64 bit version needed to run this phone
I just bought the new iphone 6 and when I tried to sync my phone it said "that I need the 64 bit version of iTunes to run this phone" ive already updated my iTunes and uninstalled and reinstalled iTunes twice. and still it doesn't read my phone. ive also looked into the programs and notice that the apple mobile device is not there in my programs. has anyone had this issue before? what the next step that I should do?
Look under the "Solaris OS Patches" section of the following page :-
http://java.sun.com/products/jdk/1.2/download.html
BTW: 1.2 is about 5 years old - how about upgrading to a more recent release (such as 1.4.1).
Similar Messages
-
Help ,I can't get my phone to be recognized by I tunes,I have downloaded the 64 bit version ,but when I plug my I phone in it says to remove this version and install the 64 bit version ,ahhh it is the 64 bit version ,I am running windows 7
did you get this sorted I have this problem also
-
I bought a mac game from www.gamehouse.com. Downloaded it and now trying to install to play. But everytime I go to install, a message keeps popping up telling me "Your account doesn't have sufficient access privileges. You will need to run this game once from an administrator account. Afterwards you will be able to run it from this account." I am already on the administrator account. Can someone please help?!
Only the developer can fix his apparently defective product.
-
recently i tried to connect my phone to itunes and a mesage poped up saying that i needed the 64 bit version of itunes and that i should uninstall the current one and reinstall the correct version, i have now done this about 5 times and still i get the same message and i cannot sync my phoe whichwas very annoying as i was about to go on holiday any help would be greatly recieved!
Reboot before emptying the Trash, as stated in the article.
-
After installing iTunes on 64 bit Windows 8 systems iTunes will not run. I've tried to install 32 bit, but I'm told to install 64 bit version (64 bit version installs to x86 folder). iTuns will not run even if I attach iPod.
iTunes 11 works fine on my three Win 8 PCs
Try:
Trouble installing iTunes or QuickTime for Windows
Next try posting in the iTunes forum. -
Installation Photoshop Elements 13 Upgr. 32-Bit-Version on Desktop running Win 8.1 64-Bit
I try to upgrade my Photoshop Elements 12 Version to Version 13. Version 12 (32 Bit) is running on PC with Win 8.1 64 Bit. Upgade to Version 13 (32 Bit) is not possible (error: 32 Bit version can not installed with Win 64 Bit system). If I try to install 64 Bit Version of Photoshop 13, I get the information, that there is no original version found on PC.
What can I do?
HaPeAs far as the "no original version" goes, you should also be able to select an option to enter the name and serial number of the older (aka original) version instead of having it already installed.
-
hey everybody im having a problem with an iphone 3gs its stuck on a disabled screen how can i get past this iwork in a pawn shop and im trying to restore this phone for sale how do i fix this
READ the article from which the statement was posted and follow the instructions provided.
-
I have a new computer and it has firefox on it of the 5.0 version and I went back to go download my movies from Blockbuster.com and I couldn't download them because I needed a IE plug-in for Firefox and the 5.0 does not work with it I need to go back and find if I can get a download of 4.0 version of firefox so I can get the IE plug-in for Firefox so I can download my movies.
- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears -
MySQL - what software do I need to run this???
So, I am trying to install MySQL on my Mac ... I download it but then can't seem to find it anywhere. Do I need to be running Mac Server? I am assuming that I don't have the right software on my Mac to run MySQL right now. Anyone know?
Before you can connect to your newly-installed MySQL, you'll need to secure the installation and create an account for yourself. Start with the installation instructions here:
http://dev.mysql.com/doc/refman/5.0/en/mac-os-x-installation.html
In addition to the GUI tools provided by MySQL, I was about to recommend CocoaMySQL, which I see has been abandoned in favor of something called 'sequel-pro':
http://www.sequelpro.com/cocoamysql.html -
i got a new phone and im trying to restore it thru icloud backup restore but its telling me that its not compatiable but i cant get to the new version what do i do?
You'll have to update the phone in iTunes on your computer in order to access your backup.
Connect the new phone to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab, then click Check for Update and update your phone. (If you get a pop-up when you connect to iTunes to update, go ahead and update.) After updating the phone, set it up as a new iPhone, disconnect it from your computer, go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup. Sign into your iCloud account and your backup should now be available to restore from. -
I interfaced ENA 5071B using labview with agena vi. I need to save the s2p file from the network analyzer.. I am requesting you guys to help me and pls suggest wat kind of vi i need to use from agena.....
ThanksThe PNA driver does not have the vi to full support what you want. The SCPI commands to do what you want are:
MMEMTOR:TRAC:FORMNP MA; - to format the data in Mag dB Phase linear.
CALC1ATA:SNPORTsave '1,2' , 'local file name on PNA file system.s2p' - to create PNA local files of s2p data
MMEMory:TRANsfer? 'controllerfilename.s2p' - to transfer the datafile from PNA to test controller using GPIB block transfer.
You will have to create these SCPI commads and VI's for yourself as the driver does not have them built in.
Good luck. -
When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I need help to run this package and i got some error
create or replace
PACKAGE BODY SUBS_INS_API_sun
AS
PROCEDURE SUBSCRIBER_INS_sun
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidactdvcdetailsobj_sun,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
pragma exception_init(Input_Parameter_Is_Null,-2000);
prepaidAccountDetails prepaidActDevDetails_tab:= prepaidActDevDetails_tab(NULL,NULL,NULL,NULL,NULL);
STATUS VARCHAR2(1):='1';
cust_no VARCHAR(10);
m_mac_id VARCHAR2(20);
subscriber_master_Rec subscriber_master%ROWTYPE :=NULL;
flg NUMBER(1);
BEGIN
IF(Source_Sys_Id IS NULL OR Tracking_Id IS NULL OR ACCOUNT_NO IS NULL OR prepaidAccountDetails.LAST=0) THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
select cm_cust_no into cust_no from customer_master where cm_cust_id=ACCOUNT_NO and cm_status in('A','P','0');
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:='0';
END;
BEGIN
FOR i IN prepaidAccountDetails.FIRST .. (prepaidAccountDetails.LAST) LOOP
prepaidAccountDetails1:=prepaidActDevDetails_tab(i);
prepaidAccountDetails1.Status_of_device:='1';
IF (prepaidAccountDetails.Account_id is NULL OR prepaidAccountDetails.Mac_Id is NULL or prepaidAccountDetails.LOB_value is NULL) THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF(prepaidAccountDetails.LOB_value = 'VDO') THEN
IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
END IF;
begin
select 1 into flg from subscriber_master where pm_phone_no=prepaidAccountDetails.Mac_Id and pm_status in('P','0','A','B');
EXCEPTION
WHEN NO_DATA_FOUND THEN
flg:=0;
END;
if(flg=1) then
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
begin
select md_mac_id into m_mac_id from mac_details where md_mac_id=prepaidAccountDetails.Mac_Id and md_start_date<=sysdate
and md_status='A';
EXCEPTION when OTHERS then
Error_code :='SI004';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
end;
if(STATUS= 1 and prepaidAccountDetails.Status_of_device='1') then
SELECT PM_SUBS_ACT_NO_SEQ.nextval
INTO subscriber_master_rec.PM_SUBS_ACT_NO
FROM dual;
subscriber_master_Rec.pm_phone_no :=prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date :=sysdate;
subscriber_master_rec.pm_status :='P';
subscriber_master_rec.PM_CUST_LVL_YN:='S';
subscriber_master_rec.PM_EQUP_CODE:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_HOME_AREA:='HOM';
subscriber_master_rec.PM_USG_CODE:='USG';
subscriber_master_rec.PM_NO_TYPE:='S';
subscriber_master_rec.PM_TCG_CODE:='DEF';
subscriber_master_rec.PM_APLN_DATE:=sysdate;
subscriber_master_rec.PM_USER2:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_USER3:=prepaidAccountDetails.Channel_Line_Up;
subscriber_master_rec.pm_cust_no:=cust_no;
INSERT INTO subscriber_master VALUES subscriber_master_rec;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_sun;
END SUBS_INS_API_sun;
and
i got this error
Package Body PREPAID_TESTNEW.SUBS_INS_API@PREPAID_TESTNEW
Error(73,4): PL/SQL: Statement ignored
Error(73,99): PLS-00302: component 'LAST' must be declared
Error(87,6): PL/SQL: Statement ignored
Error(87,37): PLS-00302: component 'FIRST' must be declared
please help to run this package if anyone knowsnow i corrected my package. It working fine. But, how to run this package via procedure. my procedure check below. I give all the details about my package check below.
---pkg specification
create or replace
PACKAGE SUBS_INS_API_SS
IS
PROCEDURE SUBSCRIBER_INS_SS
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2);
END SUBS_INS_API_SS;
-----pkg body
create or replace
PACKAGE BODY SUBS_INS_API_SS
AS
PROCEDURE log_error (ip_code IN VARCHAR2,
ip_message IN VARCHAR2,
ip_description IN VARCHAR2)
IS
BEGIN
INSERT INTO ERR_LOG (IEL_REF_ID,
IEL_DATE,
IEL_CODE,
IEL_MSG,
IEL_DESC)
VALUES (IVRS_ERR_LOG_SEQ.NEXTVAL,
SYSDATE,
ip_code,
ip_message,
ip_description);
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END log_error;
PROCEDURE INSERT_WS_LOG (SOURCE_SYS_ID IN VARCHAR2,
STATUS IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_ID IN VARCHAR2,
MAC_ID IN VARCHAR2)
IS
ws_log_rec WS_LOG%ROWTYPE := NULL;
BEGIN
SELECT WS_LOG#REC#ID.NEXTVAL INTO ws_log_rec.rec#id FROM DUAL;
ws_log_rec.VER#ID := 1;
ws_log_rec.CRE#TS := SYSDATE;
ws_log_rec.wl_source := SOURCE_SYS_ID;
ws_log_rec.wl_status := Status;
ws_log_rec.wl_tracking_id := tracking_id;
ws_log_rec.wl_account_id := account_id;
ws_log_rec.wl_mac_id := mac_id;
INSERT INTO ws_log
VALUES ws_log_rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END INSERT_WS_LOG;
PROCEDURE REPLICO_DEV_INFO( Acc_id IN VARCHAR2, Mc_Id IN VARCHAR2,channel IN VARCHAR2,
LOB_VAL IN VARCHAR2, outlet1 IN VARCHAR2, kit_cod IN VARCHAR2,
serial_No IN VARCHAR2, shipperr IN VARCHAR2, estm_recived_date IN date)
IS
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
REC_ID NUMBER;
BEGIN
SELECT REPLICO_DEVICE_INFO_DET#RECID.nextval INTO REC_ID FROM dual;
Replico_device_info_det_Rec.REC#ID := REC_ID;
Replico_device_info_det_Rec.ACCOUNT_ID := Acc_id;
Replico_device_info_det_Rec.MAC_ID := Mc_Id;
Replico_device_info_det_Rec.CHANNEL_LINE_UP := channel;
Replico_device_info_det_Rec.LOB_VALUE := LOB_VAL;
Replico_device_info_det_Rec.OUTLET := outlet1;
Replico_device_info_det_Rec.KIT_CODE := kit_cod;
Replico_device_info_det_Rec.SERIAL_NUMBER := serial_No;
Replico_device_info_det_Rec.SHIPPER := shipperr;
Replico_device_info_det_Rec.ESTIMATED_RECIVED_DATE := estm_recived_date;
INSERT INTO replico_device_info_det
VALUES Replico_device_info_det_Rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END REPLICO_DEV_INFO;
PROCEDURE SUBSCRIBER_INS_SS (
SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
PRAGMA EXCEPTION_INIT (Input_Parameter_Is_Null, -2000);
prepaidAccountDetails prepaid_act_dvc_details_obj
:= prepaid_act_dvc_details_obj (NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL);
STATUS VARCHAR2 (1) := '1';
cust_no VARCHAR (10);
m_mac_id VARCHAR2 (20);
channel_lineup VARCHAR2 (25);
LOB_VALUE VARCHAR2 (25);
subscriber_master_Rec subscriber_master%ROWTYPE := NULL;
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
flg NUMBER (1);
plan_code VARCHAR2(10);
subs_aact_no NUMBER(20);
m_plan_code1 payment_transaction_history.TH_PLAN_CODE%type;
m_payment_mode1 payment_transaction_history.TH_PAYMENT_MODE%type;
pm_phone_no_cur subscriber_master.pm_phone_no%type;
pm_status_cur subscriber_master.pm_status%type;
pm_user2_cur subscriber_master.pm_user2%type;
pm_user9_cur subscriber_master.pm_user9%type;
pm_cust_no_cur subscriber_master.pm_cust_no%type;
pm_cust_1 subscriber_master.pm_cust_no%type;
cm_i customer_master.cm_status%type;
CURSOR subs_rec is select pm_cust_no, pm_phone_no, pm_status, pm_user2, pm_user9 from subscriber_master
where pm_cust_no = cust_no and pm_status= 'S';
BEGIN
IF ( Source_Sys_Id IS NULL
OR Tracking_Id IS NULL
OR ACCOUNT_NO IS NULL
OR prepaidActDevDetails_tab.LAST = 0)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
SELECT cm_cust_no
INTO cust_no
FROM customer_master
WHERE cm_cust_id = ACCOUNT_NO AND cm_status IN ('A', 'P', '0');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
ERROR_CODE := 'SI001';
log_error ('SI001',
SQLERRM,
'No Customer exist with Active or Pre Actiavted');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := '0';
END;
BEGIN
FOR i IN prepaidActDevDetails_tab.FIRST ..
(prepaidActDevDetails_tab.LAST)
LOOP
prepaidAccountDetails := prepaidActDevDetails_tab (i);
prepaidAccountDetails.Status_of_device := '1';
IF ( prepaidAccountDetails.Account_id IS NULL
OR prepaidAccountDetails.Mac_Id IS NULL
OR prepaidAccountDetails.LOB_value IS NULL)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF (prepaidAccountDetails.LOB_value = 'VIDEO')
THEN
/* Commented as channel lineup is not coming from the input request */
/*IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
log_error ('SI002', SQLERRM, 'Channel line up is mandatory for Video');
INSERT_WS_LOG(Source_Sys_Id,'F',Tracking_Id,Account_No,prepaidAccountDetails.Mac_Id);
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;*/
SELECT EC_CHANNEL_LINEUP
INTO channel_lineup
FROM ELIGIBLE_CUSTOMER
WHERE EC_CUSTOMER_NO = cust_no;
END IF;
BEGIN
SELECT 1
INTO flg
FROM subscriber_master
WHERE pm_phone_no = prepaidAccountDetails.Mac_Id
AND pm_status IN ('P', '0', 'A', 'B');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
flg := 0;
END;
IF (flg = 1)
THEN
ERROR_CODE := 'SI003';
log_error ('SI003',
SQLERRM,
'Customer Already Exist with given Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END IF;
BEGIN
SELECT md_mac_id
INTO m_mac_id
FROM mac_details
WHERE md_mac_id = prepaidAccountDetails.Mac_Id
AND md_start_date <= SYSDATE
AND md_status = 'A';
EXCEPTION
WHEN OTHERS
THEN
ERROR_CODE := 'SI004';
log_error ('SI004', SQLERRM, 'Invalid Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END;
select pm_cust_no into pm_cust_1 from subscriber_master where pm_cust_no = cust_no;
IF (STATUS = 1 AND prepaidAccountDetails.Status_of_device = '1')
THEN
SELECT DECODE (prepaidAccountDetails.LOB_value,
'HSD', 'HSD',
'VIDEO', 'VDO')
INTO LOB_VALUE
FROM DUAL;
OPEN subs_rec;
LOOP
FETCH subs_rec into pm_cust_no_cur, pm_phone_no_cur, pm_status_cur, pm_user2_cur, pm_user9_cur;
IF subs_rec%FOUND THEN
IF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = prepaidAccountDetails.outlet and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id
where pm_cust_no = pm_cust_no_cur and pm_user9 = prepaidAccountDetails.outlet;
select cm_status into cm_i from customer_master where cm_cust_no = pm_cust_no_cur;
IF( cm_i = '0')
THEN
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
END IF;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
ELSIF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = null and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id, pm_user9 = prepaidAccountDetails.outlet
where pm_cust_no = pm_cust_no_cur and pm_user9 = NULL;
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
ELSIF subs_rec%NOTFOUND THEN
SELECT PM_SUBS_ACT_NO_SEQ.NEXTVAL
INTO subs_aact_no
FROM DUAL;
subscriber_master_rec.PM_SUBS_ACT_NO := subs_aact_no;
subscriber_master_Rec.pm_phone_no :=
prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date := SYSDATE;
subscriber_master_rec.pm_status := 'P';
subscriber_master_rec.PM_CUST_LVL_YN := 'S';
subscriber_master_rec.PM_EQUP_CODE := LOB_VALUE;
subscriber_master_rec.PM_HOME_AREA := 'HOM';
subscriber_master_rec.PM_USG_CODE := 'USG';
subscriber_master_rec.PM_NO_TYPE := 'S';
subscriber_master_rec.PM_TCG_CODE := 'DEF';
subscriber_master_rec.PM_APLN_DATE := SYSDATE;
subscriber_master_Rec.PM_NAME := prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.PM_STAFF_id := '16';
subscriber_master_rec.PM_USER2 := LOB_VALUE;
subscriber_master_rec.PM_USER3 := channel_lineup;
subscriber_master_rec.pm_cust_no := cust_no;
subscriber_master_rec.PM_USER8 := 'Y';
INSERT INTO subscriber_master
VALUES subscriber_master_rec;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
END LOOP;
CLOSE subs_rec;
SELECT TH_PLAN_CODE,TH_PAYMENT_MODE
INTO m_plan_code1,m_payment_mode1
FROM PAYMENT_TRANSACTION_HISTORY
WHERE TH_CUSTOMER_NO = cust_no
AND TH_LOB = LOB_VALUE
AND TH_SUBSCRIBER_NO IS NULL;
IF(LOB_VALUE = 'HSD') THEN
IF(m_plan_code1 = 'SIKI') THEN
plan_code := 'SIKI';
ELSE
plan_code := 'KIT';
END IF;
ELSE
IF(m_plan_code1 = 'SIKT') THEN
plan_code := 'SIKT';
ELSE
plan_code := 'TV';
END IF;
END IF;
UPDATE PAYMENT_TRANSACTION_HISTORY SET TH_SUBSCRIBER_NO = subs_aact_no, th_writeback_status = 'Y' WHERE TH_CUSTOMER_NO = cust_no AND TH_PLAN_CODE = plan_code;
COMMIT;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_SS;
END SUBS_INS_API_SS;
--- type object
create or replace
TYPE prepaid_act_dvc_details_obj--prepaidAccountDeviceDetailsObj
AS OBJECT ( Account_id VARCHAR2 ( 25 )
, Mac_Id VARCHAR2 ( 25 )
, Channel_Line_Up VARCHAR2 ( 25 )
, LOB_value VARCHAR2 ( 25 )
, Status_of_device VARCHAR2 ( 25 )
, outlet VARCHAR2(25)
, kit_code VARCHAR2(25)
, serial_Number VARCHAR2(25)
, shipper VARCHAR2(25)
, estimated_recived_date date )
type---
create or replace
TYPE prepaidActDeviceDetails_tabobj as table of prepaid_act_dvc_details_obj
---- i need to run this package via separate procedure. but i don't know how to pass the variable. because the passing argument contain object tab variable. please help me.. give me suggestion or procedure to run this pkg. -
Asks to run 64-bit version though i'm running it
Cannot find my iPhone. Ask to run 64-bit version though i run it! Tried to re-install but no result
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Can somebody help me?! Those people from sprint gave me an iphone 5s locked, even when inasked for an unlocked one, now i'm outside the country and i need to use it with another carrier and it just say: "sim invalid"
You bought a no contract iPhone, not an unlocked one. Had you purchased a Verizon one the GSM side would have been unlocked but you have to follow Sprint's process to unlock the GSM side of their phone. If there is any way possible you need to return this phone and get your money back or sell it and use the money to buy an unlocked iPhone.
Maybe you are looking for
-
Access violation error with 1.4.0
Our client/server application (RMI) ran fine in 1.3.1. When we compiled and deployed with 1.4.0, an error of "access violation" were thrown by Windows NT or Windown 2000 at run time. Stack trace posted as below. Anyone has any ideas on the cause of i
-
Most frequent heartbeat failure report
hello, I want to create a report, or a sql query that outputs the top 10 servers with heartbeat failures in the past xx days. is there any native report in scom that does this, or a sql query that shows this? thanks.
-
Forgive me if this has been covered before, but I did search and didn't find my specific answers. I synced my bookmarks with my Safari browser on my PC. All is good, except that the sync also copied the default bookmark folders "bookmark bar" and "bo
-
How get xsl variable after transformation in java-code? Edited by: pasash on Sep 2, 2009 3:43 AM
-
Hi I hope someone could help me on this I have a mac mini and today after I installed an software update(Missing Sync for Palm), after rebooting, the display resolution has changed, the symptoms are: 1. the screen becomes larger than the actual displ