64-bit Nightly v29 and Firefox v26 under Win7 64-bit are so slow for streaming, achieving only 4% of BW otherwise achieved by the sam firefox under Win7 32-bit.

Under my Window 7 64-bit OS, I've installed both Nightly Build v28 and v29 to perform "internet speed test" and each time, I can only achieve something < 2 mbps for my home Wi-Fi, gateway router which is about >56 Mbps. The only working Nightly version was v23 that could achieve close to >52 mbps. But once I update v23 to higher version, all the normal high speeds I could achieve at Nightly v23 are gone. The same issue plagued also firefox v26 under Win 7 64-bit.
For clarification, this is not true under Win 7 32-bit OS - the same firefox v26 works fine to achieve the raw BW speed close to and >56 mbps. WHy not in 64-bit OS seems to be the main question?
What's going on? I greatly appreciate you looking into and helping me out on this dilemma. Thanks!
Sincerely
Shao Ma

hello Shao Ma, when you are using speedtest.net or a similar flash-based site to measure your connection speed then it might be an issue with the protected mode that [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html adobe has introduced] for its flash plugin for firefox. some old versions of f-secure or trusteer rapport are known to cause such slowdowns together with flash, or it might be something similar on your system that is interfering (maybe security software that is blocking/sandboxing the container used for the protected mode, etc...).
as a workaround you could try [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] & see if this makes a difference.
in case you'd like to troubleshoot the issue further, it would be best to contact adobe's support & file a bug report at bugbase.adobe.com (choose "Adobe Flash Player" as the product & "Browser Integration" as the product area), since they will have a better understanding of the internals of flash protected mode & therefore may know what else might be at the root of the problem you were seeing.

Similar Messages

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

When using the same Firefox profile in Ubuntu 12.04 and Windows 8.1, how can I keep autoscrolling enabled in Firefox for Linux?

I access the same Firefox profile in Ubuntu 12.04 and Windows 8.1 (Windows fast startup disabled). I have the newest version of Firefox (26.0) on each system.
Every time I launch Firefox in Ubuntu after using the profile in Windows, I notice that autoscrolling is disabled. So I have to manually enable it every time after using my profile in Windows.
Conversely, every time I launch Firefox in Windows after using the profile in Ubuntu, I'm asked whether I would like to set Firefox as my default browser. I choose "No", first making sure that there is no check mark next to "Always perform this check when starting Firefox". I have to do this every time after using my profile in Ubuntu, despite the fact that if I check my preferences in either OS, "Always check to see if Firefox is the default browser on startup" is not enabled. Note that Firefox is my default browser in Ubuntu but not in Windows, but I have no need for Firefox to check whether it's the default every time it starts in either OS.
I don't know whether these problems are related, but it seems likely that they are. Is there a way that I can keep these settings constant, so they don't reset every time I switch operating systems?

I'm sure that when I close the browser in either OS before switching to the other, the following two conditions are true in the Advanced tab of the Firefox Preferences menu:
1) "Use autoscrolling" is enabled (with a check mark)
2) "Always check to see if Firefox is the default browser on startup" is disabled (no check mark)
The autoscrolling feature allows you to scroll by holding down the middle mouse button and moving the mouse up and down. The extension you linked to, ScrollyFox, enables scrolling by clicking a button in the Firefox UI, which is quite a different feature. So unfortunately the problems still remain.

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??
I'm asking because I purchased an app with an id that has been cancelled so I cannot update that particular app. I can purchase the app with my new id but I don't want to do so if its going to erase all the data I have with the previous purchase...

Figured it out. Thanks.

I have a macbook pro and a ipod and yesterday while I was on my laptop on Facebook playing words with friends with my daughter who was on the iPod playing under her user name it seems that they combined into one profile. what happened

I have a macbook pro and a ipod and yesterday while I was on my laptop on Facebook playing words with friends with my daughter who was on the iPod playing under her user name it seems that they combined into one profile. what happened? they used to be separate and we could play against each other but now it says its the same user for both even though I signed in on facebook with my log on and she was on her ipod with her profile. can I fix this?

You might need to be asking the folks at Facebook.

HT1711 On my System ITunes has stored songs under Itunes/Music and the same song under Itunes/ItunesMedia/Music - Why ?

I am trying to organise and consolidate media on my system and Oit seems that ITunes has stored songs under Itunes/Music and the same song under Itunes/ItunesMedia/Music - Why ?
Thanks,
Don

While looking at some of the dupliates - I noticed that there were some Triplicates !!!
For some reason there are copies of *Many* Songs under user/me/MyMusic/ATunes/ItunesMedia/Music !!!
$%^$^@^!(@&)*!_(#&^%#^$%@#

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Firefox jumps from tab group to tab group when tab is closed. Why? It should stay in the same tab group.

Firefox jumps from tab group to tab group when tab is closed. Why? It should stay in the same tab group.
Is it bug? In any case it is very inconvenient.

Ahh. Thanks. That seems like a bit of a hassle though. If I were to create more tabs in the group, would I have to re-bookmark all the tabs?
I would really love it if I could just pull them in and out of the tab group screen :)
Thanks for your help!

HT204053 Can I have 2 different countries billing address under one Apple ID? I mean 2 countries credit card for payments at the same time under unique Apple ID.

Can I have 2 different countries billing address under one Apple ID? I mean 2 countries credit card info for payments at the same time under one Apple ID.
I do travel very often to overseas. I'm having problem with few apps that can not be updated when I'm using another countries store. I do have 2 countries billing address. So when there is an update I need to switch my county & billing address for few selected apps. I was wondering if I have option to add both countries as my billing address that would be great under same Apple ID. Is this option available?

You can only have one credit card and billing address on your account at any one time.

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

If I have converted my purchased iTunes songs to a lower bit rate what will happen when I join iTunes match? Will they match up or will these be stored as duplicates of the same song?

If I have converted my purchased iTunes songs to a lower bit rate what will happen when I join iTunes match? Will they match up or will these be stored as duplicates of the same song?
I ask because I primarily use my work laptop which has limited space so I usually convert my purchases to 160k from 256k in order to save space. I want to sign up for iTunes Match but I'd like to know before I do so I can understand how I will have to set up my library.

crichton007 wrote:
What I may do is start a brand new library there, copy my tracks from my work laptop using Home Share and then the script to get things in sync before starting over again there too.
Why create a new library? Just add the tracks from the laptop to the existing library on the Mac.
crichton007 wrote:
I was just hoping to hear definitively whether or not there was some sort of intelligence built into iTunes Match that would match these up...
How do you mean? If you down-convert purchased tracks you've fundamentally changed the files so iTunes can no longer recoginize them as "purchased." And, indeed, they no longer are since they are brand new files. Of course these new files will only be "matched" or "uploaded."

When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

Just had this same problem. Based on other suggestions I found on the web, went to C:\Program Files\Mozilla Firefox and deleted all files that ended with upgrade and/or delete. Then I was able to uninstall Firefox and then reinstalled. Hope this helps!

I am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks.

i am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks. when a peaks get detected it would trigger a pulse of approx 1 sec duration and at the same time it would disable the other peak detector for 1 sec time duration. after the time period, again both the peak detectors would be enabled. i have been able to detect both peaks but still not able to control the detectors block the way mentioned before.
the code and the data are attached.
Attachments:
eog peak detection.vi ‏192 KB

I'm not suggesting any of this as a model, and your needs are different than mine.
1) Go to Preferences -> Audio. Under "Default Audio Tracks", Set "Mono Media: Mono". Set "Stereo Media: Mono" (Choices from the pull-down for both are Use File, Mono, Stereo, 5.1, Adaptive)
You can change these, but I don't. I am using both mono and stereo tracks. I set up a custom sequence with the particular combination of stereo and mono tracks I want.
2) Set audio for clips by selecting all clips and going to Modify Clip -> Audio Channels Tab. Under "Number of Audio Tracks" there should be a "1". Under Channel Format it should read "Stereo".
I am not sending the audio to anyone else to edit further. I am doing a final stereo mix. If camera one is set up to record 2 mikes as a stereo track, then I leave that unchanged and put it onto a stereo track. If camera two is set up to record one mike onto channel 1 as ambient sound and channel 2 is a mono feed from a sound board, then I modify those clips as Preset Mono, 2 audio tracks, Channel format Mono, and that puts the left source channel (or whichever I choose) onto Audio track 1, channel 1 (of one), and right source channel onto audio track 2, channel 1.
4) Delete all the existing audio tracks in the sequence and replace them all with mono tracks, so all tracks in the sequence are mono.
I modify the tracks while creating the sequence, and ultimately use a custom sequence.
Under my Effects Controls panel there is only Channel Volume, and nowhere to adjust the pan.
I'm using the mixer, not the effects control panel.

BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

You two are obviously talking about the LCD pixels being killed. What exactly does it look like?
How many minutes are you talking about, 2 to 3, 5 to 7 or more?
Where was the brightness control at for the both of you?
KOT

64-bit Nightly v29 and Firefox v26 under Win7 64-bit are so slow for streaming, achieving only 4% of BW otherwise achieved by the sam firefox under Win7 32-bit.

Similar Messages

Maybe you are looking for