6024e DAQmx counter data

hello,
I try to use the NI DAQ taraditional example to control my DAQ6024E, but it doesn't come out any data. If I use DAQmx, I can get the data.
Now, I have to use the 6024E counter to control the time event and record the analog data at the same time. I only know how to get the clock data by the traditional DAQ. Since it can't combine with DAQmx, could anyone please tell me how to get the clock data by DAQmx??
thanks

Hi Sai,
When you say "get the clock data," what are you referring to? Can you tell me which example you used to get the clock data in traditional DAQ? Are you referring to the sample clock and number of samples written? Or something else?
Thanks,
Sal

Similar Messages

  • Servo motor encoder pulses/counter data erroneous

    First off, I am very new to using labview.  I am trying to complete a project a former employee was working on.
    For a quick background on what I am working with, I am using a NI DAQCard-6036E connected to a SC-2345.  The SC-2345 is then connected to a load sensor, Omron R88D servo driver, and an omron servo motor.  The servo motor has a incremental encoder with a resolution of around 2048 pulses per revolution.  My labview program includes a counter that records the data from the encoder on the servo motor.  I have been able to get accurate data when testing through the measurement and automation program by manually turning the motor.  Also when running through the specific DAQ assistant I am using for my counter, I am getting correct readings when manually turning motor.  Once I run my complete program, instead of getting 2048 pulses per revolution, I am getting between 34000-36000 pulses per revolution.  The most logical assumption is that I am getting vibration in the motor itself or some sort of noise is interfering with my signal.  I first attempted to change any possible settings through the omron servo driver that might reduce any vibration in the motor.  I attempting changing the rigidity settings, turning on and off the auto-tuning function, and a few other settings specified by the user manual that might cause vibration.  If I turn the rigidity settings as low as possible, I am able to get around 2000 pulses per revolution, but the data is very sporadic. Also, my equipment needs to be very rigid, and with the lowest rigidity setting for the servo driver, I am able to almost stop the motor with minimal force.  My equipment needs to be able to travel at a near constant speed with fluctuations of up to 200 N of force.  Any suggestions on which direction I should go in finding a countermeasure? 
    Thanks
    Solved!
    Go to Solution.

    The model number of the servo motor is R88M-W10030L.  The servo motor rotates at a constant speed.  The program is designed to drive the servo motor connected to a ball screw in one direction.  Once the load sensor reaches a desired load, it will reverse at a constant speed until no load is on the sensor. Throughout, it records load vs. displacement.   I have found a few things that will alter the pulses counts.  If you apply resistive pressure on the servo motor while it is rotating, the pulse output will vary.  Also when you apply pressure to the casing of the servo motor itself, the pulses will often jump around. I was almost certain my false pulses were caused by vibration.  After have no success adjusting settings to reduce vibration(according to the user manual), I ran the program while moving around several wires to see if any were loose, etc... After applying force to the power lines and encoder cable, the program ran several times with an average of 2000 pulses per revolution and would actually subract pulses while going in reverse(what I want it to do); Although the average was around 2000 pulses per revoltion, i saw positive and negative jumps in pulse counts while traveling forward at constant speed.  Today I re-wired the equipment, seperating as many wires as possible.  After the re-wire, the equipment/program is back to sending 34000+ pulses per revolution, and does not subract pulses while reversing.  I have read the 'Using Quadrature Encoders with E Series DAQ Boards' article.  Referring to the article, I am running similar to "method 1".  I am already using a signal conditioning box, but have the counter data run directly through. Do you believe running the signals through a SCC-CTR01 might solve the problems? 

  • MICN Planned Count Date

    We are having issues with the planned count date in MICN. We have the float & interval set as 4 days in the configuration.
    we have posted a physical inventory document on 04/09 and when i try to create a new inventory document for 04/16 in MICN, system is changing the date to 04/18. I am not sure why it is jumping 2 days ahead. Did anyone face similar issue?
    Please let me know.

    Figured it out. Its because of the factory calendar setting.Saturday/Sunday was set as non-working days,so when we put the Saturday as planned count date, system was taking the next working day which is Monday.

  • Inventory: Movement after count with post date before the count date.

    Hi,
    We have stock movements all the days of the week.
    We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
    Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
    We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
    How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
    Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
    Thanks in advance for your support!!

    SAP takes the book inventory in the moment you enter the count.
    Best you set  block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
    If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
    This is not a good way if you still have movements after inventory document creation and actual count.
    You have to make sure - organisational  wise, outside SAP - that all movements that happened before inventory count  are posted before you start entering the count. There is nothing in SAP that can help you in this case.

  • Last count date conversion

    Hi SAP experts,
    We have a field available in legacy with the last count date (per material and plant). We would like to load this date in the last count date field in MARD table so we can continue our physical inventory schedule for this year. How can we load this last count date in SAP?
    Thanks and regards, Jose Oyon.

    Hi,
    We are using split valued materials and the date of the last count field is in table MCHB (Batch stocks). In the BAPI we are using to load the material master data, this table is not available. MARD and the date of last count field is available in the BAPI so we are okay to load this date of last count field for non-split valued materials. How can we load this field for split valued materials?
    Another concern I have is that we are doing a direct table update by entering this date in MARD or MCHB. Are you guys aware of any negative consequences?
    Thanks and regards, Jose Oyon.

  • Can I change the count date for a PI Document?

    Dear All,
    By mistake, I entered count date as 30-Sep-2010 instead of 01-Oct-2010 while entering count for a PI document.
    Now, Can I change the count date to 01-Oct-2010 ?
    The issue here is I am not allowed to post the difference today since the count date belongs to the previous period which is 09 2010.
    pls suggest how can I resolve this issue?
    regards,
    Shetty

    Hi Shetty,
    I am assuming your issues is around posting the PI document and the count date  i.e.Posting period is in last month and hence you are stuck.
    If your client is ok to perform posting in previous period then try MMRV and allow posting in previous period and complete the Inventory counting posting and adjustment (write off differences and revert back the settings)
    Other option would be to  used above suggestion post PI doc without difference. Then create new PI document with correct count date.
    Hope this helps.
    Thx
    MJ

  • How do I recover play counts/dates, etc?

    I just reformatted my pc. Assuming I do have the iTunes program folder backed up somewhere, what file(s) do I need to recover to restore the play counts/dates from my old library?
    I imported the saved .xml file, that shows all the files, playlists and ratings but does not show play information.
    My library has 50000+ songs, I normally listen to things based on play count. I really need to get this back.
    Thanks.

    I did have that folder backed up, but there are no .itl files.
    The .qtr file looks like the best to me, any other suggestions?
    L:\DataKeeper Backup Of E\Program Files\iTunes\
    About iTunes.rtf.zvaa.dkb
    About iTunes.rtf.zvab.dkb
    Acknowledgements.rtf.zvaa.dkb
    Acknowledgements.rtf.zvab.dkb
    ITDetector.ocx.zvaa.dkb
    ITDetector.ocx.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\CD Configuration\
    gcdrdll.cfg.zvaa.dkb
    gcdrdll.cfg.zvab.dkb
    gcdroem.cfg.zvaa.dkb
    gcdroem.cfg.zvab.dkb
    gcdrtype.cfg.zvaa.dkb
    gcdrtype.cfg.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\
    iTunes.qtr.zvaa.dkb
    iTunes.qtr.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\da.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\da.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\de.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\de.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\en.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\en.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\es.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\es.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\fi.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\fi.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\fr.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\fr.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\it.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\it.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ja.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ja.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ko.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ko.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\nb.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\nb.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\nl.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\nl.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ru.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\ru.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\sv.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\sv.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\zh_CN.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\zh_CN.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\zh_TW.lproj\
    iPod Help.chm.zvaa.dkb
    iPod Help.chm.zvab.dkb
    iTunes Help.chm.zvaa.dkb
    iTunes Help.chm.zvab.dkb
    iTunesLocalized.qtr.zvaa.dkb
    iTunesLocalized.qtr.zvab.dkb
    Localizable.strings.zvaa.dkb
    Localizable.strings.zvab.dkb
    L:\DataKeeper Backup Of E\Program Files\iTunes\iTunes.Resources\zh_TW.lproj\iPodSettings.nib\
    classes.nib.zvaa.dkb
    classes.nib.zvab.dkb
    info.nib.zvaa.dkb
    info.nib.zvab.dkb
    objects.xib.zvaa.dkb
    objects.xib.zvab.dkb

  • Cycle count dates upload from Legacy.

    Hi,
       In my client there is a requirement to upload the last count date from legacy to sap at the time of cutover. This they want as after inventory load they dont want to start counting everything which A kind of materials. Client is asking, since i have this date, so keep this date in SAP & then calculate the next date in SAP after go live from that date.
    I searched all the places & found that since the field is internal i really cannot populate this. Is there any standard program or some how create one program to upload this date. If yes then plz let me know. If you had used this methodology, then kindly provide me the details.
    Thanks in advance.
    Avas

    Create additional CC indicator with 'No of Physical Inv' as zero and use this one to maintain the materials that already undergone cycle counting before go-live. Also, have the CC indicator as fixed for these materiasl in material master -> Plant data. When you run ABC analysis (MIBC), these CC indicators won't be changed and as they 'No of Physical Inv' as zero, they won't be part of your cycle counting. When you need these materials to be part of cycle count, change the CC indicator as fixed and run MIBC, now system proposes the cc indicator based on consumption/usage.
    Or
    You can keep a block for the materials that already undergone cycle counting before go-live in MBEW-SPERW through transaction MM17 or MASS.
    Please award points if useful.

  • Physicl inventory count date

    Dear Friends,
    Is there any standard report or table which gives the last physical count date for materials with selection of plant and storage location.
    Best Regards
    Varsit

    Hello Varsit,
    Addition to Ramki's response, last inventory date will be available in the following tables
    MARD - If you are managing inventory at IM level (Field DLINL)
    LQUA - If managing inventory at WM level (field IDATU (only for CC)
    Hope his helps;
    Regards
    Arif Mansuri

  • Merge counter data with analog data

    Greetings,
    I need to measure a variety of analog signals and RPM signals and save the data to a file. I had intended to use counters for the RPM signals. The problem is that the counters use implicit timing which is totally asynchronous to the ai sample clock. Therefore, there is no time or sample correlation from the counter data to the analog data. I would like to merge the counter data with the analog data into a waveform array. Does anyone know of a method that would allow such a merger?
    Phillip Neir
    GM Engineering

    Thank you for your response. I understand what you are suggesting and have used that technique before for displaying data. The first, and foremost, problem is that there is inherently no timestamp and no regularity from most frequency/period measurements. Thus, there is no time relationship to other channels. I was hoping for a technique that would synthesize a waveform from asynchronous, non-regular data that could be related to other waveform data. This may be an insurmountable problem and I may just have to revert to frequency-to-voltage converters.
    Phillip Neir
    GM Engineering

  • Please help - shuffle has stopped updating play count & date last played

    All of a sudden these features have stopped working. (I've had this shuffle since January and it worked just fine till last week.) If I play a tune from iTunes on the computer, the play count & date are updated; but if I play a tune on the iPod, this information doesn't change as it used to. Can anyone help me out? I've already restored etc.

    I had a similar problem and was able to recover. I deleted all files on the iShuffle including the hidden ones. On Windows I killed the iPodservice and iTuneshelper processes. That allowed me to view the iShuffle memory in an Explorer window. Blow away all of the files and directories. (Be sure they are not hidden.) Pull the iShuffle out, launch iTunes (to restart the services - or reboot to play it safe), and plug the iShuffle back in.
    Hope this helps!

  • Inventory count date

    How to change inventory count date once saved ?

    I hope you cannot change once saved
    delete and create new one
    Edited by: Rajesha Vittal on Jan 8, 2008 8:30 PM

  • What are the units of the DAQmx counter?

    Hello,
    I created this VI and several similar ones a few months ago, but, I have forgotten some of what I did back then.  I believe that this VI should measure period, using the counter on the DAQ chassis.  Can anyone tell me the units of the period measured?  I think it is seconds, but, I am trying to figure out how to figure that out!  The values of the period are generated by the DAQmx READ function in the WHILE loop.  What units is that function outputting to the array?  What are the units of the array elements, essentially?  See the attached VI.
    Also, how do you know?  I opened the DETAILED HELP for the DAQmx Read (Counter 1D DBL NSamp) shown in the VI but, I can't find anything on the units of the data coming out of the terminal labeled DATA with the orange wire, which is actually an array of periods, and we take the average of the most recent 15 or so period measurements.
    I had a suggestion months ago for an online NI manual containing a description of Buffered EdgeCounting measurements, but, when I went to find it, the link had been changed by NI, so, I can't find that manual, but, I think the answer is probably there, because I recall that manual being very useful when I did this before.
    Thanks for the guidance.
    Solved!
    Go to Solution.
    Attachments:
    continuously measure period buffered_singlechannel_forum Nov 13.vi ‏33 KB

    HI dav2010,
    When you create a Virtual Channel, you should specify the units the counter task will use.  There are several options which are listed in the help here:
    http://zone.ni.com/reference/en-XX/help/370469AA-0​1/lvdaqmx/mxcreatechannel/#DAQmxCreateChannel%28CI​...
    I am not on a computer with LabVIEW right now, but I believe the default should be ticks, which is the number of ticks of your device's timebase.  You can find that information in your hardware specifications.
    Regards,
    Chris E.
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • Counting date transactions for last six months

    Post Author: crystalrook
    CA Forum: Formula
    Any help is greatly appreciated.  I am running Crystal XI.
    I have an order field (PurchaseOders.PODatePlaced) for each item. There can be multiple orders in the same month for each item of course.  I would like to COUNT each  PurchaseOders.PODatePlaced based on the month it was purchased for the last six months from a date parameter.
    My table looks like this"
    Item            PODatePlaced
    1234           11/12/2007
    1234            11/20/2007
    1234            10/15/2007
    1234            9/30/2006
    1234            12/5/2007
    1234             12/6/2007
    I am trying to get the results to read as follows (only for the last 6 months):
    Items          December         November     October
    1234               2                      2                1
    Thanks for your help

    Post Author: crystalrook
    CA Forum: Formula
    I am adding a cross tab to an existing report so many of the fields are already in the report. I would like to only add the month fields and a count of the transactions. Can this be done?  In the group options how can I tell it to only use the last six months reguardless of activity for the month.  Current results are giving every date as a column.  Can I only get the months to be columns?
    Any suggestions?

  • Savings play counts/dates added?

    Hi, I'm going through the process of re-installing Windows XP on my computer, which means I'll have to back up all of my music on CD's, but I really want to keep my play counts and my dates added for my music when I add it back to the computer...is that what I use the Export Song List/Export Library for?

    If you're using iTunes to do the backup, and you select "Backup the entire library and playlists", one of the files it should copy to the CD/DVD is "iTunes Library.itl". This file has all your playlists, play counts, etc.
    See:
    http://docs.info.apple.com/article.html?artnum=302392
    If you're not using iTunes to do the backup for some reason, then make sure to copy that file. It is located (by default) in <pre>My Documents\My Music\iTunes\</pre>
    In fact, you should backup that entire folder.
    If you backup the ITL file, then you don't need to export your playlists. But FYI:
    http://docs.info.apple.com/article.html?artnum=93763

Maybe you are looking for

  • Transformation - select package in PSA

    Hi, is it possible to select the PSA package durring the DTP run. The problem is, when we have more then one package already in PSA and DTP by default takes all of them and load them in the InfoProvider. You should always check the PSA first and dele

  • [Struts] Reload the same page but scroll automatically to where it was

    Hi, I have a form and it is quite long with a vertical scroll bar. Now when the user scrolls down and changes a value, I need to reload the same form with other values and display it to the user. When the form reloads, it should not show the top of t

  • My mail application keeps shutting down after a few seconds

    I am all of a sudden having this issue with my email quitting unexpectedly and I can't have it open long enough to even read an email or see what emails are there. I need to see my email folders and can't access them please help! I ran the report and

  • Can't activate Adobe Digital Editions

    Whenever I try to activate my account it says, E_ADEPT__REQUEST_EXPIRED http://adeactivate.adobe.com/adept/ACTIVATE 2010-07-08T 10:0342-07:00%20 (1278608622000) is%20before%202010-07-08T21:32:53-07:00%20(1278649973599). I've tried all options that's

  • Finding real Client IP Address under PROXY Server

    Hi friends, I have a requirement to find out the Client IP Address that is under a Proxy Server.( Actually I used the getRemoteAddr but this always returns me the Prox-Server IP Address and not the real Client IP Address) Can some one guide me how I