6280 call handling and other problems

Hello. I have got some problems on my new Nokia 6280.:
1. Device sometimes reloads spontaneously.
2. In case of incoming call if a call waiting is activating sound reroutes for a few seconds to louspeaker and than it goes back. It breaks my confidentiality. I can handle one call and when the second call is coming everybody can hear everything the subcriber on the other side speaking. Can you explain?
3. The speakerphone (usual, not loudspeaker) is trembling when someone's speak on the other side.
4.When a make a call and I am waiting for the answer from B side a can hear some backgroung peep.
My firmware version is 3.6
Can these problems be eliminated?
Thanks in advance.

Hi Kilch,
You might want to take your phone into a Nokia Authorised Service Point, the engineer there will be able to take a look at your phone and advise you on the best course of action.
You can find the nearest to you on the Repair page.
Cheers
Karim

Similar Messages

Audio (and other) problems noted with Keynote version 4.0.1

Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.

Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
So here is my correspondence with Tech Support. I've removed names except mine.
I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
Hi (support),
That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
It is not a hardware issue.
I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
A version 4 product should work as advertised. Keynote certainly does not.
I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
Hello Sir,
Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
At this point, there isn't much else we can do in the way of troubleshooting.
If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
Hi (support),
Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
Here are the tests I mentioned.
These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
Test 2 is the same file, but with audio modifications applied to each slide in succession.
This demonstrates a dramatic synchronization slippage.
The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
<TuckerKeynoteTest.zip>
Message was edited by: Ron Tucker1

How to share on CC with Team members and other problems

I had a CC for Team account, then got a deal to add seats at a discount, I added 2 more. I had to change my password and give a new e-mail address to get this deal. When I log in using my New ID all my files are gone. I log in with my Old ID my files and web sites are there no team members, added my OldID to the new Teams account and made me an administrator. Now when I log in with my OldID I can see my file and team members one of them is me with a new ID and the other is a client. I want to get rid of one of me I prefer the new one but I can't I can only delete the OldID and I lose my web site and all my files. Now the only reason I did this was to let my client see the files instead of selecting one page at a time and sending a link I thought they could go to their folder and look at the pages as they are being designed and edited. But there is no method to share with other team members. I re-watch the Max video but nothing they were showing is available in my team CC account. Can someone Help me out Please?

New: Creative Cloud for teams. Join now | Read online
We hope your team is enjoying their Creative Cloud for teams membership. From now through June 28, you can add more seats for only US$39.99/month per seat — for up to 24 months.
Your Adobe® Creative Cloud™ for teams membership will have some amazing new things to offer. Brand-new creative apps, like Adobe Photoshop® CC, Illustrator® CC, and 13 other favorites — with hundreds of new features that help everyone create their greatest work. Plus, 100GB of storage for each team member. And now, a lower price for both new and existing seats.
Keep everyone on the same page, working on the latest versions of the same apps, and sharing files from any device.
You've made the right choice. New creative software innovation will be delivered exclusively to Creative Cloud members. Add more seats of Creative Cloud for teams today.
Special offer.
Add new seats before
June 28, 2013, for just US$39.99/month per seat — AND get a first annual renewal price of US$39.99/month per seat.
Learn more ›
Share with your friends
* VOID WHERE PROHIBITED OR RESTRICTED BY LAW. If you own Creative Suite through an Adobe volume licensing program, save US$30.00 per seat when you enroll in the Adobe Value Incentive Plan (VIP) and purchase Creative Cloud for teams annual plan membership (12-month contract required) before 11:59 pm on June 28, 2013. Creative Cloud for teams regular price: US$69.99. Offer(s) available only to eligible Creative Suite subscribers (CS3 or later) who enroll in the Adobe Value Incentive Plan (VIP) and who purchase Creative Cloud for teams through authorized Adobe corporate resellers. Offer discounts are only valid for up to two years. Offer discounts may not be applied retroactively. Additional terms and conditions may apply. Residents or persons in embargoed countries or countries subject to U.S. or local export restrictions are not eligible. All prices quoted are estimated street prices only. Offer and prices are subject to change without notice and exclude shipping, handling and any applicable sales tax. Offer may not be assigned, exchanged, sold, transferred, or combined with any other discount or offer, or redeemed for cash or other goods and services. Adobe, the Adobe logo, Acrobat, Creative Cloud, the Creative Cloud logo, Creative Suite, Illustrator, and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. © 2013 Adobe Systems Incorporated. All rights reserved. To ensure future delivery of email, please add [email protected] to your address book, contacts or safe sender list. PLEASE DO NOT REPLY TO THIS MESSAGE. To obtain information on how to contact Adobe, visit the web at:www.adobe.com/misc/comments.html, or call 800-833-6687. This is a marketing email from Adobe Systems Incorporated, 345 Park Avenue, San Jose, CA 95110 USA.
Click here to unsubscribe. Your privacy is important to us. Please review Adobe's Privacy Policy.
Too many newsletters? You can unsubscribe or better yet, schedule automatic cleanup.

Start-up / shut-down (and other) problems with ZFS over iSCSI

Hi,
I've had a limited time in which to try some concepts on an evaluation x4500 server. This is unfortunately my last day, so by the time anyone can reply I will probably not be able to to further tests, but maybe someone will be able to reproduce the issues.
I'm using the evaluation server to export some iSCSI targets, and I'm connecting to them from my laptop, which has a fresh installation of SXDE 01/08. I was able to attach to the targets with
iscsiadm add static-config \
iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8,192.168.15.62
iscsiadm add static-config \
iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865-baef90fb71ce,192.168.15.62
iscsiadm add static-config \
iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23,192.168.15.62
iscsiadm modify discovery -s enableThis made the appropriate entries appear in /dev/dsk so I could then set up a simple zpool and zfs filesystem with:
zpool create -m none dPool c3t010000144FA70C1400002A0047C2BF73d0 \
c3t010000144FA70C1400002A0047C2BF81d0 c3t010000144FA70C1400002A0047C2BF8Bd0
zfs create -o mountpoint=/data -o sharenfs=on dPool/dataThe general concept I'm testing is having a ZFS-based server using an IP SAN as a growable source of storage, and making the data available to clients over NFS/CIFS or other services. In principle this solution should also allow failover to another server, since all the ZFS data and metadata is in the IP SAN, not on the server. Although not done in this example it should also be possible to run raidz across multiple iSCSI disk arrays. However, it's not been a bed of roses. I've had a lot of errors in dmesg like the following, which I think are causing zfs/zpool commands to stall at times:
Feb 28 14:30:39 F4060 iscsi: [ID 866572 kern.warning] WARNING: iscsi connection(ffffff014f6b6b78) protocol error - received an unsupported opcode:0x41
Feb 28 14:30:41 F4060 iscsi: [ID 158826 kern.warning] WARNING: iscsi connection(10) login failed - failed to receive login response
Feb 28 14:30:41 F4060 scsi_vhci: [ID 734749 kern.warning] WARNING: vhci_scsi_reset 0x1
Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e-afe60e13db23
Feb 28 14:30:41 F4060 iscsi: [ID 339442 kern.notice] NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBUF or SO_SNDBUF
Feb 28 14:30:41 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-943d8861c9e8Does anyone know why a Solaris iSCSI target would send an unsupported opcode (0x41) to a Solaris iSCSI initiator? Surely they should be talking the same language!
The main problems however are with shutdown and start-up. On occasions, I suspect that the ordering of ZFS, iSCSI and network services gets a bit out of sync. On one occasion the laptop even refused to complete the shutdown because it was reporting a continuous stream of console messages like
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(13) unable to connect to target iqn.1986-03.com.sun:02:ee74d5de-3046-6295-f35e
-afe60e13db23
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(10) unable to connect to target iqn.1986-03.com.sun:02:371c6fe7-f0c8-e02c-c865
-baef90fb71ce
Feb 27 18:26:37 F4060 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(7) unable to connect to target iqn.1986-03.com.sun:02:f4281081-c3fc-e448-c8f0-
943d8861c9e8I also get these on start-up, where it looks like ZFS tries to load the zpool configuration before iSCSI has found the disks, and even worse, iSCSI is starting up before nwamd has time to do its network auto-magic, and complains that the devices are unavailable.
If these problems sorted themselves out after everything came up, I wouldn't really mind some temporary complaints in the log file, but what I get after a reboot is a working zpool but an unmounted ZFS filesystem! Here is what I have today:
bash-3.2# zpool status
pool: dPool
state: ONLINE
scrub: scrub completed with 0 errors on Thu Feb 28 14:33:43 2008
config:
        NAME                                     STATE     READ WRITE CKSUM
        dPool                                    ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF73d0 ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF81d0 ONLINE       0     0     0
          c3t010000144FA70C1400002A0047C2BF8Bd0 ONLINE       0     0     0
errors: No known data errors
bash-3.2# zfs list
NAME         USED AVAIL REFER MOUNTPOINT
dPool        480M 28.9G     1K none
dPool/data   480M 28.9G   480M /dataThis all looks fine, and you can see that I was even able to scrub the pool data with no problems. But where are the 480MB of data I have put in the /data mountpoint:
bash-3.2# ls /data
bash-3.2# df -h /data
Filesystem             size   used avail capacity Mounted on
/dev/dsk/c1d0s0         15G   4.4G    11G    30%    /As you can see, /data is unmounted, causing df to revert to the / filesystem containing the empty /data mountpoint, instead of showing the zpool mount.
Since zfs is supposed to take care of its own mounts rather than using vfstab, I can't use "mount /data" to force this to mount. The only workaround I've found is to export and import the zpool. Then I get the filesystem to reappear:
bash-3.2# df -h /data
Filesystem             size   used avail capacity Mounted on
dPool/data              29G   480M    29G     2%    /dataDoes anyone know if these are known issues with snv_79b, and is there a fix available or in the works?
TIA,
Graham

EasyE, Welcome to the discussion area!
(a) Call Apple and get your iMac G5 fixed since it is in the repair extension group. Don't waste your time doing anything else.
(b) This area is for discussing the iMac G4. Since you have an iMac G5 in the future you should post in the iMac G5 discussion area.

Problems with stuck/dead pixels, battery life, ICS, and other problems

Stuck/Dead Pixels:
I bought my Droid Razr at around the 21st of December last year. On or around Christmas, I found a bright red pixel on the very bottom of my screen. Unlucky for me, I was leaving for Florida on Christmas Night. I got back on December 31st. Sometime in the first week of this year, I visited my verizon store and told the customer service lady that I had a dead pixel on my screen and had just bought it. But, she told me that she needed the manager to fix this and there was no manager there. For the next week I was busy with school and sports etc and was not able to go back to the store. It was now past my 14 day return period. So I decided, its only one pixel, most people won't notice it anyway. So here I am 5 months later, just starting to discover more pixels dying on my screen. I now have the one bright red one, two light blue ones, and one dark red. I have no idea what the return policy is on defective phones, and the verizon site is designed so that you can't find anything. And an FYI, I have tried stuck pixel removers and other apps, which haven't been successful.
Battery Life:
I have also been finding more problems with my phone. The battery life is terrible when 4G and even 3G are on. I actually see no difference in battery consumption between 3G/4G. My battery dies about 4-5X faster when data is turned on, compared to using no data. I know it isn't because of the apps I installed since when I use WiFi, the battery is alright. I also make sure that my RAM isn't above 400MB, so that the processor doesn't use a lot of battery. I feel like I completely wasted my money buying the Razr. Mainly because of the fact that the Razr Maxx was announced two weeks later, which has about 80% more battery. Not only this, but I've seen the Razr selling for only ONE PENNY on amazon over the past month and it still is. I payed $300 on my Razr.
Ice Cream Sandwich:
After these major problems comes another one, that I bet all Razr and Razr Maxx customers are still thinking about. When will I get Ice Cream Sandwich? It is very disappointing when you are told that you will be getting an upgrade in early 2012, and are still wondering where your upgrade is 5 full months in. From what I understand, we won't see an upgrade until the end of June, since Motorola has posted on their website that "rollouts" would begin in the second quarter. Even if they release it by the end of June, when will it get to your phone? Maybe another week or two for some people. This is another thing that I feel I wasted my money on. My brother told me to get the Nexus because of ICS, but I trusted Motorola that they would upgrade my phone in a timely manner. WRONG.
Phone Freezing:
One more problem that I've had is that the phone will freeze. Usually you only need to turn the screen off and on, but once in a while, you have to completely reboot your phone. When I was coming back from Florida, right as I was about to get home, my phone completely froze. I was about to go return it, but after about 15-20 minutes, it became unfrozen.
Motion Sensor not functioning:
Another problem, an annoying one, is that sometimes the motion sensor that controls portrait and landscape mode will just stop working. Some of the games I play are completely dependent on the motion sensor. It is very embarrassing when you are trying to show off to an iPhone friend and major components of your phone aren't working. They always tell me "why didn't you get an iPhone?". And I really just wanted to have a phone that didn't look like everyone else's, but I guess that comes at a cost. When the motion sensor stops working, I have to shut down my phone and restart, which takes a couple minutes.
Problems with camera:
My last problem would be with the camera. Sometimes if you bring the camera close to something, like a barcode, it will keep trying to focus, but never will. Another problem is photo quality in low light situations. It seems like the camera can't focus because it goes from being very dark into being bright because of the flash. I doubt this can be fixed because it's hardware, but a potential fix could be having the option to keep the LED light on during picture mode, that way the camera will be able to focus correctly.
In Conclusion:
I really just want someone to tell me how to return my phone for a new one, due to the dead pixels. I also wish I could be upgraded to the Razr Maxx because of the poor battery life on the Razr, but from what other people are saying, that probably won't happen. And finally, if anyone has more info about Ice Cream Sandwich, that would be awesome.

Well since it's a Manufacturing Error it should Fall under your Warranty if you got one with your Razr. You know you can Call C.S. an they can Assist you with the Matter on it.. Just remember to have another phone so they can Trouble shoot the One that is Experiencing the Issue an when you talk to them go over thing. An they should send you C.G.A.N unless they request you to send it in before you get anther one. If you feel Better going to the Store try that. And Good Luck..

Lost all photos and other problems followed after upgrade to iphoto 6

All of my photos disappeared while creating a calendar in iphoto 6. I was finally able to find them in the trash can???? After loading them back into my library the photos have shrunk. I shoot with an 8 megapixel camera, and now I can't enlarge at all. How can I recreate my original library. Very frustrated with latest release.
Any suggestions?
Bill

The new structure organizes photos into Originals and Modified folders. There is a third folder called Data that contains thumbnails created for the photos (smaller pictures used for better performance). These three are essential for iPhoto 6 to work.
Each folder contains a folder for each year (a year folder is created if you have even one photo from that year, e.g. a photo from 4/3/2004 will create a folder called "2004" and any other photos from that year will then be placed within it.
Every import creates a serially numbered Roll folder within the year folder. So if you import photos including IMG_234.jpg from 4/3/2004, for example, the location of IMG_234.jpg will be:
iPhoto Library/Originals/2004/Roll 1/IMG_234.jpg
And Roll 1 will have other photos imported in the same session. If you modify the photo within iPhoto (enhance, retouch, etc), the modified copy will exist in:
iPhoto Library/Modified/2004/Roll 1/IMG_234.jpg
The Data folder will contain a thumbnail for the image in the same path as the Originals:
iPhoto Library/Data/2004/Roll 1/IMG_234.jpg
So inside the iPhoto Library folder, you will see some files and those three folders with their sub-structure folders. Other things within the top level of the iPhoto Library folder, are leftovers from the previous structure - such as a folder called "2004" or "2005" that ISN'T inside Originals, Data, or Modified folders.
PhillyPhan's advice is sage. Don't mess with the insides of the iPhoto Library. However, I did verify on my own system after I upgraded, that year folders at the top level of the iPhoto Library are from previous versions of iPhoto. So you could move those, and those only, to a separate folder on your HD. I moved those off to a DVD-ROM and haven't seen problems since.
Remember: Don't touch any files, and don't touch anything within Data, Originals, and Modified folders.

QT 7.1.6 freezing and other problems

Hello everybody,
I continue to see postings relating to QT freezing while audio still plays and various work arounds people have come up with.
Please remember to call Apple and report the problem. The more people that call and get a case number (yes, that is important) the more Apple will become aware of how widespread the problem is.
While Apple hosts these discussion forums it does not necessarily mean they are aware of the problems we are having and discussing.
I wrote down all the troubleshooting I did so I did not forget anything when I called Apple and reported my problem with iMovie after updating my system and QT. I was immediately given a case number and have been in contact with product specialists. Initally they thought it was the Security Patch but I quickly zeroed in on QT 7.1.6 as my problem. I finally did an Archive and Install and updated all software except Security Patch 2007-004 v1.1 and QuickTime 7.1.6. I downloaded and installed QuickTime 7.1.5. My system is functioning very well now.
Sue
iMac G5 20 inch Mac OS X (10.4.9)

It might not be widespread and I never said it represented a majority of people but there is enough chatter to indicate a problem more widespread than just me.
I just wanted to alert people that the best way to inform Apple of a problem is to call them and get a case number. When I worked for education my SE always reminded me to call Apple and not just report a problem to him.
Just because you had no problem doesn't mean that everyone else who has a problem did not install correctly. I worked with Apple to zero into the QT 7.1.6 upgrade. I would never have seen the problem except I decided to do an iMovie project and that showed up the video freeze.
Sue

Power Manager features and other problems associated with the T510

For the better part of 5 years I've been a happy user of a IBM Z60m and decided it was time to pass my z60 off to my son and buy a new T510. Well I after several weeks of ownership I can honestly say I'm irritated and frustrated by several ongoing issues and am ready to send the whole unit back.
From the time I pulled it out of the box I'm been having power management issues. I've been on Microsoft's help forums, called lenovo support, and spent countless hours on blogs and forums looking for assistance. No matter what I do in the lenovo power setting arrangements my computer aways goes in stanby after a minute of nonuse and then asks me for my windows password. So after an entire day of inserting my password my frustration level is off the chart. I removed the password in the user settings that didn't help. I changed the global settings to turn off password in stanby mode that didn't help. I've changed the power choice feature to optimize and others but none of that helped.
Beyond those problems... I inserting two different disks to insert new programs and my system kept telling me it couldn't read either. I first thought they were scratch but my old ibm laptop read each without a problem.
So there you have it.
Solved!
Go to Solution.

Are you sure the system is going into standby after 1 minute? Or is the screen being locked?
Try this:
1. right-click on desktop and choose "personalize"
2. click on "screen saver" in the lower right corner
3. uncheck the box that says "On resume, display logon screen"
Does that fix your issue?

Oracle 8.1.5 install on Linux Redhat 6.0: character set (and other) problem(s)

I am trying to install Oracle 8i on Linux and it does not work : once the install is finished, I have a message saying that "Character Set not found".
I am runing a french version of Linux (fr-latin 1) and I try to install Oracle with French and English as languages
An other problem about this install : Oracle does not seem to recognize that I have 6,9 Giga for it to install, and says that I have not enough space for the install...
And at the end of the install, it takes for ages (about 15mns) during which nothing seems to happen. On one machine I got out of this phase, but on the other I never saw it finish, it looks as if the computer crashed. Is that normal?
I went through all the initialization phases, set the correct environment variables...
thanks
Solange
null

I've been dealing with the same problems in the english version but could bypass thiss by doing the folowing.
-Just ignore the disk space stuff
-Ignore the charset message, also
-When creating a database, choose custom and then select the WE8ISO8859P1 char set. It worked for portuguese, must work for french also.
-Everyone here recommended, and I do the same, leave the database creation for later, not during instalation.
Good Luck!

Crashes, sound loss, and other problems

Hello,
I have been having some serious problems over the past several months. In the past it was fairly manageable, but recently things have been getting worse.
I have a 12-inch PowerBook G4, I bought it at the McGill bookstore in October 2004. The first problem was the apparently random crashes that Mac OS X (v.10.4.8) would experience from time to time. It was fairly infrequent at first so it didn't bother me too much (and I thought it was just some sort of glitch). But it persisted and came to be expected.
What would happen is that my screen would darken and center box would appear telling me, "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button." (it would display this message in English, French, German, and Japanese for my convenience). After I restart the computer I get the message, "The computer was restarted after Mac OS X quit unexpectedly". At first it seemed to be linked to time; after a while it would just crash, sometimes after an hour or so, sometimes after as little as five minutes. (I fear as I write this that I will have to start over). More recently I've come to associate the crashes with movement of the computer; perhaps the battery (which is pretty much dead after so much use) is affecting the performance, I don't know.
The next problem, which coincided with the crashes, was my clock being reset. I assumed this was directly associated with the spontaneous shutdown of the computer, yet though the crashes continued, the clock was not always reset (just about a third of the time). This was a pretty frustrating inconvenience given the frequency of the crashes at the beginning.
The major problem that prompted me to take action was the lose of sound. One day, about a month ago now, my sound suddenly stopped working. At first I thought it was a hardware problem, but then I noticed the sound was still working with some things and just not others. For example, the sound increase/decrease indicator (the 'pop' sound when turning up or down the sound) stopped working, yet the startup sound still worked. I've found that Realplayer, MPlayer X 2, and Windows Media Player work fine but iTunes, VLC, and Quicktime don't. Most of the applications simply don't make sound but when I try to video in VLC I get the following error: "auhal: we cannot find our HAL component" or "auhal: audio-device var does not exist. device probe failed."
Other minor errors I have come across include inability to detect the Airport card (remedied upon restarting the computer) and occasional seizing up of the keyboard (the letter keys, exclusively, were unresponsive for sometime before working again suddenly without need of restart).
I've run diagnostic tools such as Disk Utility and the 'fsck' command in single-user mode, but nothing has been detected. It consistently comes up saying that everything is alright.
I have backed-up all important files and programs (with the exception of my Firefox bookmarks, do you know how I can save those?) and am prepared to do whatever it takes to bring my computer back to working order. I need my computer for schoolwork and assignments so if I can fix it myself in anyway... I would prefer to avoid lengthly repairs if possible.
Please let me know what my options are, and/or possible things I can do to repair these problems. This whole affair is, unsurprisingly, driving me crazy.
One last thing, upon launching Microsoft Word, I get the following pop-up:
Application Launch Failure
The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><Microsoft Word><MicrosoftLSLibZ>"
I do not know whether this is linked to my other problems or not. This too, is something that has recently come up and is significantly affecting my work (I have had to switch to writing my essays on TextEdit).
Any help is greatly appreciated.
Thank you,
Eric Oosenbrug
PowerBook G4 Mac OS X (10.4.8)

try shutting down, remove the battery, carefully pull out AirPort card and reinstall it.
maybe run hardware test included with CD kit

Ios 5.0.1 crashing, slow and other problems

I am using an iPhone 4 running 5.0.1 and Im just fed up with it, as much as I loved the iPhone in the past Im afraid I have fallen out of love and I'm conteplating a breakup.
Problems I have had with the version 5.*.* update:
* Safari and the built in youtube app crash at least twice daily and other apps, most notably accuweather and Facebook also crash on a daily basis
* Pages/windows don't load properly, an example of this is the texting app, I open the app and select a converstation, the "messages" button, name and "edit" buttons apear at the top but the area that would disply the text conversation never changes to show the accutual text messages and only pressing the home button and reentering the messages app will fix this.
* I have had text messages compleatly disapear if I recive one while acitivly using the phone, mostly by pressing the home button or preforming other input at the same exact time I recive a text message. I get the popup notification dispalying the text of the message in the notifaction but when I go to reply to the message It is gone, like it never existed.
* Simply navagating the phone such as menus, back buttons, or loading apps is slow. I can out type the keyboard and in general the phone is becoming more and more usless. As an example, wakeing the phone with the home button takes upto a full two seconds for the unlock screen to open, then another full second for the phone to "think" before it unlocks. This is increadibly slow compaired to the previous versions, and much slower than my old iPhone 1 and my non-updated iPhone 3Gs
* I use to have a problem where the purple arrow indicated the phone was using location services about 50% of the time and it was the setting time zone feature. I disabled location services for this feature and it fixed the problem. I did not notice an abnormal battery drain with this problem.
* The keyboard will not hide and/or display at approprate times requireing me to restart the app.
* Notication sounds, mostly incoming SMS sounds dont play at approprate times or play twice a few seconds apart for the same incoming message
* Autocorrect is too easily learning misspelled words leading me to reset the keyboard dictionary too frequently
* Incoming email and SMS messages cause the phone to loudly vibrate while talking on the phone, this is a new problem with ios5. I use to be proud of the iphone for not doing this becasue I talk to people with androids and found the vibration noise very annoying while on the receving end.
My phone is rather clean and I have very few third party apps installed. I use the facebook app, a weather app, and only a few other apps. My storage memory is about half full and thats almost entirly music.
I regualry power cycle and restart my phone, I would say at least once a day.
I have tried to fix the phone by disableing and enableing anything I can find from notifications, location services and icloud and nothing has helped.
I have also tried rebilding the phone, both from a backup, and restored as new. I have taken the phone to an apple store and had them restore it as well, they claim to be able to restore "deeper" than what I can do at home, I assume this is similar to flashing the firmware and not just the software. Doing any kind of restore does seem to help with the speed problem for about 2 days as it slowly gets worse and returns to its ever slow and defective operation.
I have not noticed any problems with my ipad v1 running ios 5.0.1
Two of my freinds complain about a similar experience with ios 5 on the iphone
Does anyone have similar problems or an idea for a fix?
Message was edited by: AtomicFlx
Message was edited by: AtomicFlx

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

No Battery Charge and Other Problems After OS3 Install - Solution?

This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
WHAT I'VE BEEN TOLD BY APPLE:
1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
3) Initial data transfer after email configuration . . . but symptoms continued long after this.
4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
SOLUTION: Turning off "push" on your exchange email account
1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
3) Scroll down and select - Advanced -
4) Identify and select your Exchange Server account
5) Select - Fetch -
6) Leave settings
Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

HT4623 Sound and other problems with Ipad 3 after ios 6.1.3 update

I purchased Ipad 3 last year and got problem of losing sound when I restored the Ipad throgh itunes. The sound came back automatically after I charged the device to 100%. Recently I got the same problem when the operating system was Ios 6.1.2 and then i got updated it to ios 6.1.3. The problem has not been solved while has been added up. Now the Ipad operation is slow, its either freezes and crashes frequently. Once it gets in sleep mode then it does not come back untill i press power button and home button togehter for sometime. I have checked all settings like mute and have restored the ios multiple times on two separate PCs but the problem is still there. Please help me what i need to do next.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Brutalizing my Hard Drive... and other problems

I just got an iBook G4 a month ago, and I am first trying to edit a movie now. I can't buy Final Cut pro, and I don't feel like I should have to based on the kind of movies I would like to make. But I have the following problems:
1) I would like to be able to import video at a lower resolution or something that would make my project take up less space... my internal HD is only 40GB and my external is 80, and small amounts of video take up huge amounts of space. And as someone noted, trashing these clips seems to do nothing. Which is very frustrating. I do not see the reason for "non-destructive" editing.
2) I don't know how to make the project originate on an External HD. Is this because it is USB? On my old (windows) computer I could use USB to import from the camera at a lower resolution, and now with only the firewire option and apparently no way to downgrade how much space the file takes up, putting it on the external drive would be a great help.
3) I have used final cut, and it actually seemed easier to do things such as trim the length of a clip at either end, slow it down, speed it up, reverse it, and more. I do not see any intuitive options to do these things (other than awkwardly clicking on the ends of the clip in the timeline to shorten it... but why can't I work with the clip alone?) , and I feel stupid. But the help option has nothing on it either. iMovie must have these capabilities, yes?
I am sorry for the long post, but I am frustrated. I find this to be the opposite of GarageBand, which was so intuitive I could mave music even though I had no goal in mind. I know exactly how I would like my simple movie to go, and I feel that the software is standing in the way. Would iMovie 4 be better? How do I downgrade?
Thanks.

David B.
I'm presently working on a wedding video, to go onto a DVD ..a bit more than 20 mins! ..And also on a video of some people doing Qi Gong (Chi Gung ..however you pronounce it ..you know: slow-moving oriental exercises) and both of those DVDs will need Chapters ..guests arriving; wedding ceremony; reception; speeches; dancing; people falling over and being ill ..we-e-ell; you know.. and the other has Chapters for each of the different exercises (..twisting left and hurting your back, touching your toes and getting cramps, swinging arms above head and smashing the lampshade, etc).
So I often make movies ..and DVDs.. which are longer than 20 mins ..though the last one was only 9mins or so, but that was a copy of some old VHS tape from 20 years ago for a cousin who's getting married next(?) week.
Chapters let you jump (..forward or back..) to a particular element of the video/DVD which you want to play again, without having to negotiate menus.
And other videos - of the eclipse, etc - often last 35 mins or more.
Over the years I recorded (..or shot on 8mm!..) a bit of what was happening with friends in Cornwall almost every time I visited them. This now amounts to 3hrs worth or so. Put onto a DVD - or two! - they can jump between chapters to see their daughter the day she was born; then the same girl aged three; then the same girl getting married, etc!
So I make long-ish video with iMovie, add Chapters for ease of navigation, then burn onto long-ish DVDs.

After upgrading to Lion 10.7.1 - iPhoto and other programs slow to open and other problems

Am I alone - having lots of problems with 10.7.1. iPhoto is slow and when I export photos it exists iphoto then I restart and sometimes it will works. Safari is slower also. Sometimes it justs hangs and I have to force quit. iTunes is also slower to open. Almost everytime it goes to a checking library for a long time.
Should I go back to previous version? Will I lose my purchase. I do not have disks for the upgrade. I do not want to go back - I have a lot of data and always fear of losing it.
Think Apple knows about the problems or am I the only one and have some other problem?

olegz,
First, thanks for the clear graphics.
Authorization seems to be the hangup here. But instead of dealing with the complications of conflicts in authorization, which might take several weeks to months to iron out - site by site - I urge you to follow a different path.
It looks like you're using Chrome. For this site alone, use either Safari or Firefox, both of which are more likely to have plugins to deal with authorizing your site. Safari is already on your computer, but v.3 of Firefox is stable, too. Frankly, I can't tell you what specifically might be the problem here; but switching browsers will solve the immediate problem.
Sound good? Not so good? Post in this thread so that I or others can solve your problem once and for all!

6280 call handling and other problems

Similar Messages

Maybe you are looking for