6233 Game Freezing, Problem Or Not?

I bought the 6233 yesterday, and the Snake game freezes every time I go on it. Is this a problem with the phone, or the game? Also, sometimes when I have been into contacts for example, it takes a while to fade from the screen once I have come off the contact list if you know what I mean.
Any help apreciated.

I have done the 5.10 firmware update, and it is still freezing so I have rang Nokia and they advised to return the phone as it is faulty, it shouldn't develop this after 2 days! (only got it Wednesday) So back to 02 I went and got a refund. Back to my trusty old 6230i now.

Similar Messages

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

The PyramidVille game in Facebook is not loading.I have no problems with the other games.I'm receiving the message" Forbidden 403" CSRF Verification failed.Request aborted. More information is available with Debug= True

The PyramidVille game in Facebook is not loading.I have no problems with the other games.I'm receiving the message" Forbidden 403" CSRF Verification failed.Request aborted. More information is available with Debug= True edit

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

HT204088 ا have Tried to buy points in the game and i could not ..... knowing I bought previously did not Tsadviny problem

i have Tried to buy points in the game and i could not ..... knowing I bought previously did not Tsadviny problem

What happens when you try ? If you are getting a message to contact iTunes support then you can do so via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why is it that when I play a game with a moving character, the game freezes up for a second when I move the character? This happens everytime I move them.

This freezing problem that I am having only happens when there is a moving character in the game. For example, when I hit the left arrow to move them left, the game, in a way, skips the action, and then jumps ahead to after the character has moved. I am not sure whether that would be freezing up or just skipping. I have updated all of my plugins, and I do not know what else to try.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

MBP running Leopard 10.5.3 and W XP with freezing problems

Hello everyone
Im running Leopard 10.5.3 and bootcamp 2.1 on my MBP. I am able to run xp pro only once in a blue moon. Ever since I started using bootcamp with windows xp sp2 the computer freezes up. I always have to reboot the computer in order to use the windows side of my mac. I dont know what the problem is. I decided to upgrade to version 10.5.3 and bootcamp 2.1 to see if the freezing problem goes away and it did not help.
95% of the times the computer freezes when Im using it, or when I start boot camp. I only use windows to play games and use some military software since Im a soldier in the army. Im currently deploy to Iraq and not very knowledge in computers. I have reinstalled the apple drivers with the leopard cd because the keyboard was not working properly and it worked fine for a few minutes and then it decided to crash again. It happens very regularly, sometimes Im playing a game for hours and hours and it work great, without problems. Im really lost here. I have read the post about this problem but they really gives me no solution to my problem.
Any suggestions will be appreciated.
Leo

I have 10.5.3 on an external, and a 410 that I use as a backup device. After reading this post I thought I'd check it for myself. Installed the 1.8.3-6BETA, and fired it up. Everything worked, I had inputs and outputs, even recorded a little something just to test. Started playing some itunes, and about 10 minutes in, the 410 dropped out. I've tried restarting the computer and device several times, and even though the 410 shows up in my sys prefs and Logic prefs, I can't get any ins or outs out of it, and the 410 interface shows now activity on any of the channels.
Bee Jay -
I'm going to try this tomorrow, but here's a thought.....the 1.8.3-8 says in the release notes that it has new firmware for the device. I know you're using the previous beta driver, but is it possible that if you installed the -8 driver and then downgraded to the -6BETA, that the device has retained the firmware from the -8 release, which is working with the previous BETA release and 10.5.3?
Dunno....just a thought. I was SO excited to finally get Leopard onto my internal, but now it looks like I'll have to wait a bit more. Bummer!

All 3d games freezes after few seconds of playing

Bah, the day is hot but is getting hotter inside my head cause of problems with the "pc from hell".
Ok this is the deal. My pc has been working fine for over a year then suddenly out of nowhere all my 3d games stopped working. I start the game and when the "3d card kicks" inn the game freezes and the pc reboots.
One question before I start : I’ve installed a “old” ide disk and I have read that it can be a problem on Nforce4 boards (sata) . But I’ve tried without the ide disk also.
To save you wasting the time writing good solutions which I already have tried i will summate what i have tried so far :
Partition and formatted the boot disk
Reinstalled windows xp sp 2
Installed newest nvidia drivers
Installed directx 9.0 c
Used Driverclean to unistall nvidia drivers
Installed 81.24 nivida drivers
Screamed load for a couple of seconds
Checked the ram (memram)
Tested directx with in windows mode(works fine)
Prayed
See config for more helllish details :
Windows xp sp2
AMD Athlon™ 64 Processor 3500+
Internal Clock 2.2 GHz
NVIDIA GeForce 6800 Series GPU Driver 9.1.3.1
DirectShow
Version 9.0c Long Version 4.09.00.0904
Sound Device 1/2
Creative USB Sound Blaster Audigy 2 NX
Sound Device 2/2
Creative SB Live! Series (WDM) Driver 5.1.2535.0
Total Physical Memory 1.00 GB
Total Pagefile Memory 2.40 GB
Manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Model MS-7100
Version 1.0
BIOS Vendor Phoenix Technologies, LTD
BIOS Version 6.00 PG
BIOS Release Date 04/10/2006
BIOS Properties Plug and Play, Flash
/oldgeezer

some more :
Error caused by a video device driver
Thank you for sending an error report to Microsoft.
Error report summary
Error type Windows stop error (A message appears on a blue screen with error code information)
Solution available? Yes
What does this error mean? You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.
Cause A video adapter device driver
Computer symptoms A message appears on a blue screen with error code information:
STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
- or -
STOP: 0x100000EA THREAD_STUCK_IN_DEVICE_DRIVER_M
Action for you to take
We have analyzed your error report and there are two solutions for this problem for you to choose between.
+ Solution 1: Install the most current driver for your video card
Go to the Microsoft Update website to see if there are any updated drivers for your video card. A driver is software that enables hardware or devices (such as a printer, mouse, or keyboard) to work with your computer. Every device needs a driver in order for it to work. If there are any drivers listed, you should install them.
If there are no updated drivers at Microsoft Update, and you know the manufacturer of the video card, contact the card manufacturer's product support service for assistance.
If there are no updated drivers at Microsoft Update, you don't know the name of the manufacturer of the video card, and you need more help diagnosing and resolving this problem, contact your computer manufacturer's product support service.
+ Solution 2: Manually decrease Hardware Acceleration for your video adapter
This procedure prevents the display driver from programming the hardware incorrectly, but you may lose some display functionality and performance. Although you can increase the hardware acceleration settings higher than None to regain functionality and performance, these settings increase the chance that the issue will occur again. For maximum stability, leave hardware acceleration turned off.
Click Start, click Control Panel, and then double-click Display.
Click the Settings tab, and then click Advanced.
Click the Troubleshoot tab, move the Hardware Acceleration slider to None, and then clear the Enable Write Combining check box.
Click OK, and then click OK.
Note: This procedure prevents the display driver from programming the hardware incorrectly, but you may lose some display functionality and performance. Although you can increase the hardware acceleration settings higher than None to regain functionality and performance, these settings increase the chance that the issue will occur again. For maximum stability, leave hardware acceleration off.
Article ID : 11
Last Review : February 28, 2006
Revision : 1.0
Additional Technical Information
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)

Screen freezing problem!

when i star to play a game (it is not happen evrytime) the screen is freezs and also the system is locked ! couse i have no restart button i have to shut down the system by turniing the psu button off! then when i restart the system ,just before loading windows , one the screen there is lots of colors ! whats that? why the system is locked while i play game? is it memory or video memory problem? my old cpu was p4 2.4 (533 fsb) and also there was the same problem! so i dont think it is a psu power problem!
HELP!

as i said before because the same problem occured with my old cpu which was P4 2.4 i dont think this is the psu faulty!
i runned memtest86 for twice in first running there was 7 pass and 1 error(which occured after 3th pass)! and in seccond running there was no errorr, 8 passes?
i have trouble with driv3r , kotor ;
also i want to add that which is interesting the problem is not occures evrytime ! sometimes there is no freezing or locking when i play the same games ! and also i can play SW galaxies and underground2 with no problem !

DPC Latency very high in Games sound and game freezes

5DPC Latency very high in Games sound and game freezes?hello, i am new her. I am german, sry for my Bad englisch. i do my best that you unterstand me...
my problem is very well known in the internet, but i did not find a solution until now...
My Computer:
E6300 @ 3 ghz
Mainboard: Abit Fatalty FP-IN9 with nForce650i-SLI Chipset
4 Gig DDR2 Ram
Win 7 64bit
Soundblaster is a X-fi Titanium PCIe
when i am in windows, look a film on youtube or on my harddisk the DPC Latency is always " green " and i have no freezes in sound or computer
But when i start a Computergame like Starcraft the freezes come, and also the DPC Latency goes red.
http://www.picfront.org/d/7Ngg
I thought the problem is the old Daniel_K 2.0 support pack driver which i installed 6 month ago. I formated my computer todey.
Installed Windows, installed Ati display driver, than installed orginal Creative driver : 2.7.0008 (26. Juli 200). And then i started Starcraft 2 direct but i did not help. Because of that i think i must be a hardware problem...
cya

the Wlan-card was it. How can i solve the problem that i can use my wlan without this freeze problems ?

My games freeze

When i play games like SOF2, NOLF, GTA3, UT2003 the game freeze. I have a geforce 4 TI 4200 128Mb, AMD Athlon 800Mhz, 384SDRAM and i run with the officiel drivers of Nvidia(40.72). The 30.82 freeze the game also.
Help me?!?!

I am getting similar problems m8 although I wouldnt say it's on any game BUT UT2003 and it's usually wen i go online. The game crashes very rarely against bot opponents but will almost certainly freeze after abt 5 minutes online :-( Have no idea wot is causing it. My old GF2 Ultra 64MB DDR didnt have any problems but I recently put an MSI GF4 Ti4200 128mb ddr in there. I also have an MSI board and wish to ask, quite simply, is what temperature's are dangerous wen running 512MB DDR PC2100 and an XP 1800 (not o/c). My machine boots at abt 40 and i have a Zalman Flower cooler, i thought it would be MUCH lower than this! Wld anyone suggest adding more coolant, dont think I put that much on initially.
Anyway hope u sort ur gfx card problem out m8, I am dual booting with Win98 so am gona try it in there with the 30.82 and the 40.72 drivers.
Cya

NGTX570 Twin Frozr iii Power Edition/OC freezing problem

Hello,
I have problem with my card. In some games at total random time my screen freeze and I get some little white "bolts" all over my screen, display driver stop working and i must do ctrl+alt+del to exit that process or sometimes i cannot do anything and i must restart PC on button. Look at picture which are posted and u will see whats happen. I have installed latest drivers, but i still have that problem.
I never clocked graphic card, its on default settings.
I bought this card 27.12.2011 and have this problem from the start.
My config is:
CPU AMD Phenom 2 X4 965
Motherboard M4A87TD
NGTX570 Twin Frozr iii Power Edition/OC
Kingston DDR3 12GB
Chieftec 650W
Regards,
Veljko

I didn't pay attention because it doesn't often happen. I still have guarantee - for 2 years, but the problem is that if i send my card back they will check the card and the problem may not happen and they will send me my card back. I have mentioned before that the problem occurs at random time.
One thing more, when I test the card in hard tests like Furmark and Kombustor that problem never happens. It occurs in video games which are not very demanding. I would ask you if it is usual that the temperature is always over 70 degrees in every game (even over 80 when playing new demanding games). I ask you that because i have read on various forums that the temperature doesn't increases that much.
Thanks

Freeze Problem (EAX and MI

Hello everyone. I have had my SoundBlaster Audigy 2 for almost a year now and it has always had this problem. I will be in the middle of an EAX game or playing back a MIDI file and the entire system locks up completely with a high pitched squeel continuously emanating from my speakers.
My system:
Intel P3 900 Mhz
Audigy 2
52 MB RAM
G-Force 3 Ti 200
This is very important for me to fix now that I am starting to focus on MIDI some more with my music recording.
I read in a few other threads where other people have had this problem. I haven't tried any of these suggestions just yet, but switching the PCI slot and updating the MoBo BIOS were ineffecti've for them. I am willing to try this though if anyone thinks it will actually help. I'll have a problem updating my BIOS though because I don't exactly know what my MoBo is and I have a Dell proprietary Intel processor.
Thanks for any help.

I have this exact same problem when I play certain computer games. Exact freezing/screeching noises every few minutes followed by me having to cold reboot the PC...
Anyway, long story short, I've concluded the the culprit is most likely Creative's crummy drivers and EAX. When I disable EAX (i.e. use Software 3D audio, etc) the freezing problem is completely resolved.
Regardless, I'd like this problem fixed by Creative with some new drivers, I supposed. I have the Audigy Gamer sound card, and there has not been a driver update since November 2002. Yes, the problem is solved by not using EAX, but then why did I buy an EAX-capable card again?
A few facts (or at least reasonably true according to my observations over the past year):
-This freezing/high pitched sound looping only happens in games or programs with EAX/hardware 3-D audio enabled
-With EAX disabled (i.e. just using software sound or regular 3-D stereo) from the game or program options, the freezing is nonexistant.
-With EAX enabled, I get the sound looping/freeze with many different video drivers and motherboard BIOS versions, Windows SP and SP2, all patches, newest drivers, cleanly reinstalled system, etc. - the fact is that EAX and Creative's drivers are to blame here.
My current specs for comparison's sake:
Windows XP Pro with SP2
Intel Pentium 4 2.8GHzGB DDR400 RAMAbit IC-7 mobo60 GB SATA, 60 GB IDE, 20 GB SATASoundblaster Audigy GamerRadeon 9800 PRO (latest Catalyst drivers)
Creative, what's the deal? Gi've us XP drivers that aren't buggy.
Message Edited by slicknick986 on <SPAN class=date_text>-27-2004 <SPAN class=time_text>07:30 PM
Message Edited by slicknick986 on -27-2004 07:3 PM

Blackberry Tour Youtube problem/facebook and phone freezing problem

ok any time i go on youtube to watch a video it never works i always get this error thing that says:
in the top right corner it says Error Playing in red
and then a box opens and says "An error has occered attempting to play media." and then all i can click is Ok
and this has only been since i installed the buzzmetin app and then removed it cause it was just pissing me off
also i docked my phone with my pc to add some music to the media card thats about it.
and now for some reason i cant view youtube videos.
normal videos saved on my media card work fine just youtube from what ive tried.
and then the other problem is with facebook
ever since i connected to my pc and got that app its adding all the pictures of my facebook firends to when they call me. I DONT WANT THIS
and i already went through all the settings and checked them not to show but for some reason it still does?
and also when ever i go to my friends list through the facebook app it starts freezing like mad even though its already loaded.
so anyone have any advice i can use to fix these two problems? mainly the youtube one
the facebook problem is just bothering me but i just use the mobile browser app to get to facebook now for the time being.
ive had my phone for about a month now.
with bell service.
can anyone help?
OH and just on a side note incase anyone can help its pretty simple
is there any way to change the blue tooth access password for my phone?
mine is by default 0000 and i wanted to change it to something different so people cant just access my phone when i have the blue tooth on

YOUTUBE has not release an app for Blackberry Tour yet. The only option you have is to download an app called Vision (http://vision.metova.com/download) I do have BuzzMe app and still watch videos on my phone. Hope that helps! As for your freezing problem, make sure whatever app you open..ie, internet, games, google maps....make sure you close it fully. One way to make sure your BB is as fresh when you wake up in the morning, download an app called Quickpull Lite. Good luck...

Satellite A300-20P - Games with Windows 7 not working in full screen

I have Satellite A300-20P and VGA ATI 3650
I made upgrade to Windows 7 Professional
All games working well but not in full screen. I installed the last driver for ATI for Windows 7. It was working in full screen in Vista before I make upgrade.
Same problem on my brother`s laptop after he make upgrade to Windows 7.

Hi
Normally you can change the screen resolution in every game and if they should run in full screen mode or not. Check this!!!
Can you also tell us what display driver you have installed? The drivers from the Toshiba page are for desktop cards and not for mobile cards. So please use only the Toshiba drivers.

I know how to fix the iTunes 7 / firmware ver. 1.2 freeze problem

Many of you (like me) are having major headaches because of the new updates that Apple has been releasing (i.e. iTunes 7). So far I only know that this affects the Video iPod, but this could very well fix other models too.
Here are some symptoms of what the following will fix, and what you most likely have already done to try and fix it.
- iPod keeps freezing after a few seconds ever since you updated to iTunes 7 and/or iPod software ver. 1.2.
- iPod will remain in Do Not Disconnect mode even after ejecting or disconnecting
- A forced reset does not fix it, as it repeats the above.
- Restoring the iPod through iTunes does not help
So, here's what to do.
The old iPod updater software is how you will fix all of this. Unfortunately, because iTunes 7 thinks that it's better and more up to date, it will prevent you from opening the old version of the software if you still have it on your machine.
So first of all, uninstall iTunes 7.0. (You do not have to remove your library information, just the software.) Restart the computer.
If you still have the old iPod updater, try it and see if it runs. If it does, read on. If not, skip to the next paragraph. So, if it does run, simply hit Restore and you can go back to a previous version of the firmware. I believe that Apple discontinued the firmware page since releasing iTunes 7. Look around some search engines like Google if you really want the latest firmware.
Take out the installation CD that came with your iPod. Run it and it should install the old iPod updater along with iTunes 6.x. iTunes 6.x cannot run since iTunes 7 changed your libary's formatting, but that will not be a problem. Run the Restore process in the old updater and it should be alright for you to start loading your stuff on again without problems.
Since iTunes 7 reformatted your libary listing, iTunes 6 will no longer work. However, you can still use it by reinstalling iTunes 7. Just make sure you do the following.
TO KEEP THE SAME THING FROM HAPPENING AGAIN
iTunes 7 is actually alright. It's the updater part of it that will screw up your iPod.
- iTunes 7 will tell you that a new iPod software version is available when you open it.
- Check the "Never Ask Again" box and click Don't Install.
- When you sync your iPod to your computer, NEVER touch the Version section when you're changing your iPod's settings. Everything else is alright to work with.
- Everything will work fine as long as you never update the iPod's software via iTunes, at least until the programmers can fix this issue in a later release or patch.
I hope this helps out a lot of you. Pretty lame of Apple to miss something this big during debugging.
Custom Windows XP

Listen to this person, he knows exactly what he's talking about. My unit had the freezing problem, the visual artifact problem, and eventually would only show a blank white screen after I had tinkered too long. Luckily I have another computer that I hadn't yet upgraded to itunes 7 and it had the last firmware upgrade before the itunes 7 one. From disk mode I was able to restore it to the previous firmware version, and now the ipod works perfectly.
I too am almost disqusted with Apple for 1) missing this problem and 2) not letting people know!
I wonder how many more people are going to have lots of problems so apple can protect their PR.
Anyways, what would be really helpful would be if someone could upgrade the latest firmware installer before itunes 7 (it's an individual ipod updating program, not itunes 6.xx)somewhere on the internet so users could download it and do away with this evil 1.2 firmware.

6233 Game Freezing, Problem Or Not?

Similar Messages

Maybe you are looking for