64-Bit OS' no longer work on GT780DXR

Hi there,
Hopefully someone can help point me toward what might be going on here; basically the other day when turning my laptop on, it made it to the Windows 7 loading screen (with the rotating coloured balls), before suddenly crashing out and BSOD'ing. Attempting to boot up with last known good configuration did nothing; attempting to restore the OS did nothing. They would all reach the exact same point, and then BSOD. My first thought was that it might be the memory (As this notebook was previously sent back to RMA under warranty due to faulty memory), so I performed a Memtest. This showed no errors at all. I then checked the processes that were loading as the computer booted up, and it seemed to always crash when calling up classpnp.sys.
My next step was to attempt to do a fresh reformat of the system, wipe it clean and install Windows 7 64-Bit from scratch; this turned out unsuccessful as every time the process began, it would then BSOD. I had recently upgraded to Windows 8, so I figured I would just try installing that from scratch too. That got a little bit further; it would actually load in to the installation process, locate the hard-drives, and reach about 25% of installation before crashing out.
Getting quite frustrated, I decided to resort to attempting an old Windows 7 32-Bit installation, and lo and behold that worked without issue. OS installed perfectly fine, have been able to boot up no problem since. This however obviously isn't ideal, because 32-Bit can't support the RAM the machine has to offer, and I'm not too inclined to waste the potential with a slower system. So what might be causing the problem? The fact that 32-Bit OS' don't use above a small threshold of RAM made me consider that it is in fact the RAM that is causing the issue, as when the 64-Bit OS tries to access it during install, it's crashing... But I might be wrong, and the only issue now is that it's out of warranty, and I can foresee getting an RMA being quite expensive, and it will be the second time the RAM modules would have died on this system.

Quote from: Tyrilxe on 22-March-13, 00:44:30
Well, I was a bit hesitant about opening it up and changing things around; but I decided to go ahead and try. Removed one of the sticks of RAM, booted up the laptop and attempted to install Windows 8 64-Bit. No problems at all. Installed perfectly fine, all set up and running. Figured it was down to the memory module then... However, then after shutting down the laptop and booting back up again, it seems all my start-up options are gone (Can't press del to get into BIOS, can't hit F11 to get to boot device etc) and it just goes straight to a black screen saying BOOTMGR is missing, and to Ctrl+Alt+Del to restart.
Well, lets deal with 1 thing at a time.
The fact that you could now fully install Windows 8 x64 without a single issue (as far as getting it installed..), really lends itself to believe that you had a bad stick of memory.
The whole bios thing now, that's a seperate issue. Does the screen display anything before the black screen saying "BOOTMGR is missing"? You should at the very least see the video bios and other things pop up in some way, since I don't think the GT780 had UEFI enabled on it, did it?

Similar Messages

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

Couple of things to check:
You are using Outlook 2003, 2007 or 2010
You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook. Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/). This requires Outlook 2007 or 2010. If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings. Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
For syncing Ringtones confirm that:
The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
You have checked each of the ringtones you want to sync
You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
You have checked Sync Tones on the Tones tab of your iTunes sync settings

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

OS 10 has prompted a requestion to uncheck a box next to open in 32 bit..howver the box is already unchecked..itunes no longer works in OS 10 for me! Dang. Any suggestions?

OS 10 has prompted a requestion to uncheck a box next to: open in 32 bit..however the box is already unchecked..itunes no longer works in OS 10 for me! Dang. Any suggestions?

Persistent message to deselect 32 bit option - https://discussions.apple.com/thread/5955627 - old plug-ins

"Open with Explorer" no longer works with IE 10 & 11 without 32-bit -- What alternative do we have?

I know that if we open SPS 2010 in IE 10 & IE 11 in 64-bit O/S, "Open with Explorer" no longer works because this function requires 32-bit version of IE.
I give up to find a way to open IE 10 in 32-bit -- I had tried several so-called solutions but none works for me. So, I'm looking for an alternative: is there an URL that I can put in
Windows Explorer's address bar to open the SharePoint page directly?
I had tried http://mysps/somefolder/etc/ failed!
I had tried \\mysps\DavWWWRoot failed again!
So, I would like to hear to those who have succeeded to use "Open with Explorer" with IE 10 or 11 installed in 64-bit O/S.

Hi Horinius,
According to your description, my understanding is that "Open with Explorer" didn’t work with IE 10 & 11 in SharePoint 2010.
I commend you use IE 10 or 11 32-bit rather than 64-bit. Then check whether the browser SharePoint add-ons are enabled. If not, please enable them.
You can check browser add-ons by opening IE->Tools->Programs->Manage add-ons-> check all add-ons related to SharePoint, such as SharePoint OpenDocuments Class. If there is not any add-on related to SharePoint, please repair your Office by clicking
Control Panel->Programs and Features-> select your Office, and right-click it, then select ‘Change’.
Please make sure that webClient service is running on your machine by opening Start->Administrative Tools->Services.
Here are some similar posts for you to take a look at :
http://social.technet.microsoft.com/Forums/en-US/233c285b-1359-4d2b-82bf-009565bf93da/sharepoint-open-with-explorer-not-working?forum=sharepointadmin
http://wmostafaw.wordpress.com/2011/12/08/opening-list-or-document-library-in-windows-explorer/
http://stackoverflow.com/questions/8926551/your-client-does-not-support-opening-this-list-with-windows-explorer
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

My ebook reader no longer works now I have upgraded to Lion. I have reset the PRAM and tried booting in 32-bit mode, all with no joy.

My ebook reader no longer works now I have upgraded to Lion. I have reset the PRAM and tried booting in 32-bit mode, all with no joy. Come on Apple, it worked fine with Snow Leopard.
I see a lot of other people are having trouble with ebook readers, cameras, and other USB devices too.....

antonfromnelson wrote:
...Come on Apple, it worked fine with Snow Leopard...
Sorry, you're not talking to Apple here only other users like yourself.
Someone might be able to help if you post which e-book reader you are using?
Regards,
Colin R.

IPod Apps no longer work, Music disappears, Fix?

QUESTION : How to fix permanently the “iPod Touch Breakdown“?
(seems identical to the iPhone “Breakdown“)
Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
Here is what I call the “iPod Touch Breakdown“:
- Apps won’t start : the iPod would go back to the home screen after a few seconds.
- Music and Films disappear (My music consists essentially of personnal CDs).
- (for me Photos are still there)
- all original Apple Apps work OK
This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
Two ways:
see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
1- sync using iTunes
2- in iTunes/Store: deauthorize your account
3- sync
4- authorize
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
(the whole process may take several hours; I have also done a reboot between 3 and 4)
(ii) proposed by various people :
1- deselect all applications
2- sync
3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
4- select the Apps you want back
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
Sadly,
because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
Cheers
(*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

Same issue here since updating to 2.0.2; Is there a way to back I wonder?
So I plugged back in my iPod touch and,...
0. make a note of all your music, movies, photos, apps selections to restore
1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
3. clicked <OPTION>[Restore] once selecting my iPod touch device
4. navigate to <home>/Library/iTunes/iPod Software Udpates/
5. pick the prior update: iPod1,12.0.1_5B108Restore
6. then waited through iPod window status displays
'Preparing iPod software for restore...'
'Restoring iPod software...'
'Verifying iPod Software...'
7. OK the 'Your iPod has been restored to factory settings,...'
8. Ssync process did NOT automatically being so I unplugged & plugged it
(I did verify that 2.0.1 was loaded seeing the App Store)
9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
(mostly 'cause I couldn't be sure which was a good failsafe).
10. iTunes then begin setup of my [ahem] new iPod.
STOP IT; it'll try and do restore everything. Then navigate the tabs for
your iPod and re-select those things you want (music,photos,movies,apps,etc)
So like any computer you need to keep proper backups.
The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
HTH
/los "I was a teenage net-random"

Surf stick no longer working with Lion

Hi all,
first time I had a bad experience with apple products:
I have installed Lion straight away and unfortunately my 3G USB surfstick is no longer working. I have the T-Mobile Internet Manager 03 and no connection is available at all.
Seems it has something to do with the Novamedia Disk Suppressor. No longer supported???

Well, heck.
I am so sorry you guys couldn't get through to me. you can email, [email protected] anytime for full support.
On the issue of Lion, and the XLR8 devices?
Apple did change a number of items, that limited the XtraView's ability (this is the one, with the built-in audio on the older 2820 chipset). Audio, just won't work in 64-bit mode.
The easy workarounds are to boot into 32-bit mode (hit 3 and 2) on boot.
To check if you are in 64 bit mode, go to the System Profiler (Apple Menu > More Info > Software (left pane) and see if the 64 bit is loaded.
If in 32-bit mode you are still having an issue, please check that you are running XLR8 version 1.4.6. You can download new versions at http://XLR8.com.
You can email XLR8 for a free audio cable (Mac sound jack to RCA audio), or for $25, XLR8 can upgrade you to the new 2860 device that works in 64-bit mode.
Now, that hopefully, we have you working again... about Daystar. Actually XLR8 has always developed, built and shipped the devices. Daystar just had a bigger name and was an Apple Authorized Reseller. But, the Apple relationship ended, and Daystar closed.
XLR8, LLC will continue to support the devices and we will continue to provide great products and good support (sorry, we are a small company, and due to limited time... I can only provide "good" support. Maybe one day, it will be great.)
We are expanding the website at XLR8.com. You are always welcome to provide feedback and suggestions.
Oh, and lastly, thanks to Thiago, for sending me an email, and alerting me to the thread...
Gary,
XLR8
[email protected]

Bose headset no longer works on iPhone 4

My Bose headset, which worked flawlessly on 3GS, no longer works for voice control and voice memos on my new iphone 4. They still work fine as headphones but the microphone no longer is operational. The Apple supplied headset works and if I unplug the Bose set the voice dialing and memos work okay.
But when I use the Bose headset and try to record a voice memo it includes a rhythmic static every half second or so. Voice control is completely non-operational with this headset. I'm thinking something with the noise canceling is screwed up.
Anyone have any possible work arounds?

Ya, this is a bit of a Joke.
I have an $80 pair of skullcandy headphones with Mic that I just recently purchased for my iPhone 3G. When I jumped to the iPhone4 it doesnt work. The apple headset works every time. When I plug in the skull candy, I can hear the person I'm calling but they cant hear me and to add to that, there is this staticy pulsing sound on the line from the headset. If I press and hold the Talk/Music button on my SC headset, the person I'm calling can hear me but they say I sound like I'm in the background. I thought as you did that the mic on the phone was then in use, but when i disconnected the headset, the person I called said it changed and I sounded "Really" far away at that point.
Apple: So how do I fix this? I refuse to carry around two headsets and the apple headset is less than desireable for quality music listening.

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

PgUp/PgDn no longer work after upgrading to Firefox 4

I just upgraded from Firefox 3.6 to 4.0., and now the PgUp/PgDn keys (page up/page down) no longer work. Or rather, they act as though caret browsing (F7) is turned on, which it is not. (In caret browsing, PgUp is like the back button and PgDn is like the forward button.) To confirm that caret browsing is off, I've hit F7 and clicked No (multiple times), and also checked about:config, which shows that accessibility.browsewithcaret is false.
More info: (1) Options > Advanced > General > Always use the cursor keys to navigate within pages is unchecked, (2) the PgUp/PgDn keys also don't work when Firefox is restarted in Safe Mode, (3) they don't work on any webpage, (4) they do work correctly in other applications (Microsoft Word, etc.), (5) my operating system is Windows 7 Home Premium (64-bit), and (6) I run Microsoft Security Essentials (antivirus software).
Any ideas?
Could this be a bug? If so, what is the procedure for uninstalling Firefox 4 and returning to Firefox 3.6 -- without losing my bookmarks, add-ons, etc.?
Thanks!

dmtf2010 nailed the problem here (https://bugzilla.mozilla.org/show_bug.cgi?id=640587#c48):
So, the solution is:
1. Go to about:config
2. Find ui.elantech_gesture_hacks.enabled
3. Change its value from -1 to 0
4. Restart FF
5. If you run into a bug that option was designed to fix (non-working page swipe gestures), install the latest Elantech driver (http://www.techspot.com/drivers/driver/file/information/14513/) and reboot.
I've tried his solution and, so far, so good. :)

Divx and other media related plugins always crash and/or no longer work, please help

Why is nothing of divx seems to work anymore? Every time i try to watch a video online using a divx site or site that uses a divx player, i get the message
"divx plus web player pluging has cashed, send crash report"
I send it - then am offered the option to reload the page once reloaded a press play the player then says connecting and then crashes again!!!
FF this is ridiculas!!
None of the divx plugins are recognised anymore and the divx web player add on is marked as incompatible, and there is not an option to enable it! When i click on the '''bold text'''more '''bold text'''option all that apears is the link to website where you download the exact same up to date version that you already have.
im using windows vista home basic 32-bit operating system, & the new version of firefox.
Its really annoying that these extensions and plugins no longer work crash and/or are no longer recognised espcially considering firefox insisted we upgrade for security issue etc and that 3.6 wont be kept up to date any more, I want reinstall the 3.6 version but am worried about security issues now.
will the divx plugin and addon/extension be added to this new version anytime soon if not what can i do to enable me to watch videos without the plugin crashing ? (i have updated all the pluggins but the problem still occurs) ?

I am having the same problems as well. Every time I turned around there was a new version of Firefox 8.0. Prior to the constant updating of Firefox I was able to watch movies from Stagevu and Veehd and now because of the new Firefox I cannot watch any movies. I also tried the VLC plugin and that constantly crashes as well as the DivX Web Player. I read so many complaints and no one from Firefox or any of the other browser is giving any of their constituents or customers whatever you want to call us any solutions to the problem and I am beginning to get a little frustrated. I have tried all of the other browsers like the Internet Explorer and Google Chrome and I still come up with the same problem.

Help: My password no longer works, and I am unable to log in with my Apple ID

I have a macbook pro, and it has failed to start up for a few months until now. When I get to the log in screen, my old password no longer works. When I then try to reset it using my apple ID and password, an error message appears saying it cannot connect and to check my internet connection, but it gives me no option check or change the connection when this window is up. Additionally, I have tried going into recovery mode and restoring from a backup I have on an external drive which did not work, and reinstalling Yosemite all over again, but I get a message that the disk is encrypted and asks for the password (again, a problem).
If anyone has any advice on something new I could try I would greatly appreciate it!

Hi chc517,
I'm sorry to hear you are having issues with your MacBook Pro. I also apologize, I'm a bit unclear on a couple things about your specific configuration. The message you mentioned about the disk being encrypted would seem to indicate that you may have File Vault enabled. If that is the case and you are having a login issue, you would need to use the File Vault recovery key to reset your login password instead of your Apple ID, as noted in the following article:
OS X Yosemite: FileVault recovery key
Regards,
- Brenden

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

64-Bit OS' no longer work on GT780DXR

Similar Messages

Maybe you are looking for