7.1 SLD-LMBD. Advice needed: duplicated entries for SAP systems

Hi Experts,
I've noticed few duplicate entries that appear in SOLMAN 7.1 during the content synchronization from SLD to LMDB and migration from SMSY to LMDB.
For instance:
I already had CRM syetem in Solution Manager: CRD
After the SLD-SMSY-LMDB sync & mirgation new CRM system was created in SOLMAN: CRD00001. and it has absolutely the same setting and parameters as an old one: CRD.
This happens for other systems like: BW, XI, etc..
Any advice please how to avoid such duplications in the SOLMAN systems' landscape?
Thanks & regards,
123

Hi,
This normally happenes if there is some differences in the data in SMSY and SLD.
It may be any header data..Database host name ot any small entry.
Please check the below note:
1507548 - Duplicate SID in Transaction SMSY.
The solution can be, cleanup the duplicate entries manually and update the data properly. check if any thing missing in the SMSY definition.
Hope this helps.
Regards,
Sunny

Similar Messages

  • Create entry for remote system necessary?

    Hello,
    is it necessary to start in CEN transaction RZ21 u2192 Technical infrastructure u2192 Configure Central System u2192 Create entry for remote system.
    What is the result of this transaction and why is a <sid>adm user needed?
    Thanks

    Hello,
    I take you mean you have a JMS queue created in an Oracle database (A) and you want to propagate messages to a JMS queue create in an Oracle database (B)?
    If that is the case you use normal AQ propagation. You can follow <Note:102771.1> as an example changing the ADT as appropriate, etc.
    MGW is only to be used for Oracle to 3rd-party propagation.
    Thanks
    Peter

  • The download is for Windows.  I have MAC OS X 10.9.1.  I need a download for that system, please.

    The download is for Windows.  I have MAC OS X 10.9.1.  I need a download for that system, please.

    are you using the mac (not windows) serial number?
    if yes, http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

  • Advice needed on monitor for Photoshop and Lightroom use

    Hi. I am aserious amature photographer wishing to move to the next level and sell some of my work.
    I just had a custom pc built to work with the new copies of Photoshop CS5 and Lightroom 3 I bought (lots or RAM and HD space, ssd, etc....)
    The last piece of my system is to purchase a monitor. I want to be somewhere in the better then Best Buy but less than NEC/Eizo range in price, or between $500 - $900. I have worked with cameras since the early 80's and moved to digital several years ago but the only post processing I have done is with Photoshop Elements.  I would be doing mostly prints to sell but also need to have a web site to do so. Will also use the pc for daily net surfing... but do not game or watch a lot of video on the pc.
    Being really new to this whole process I have a few questions.
    The first thing I need to decide is whether I need to look for a wide gamut display or not.
    I realize the whole chain must be 10 bit (Adobe -OS - graphics driver - graphics card - display port.
    I have Adobe Photoshop CS5 and Lightroom 3, Win7 64 bit, Zotac ZT 50701 10M video card (which uses GeForce GTX 560  fermi and an nvidia chipset. It does have displayport). I am having a hard time determining whether my video card actually supports wide gamut (10bit).
    Standard vs Wide Gamut? Is wide gamut important enough to deal with the issues it brings (calibration, viewing things other than PS and LR or color managed, which appear to be rare?) Is sRGB good enough for most prints (don't do fine art, mostly nature and portraits but starting to do some HRD things). If wide gamut is the way to go I have no problem with that and have the time to learn about calibration, color management, etc... But I also want to make sure the juice is worth the squeeze.
    24" vs 27"? Is there any advantage to one or the other when editing photos?
    IPS vs PLS? I realize they are similar but are there differences worth noting?
    Glossy vs Matte Anti-Glare? seems to be a lot of comments regarding the anti-glare coating, mostly poor. Yet I can see issues using a glossy screen in my study with a window to my back.
    One manufacturer vs another? I realize Eizo, NEC and LaCie are at the top of the heap. But with my budget, after upgrading my pc and camera equipment, I can't make that work now. So I need to choose from the next group down (Dell, HP, Samsung, Asus...)
    One or two monitors? It looks like many (mid-grade) wide gamut monitors do a lousy job of displaying anything but color managed sites. Is that necessarily true of all the mid-grades? Or can some be used for graphics but as well for routine net surfing, MS Office, etc...? Or am I better off getting two monitors, one for graphics and one for the rest? That would pretty much limit me to 24" or less given my budget (used to using a Dell 21" TN monitor that oddly crapped out just as my new pc was done).
    The more I read reviews the more confusing it gets. There seems to be a difference of opinion even among pros on whether to go wide gamut or stick with an easier sRGB. Realizing a standard gamut monitor would be cheaper, I do want to make the right decision up front, given my budget.
    The one thing I have found astounding is that there is nowhere to actually see many of the monitors I am considering. We live in Nashville TN but my wife is from Atlanta Ga so we drove there a few weeks ago to visit family and for me to visit monitor shops. Even the largest ones there (Fry's and Microcenter) had minimal IPS monitors, a few Dells and HP's. The knowledge of their sales folks was so poor I finally gave up. Felt bad about this until I posted this on another board and got a reply from a guy in LA (second largest city in the US) that he wanted to see a particular monitor and there was no place even there to do so.
    Anyhow, here is what I have considered:
    24" Wide Gamut: Dell U2410 and Asus PA246Q. Dells appear to be good IF you get a good one. The Asus appears to be a clone of the Dell that gets a lot of good press.
    27" Wide Gamut: Dell U2711 that also gets a ton of good reviews
    24: Standard Gamut: Dell U2412 and HP ZR2440.
    27" Standard Gamut: Samsung S27A850D and Apple Cinema- The Samsung uses PLS technology versus IPS while the Apple is a glossy screen that will work with a pc.
    Sorry for the long post. Any comments are greatly appreciated.

    dkg62 wrote:
    I realize the whole chain must be 10 bit
    Not trying to talk you out of setting up a 10 bit pipeline, but it's still not very mature, and it really isn't a necessity to get a good editing experience.
    Personally I find advantage in using two 4:3 ratio monitors for Photoshop work.  All my panels are on the right monitor, while pretty much the entire left one shows the Photoshop main window and the working canvas space.  My desktop is 3200 x 1200 pixels overall, and I find having the panels remain visible all the time is important.
    Regarding whether a wide gamut is important...  Will you be printing to devices that deliver a wide gamut?  What other things will you be doing with your system?
    It's not a no-brainer whether a wider gamut monitor is always "better" for everything, since it can accentuate the differences between the output from color-managed and non-color-managed applications, and it's definitely true that not everything is color-managed.  With a monitor that's close to sRGB, for example, you might find Internet Explorer output acceptable, while using a wide gamut monitor will result in garishly oversaturated IE displays.  On the other hand, FireFox (with a settings tweak) seems to get color management right, so there is an alternative.
    I think, as John has implied above, you should work to get your head completely around how color-management works, soup to nuts.  If you don't, there will always be things that are a mystery or which surprise you at the wrong times.  Being able to order a print and have it come back with the expected color can be very important, as you might imagine.
    -Noel

  • Large RAC cluster advice needed - 16 nodes for 120,000 TPS?

    So we are doing some modeling on a system that we are getting ready to build. Our current estimate indicates we will need to plan for about 120K transactions per second. Another guy did the research and thinks we need to plan to have 16 nodes of IBM 3850s which will be 256 cores and about 256gigs of ram to support the TPS. This sounded a little over the top so I decided to do some of my own research and I found:
    http://www.oracle.com/us/corporate/press/018144
    And that indicates a HP with two Intel® Xeon® x5570 quad-core 2.93 GHz processors was able to do 10,529 TPS. This makes me feel like the hardware that was suggested (sixteen x3850s) is way overkill.
    Does anyone have any ideas or whitepapers on this sort of planning?
    Edited by: bolesj on May 7, 2009 10:42 AM

    Hi,
    Did u thought about using database machine (Oracle/Hp)?
    http://www.oracleracsig.org/pls/apex/f?p=105:206:3383923510465954::NO
    Or take o brief look on webseminar presented by Bohan Chen (Yahoo). He uses a RAC system with 16 nodes.
    http://www.oracleracsig.org/pls/apex/f?p=105:206:3383923510465954::NO
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • How to change transport entry for SAP Script

    Hi,
         I create a SAP Script form in $TMP and need to change dev. class and create transport entry for this one. But don't find option to do this.
    Cheers
    Senthil

    Hi,
    Use The Program SAPCTS_TOOLS.
    Then Click On Change Object Directory Entries Under Object Directory-->Enter FORM Under DTEL(DATA Element)
    Select The Check Box And Give The Object Name-->Execute.
    Click On the Form and Then Click On Object directory Button.
    Regards
    Sandipan

  • Do we need License Key for SAP IK

    HI,
      Do we need to request for  License Key of SAP Integration Kit and add in License Keys in CMC of BO EDGE 3.1.
      Early response is appreciated.
    Thanks,
    Bharath

    Hi Ingo,
    Thanks foy your reply.
    IS The License Key which we downloaded from Market Place is enough for SAP IK or do we need to Raise a request for New License Key For SAP IK
    Thanks,
    Bharath

  • SAPproxy - No Entry for "SAP Servers" in Server Explorer

    I have had to re-install the Developer Studio and the .Net connector 2.0. 
    Now I can select Project -> Add New Item -> SAP Connector
    The problem is there is no entry in the server explorer for "SAP Servers".  All I see is the "Servers" entry.
    At this point there is not a way for me to create proxies.
    thanks, Philip

    Hi,
    Click the little refresh button located on the top of the server explorer... (not the "right click" refresh).
    Hope it helped,
    Ofer

  • Satellite L450D - Need Wireless driver for Linux system

    Hi,
    I have a satellite L450D, with a Realtek RTL8191SE wireless card (windows 7). I use Linux for college and i can't get on the internet when i use linux cause the oporating system dose not find my wireless card.
    When i check from command line for wireless cards, it shows that there are non.
    I know other people that had this problem and basically i need a driver for it.
    Can any one let me know what driver i need or where to get it? I would really appriciate this as i need to use Linux for college.
    Thanks

    Hi
    I googled a little bit and found some tips in the internet.
    It seems that there is no Linux driver for Realtek WLan card rtl8191se and rtl8192se.
    Bu someone has managed the WLan installation by installing ndiswrapper from synaptic in Ubuntu + GUI. He downloaded the W2K driver net8192se.sys and net8192se.inf.
    The W2k driver work but the combination driver W2Kxp or the xp or vista doesnt work.
    After that you can use WPA because WEP encryption is not supported

  • Transports needed to import for SAP CRM2007 to connect to CrystalReports 08

    Hello Friends,
    I need to build a connection between Crystal & SAP CRM so in order to get what all transports i need to import to SAP CRM.
    Thanks
    Best Regards
    Swati

    Hi Swati,
    you can look at the Installation & Administration Guide for the SAP Integration Kit XI 3.1. The document is availabe on help.sap.com.
    There is a chapter called "Transports" in the appendix outlining the transports and the content of the ABAP transport.
    ingo

  • Help/advice Needed! Paid for 2 years with no servi...

    I have been with BT for 2 years since we moved into our first home, paying approx £40 a month for phone line and broadband! When we initially signed up we were asked various questions to see what product would be best for us, we told them we wouldn't be using phone line as we use our mobiles and would only use the wifi for childrens iPad! We were told to download BT app and log into wifi using email and password which we have done for 2 years! The wifi has always been very slow Nd hit and miss but we live in middle of no where so thought it was our area! After 2 years we have decided to start using home phone for childrens school purposes! So we bought phone, plugged it in and no dialling tone! Called BT who sent out engineer within a week! When engineer arrived he asked where is our hub? My response being whats a hub? After explaining how we usually connect to wifi he explained that that's not our wifi and a hotspot! So basically been paying for over 2 years never used land line or Internet due no fault of our own! We were never told about a hub or received one? The engineer told me to call and complain so which I did over 3 weeks ago! The advisor says he would fill in a form and pass on to his manager, but sent is a hub out which is charged us for? The hub has came and I still can't get any internet after spending another 2 hours on phone doing various tests they can't get it working and are sending out another engineer and was told could possibly be charged £129 for! As you can imagine I am furious with? I still haven't heard back from anyone and have sent a complaints form in also! Can anyone give me any advice on where I stand as I'm not very good with technology? Thanks

    Hi Emmaburke87,
    Welcome to the community forum. I'll be able to take a look at the details of your complaint. Please can you send me in your details using the "Contact The Mods" link found in my profile.
    Thanks
    PaddyB
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • URGENT ADVICE NEEDED!-  outputting for iTunes

    I have edited some promo videos for a small record company. They have asked me to supply them edited masters at highest quality to submit to iTunes for sale. They were shot in HDV. What should I give them? Full quality quick time movies? Compress for iPod within FCP? Welcome your advice!
    Thanks

    I think you best give them both. The smallest file size to post on the i-tunes store and the high quality uncompressed to provide to a client via ftp-server. Thats the way i do it.

  • Access amount charged to the supplier in AP. Need acounting entry for that.

    Hi All,
    In (R12) Acount Payble i have chagred some access amt. to the supplier in this
    case i need to raise debit memo or credit memo. do you have any idea
    example:- Payble Invice =298000
    Actual invoice price - 270000( I need to deduct TDS on this amt 270000) but
    i have deducted the TDS on service tax also.
    Service Tax -28000
    Means instaed of deducting the TDS on 270000. I have deducted on 298000.
    How can i rectify the enrty means need to pass debit memo or credit memo.
    Please help me on this

    Hi,
    The broker redirects the user based on the target provided by the Remote Desktop client, or if no target is provided it will redirect to the default collection if specified in the registry.  Each broker can only have one default collection. 
    When a user manually connects by entering the FQDN for the broker(s) in the Remote Desktop client and clicking Connect no target collection is sent (there is no place in the UI to specify it).
    There is no logic on the broker to examine the groups a user is a member of and based on that redirect them to a collection.  Your concept could work, but one thing to keep in mind is that users may have access to multiple collections and in that
    case there would be a need for a secondary user interface to ask the user what collection to connect to.
    If using RemoteApp and Desktop Connections (RADC) or RD Web Access to launch the connection is unacceptable in your environment then you would need to create a FQDN for each collection that points to that collection's RDSH servers using DNS RR or similar
    or distribute .rdp files to your users.
    I understand the simplicity when you only need a full desktop connection of users just opening Remote Desktop Connection, entering the server name, and clicking Connect.  When using RADC or RDWeb or other solution based on the webfeed you get the benefit
    of a more dynamic environment, the ability to change the options from the server, add/remove collections, etc.
    -TP

  • Need Transport route for two systems(Urgent)

    Hi All,
    I have configured everthing like configuring domain controller and added to to domain controller.
    Now i need to do below steps
    I have Development (client) and Quality(client) in same system and Production as separate server.
    I want to configure transport route from Development client to Quality client and from Quality client to Production Server.
    Development Server SID is DEV ( Dev Client 100 and Quality Client 140) and Production Server SID is PRD
    Transport route must be configured like below:
    DEV( Dev client 100) -> DEV (QAS client 140) -> PRD
    We are struck with this
    Best Regards,
    Pratyusha

    Hi Pratyusha,
    As far as configuring Development and Quality systems concern, in one system is not suggested. I think you are aware of this.
    However, I need some more information on your question like the operating systems which you are using in DEV/QAS and in PRD.
    First, configure the Domain Controller in either DEV/QAS or PRD.
    Irrespective of the OS, you need to maintain IP address along with the host name and fully qualified domain in the etc/hosts file.
    for example DEV/QAS system ip address is 172.16.23.14 and host name is abc007, then you need to make an entry in etc/hosts file at the OS level as follows.
    172.16.23.14 abc007 abc007.yourcompany.com
    where in abc007.yourcompany.com is the fully qualified domain name.
    Once you done this in both, DEV/QAS and PRD, systems, then configure 3 system landscape from STMS tcode in the other system which is not a Domain controller.
    I hope this is helpful. Getin touch if you have any more questions or doubts.
    Regards,
    Satish.
    Edited by: Satish Arram on Jul 31, 2008 2:06 PM

  • Need Inst guide for SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edi

    Hi All,
    I need this inst guide or at least I need to know how to extract these .tgz files.
    I appreciate your helps with points,
    Thanks

    Login into service.sap.com with your OSS user and you'll find all the installation guides in .pdf here: https://websmp106.sap-ag.de/installnw70
    Good luck,

Maybe you are looking for