704x480, 720x480 & 1080x1920 all in same project?  Can anyone help me?

I'm a preacher, with Premiere pro CS 5, a funeral in two days, and a family with footage at three different resolutions.  They'd like me to be able to zoom in on the 1080x1920, and be able to cut to the lower resolution footage.  They'd also like to be burned to a dvd for presentation at funeral and to go home with family members.  I'm at way out of my league even beginning to comprehend what size project to start with - and how to render it out afterward so that the quality is good enough.  Can anyone offer any suggestions?  Thanks and God bless!

Timothy 2:4, ESV
No soldier gets entangled in civilian pursuits,
since his aim is to please the one who enlisted him.
Matthew 19:26, ESV
But Jesus looked at them and said,
“With man this is impossible, but with God all things are possible."
hahahahahahahaha!!!

Similar Messages

  • I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?

    I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?

    Using the same Ethernet cable that is used to connect the modem to the AirPort Extreme, disconnect the Ethernet cable from the AirPort Extreme and connect it directly to your Mac as a test for 4-6 hours.
    Be sure to power off the modem for 5-10 minutes when you do this, so that it will associate with the new device that it "sees".
    Does the connection drop when you connect this way? If yes, then replace the Ethernet cable and run the test again for 4-6 hours.
    If the connection still drops, you likely have a defective modem or a line problem on the cable service....despite what the cable company might say.
    If the connection remains solid when you run the "test", then you know that the modem and Ethernet cable are working correctly.
    If you have performed a factory default reset on the AirPort Extreme a few times, and connection still drops, then you should take the AirPort to an Apple Store....if you have one near you..... to let them take a look, or contact Apple Support directly.
    http://www.apple.com/support/contact/

  • I just reset my apple ID password and now all the imap folders in Apple Mail are greyed out. I can see the contents, but I don't get whay the folders are all greyed out. Can anyone help?

    I just reset my apple ID password and now all the imap folders in Apple Mail are greyed out. I can see the contents, but I don't get whay the folders are all greyed out. Can anyone help? Sorry for the long title on this message...

    Assuming this is an iCloud mail account, sign out of iCloud in its preference pane, then sign back in with the new password.

  • Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

    gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

    paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday.  Thanks a million, take care. Robert.

  • When I try to open images I am getting this message: "The file "image.jpg" couldn't be opened because you don't have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

    When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.iBooksX
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I just got a new iMac yesterday. I connected my Itouch and it would appear I have lost all my songs! Can anyone help? This is my first Mac and I am very intimidated by it.I

    I just got a new iMac yesterday. I connected my Itouch and it would appear I have lost all my songs! Can anyone help? This is my first Mac and I am very intimidated by it.I

    How did you get your songs onto your iPod Touch?
    If purchase directly from iTunes you can download them again.
    If your iPod is synced to iTunes on a Windows PC, then, sync your iPod to that computer.
    If this is your first Mac, are you migrating from a Windows PC?
    You may be interested in Apple's support pages on switching to Mac from PC.
    http://www.apple.com/support/switch101/

  • I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
    if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
    on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
    let me know if this helps you..

  • Even after activating my computer, I cannot play all my music.  Can anyone help with this?

    After activating my computer,I am still unable to play all songs.  Can anyone help me?

    Were all your items musibc, movies, tv shows etc all bought through the same apple id. Sometimes you may need to authorise that computer with the additional apple id.

  • My ipod has a blank white screen. I have tried pressing home and power button at same time and a restore and its still the same. Can anyone help please

    Can anyone help me please? My ipod has a white screen that i cant get rid off. I have tried pressing home and power button at same time. I have tried a restore from itunes and its still the same. I cant even turn it off. Please someone help me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I cant send tiscali e-mails from my ipad2. All settings seem correct, can anyone help?

    Hi,
        I have tried setting up my Tiscali account on my Ipad2. I have spoken to a TalkTalk advisor who talked me through the set up. To test the settings she asked me send myself a mail (ipad to laptop and vice versa). This worked, however, I tried sending a friend a mail and she did not receive anything. This is starting to annoy me now.
    Can anyone suggest anything that I could try?

    Is there a copy of the email you sent to your friend in the SENT folder? Did you receive a copy of it in your INBOX? You should if you have it set up to do that - Settings, Mail.... always Bcc myself.
    Try sending another email to someone else eg., [email protected]

  • Doing a project, can anyone help ? ? ? ?

    Hi guys im new to Actionscript only know the real real basics, and i wanted to do a project that would involve the community of Adobe.
    I want to make Ipad game or something along the IOS platform in under the trial limit, as a charitable event type thing. Everything i do will be recorded and with the final product it would be free or paid but if paid money would be donated to charity.
    But i need the help of people like you; the experts... So i basically need to know if people from this forum, and a few others on the adobe website (asctionscript one) if they are willing to help me on the game? please leave your responses letting me know or if i need to ask for help somewhere else.

    Hi Kirby.
    Thank you.
    One thing I am missing though is why for one single image I would have one name for a master and one name for a version if I am looking at an image in a Project. I mean, if these two are different for any image in a Project - does this implies that there is also a Version in an Album? Similarly does the lack of a listing in the Version column imply that there is no Version in an Album? If I am in a Project and I see this (two different names for each) can I tell from any data in the Project where the Version resides?
    Is there a proper way to rename both if i want them to have the same name? I mean, I have been renaming some in the Album and sort of naively thought that this would track back to the Master in the Project but I guess it doesn't? And similarly renaming a Master does not rename the Version? Is there a method for renaming both at the same time that is easy?
    Lastly, is the Batch Change for /multiple/ different Images? I mean, I am used to using File Mangler and this allows me to rename a huge number of images by just putting in what I want to remove or pre-pend or append. Is this same functionality in Batch Change?
    Thanks!

  • So i can't get my creative cloud window to open. is anyone else experiencing the same thing. i tried to download the software again but it still does the same thing. can anyone help?

    Trying to figure out how to get my creative cloud pop-up window to open up for me on command. Last night I kept getting the busy icon and today it won't even open for me. How can I fix this issue?

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • HT204150 The latest apple update erased all my contacts! Can anyone help me please?

    The latest apple update erased all my contacts

    I tried to restore from back up but this was the first time I connected my phone to my computer so when I ran backup my contacts did not return.  When I go to mobileme.com my calandar shows up but not my contacts.  I could cry. 

  • My iCloud doesn't load on all devices anymore. Can anyone help?

    I use to be able to log into iCloud and view my photos on my iPhone, iPad and PC but now. I can only see my photos on the device I took the photo from. If I take a pic with my iPhone then try to view it on my iPad it doesn't load anymore. I hate this. Things were so much easier when I just had to long into my iCloud. Help please.

        1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        2.    Photostream only syncs when the camera app is closed, ensure it is closed.
        3.    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • Lost all my contacts!  Can anyone help me get them back.

    I recently bought my first iphone 4s.  I just tried to sync it with my itunes and also set up icloud (really don't know what it is) and suddendly my contacts are gone.  Please help!!!!

    I tried to restore from back up but this was the first time I connected my phone to my computer so when I ran backup my contacts did not return.  When I go to mobileme.com my calandar shows up but not my contacts.  I could cry. 

Maybe you are looking for