60Gb iPod won't play songs with bitrate 80kbps or less

Hello,
My 60Gb iPod will no longer play songs encoded with bitrates of 80kbps or less. I think the problem started after I upgraded iTunes to v7.0.2(15) and the iPod to v1.2.
If I try to play one of these songs the iPod screen goes black, then the Apple logo appears, and after about one minute the main menu reappears. This happens every time, whether I select the songs in the "Songs", "Artists", Albums", etc. categories, or if one of these songs are encountered in a playlist.
It also happens whether the files have been bought on the net from eMusic, encoded in iTunes from my own CDs, or from any analog source. I have a lot of old lo-fi jazz recordings which I have encoded in mono to save hard disk space, and these songs played OK before the upgrade.
There seems to be one exception, however: Podcasts seem to play OK.
I have tried the soft reset on the iPod (the "menu" and "select" buttons for 6 seconds).
Any others having this problem?

Pity, I needed the bass boost in the headset.
Hope this will be fixed in the next upgrade, then.
yeah, it's not an optimal workaround.
perhaps try keeping an eye on the following document:
Articles modified in last 7 days
if the "mono mp3" document shows up in it again, perhaps check to see if a better workaround (or a proper resolution) has been announced.

Similar Messages

  • IPod Won't Play Songs, Videos Reset it, and it's Quite Sluggish

    I have a 30GB video iPod (the old version). Everything was working fine until a few days ago, when the power on my iPod ran out because I fell asleep while listening to it. The next day when I turned it on, it said "Connect to your Computer, Use iTunes to restore" So I promptly did that, and it worked fine until I tried to play a video on it. It showed a blank screen, so I reset it by pressing the Menu and Center buttons. Then it showed the "Connect to your computer" screen again. So I restored it, and it would be fine until it locked up again and showed the "Connect to your computer screen" again. I left it alone for about eight hours, and when I tried turning it back on again, it was back to normal.I've seen that screen probably 10 times in the past 4 days, and I've restored it, just as many times.
    Here's the list of problems I'm having:
    - the iPod won't play some songs when I click on them. It will show the Playing triangle in the upper left corner, but I hear no sound and the seeking bar doesn't move. I'll often have to click the Pause button, then hit it again to Play it, and then it will play the song.
    - The iPod is extremely slow. When dealing with songs or videos, it often takes a minute or more for the iPod to respond to my button clicks. Its hard drive isn't full, though; in fact I'm only using about 2 GB.
    - Videos lock up the iPod. Just about any time I want to play I video on it, it will show a blank screen and won't respond. Then I have to reset it and I get the "Connect to your computer" screen again. These aren't videos in the wrong format or anything, these are the same videos I've been playing on my iPod before with no problems, until recently.
    - Battery life is horrible. Although it hasn't been fully drained yet, judging from the power meter and how long I've been using it after it's fully charged, I'd guess it would only last about 2-3 hours. I would think it should last considerably longer, as the iPod is only about 3 months old.
    Has anybody been experiencing similar problems, or know what I can do to fix it?

    I've still had the same problems, but now when I try and turn on my ipod, it tells me to restore. When I do go to restore, itunes says that it cannot find the file needed to restore my ipod. The ipod itself also tried resetting itself, I guess, made it to the menu that asked what language I wanted it in, and then restarted again. This went on for an hour and a half, and I could't do anything. Is my ipod a lost cause?

  • IPod won't play song all the way through?

    My iPod Classic skips a song at the 1:22 mark (shows the correct 7:04 running time) and begins next tune. One song out of 3,000 or so. Interesting.
    What's up with that?
    Thanks in advance.

    Hmmm.  Does this problem track play okay in iTunes? 
    Either way, I would try downloading a fresh copy of it again from iTunes via iCloud as explained in this Apple support document.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Then remove the originally downloaded version and sync the new one over to your iPod Classic.
    B-rock

  • IPod won't play songs that were lost on my PC from drive crash

    In January my hard drive crashed (Win2000) and I lost all the music on my PC. NO big deal, replaced the hard drive and restored my CD's, figured I could just play my purchased music from my iPod.
    the problem is that SOME (not all) of my purchased music now won't play on my iPod even though the songs are physically there ... this started after iTunes 6 came out ... but different songs seem to play on different dates ... it is very weird. Today I sorted by "date added" and discovered that anything purchased between 6/22/05 (my birthday, coincidentally or not?) and 12/31/05 will not play on the iPod ... UNLESS I had copied the song to a CD and restored to my hard drive from the CD.
    Songs that I have purchased since replacing the hard drive worked for a while, then wouldnt' work, but I could delete the song from my iPod and re-copy from my PC. Obviously this won't work for all the music that I lost though!
    Music from this account is authorized for 4 devices so that isn't the problem, any suggestions?
    Thanks!

    If you have made sure that both the iTunes and iPod software are current and have deauthorized and reauthorized your computer, try this:
    1. Deauthorize the computer.
    2. Create a new user in the system.
    3. Download the free song of the week from the iTMS in the new user account.
    4. Play the song in that user account to authorize again.
    5. Restore the iPod (using the iPod updater) in the new user account.
    6. Sync just the free song of the week and see if it plays on the iPod.
    If it does, you appear to have a corrupted iTunes library file, and you should recreate the iTunes library file in your normal user account, and then sync your music back to the iPod and all should be well.
    The following articles will help you.
    Authorization and Deauthorization.
    How to create a new user account in Windows.
    How to restore the iPod.
    How to recreate your iTunes library.
    "Music from this account is authorized for 4 devices"
    Not sure what you mean by "devices". It's computers that are authorized for purchased music not iPods/

  • Ipod won't play songs and I have a red square in a red circle next to every single one of them.

    I have tried all the reset options to no avail. It is now about as useful as a chocolate tea pot. Anyone know how to fix this?

    SOLUTION: circle with red square Some Music Won't Play After...: Apple Support Communities

  • Ipod won't play songs

    Okay, i've recently had to restore my ipod, which went along just fine. After all that was done, I started to put songs onto my Ipod from my purchased / podcast section; and then tried to eject it, in which a following error came up saying "cannot be ejected because it contains files that are in use by another application". So, I pull it from the port anyways to see if the songs are still on the Ipod; in which i get the Green/orange/green/orange/green/orange sequence (No songs on ipod). I put it back onto the Dock, and my Ipod says that all the songs are on it. And this time i can safely eject it, yet i still get the light sequence of no songs?
    The Ipod is updated to the most recent update, and everything syncs up well with it; i am completely lost as of what to do as this point, so any help would be appreciated.
    IPod Shuffle   Windows Vista  

    Marc Wecker,
    If your Windows-based PC shows songs, but the iPod
    doesn't seem to have songs, it is most often this
    issue that has been acknowledge by Microsoft. The
    kbase article below also links to Microsoft's kbase
    article on it. The Apple kbase article also has a
    suggested work around:
    http://docs.info.apple.com/article.html?artnum=93499
    Hope this helps,
    Nathan C.
    This did not solve it for me ever,any over thoughts overwise apple are gonna have to think of a fix look how many people have this problem !
    thanks for your help anyway this is the first weve heard from an apple representative

  • 6th gen ipod won't play songs in order?

    My 6th gen ipod, The little square one,
    I have playlists, but it does not play the songs in order - so why even have a playlist? Did something in the updates to iTunes change this? Plus there are no settings either in my iTunes which is up to date on my iMac (Maverick 7.1.1) which allow my to assk for this when syncing nor is there an option on sad little gen 6th. (I soooo regret I wore out the battery on my gen 5 nano).
    Anyone?
    Thanks!

    Hey esmeglass!
    Is it possible that you simply have shuffle turned on while playing your music? Try using the user guide for your iPod, found below, to determine if shuffle is turned on and how to turn it off:
    manuals.info.apple.com/MANUALS/1000/MA1551/en_US/iPod_nano_6thgen_User_Guide.pd f
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Ipod won't display song info under "Now Playing"

    I searched for this, but couldn't find an answer. My 60GB IPOD works fine, plays fine and displays info (and movies, photos, etc.) correctly in all areas except the "Now Playing" screen, at which point it won't display any info (song title, artist, album art, etc.)
    Any thoughts?
    Thanks,
    Patrick

    My ipod had this exact same problem.
    Go here:
    http://docs.info.apple.com/article.html?artnum=303130
    hope that helps!
    Windows   Windows XP   Sucky Computer

  • Please HELP! iPod Nano won't play songs

    I just got my iPod nano yesterday and absolutely loved it. I took some of my friendssongs from his PC. Then I tryed using ipod agent to put them into itunes. It said that there was an error. Now when I chose a song the song will come up, it won't play, but instead go to the next song and same thing happens. Now itunes won't even recongiz or pop up when it is plugged in

    The iPod is designed to sync to one computer as it copies the music to a special file for the iPod OS and software to play.
    You can enable "disk mode" and use that to transfer any file back and forth, but the iPod won't play music files stored in the "disk mode" portion you set in iTunes Preferences with the ipod plugged in.
    Basically the software you used to transfer the music out of the "special file" back into iTunes is not authorized, it's a "hack". So Apple routinely disables the hacks because of agreements to protect the music from piracy.
    Another thing is the music you got from your friend may indeed by ACC/"Fairplay" copy protected music bought from the iTunes Music Store, unless your computer is one of the five authorized, it won't play.
    Also because you hooked your iPod to your friends PC, the "ownership" might have changed and Apple may have employed something that your iPod is no longer recognized as yours.
    What you probably have to do is use the iPod software to "reset" your iPod, clear out everything in the process and just hook it to your computer.
    If you want to transfer uncopy protected, non-copy righted "free" music to your computer from another computer, enable the iPod's "disk mode" and set a size to balance between the music in your "special file" and the needs of what you intend to transfer.
    Once you get home, transfer the music files into your iTunes, then you can copy them to the "special file" so the iPod can play them.
    It's a bit complicated, but's it's designed to prevent mass theft of music (so the artists will provide their music online) and keep the benefit of syncing/playlists in line.

  • Repaired screen and now iPod won't play

    I replaced the broken LCD screen in my son's 1st gen black nano. It looks beautiful! There is a problem with the ipod now though. The iPod won't play. Everything works perfectly...screen is bright and beautiful, click wheel works to move through all menus, change volume, etc. You can choose a song, but the song won't play. The little triangle that stands for play is in the top left corner like it wants to play, but the status bar that tells you how long the song is doesn't move at all. You can fast forward through the song manually, but it won't play.
    I have reset the ipod by toggling the hold button and pressing the select and menu choices from the click wheel. I have done the 5 R's that Apple suggests. I have even restored it to original facotry settings. iTunes can see it and re-downloaded all of the music onto it. All of the software on the computer is updated and the ipod software has been updated. Everything works fine except it won't play!
    When I had the iPod open and was working on it, there were 2 ribbon cables that needed to be connected, 1 was the click wheel cable and 1 was the LCD screen cable. I have attached those securely and both are working properly except for the matter that it won't play songs. There was 1 other flat copper cable that seems to be glued to the click wheel that I didn't see in any of the pictures in the repair manual. It's not a ribbon cable. One end is still glued to the click wheel, but the other end is loose. This is probably the problem. I don't remember disconnecting this during the repair, although I know it had to be connected somewhere. I reaches up close to where the earphone jack is. Does anyone have any idea where this flat copper cable is supposed to be connected? I would appreciate any help you can give me! Thanks!
    iPod 1st gen black nano   Windows XP  

    Here is the URL for the picture of the copper cable. The dark part at the end of the copper cable is a piece of silver metal mesh that is glued on one side of the copper cable. You can see that it is glued at the other end to the back of the click wheel underneath where the battery was glued down. I vaguely remember that it was connected to something else, but I don't remember disconnecting it because I was so intent on getting the ribbon cables disconnected without damaging them.
    http://i124.photobucket.com/albums/p28/valdezs321/DSC04511.jpg
    1st gen ipod nano   Windows XP  

  • IPod won't play purchased music from iTunes Store

    My iPod won't play purchased songs from the iTunes Store. They play on my computer, using iTunes, through the iPod, but my iPod won't play the songs with headphones, or in my BOSE speaker station, nor in my car using my Belker radio adapter. I've purchased a few songs before, and haven't had this problem. I wasn't prompted, as I have been before, to enter in a password before playing the songs.

    i have the same problem, and i looks like there are another 4 or 5 discussion threads with the same prob. my ipod is about 14months old, got one of the first 4th generations when they came out -- have never had a problem, then when i downloaded itunes 6, all of a sudden everything i have purchased since then plays fine on my computer and just keeps scrolling thru and not playing on my ipod. very very frustrating. i have tried everything, right down to a complete restore on it, and nothing helps. also, when i downloaded itunes6, my purchased music playlist disapeared -- i spent 2 weeks and 5 emails going back and forth with tech support because they wouldn't address the issue, and am wary of going to them with this one. i thought the drive or memory on the ipod was corrupted and was going to buy another one, but now i'm not so sure -- is anyone having this issue with a 5th generation? because what it looks like is itunes 6 downloads may not be compatible with 4th G, and that makes me a little cranky. any one find a solution for this yet?
    hp pavilion   Windows XP  

  • ITunes won't play audio with mp4 or mov video

    I have wasted many frustrating hours now trying to get iTunes to play mp4 and mov videos but can't get any sound. A few months back it was working fine. Tried ALL the suggested fixes like uninstalling, updating and checking all the MIME/File boxes. When I went back to QT 7.5 and played the files independently of iTunes everything was fine. Quicktime  7.6, 7.67 & 7.7.1 do not play the audio independently or under iTunes and of course iTunes won't play video with QT less than 7.7.1. The same mp4 videos uploaded to my iPOD work fine. I currently have iTunes 10.5.3.3 installed on a Windows XP SP3 on an e-machines pc. Ideas please!!

    I got this problem as well. Seems as soon as I moved to version 7.6 it stopped playing my video audio. My music plays fine, but my video audio is non-existant. It's not the file itself because I can play off my iPod (though not off my iPod through iTunes) just fine. I've done all the suggestions above and NOTHING has worked. Is there anything else we can find???

  • Help! Ipod won't shuffle songs, the song cover flow disappeared!!

    Anyone, please help me. I am new to Ipod. I have 8 GB Ipod Nano, bought two weeks ago. I recently purchased more songs and currently have 50 songs on my play list on my computer. So last night after I bought the songs and transfered and sync all those songs, my Ipod worked fine (I could listen to all the songs, shuffle the songs, see all the cover flow, etc). This morning, after I fed my kids, I grabbed my Ipod and started listening to my songs and it worked fine - nothings wrong, until in the middle of playing one song, all of the sudden the song stopped playing. I thought the battery had died, but when I checked, the battery was still half full. So I went back to the menu button and tried to shuffle my songs but it didn't do anything/didn't play the song. My Ipod just showed that I have 50 songs on my shuffle songs. Then I checked the song cover flow, and it showed NO pictures of the song album (before this happened, when I check the cover flow my Ipod show the pictures of music/CD albums of a singer, but now it just blank!!). I already restart the computer, unplug the USB cable, restart my Ipod, re-sync my Ipod and still it doesn't work. I can't shuffle the songs, Ipod won't play the songs (though it shows that I have 50 songs on playlist), the song cover flow disappeared! I don't know what to do. Please help!! Thank you.

    Ok so do the songs play and show up ok in iTunes? Were you playing the iPod through a set of speakers and not connected to the computer?
    Have you tried performing a reset on the iPod yet? Or a restore on the iPod yet?
    Patrick

  • ITunes 7.7.1 won't play songs anymore.

    Hi, I recently upgraded to iTunes version 7.7.1, and since the upgrade, iTunes
    won't play songs anymore. If I select on a song in my library, the diamond stays
    at the 0:00 mark. I have tried re-installing iTunes, with no luck. I am running
    the software on a Mac Book Pro with the latest version of OS X (10.5.4).
    thank you.

    Just start with a standard procedure: Run Disk Utility and fix permissions/repair disk

  • My ipod won't play any music

    My ipod won't play music. I tried playing music with and without headphones and when my ipod is in the dock, but it said music was playing except there was no sound. Can anyone help?

    Do the headphones work in another device?
    Does the iPod play any sound?
    Try the following to rule out a software problem:
    - Reset . Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

Maybe you are looking for

  • Adobe cs6: extracting files, installer detects issues. Using Photoshop, the program crashes quickly.

    I'm in the process of downloading Adobe cs6, and when I extract the downloaded files, installer detects a machine restart is pending, but even after restarting the computer, and retrying to extract the files the issue persists. So I tried ignoring th

  • Changing the value of a control in a subvi

    I think the answer is out there somewhere but I've read through many threads found with searches similar to this topic so sorry to repost... I would like to change the value of a top-level VI control from a sub-vi.  The data is being used as a parame

  • Conversion problem in xml file

    Hi , I am updating the table reading an xml file. For the column whose datatype is raw, i read the value as string and convert to byte[] and update the database . I get an error value too large for the column. Is this because I'm converting the byte[

  • Fixing a query in Access

    I need help in a query.  In the criteria I am trying to get the query to find a string that is specified with each query.  I.e.  I want to search for part of a record.  Instead of [Enter Provider Name] and having the query match the provider name exa

  • Starting a process as a different user.

    I am trying to launch a script from my java application. My java application runs as root on my Solaris box. I'm using Runtime.getRuntime().exec() to launch the script. My problem is that I would like to run the script as a different user. So is ther