 (for inactive)
Step 2) Create "Package Configuration Type u201C
Use Transaction SXMS_BCM .
Configuration Type : Any name.
Description: any text to describe the configuration type .
Wait Time : 60 seconds
Number: 100
Maximum Package Size. 2 MB
Step 3) Create "Sender/Receiver Definition
Transaction :   SXMSIF (Create New Entry).
Sender/Receiver ID:PACKAGE_DEMO .
Description :
Interface Name: Interface Name used in Receiver Determination.
Interface Namespace:   Interface Namespace used in the Receiver Determination .
Step 4: Create "Specific Package Configuration"
Transaction :    SXMS_BCONF .
Step 5: Package Monitoring
TX: XMSPKSTATCNF
Follow above steps and configire message packaging , then you feel diference,
actuualy i configured message mackaging,i am feeling the difference.
if any issues let me know.
Cheers,
Raj

Inbound Queue Stuck

Hi,
We send about 7000 IDOCs to PI. These IDOCs are sent to the PE for a ccBPM.
However, the Inbound Queue got stuck with status of the first message on "Transaction Executing". This stayed this way for 2 days.
In the end we locked and unloced the queue and every thing was running again.
But a few minutes later all the data was punt into the BPM queue and nothing was happing. (first record had status "transaction recorded"). I had to activate the QIN scheduler and everyting was running again.
This is happening in a production environment and is not acceptable (processes run at night).
Does somebody have hints where to start looking or have a solution?
Ron

Check this blog :
XI : How to Re-Process failed XI Messages Automatically
Note 527481 - tRFC or qRFC calls are not processed
Regards
Gangaprasad

Exchange 2010 inbound email (external/internal) randomly stuck in delivery queue

Dear all,
We got a problem email is not deliver to mailbox normal.
For example. I send a email to recipient A,B and C in same internal email.
The result is A can receive email normally, but B and C email is stuck in delivery queue.
We need to re-start the CAS transport service to release the email from delivery queue.
Any idea for this kind of email deliver issue?
Exchange server environment:
1. Two CAS/HT server in NLB mode (Exchange std. ver.)
2 Two Mailbox server in DAG mode (Exchange Ent. ver.)
We got this issue around 12 months on production migrate from 2000 to 2007 to 2010.
Felix.

hi,
What's the last error in the queue viewer? Do you have some error code?
You can use message tracking log to find more information about your issue.
If you create 3 new users and send a test mail to they, can they always receive the mail. May be your user account have some problem.
we need more information about your issue. Always is the stationary users or it is randomly?,The frequency of occurrence and so on.
hope can help you
thanks,
CastinLu
TechNet Community Support

545 mb file stuck in inbound queue

Similar Messages

Maybe you are looking for