5530 XM would not connect to wifi

I just got my new nokia 5530 XM yesterday, and I've been trying to connect to wifi since i got it, but it would just not connect. it does detect my WLAN but after I enter the "Pre-Shared key" it says "unable to connect, WLAN not found" I already try everything I could.
any suggestions???

Are you close enough to a WLAN accesspoint? Check MAC filtering, SSID and DHCP.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • Restored Ipod will not connect to Wifi but all the other devices in my house do.

    I restored one day to factory setting cause i wanted to delete all my junk and so when i got home it would not connect to wifi. Before I restored the wifi my ipod worked fine but now i cann't connect. Please help me I have tried everything and am getting really frustrated.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have lost my iPod touch however it was not connected to wifi network , how do i find it . A reply would be very appreciated

    I have lost my iPod touch however it was not connected to wifi network , how do i find it . A reply would be very appreciated

    you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                              
      - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

    Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

    Take it back for a refund.

  • If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

    If, using an iPad connected to wifi, I made a call to an iPhonxe 4S not connected to wifi using FaceTime, would it cost the person using the iPhone anything?

    At your end you will be using your WiFi signal. At the other end the iPhone would be using the 3G cellular signal. The cellular plan would need to be provisioned to allow FaceTime calls over cellular.

  • What would cause iPad to suddenly not connect to wifi

    all of a sudden both iPad and ipad2 will not connect to wifi.  have matched everything up and also reset modem

    There have been many reports here of the wifi failing on ipad2's that are running ios8. It has been speculated that ios8 is the culprit but I've not heard anything definitive. Since both of your devices have failed I would check the router first by going somewhere that has free internet or friend or family that has one. Staples and stores like it generally has free internet access if you have something of the sort around your area. It will help to point you in the right direction in telling you if it''s the router or your phones if you don't have luck with basic trouble shooting.  Good luck.

  • My IPhone 4s will not connect to wifi, what can I do?

    My IPhone 4s will not connect to wifi, what can I do?i have tried network reset, turning wifi off and on but my phone will not connect to any network.

    Hi jazznola9,
    Welcome to the Apple Support Communities!
    There are several steps you can take when troubleshooting Wi-Fi connectivity on an iPhone and it sounds like you have already done a few of them already. In your situation I would recommend reading over and working through the steps listed in the attached article.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Have a great day,
    Joe

  • Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

    Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

    Please take a look at this Apple support document to see if it help solve your issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
    Using iPhone

  • Hi. I have an iPhone 4 and no data plan.  When I'm not connected to wifi I don't receive iMessages, but later when I do connect to wifi, I get them telling me they were sent earlier. I don't remember how long this has been happening.  Any Help?

    Hi. I have an iPhone 4 with iOS7 and no data plan. When I am not connect to wifi I don't receive iMessages, but then when I do connect to wifi I get the messages telling me they were sent earlier.  Is there any thing I can do to fix it?  I don't remember how long this has been happening but it is very frustrating. Any suggestions would be great! Thanks!!!

    If you don't have a cellular data plan, then why are you expecting that you will have an active internet connection unless you are connected to wi-fi?
    iMessages require either wi-fi or a cellular data connection.

  • HT5569 My iphone does not connect to wifi I did everything like updating the software but still nothing works for me any can help please, it is 4s.

    I Can not connect to wifi, I did all basic things like restart, reset settings, updates software... Nothing works please help!!!

    Hi Alisadat,
    Welcome to the Support Communities!
    It sounds like you have intermittent Wi-Fi connection if you were able to update your iOS to 7.0.2?
    Although you have tried some troubleshooting steps, I would suggest following the guide below in order to attempt to resolve this issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    - Judy

  • Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

    Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
    On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
    Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
    If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
    (3) Start up in Safe Mode
    http://support.apple.com/kb/HT1455
    I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
    (4) Create a new admin user account in System Preferences Accounts pane
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Log out and log in to the new account. Try connecting with AirPort in the new account.
    (5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
    That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

  • Macbook will not connect to wifi, an environmental issue with wifi?

    Macbook running OSX 10.85 will not connect to wifi, Apple support thinks it could be an environmental issue.  Am connected to wifi right now in recovery mode.  Has this happened to anyone else?  What did you do to correct the issue?  Also, 2 iPhones and an iPad connect without issues.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article. If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Run Software Update and install all available updates for OS X or your computer's firmware.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it. Note: this is not applicable to OS X 10.9 or later.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Hello, when I tried to restart and diagnose my computer it would not catch my wifi. Is there another way I can do it?

    I tried to do diagnostic test on my macbook pro mid 2012. But when I got to the internet connection screen it would not catch my wifi. Is there another way I can do it? Also, when I click on about this mac it does not open up.

    you can try signing out and back in.  if you are on mac i've seen posts here where they had to do something to fix, but i cant remember what exactly.
    you can also try direct download from here
    All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools

  • Transfer while not connected to wifi

    I often download podcasts to my ipad while connected to wifi, I'd like to transfer those podcasts to my itunes when I'm not connected to wifi but itunes doesn't seem to let me. Is there a step I'm missing?

    If you go under Manage Connections on your homescreen then go to Mobile Network, there should be a box for Data Services.  If you put that to OFF, your internet data will cease but your phone calls and SMS capabilities should not be affected.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Maybe you are looking for

  • Brand new ipod touch will not sync?

    Bought a brand new ipod touch.  Tried to sync to iTunes on my computer.  Checked all music in library, clicked sync, ipod says it is syncing, computer says sync is complete, but there is no music on the ipod.  Have repeated process a dozen times.  Ha

  • Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

    Hi     According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.

  • Creation of infotype having Subtype

    Hi ,       Please tell me link or document regarding  creation of  infotype having subtype .       i know how  to create simpe infotype . But not created any infotype having subtype.

  • Error occuring when trying to open links in PDF

    I have recently upgraded to Acrobat X and have been creating links in my PDF documents as I have previously done with earlier versions.  However when other users are trying to open the links via reader (version X) they are receiving the following err

  • Sequence playback on TV monitor problem

    I've been having trouble getting HD sequences to playback on a connected TV (Standard DV plays back fine). The tape deck and monitor are connected via component cables, and playback is fine while playing HD footage in the deck. In FCP, I change the e