6337 lite cpu question

My brother gave me his old computer, it is a pentium III with a 6337 lite mb - there is one vacant ram bank or slot left that I wanted to fill, but the cpu's clamp sticks out over the slot and appears low enough to objstruct the ram chip.  I would like to know if this is a real problem or if I am just ignorant of the proper solution.  Thank you for any help.

Yes, and it wouldn't get past the clip.  I didn't want to really force the ram in though, because I ruined a mb once by doing that.  Removing the cpu fan, and then raising the latch(or clip) seemed like the only solution - but the latch appears low enough to possibly do some damage to the ram when clamped back down.

Similar Messages

  • MS-6337 Lite memory bus problem

    grrrrrr this motherboard is ! or i am stupid! I have
    Ms-6337 lite
    celeron 533 mhz
    hdd 20 gb
    memory 128 mb pc 133
    cdrom and ccccc......bla bla bla
    bios version is 3.3
    problem is that my comp. freeez in win 98se add in win me
    i think that my problem is i can t set freqency of memory bus to 133!
    when i try to set this in bios, the bios told me that main memory clock is set to 100! Ciju ciji uaaaaaaaa Can enybody help me! please!
    p.s. i try to change parts of comp processor, memory(but only pc133,dont have pc 100), hdd and nothing ! motherboard my brain out!  
    help help  

    Happy new year! msi boys! i wish you all best in next year!
    i try mem test with four memory 128mb pc 133, 128mb pc133, 64 mb pc133 and 256mb pc 133 and all crush at 80 % at test #8 modulo 20, ones & zeros, but this memory work fine on another computer! I have aviable on bios only mem bus 100 and 133 and bios set always on 100! so i don t knaow what to do ?? is my motherboard broken or i resolve my problem with another cpu(cpu is ok on another comp) or i must buy some memory pc100???
    if you resolve my problem you are the most clever guys in world!  
    cmok heppy new year
    now i will go in town to drink beer !see you!

  • 815E Pro MS-6337 v1.0 Questions

    Hey all,
    Well my 6163 Pro BX board died so I just installed the 815E Pro board (MS-6337 v1.0) and have a few questions.
    Before you ask why this board, well I found one on e-bay brand new for only $35 and that meant I wouldn't have to buy a new processor, memory, etc.
    Anyway, the board has BIOS v1.4 which is the latest version on MSI's site. In the manual it says to enable Top Tech III to use the thermistor to monitor chipset temps, like my old 6163 board did. Trouble is, there is no setting in the BIOS to do this. Any suggestions??
    I also used 2 case fans w/rpm sensors that plugged into the SYS FAN and PWR FAN headers on my 6163 Pro. The 815E Pro has the same fan headers but I get no RPM readings on either fan. Again, no setting in the BIOS to enable the fan readings like my old 6163 Pro did. What's up??
    One more thing...I can't get my memory (2x128MB Corsair PC133 cas3) to run together @133fsb. They will both run by themselves @133fsb but not together. I've tried different slots but no go. I am able run them both together @100fsb while running the processor @133fsb.
    Is the memory to blame or the board?? I've read several reviews that had no problems running 2 sticks of memory @133fsb. Any ideas??
    Thanks for any help,
    yawny

    Quote
    Originally posted by Kingfisher
    post your system's spec in detail (especially PSU)
    Intel Pentium III 1GHz
    MSI MS-6337 v1.0 815E Pro
    Crucial PC133 (2x256MB) CL2
    32MB ATI AIW Radeon
    Creative Sound Blaster Live!
    Maxtor 40GB ATA66
    LITE-ON LTD-163D DVD-ROM
    Plextor 12x10x32 CDRW
    Antec 400W PSU
    MS WinXP Pro with SP1
    As stated in my first post I've tried a different P/S, processor, memory, onboard graphics, a new battery and cleared the CMOS but still nothing. Thanks again for any help or suggestions.

  • Quarterly CPU question from a rookie

    Question qualifier: I am not a trained or experienced DBA, I have however been thrown under the Oracle bus to set up a Patch and Vulnerability Management program for the Oracle servers.
    Question: Are the quarterly CPUs cummulative? In other words, does each quarterly CPU include the patches from the previous quarterly CPU?
    If not, I would like to clarify theire installation order.
    The CPUs MUST BE installed in the released sequence to make sure that all vulnerabilities are covered.
    a. This is correct. The patches have to be installed in the released order.
    b. This is the official position, but in reality it is not that strict.
    c. It doesn't matter as long as all the patched are applied.
    d. What is a CPU?
    I thank everyone in advance for your help.
    Jonathan

    All these questions are answered in Note 360470.1 (FAQ)
    Basically, CPU patches are security patches likes the ones released by other vendors sent at predefined intervals to contain a list of fixes based on bugs or issues found. They are usually not cumulative (the answer depends on which Oracle product you are referring to).
    About the official position?.. Treat as strongly recommended.
    CPU = Critical Patch Update

  • Oracle CPU question with 11.5.10 CU2

    Just a general question. First time trying to apply an Oracle CPU and in this case applying the July 2010 CPU to our Test E-biz 11.5.10 CU2 RUP7 install.
    My configuration is RH Linux ES 4.8 with a 10.2.0.4 database server running admin, db and CCM services and then an app server running forms and web services.
    I'm referring to "Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (July 2010) [ID 986534.1]" and then the subsequent articles that follow that.
    My questions are:
    Q1. My database level is currently 10.2.0.4. It would appear my steps are first update Opatch (no problem there).
    Then apply 9032412.
    Then it looks like I apply either CPU Patch 9655017, or PSU Patch 9654991.
    But PSU 9654991 REQUIRES PRE-REQUISITE 10.2.0.4.4 so I can't apply that right?
    I will apply 9655017 instead and will that get me to 10.2.0.4.5?
    Q2. My configuration is DB Tier with CCM and an app Tier running forms, reports as mentioned.
    Do I have to worry about the Fusion Middle-ware stuff?
    Q3. Patches to apply to E-Business Suite.
    Looks like 9578142 applies to my environment.
    Check the pre-reqs to ensure I have anything that needs to be applied first.
    Then depending on what modules we use or have installed (does it make a difference) I'll apply subsequent patches say for 'Financials'.
    Q3. Anything else I need to consider? We are patching Test first and when done if it's all good we'll schedule Prod.
    I realize this is a pretty generic question. My main uncertainty is on the db 10.2.0.4 patch and if the 965517 will get me to 102045 or not.
    Update - My first patch is giving me the OUI-67620 superset error which I believe is telling me the new patch contains all the fixes from the existing patch so ok to proceed. Right?
    ApplySession adding interim patch '9032412' to inventory
    Verifying the update...
    Inventory check OK: Patch ID 9032412 is registered in Oracle Home inventory with proper meta-data.
    Files check OK: Files from Patch ID 9032412 are present in Oracle Home.
    The local system has been patched and can be restarted.
    The following warnings have occurred during OPatch execution:
    1) OUI-67620:Interim patch 9032412 is a superset of the patch(es) [  6600051 ] in the Oracle Home
    OPatch Session completed with warnings.
    OPatch completed with warnings.
    Edited by: user6445925 on Sep 23, 2010 3:31 PM

    Hi,
    Q1. My database level is currently 10.2.0.4. It would appear my steps are first update Opatch (no problem there).
    Then apply 9032412.
    Then it looks like I apply either CPU Patch 9655017, or PSU Patch 9654991.
    But PSU 9654991 REQUIRES PRE-REQUISITE 10.2.0.4.4 so I can't apply that right?You can apply this patch -- In the download page, select the patch for 10.2.0.4 database.
    I will apply 9655017 instead and will that get me to 10.2.0.4.5?This is a CPU patch and it will not move you to 10.2.0.4.5 -- Apply either PSU or CPU
    Can E-Business Users Apply Database Patch Set Updates?
    http://blogs.oracle.com/stevenChan/2009/08/can_ebs_users_apply_database_patch_set_updates.html
    Q2. My configuration is DB Tier with CCM and an app Tier running forms, reports as mentioned.
    Do I have to worry about the Fusion Middle-ware stuff?If you do not have Fusion installed, skip the part about its patches.
    Q3. Patches to apply to E-Business Suite.
    Looks like 9578142 applies to my environment.
    Check the pre-reqs to ensure I have anything that needs to be applied first.
    Then depending on what modules we use or have installed (does it make a difference) I'll apply subsequent patches say for 'Financials'.
    Q3. Anything else I need to consider? We are patching Test first and when done if it's all good we'll schedule Prod.Make sure you apply the patches in these docs.
    About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
    Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631 [ID 858801.1]
    I realize this is a pretty generic question. My main uncertainty is on the db 10.2.0.4 patch and if the 965517 will get me to 102045 or not.No (already answered above) -- See these docs.
    Oracle Database Patch Set Update 10.2.0.4.5 Known Issues [ID 1089052.1]
    Changes in the PSU 10.2.0.4.5 release for July 2010 [Video] [ID 1162085.1]
    Critical Patch Update July 2010 Patch Availability Document for Oracle Products [ID 1089044.1]
    Update - My first patch is giving me the OUI-67620 superset error which I believe is telling me the new patch contains all the fixes from the existing patch so ok to proceed. Right?
    ApplySession adding interim patch '9032412' to inventory
    Verifying the update...
    Inventory check OK: Patch ID 9032412 is registered in Oracle Home inventory with proper meta-data.
    Files check OK: Files from Patch ID 9032412 are present in Oracle Home.
    The local system has been patched and can be restarted.
    The following warnings have occurred during OPatch execution:
    1) OUI-67620:Interim patch 9032412 is a superset of the patch(es) [  6600051 ] in the Oracle Home
    OPatch Session completed with warnings.
    OPatch completed with warnings.See (WARNING MESSAGE "OUI-67078" and "OUI-67620" FROM OPATCH WHEN APPLYING 10.2.X PATCHES [ID 553244.1]). If opatch complete with code = 0 then you can ignore this warning.
    Thanks,
    Hussein

  • I7 CPU Question

    Hi Everyone,
    I've been reading these forums for quite awhile and taking in all the great advice and answers.  I now have a question regarding processors.  I understand the opinion that under the current price points, the i7 920 is a superior buy than the 940.  Because the hefty price differences don't justify the limited gain one gets with the 940.  My question is this, Frys has the 940 on sale for about $330 and currently the price I see on the 920 on places like newegg is $280.  Given the $50 difference is it worth it to buy the 940 or is overclocking the 920 still the way to go? (I'm not worried about spending the extra 50 bucks, but more curious if I should).  I picked one up since they stopped production on them and quantities were limited, but I have two weeks to return it.
    I'm going to build a new computer over the next couple of weeks, and then plan on swapping out the cpu when the new versions come out later this year and drop in price (assuming they are compatible with the x58 motherboard, which I believe I read they would be).  But for now, I need a faster setup than my Q6600, 64 bit vista, 8 GB.  The rendering times on some of my projects are killing me.
    I primarily work in Premiere Pro and Adobe After Effects, both CS4 versions.  Most of the videos I create are either industrial for DVD / Web or web videos created with green screen.  I also make short films for film festivals.
    Any opinions would be appreciated.
    Take care,
    David

    That Fry's ad is a day behind in my East coast area.  $329.99 is a super deal.  Fry's also has a Cooler Master case, Elite 341 Mid Tower on sale for $14.99 after a $10 mail-in rebate.  This case is listed on Newegg.com for $50.
    While I was at Fry's yesterday I saw a computer with a large LED touch screen. I did a search for a hi-def *WMV on this system. The playback was amazingly vibrant and sharp on the clip that I found.
    I wonder if an LED would be a good choice for a video editing reference monitor. I noticed in the TV section at Fry's that the Samsung 55" LED's have a picture so sharp and clear that motion picture level special effects look less realistic.

  • New W530 CPU question

    Happy holidays all...
    I ordered a W530 to replace my W510 and I have a question regarding the config. The machine I ordered is as follows:
    Processor
    Intel Core i7-3920XM
    Operating system
    Windows 7 Professional 64
    Total memory
    8 GB PC3-12800 DDR3 (2 DIMM)
    Hard drive
    500GB HDD 7200rpm
    Video
    NVIDIA Quadro K2000M 2GB
    I was tossed between ordering the i7-3920 and the i7-3820QM and would like to know if there is a meaningfull difference in performance between both CPU's as it relates to running multiple virtual machines and heavy CPU dependant games like Microsoft FSX.
    I'd also like to know if the W530 is better at managing cooling than the W510, especialy under heavy workloads.

    Not sure about the W530.
    The W520 uses a different (and more noisy!) fan for the XM processor - since the XM draws 10W more power.
    W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
    Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

  • Cpu questions

    I am buying a 27 inch iMac.
    Main use is tv and dvr. I don't save the shows for long so I can use the 1tb hdd.
    My real question is How much difference in the cpu's? I read the i7 is fastest and can hyper thread to allow the machine to think it has more then 4 cores. It is 2200 if I buy the i7.
    I see the quads have the better video card as stock.
    So if I buy the 3.06 it is 1850 after the video card upgrade.. so do I need to spend the 350 extra for the cpu upgrade?
    I figure If I buy the base model I am using it with the better graphics card. Is anyone using the 27inch model with a 3.06 cpu and the graphic card upgrade? I think my model will have the screen fix
    (yellow -flicker) done by the time I order.
    How hot is the 3.06 vs the i7? Any input will help me to decide.. 1850 is a boatload of cash for me to spend. 2200 is worse but I need the 27inch all in one. Thanks
    Message was edited by: philipma1957

    Hi Philip,
    The 27 inch i7 is a very fast CPU is very fast I use it Final cut studio 3 and its a beast, it is very fast, I could tell you this its a fantastic computer I got it with 4 gigs of ram and just upgraded from i5, to the i7 I think its worth the extra bucks, go directly to apple store and see if they have i7 on stocks because they are fantastic machine I love it, I am satisfied with my computer, but don´t get overwhelmed with reading about the negative points of the machine there are a few here that are making a good rant about it. But if I was you I would go get it at the apple store that way you know what your getting and if your not so sure about the machine; boot it up at the store. But for video and heavy duty processing this machine is very fast, as I type this to you I am rendering a final cut pro movie its going to take me 4 min to get it done.
    I also would suggest that you get 8 gigs if you want to open lots of programs, and do heavy processing.
    Hope this might of help.

  • 770-C45 Motherboard and CPU question

    I have referred to the CPU compatibility chart for this motherboard and my question is in regards to the AMD Phenom II X4 965 Black Edition CPU. I see other 965 CPU's listed as compatible. I realize that this CPU is 140 watts. Is this a problem. Could someone please clarify this for me.
    Thanks for your time

    thanks for the assistance, I have decided to go with a 955 instead of a 965.
    I also read the Memory sticky and it said to look for AMD tested RAM. I am using tigerdirect.ca and dont see any RAM that says it has been specifically made for an AMD. Currently I am looking at  Kingston PC10600 1333MHz 4GB DDR3 (KVR1333D3K2/4GR). I only plan to use 2 as per the guide. Any suggestions.
    Thanks for clearing up my earlier question.

  • HELP ! CPU question on MSI K8N Neo4 Platinum/SLI Motherboard

    Hello i've a simple Question : Does A64 3400+ S939 works on this board ?

    Hi douglasp,
    Things haven't changed since K8N Neo4 Platinum SLI + athlon 64 3400+ ????
    There is no AMD64 3400 939 CPU - see AMD Athlon™ 64 Processor Model Numbers and Feature Comparison
    754 CPu are single channel compatable withK8N Neo Platinum
    939 CPu are Dual channel. compatable with K8N Neo4 Platinum
    as someone said in previous thread it's probably a misprint.

  • Another memory/cpu question/s

    I have searched the forums, and the links everyone has posted , and i cant find a answer to a few questions i have !
    #1: I have seen nothing on what brand ram would work using 2-1gb in dual channel ,on the k7n2-Delta , all the tests/talk has been using 512 or smaller ,any ideas??
    #2 : Can I run pc3200-400fsb memory (1gbx2) with a 333fsb Athlon-XP-3000+ , and will it lessen or gain performance by doing so??
    #3 : What is the highest CPU(socket A) that i can use on the k7n2-Delta(would a  3200+ etc work ?) or am i limited to the 3000+ ,as i seem to get that feeling from some posts i have read , or if it will work would i be better off getting a 3200+-400fsb along with pc-3200 1gbx2 (refer to #2)
    The reason im asking these questions is i want to add more ram (currently at 1gb and want to use 2gb ) but im not sure which brand would even work as i have seen nothing posted about using 2gb in dual channel and only a few manufacurers offer 1gb sticks ,let alone a matched set for dual channel, and i am unsure of the REAL limitations of this board and weather i would notice a difference by adding 400fsb ram while still using the 333fsb cpu , then if needed later swapping out my 333fsb cpu for a 400fsb cpu of the same speed or higher , or leaving it as is ,or if i can even do the upgrade i want to do to this board !......any help would be appreciated!!!!

    well i tried the board with a barton XP3200 and a Corsair value kit 2x512mb PC3200..
    didn't work well.. it froze half of the time.. when playing games... it the texture flickers..
    I went to the salesman and changed my RAM to Kingston PC3500 (i know it want work at fsb433!) but underclocking is always good.. still didn't work...
    it seems like its incompatibility... and the board seems to be really picky... MSI motherboards are really stabil... but to be picky? comeon... why didn't MSI made it compatible with the best ram out there...
    why is it only running most of the ram on PC2700?
    i suggest on finding another board if u like ur current ram and it doesn't make any errors in memtest... or check the list for compatible ram in one of the thread here..

  • K7D Master CPU Question

    Hello
    I have a K7D Master with dual 2100+ CPUs, 1GB ram, BIOS v1.82. It started having problems so I sent it back to MSI for repair. When I got it back and started to put it together I noticed that I damaged one of the processors. I looked on pricewatch and saw that a new 2800+ is only $40 more then a 2100+. Can I run the board with a 2800+ in the primary socket and the other 2100+ in the secondary socket. If so, I assume that they will run no faster then the 2100+, however, I would upgrade the other 2100 shortly after. I have to pay tuition this month so I can't buy both 28's right now.
    Also I tried to run the board with the one good processor in the primary socket but the computer won't boot. Does any one know why this would happen?
    Thanks
    Scott

    Hi, I checked the K7D Master CPU Support Status web page and Athlon MP 2200+ is listed, but I can't install windows 2k or windows xp,  stop errors and blue screens appear during the instalation process.
    Is there any bios configuration specially for this processors?
    When is going to be released the next version of bios?
    I had to downgrade the bios to 1.3 version and only windows 2k works, but it detects the 2 processors as Athlon XP.
    Thanks in advance ...
    My configuration:
    2 Athlon MP 2200+
    1.5 gb PC2100 ECC
    GeForce4 TI4400
    Audigy 1394
    C-net Lan card and modem
    2 Maxtor 120 gb, 7200 rpms
    CDRW Lite-on 52x

  • New D20, Windows 7/Vista can't see hard drives - also 2nd CPU questions

    I just got a new D20 and aded a few 1TB Samsung hard drives to the WD one that came with it.  I can see the drives fine in both the Marvell BIOS RAID setup utility (even ran a Verify Disk on them with no errors) and from the ThinkStation BIOS and even from a Linux-based utility that I used to partition and format them with.  But neither Windows 7 RC nor Vista x64 Ultimate can see any of the drives and when I try to load drivers fro the driver CD that came with it, they aren't recognized or loaded.  Probably there is a simply BIOS setting I've screwed up but it has me stumped.  Any clues?
    Also the machine came with one dual-core E5502 CPU.  If I want to add a 2nd CPU does it also have to be the same as the 1st or can I add a quad-core E5504 or even a higher speed quad-core as long as it is a LGA1366? Does it have to be a Xeon or would an i7 work?
    Many thanks in advance!
    ThinkStations: D10, D20, and S20
    ThinkCentres: S50, M51, A61e
    ThinkPads: W520, X60T and X61T SXGA+ tablets

    welcome to the forum!
    sounds like that D20 arrived in one piece.
    the latest marvell driver for vista 64 can be found here.   i suggest trying that first to make sure this isn't a driver issue.   also check that you have the intel chipset and matrix storage drivers installed.   they can be found here.
    check the BIOS and see if the AHCI mode is set to SATA RAID.   i can't remember the exact path to this setting right now but can reboot and write it down if you get lost.
    on the processor, the second one does have to match the first unless you replace the first completely and install two new chips.   an i7 might work as a single processor in socket 0 (this is untested so i cannot confirm).   however, you'll need two xeons if you want to run two physical processors.
    i suggest reading the following links for reference:
    Hardware Maintenance Manual
    Processor Instructions
    Heat sink
    Hardware Replacement Guide
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Oracle 9i Lite Licensing Question

    In my applictaion I plan to use only The local Oracle Lite Database. (Not the mobile server or sync or anything).
    Do the same licensing rules apply or can this be included free of charge if they customers have their oracle server licenses?
    BR
    Tim

    The installation media can be downloaded from the following link:
    http://www.oracle.com/technology/software/index.html
    You will need to agree to the OTN license agreement before you download the software. The install media contains Personal, Standard or Enterprise. Each edition contains the SQL Worksheet.
    If you install the database on your PC, the install will include the client tools to connect to the database so there is no need to do a separate client install on the same machine.

  • Oracle 8i Lite login question

    I have installed Oracle 8i Lite on my notebook computer running Windows 98. When I tried to login to a SQl*Plus session (using all of the combinations of default usernames/passwords, I get the error message: "ORA-12203: TNS: Unable to connect to destination" Would appreciate any insights as to how to proceed further. Also--is it necessary to type something in the "Host String" field?

    I have installed Oracle 8i Lite on my computer, which has Windows 98. But I have been unable to access the database after trying several combinations of usernames & passwords such as tiger/scott and system/manager, among others. I must be missing a step somewhere in this process. I'd greatly appreciate any suggestions. Try "SYSTEM/P".

Maybe you are looking for