Most frequent heartbeat failure report

hello,
I want to create a report, or a sql query that outputs the top 10 servers with heartbeat failures in the past xx days.
is there any native report in scom that does this, or a sql query that shows this?
thanks.

Thank you Jonathan. Point Noted. Can you please help me understand the difference it would make, so I could modify the other queries I use..
Regards,
Saravanan
That's a great question.
The first reason is that views may implement HINT options that the software developer deems necessary to preserved the integrity of the database and safeguard against lock conditions that may occur as opposed to ad-hoc table query with no HINT options. This
is the main reason I always use views whenever possible - it simplifies the query, because I don't need to remember to include these options in my SELECT statement.
Another reason is, the calls made from the application use views, so I figure I should too.
Views also sometimes simplify more complex statements joining multiple tables. This isn't necessarily the case for ManagedEntity vs vManagedEntity, but it's still a practice I apply even if the view is a "mirror" of the table.
For example, the vManagedEntity view includes the NOLOCK HINT option. If you lookup NOLOCK HINT practices, and when to use NOLOCK, it can get a little blurry in terms of impact on database performance. I just assume use the views that the vendor created, because
they understand where HINT's should be used better than me. Otherwise, I might be causing problems that I'm not even aware of, impacting application internal processes.
Borrowing from a
thread on StackOverflow:
"A view is an abstraction layer, and it does what any good abstraction layer does, including encapsulating the database schema and protecting you from the consequences of changing internal implementation details. It's an interface."
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Similar Messages

Frequent heartbeat failure alerts on the server

Hi Experts,
we are getting the heartbeat failure alert for xxxxxxx server. We have reinstalled the SCOM agent again on the server but still the alert is generating frequently
Server is hosted on Cloud and we have verified the server resource utilization (CPU, Memory & network ) for the server.The utilization is normal and not finding any packet drop/connectivity issue for the server with SCOM gateway server. Please suggest
on this issue.
Thanks in advance,
25aish

If the Windows agent is currently being monitored, and you have verified that by checking whether performance data is available (for example), then the best thing you can do is extend the heartbeat for that particular agent to something that is acceptable.
In this case, if you are using the default heartbeat settings (which is 3 minutes), then just override the agent setting in Administration to allow up to something like 9 minutes. I actually suggest this for all environments right out of the box, because 3
minutes is just way to aggressive. Check every 180 seconds, rather than the default 60 seconds...
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Heartbeat Failure - CallManager Offline

Hello,
I'm having a rather unusual issue with Cisco Agent Desktop that I hope somone could give me some insight on. First let me give you a little background. All users in the company, over 300, were on Windows XP SP3 using CAD 4.5.7.4. It was then decided to upgrade everyone to Windows 7. We knew CAD 4.5.7.4 would not be compatible with Windows 7. So intead of upgrading to most current version of CAD it was decided to try and get CAD 4.5.7.4 to work with Windows 7. The only way we were able to do this was install Windows XP Mode to every machine that needed CAD and use it from within the virtual machine.
This for the most part has worked great. Except some users, around 30-40, are getting a "Critical Error" message randomly with CAD that will log them out. When I look at the CAD logs I'm finding the same error, "Heartbeat Failure, CallManager Offline." What would be causing this heartbeat failure and how can I stop it?
I know this is outdated software, but we are unable to upgrade. If you have any ideas on what might be causing this please reply back. Thanks.
Phillip

bump

Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

Hi,
I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
Is there a way to change this?

SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
#Verify Failover for Agents reporting to MS1
$Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
$Agents | sort | foreach {
Write-Host "";
"Agent :: " + $_.Name;
"--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
$failoverServers = $_.getFailoverManagementServers();
foreach ($managementServer in $failoverServers) {
"--Failover MS :: " + ($managementServer.ComputerName);
Write-Host "";
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

In the new Firefox, I have no back button, no "most frequently visited" and there is no longer an option to save tabs when I close.

Many features have disappeared. There is no back button to go to the previous page. There is no "most frequently visited" icon on the toolbar. I am not asked if I want to save all my tabs when I close firefox. There is no recently bookmarked tab on the toolbar. Everything takes longer to get to. The tabs don't automatically stay open.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
Do you still have the Bookmarks Toolbar visible?
* [[Restore the default Smart Bookmarks Folders]]
Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
Make sure that you have the Bookmarks Toolbar and the Navigation Toolbar visible: "View > Toolbars"
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
* http://kb.mozillazine.org/Toolbar_customization

Monitoring Active Alerts shows critical heartbeat failure while server is working

details of the alert shows the reason is the computer can't be reached through an ICMP ping
if do a
ping servname
it uses the IPV6 and fails
Why isn't it using IPv4?
thanks
N
NM

Hi,
In the Tasks pane, under Health Service Watcher Tasks, click
Ping Computer. The task opens a dialog box to display its progress.
In addition, more details, please read the article below to troubleshoot heartbeat failure issue:
Resolving Heartbeat Alerts
https://technet.microsoft.com/en-us/library/hh212891.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

AIX Heartbeat Failure

Hi all,
I updated our SCOM 2012 SP1 servers to Update Roolup 4 (UR4). After the upgraded our AIX servers are shown in gray critical state with an alert Heartbeat failure in Active Alerts.
I tried the following to sort the issue, but none worked:
Successfully upgraded the agent through the console, it is shown as health for ~ 5 minutes and then back to Critical state with heartbeat failure.
Successfully uninstalled the agent and installed it again.
Reset the health for the server through the console.
The server can successfully telnet to port 1270, and I can execute winrm queries.
Any thoughts / suggestions?

At this point I would suggest you open a support case with Microsoft and someone can work directly with you to troubleshoot the issue. As why Solaris works and AIX does not is beyond the basic support we can provide on the forums.
Regards,
-Steve

False heartbeat failure error messages

Hello Everyone,
I am receiving false heartbeat failure error messages from all the agents in our environment.All servers are reachable and online at that time. The alerts get auto closed after 2-3 mins without any troubleshooting.
Can you please let me know how can i stop these alerts? We have configured alert emails so support team get notified of these alerts and they think something is wrong with the servers. We have two management servers and 70 agents in our environment.

Since you are receiving false heartbeat alerts for all the agents in your SCOM. There could either be a network problem on the MS servers or the agents. Check the event viewer for any network related errors or if their SCOM Health service keeps restarting
every few minutes. Check out for other errors too on the agents that might point to the cause of these alerts.
Alternatively you can increase the Heartbeat interval (default is 60 seconds) and/or the number of missed heartbeats (default is 3). If the issues get auto resolved then increasing these values to appropriate seconds and counts will not cause false
alerts for you.
Thanks, S K Agrawal

The Top10 most frequently asked questions and answers (FAQ) November 2008

Dear SAP Business One Community members,
We will provide you on a regular base the top10 most frequently asked questions together with the releated answers.
The Top10 from November:
1. Where do I find the Supported Platforms for SAP Business One?
Follow the path:
SAP Channel Partner Portal
=> SAP Business One Resources
=> Product Availability
=> Supported Platforms
[Quicklink|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000707728&_SCENARIO=01100035870000000183&_ADDINC=&_OBJECT=011000358700001241092005]
2. What is the Scope of Support for 3rd party addons for SAP Business One?
Any issue related to an third party addon, does not come under the purview of SAP support scope. Please refer to the [SAP Note 844036|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=844036] for SAP SDK support scope.
3. Which dot-matrix printers are supported in SAP Business One?
The three types of Dot Matrix printers which are supported are:
〇 Citizen PROdot 300
〇 Epson FX-880
〇 OKI MICROLINE 320 Elite
You can find this information also on the [Best-Practice System Setup and Sizing landing page|http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000706968&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700001077772007] or directly in the [SAP Business One System Requirements Guide|http://service.sap.com/sapidb/011000358700000310652008E.pdf]
4. How is check printing done in SAP Business One 2005 and 2007?
Please see therefore the following notes:
〇 [SAP Note 903135 Printing Procedures|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=903135]
〇 [SAP Note 1248534 - Cheque/Check Printing - skipping of cheque/check numbers|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1248534]
Please go also through this [EES session|http://service.sap.com/~sapidb/011000358700000326662008E]

5. What kind of picture files are supported in SAP Business One 2007 A?
As of SAP Business One 2007 A March patch, the supported formats in both the application and SDK for graphics are JPG, BMP, PNG and PCX. In a future release the Online Help is to be updated with this information.
Please see therefore the following note:
[SAP Note 1137796 - Approved picture formats JPG, BMP, PNG, PCX update help|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1137796]
6. How to know which field name related to which DB field name?
See therefore the [SAP Business One Help file|http://service.sap.com/~sapidb/011000358700000187612007] - Search: "System Information" (1 st entry )
The left-hand corner of the status bar displays field and error messages.
To display field position the cursor over a specific field and see that the field name and length appear. In addition, you can display for each field on a window. First, choose View --> System Information. Then, position the cursor over a field and see relevant to that field appears.
Different types of messages appear in the status bar.
7. How can I do a development request for SAP Business One?
If the request is about a non-legal issue please post your request in the [SAP Business One Product Development Collaboration forum|/community [original link is broken];. If the requested function covers a legal issue use the template from the note below.
Please see therefore the following note:
[SAP Note 1028874 - Missing Functionality / Product Development Collaboration|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1028874]
8. What is the scope of support for SDK (e.g. partner asked support to provide an example of code for an issue)?
SAP Business One Product Support will support issues where an issue is present due to an application error. However, in particular when it concerns any kind of customization, we would like to ask before logging any issue to support to locate the area where the issue occurs, i.e. in case of queries or SDK code to only send us the part of the code/query where the error appears or respectively a simplified sample of the code/query. The same applies for other customizations like PLD, XLReporter, etc.
See also [SAP Note 1012023|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1012023]
9. How do I do to block user access to TOOLS menu => User table?
define an additional authorization for the tables you would like to put restrictions on. So, please go to the
Administration -> System Initialization -> Authorizations -> Additional Authorization Creator
and then create an additional authorization by giving its Permission ID and Name, and specify the Form ID in the lower left part of the window (to find the Form ID you should set the Debug Information active under the View menu, and then hover your cursor over the form window, then you will see the Form ID at the bottom line of the SAP Business One window).
10. What is the scope of support for the demo DB?
Please note that for Demo DBs only reproducible bugs are being supported. There is no support for database corruptions, as Demo DBs are not meant for productive use and a clean Demo DB can be installed for testing purposes.
See also [SAP Note 1099700|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=1099700]

The Top10 most frequently asked questions and answers (FAQ) January 2009

Dear SAP Business One Community members,
We will provide you on a regular base the top10 most frequently asked questions together with the related answers.
The Top10 from January:
1. How to install SAP Clients?
According to the symptom, this issue can be caused by the missing "SQL Native client" component.
In this situation, please refer to [SAP Note 1015229|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028],to resolve the issue.
2. How to put sales order number on A/R invoice?
1. Create a UDF in A/R Invoice at Row Level.
2. Apply Formatted Search on this UDF.
3. Use the Below Query:
Select T0.DocNum From ORDR T0,RDR1 T1,DLN1 T2
Where T0.DocEntry = T1.DocEntry And
T1.DocEntry = T2.BaseEntry
And T2.DocEntry = $\[$38.45.0\]
4.Now you can get this UDF in the print layout(template).
3. How to know variable in Print Layout?
Variable can be retrieved checking System Information in view, however it is not supported
Please refer to the attached [SAP Note 723783|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028] - the use of system variables isn't supported as their definitions might change after upgrade.
Variable fields are not supported due to the following reasons:
1. Variable numbers might change after upgrading to a higher version.
2. The user can use variable numbers which are not linked to the document or form related to the document editing.
The list of variables is only supported for 2007 A version.
We do not have such kind of variables list for 2005 B version.
You can find the documentation of variables on Service Market Place in the following:
Go to the [Documentation Ressource Center|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000707558&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700002906862005E] ->2007 A Version->How to guide->How to use PLD variables file in 2007 A Version.

4. How to clear the SBOMailer queue?
As a workaround, please use dummy or wrong SMTP server and send all those mails to that address.
After sending those mail to dummy SMTP, you can see the mail status changed to "E" (Error), then after setting up the correct smtp mailer
would not try to send the mails with status "E".
5. How to use dialer in BP?
1.How does this work?
If you have Microsoft#s automatic phone dialer installed, you can press CTRL+TAB to automatically dial the numbers in the telephone fields.
2. Are there settings I can change? In the System Initialization - General Settings - Services, to place calls directly through SAP Business One if a phone system or modem is installed on your computer or in your network, in these fields specify the area code and the number to dial for an outside line.
3. How can I troubleshoot when this doesn't work? Try to check if the number is correct, the best way to check it is to use the MS Phone Dialer and to enter this number exactly as it is written in B1. If the dialer succeed dialing this number so B1 should succeed too, if the dialer failed check what is the problem with the number or with the Microsoft Phone Dialer.
6. Iu2019m unable to set exchange rate in credit note
To set an exchange rate in a Credit Note is only possible to if the credit note is not based on another document. In this case the exchange rate of the base document will be considered. Please see also SAP Notes [686224|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=686224] und [703028|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028]

How do I add most frequently called numbers

How do I add most frequently called numbers?
Thank you,
Marilyn

If you mean call favorites, open Phone, tap the Favorites button at the bottom, tap the plus sign at the top, choose the contact and number you want to add.

Top N most frequent words in a data set in Numbers

I have 3 columns of data in 10,000 rows and i would like to find out the top N most frequent words. I don't have a list of words before hand, rather i would like the algorithm/function to determine the top N most frequent words.
any help would be greatly appreciated.

naser,
This generally takes an extra columns
Here is an example that does what you wnat in a single table:
There are three sections:
1) Columns A and B: column A contains the list of words, column B lists the "ID" of each new word
2) Columns D, E, and F: column D contains the list of unique words, E contains the number of occurances of each word, and F contains a fancier ID (to make words with the same count have slightly different counts)
3) Columns H, I, and J: column H contains the ranked IDs from highest to lowest, column I contains the corresponding word, and column J contains the count for that word
B2=IF(ISBLANK(A2),"",IF(IFERROR(MATCH(A2,A$1:A1,0), 0)>0, "",MAX($B$1:B1)+1))
D2=IF((ROW()−1)>MAX(B),"",LOOKUP(ROW()−1, B, A)
E2=IF(D2="","",COUNTIF(A,D2))
F2=IF(E2="","", VALUE(E2&"."&ROW()−1))
H2=IF(F2="", "", LARGE(F, ROW()−1))
I2=LOOKUP(H2,F,D)
J2=LOOKUP(H2,F,E)
select B2 thru J2, copy,
select Columns B thru J
hold the command key and click B1, C1, D1, E1, F1, G1, H1, I1, J1 (to unselect them)
paste
To limit the number of words, make the following change:
G1 contains the number of words you want
H2=IF(OR(F2="" ,(ROW()−1)>$G$1), "", LARGE(F, ROW()−1))
select H2, copy,
select column H, then unselect H1
paste

Failure Report Generation

Dear All,
There is a sales process chain that runs daily that is scheduled to pull data from Oracle directly to BW. Due to wrong Billing document the pull fails at times. How is it possible to generate a mail or a failure report of data pull activity and send it to concerned party when the process chain fails? I have heard of a certain IT mail. Kindly share any info or docs on possible solution.
Regards,
Ratish
[email protected]

Hi,
Right click on the process for which u want to send message and in the context message u will have option to CREATE MESSAGE click on that then you will get option Messages for FAILURE , SUCCESS and both , then select which option need crete variantant and you will get the maintain Recipient list.
Thanks
Krishna Reddy.

Failure report

Ok, so I've had this problem in a while now. Here's the deal: When i try to open iTunes (on Windows XP Pro) it says something about sending a failure report. I've tried to re-install it many times, but it still won't open.
Does anyone have any idea on what to do?
Thanks in advance.

Is there an error report number? If so, that is important and you should repost with the number.
On the other hand, primarily with these kinds of things, it's because Quicktime is malfunctioning. Download the QT standalone to replace your current one here:
http://www.apple.com/quicktime/download/standalone.html.
Hope this helped. If not, post back
rjl

Most frequent heartbeat failure report

Similar Messages

Maybe you are looking for