7200 vs 5400 Hard Drive Speed Tests?

Does anyone know of anywhere online where they do a speed test of 7200 vs 5400 laptop hard drives? I wonder how much (if any) of a difference there is. I will be doing graphics work but just wonder if there is much a performance increase between the 100GB 7200 drive and the 120GB 5400 drive. The extra 20GB of space would be nice to have, but if there is a big performance boost, I'd take the 7200 drive. The RAM on this laptop would be maxed out at 2GB as well.

I heard that the differences were pretty drastic. I would not hesitate, but then again it depends what you do with your computer. If it's just for iTunes and co.. might be better to get the extra GB's. If you're more into working, doing stuff as fast as possible, games and other heavy stuff go for the faster one.

Similar Messages

  • How does hard drive speed impact iMovie performance

    I'm thinking of getting one of the newly released 15" MacBook pro laptops. For hard drive choices I can get 750GB @ 5400 RPM or 500GB @ 7200 RPM (SSD Drives are too expensive for me). How does hard drive speed impact iMovie performance?

    Most of my videos are .mov. Currently I'm using a ContourGPS and it saves the files as .mov H264 and iMovie converts it. It think it's uncompressing the file using Apple Intermediate codec, the extension is still .mov after the iMovie conversion.

  • 12" 1.33Ghz iBook Hard Drive speed?

    hey all,
    i'm curious to know if any of you have ended up w/ 5400rpm drives in your 12" 1.33Ghz iBooks. i know of a couple ppl on a diff forum who got stock iBooks and for whatever reason they got 5400rpm 40GB drives. offhand i know there's very little price difference between the 4200 and 5400 drives, so maybe apple is just streamlining their supply line? i'm just wondering if this drive speed is common for the latest revision of the 12" iBooks even tho it isn't something they advertise on the iBook page.
    thanks

    The hard drive is not a user-installable part. You would void your warranty or AppleCare Protection Plan to open the iBook and install a drive yourself. Since you can't buy a bare hard drive from Apple, they won't install one you've purchased somewhere else. An Apple Authorized Service Provider could install a new hard drive for you, though, without voiding your warranty.
    Apple buys hard drives on the open market. If the 4,200RPM drives become constrained, they may find some 5,400RPM drives for a good price and install those for a while. Since the hard drive speed is not specified at the online Apple store, the included component can vary.
    I would ask you why, exactly, you would consider the increased cost to upgrade a hard drive like this? I can edit DV and author DVDs with the 80GB 4,200RPM drive in my 1GHz G4 PowerBook. I've NEVER had an issue with my hard drive doing these kinds of operations. You should have a very good user experience with your 4,200RPM hard drive.
    -Doug

  • Hard drive stress test?

    Does anyone know of a hard drive stress test for Mac? I've been all over google and discussions but haven't found anything useful... Things that are suggested elsewhere that I don't want:
    -Zipping/Unzipping files, copying 3GB file etc
    -Benchmarks like Xbench
    -Opening 50 applications at once etc
    -Apple Hardware Test
    Thanks!

    Have you looked at Intech Speed Tools ?

  • How do you confirm the hard drive speed

    I am trying to confirm my hard drive speed.  I have looked at "about this mac" but can't seem to find it.  New MBP 15 inch running Lion

    found it.
    About this mac, more info, system report, serial-ATA, then scroll down to the nformation about the apple HDD, and there it is under "rotational rate"

  • Hard Drive Speed Difference Between FireWire 800 and Internal Drive

    Right now I have my entire 1.5 TB Lightroom photo library on an external drive connected to my new Mac Pro via FireWire 800. Will I experience dramatic or even noticeable speed improvements if I move this drive to one of the internal SATA hard drive bays in my Mac Pro?
    I would likely buy a new drive and SuperDuper the external to this new drive I put in the Mac Pro.
    Thanks,
    Matt

    SATA II 3Gb is only the controller bus and has almost nothing to do with actual individual drive speed. Confusing the bus interface with hard drive speeds is not a clear way to compare.
    Just pull the drive out of the FW case is all you probably need to do. Actual FW800 is less than 80MB/sec and more like 72-75MB/sec - which is as slow as your hdd gets from slow inner tracks.
    Other than green, most 1.5TB drives average minimum 75MB/sec to max 115 with average in mid-90s. And the first 1/2 of a drive is where best performance comes from.
    The size of the data and media library, amont of free space, all play a role.
    I think FW should be left to backups, an alternate boot volume, off line data.
    If it was Aperture library, but otherwise SSD is not realistic or viable. Nobody uses RAM disks as they are inefficient.
    I still find 10K VelociRaptor ($279 / 600GB) fast, smoother, more responsive, great for system and data drives, even if they are only 135MB/sec, or about what some of your 2TB drives can offer.
    QUICK TAKES - A striped pair of Velociraptor 600G 10K HDDs matches the speed of one SSD. For less that the price of one 256G SSD, you can buy two 10K 600G Velociraptor HDDs. If you stripe them (RAID 0), you get the same sustained transfer speed as the SSD. http://www.barefeats.com/quick.html
    If you are not already using all the internal drive bays, just nice to have them handy before going external. Also take a look at two other articles on Barefeats:
    THINK INSIDE THE BOX: Internal Storage Innovations for the Mac ProOctober 6th, 2010
    EXTERNAL STORAGE INNOVATIONS for Mac Pros -- (Added results for ATTO R680 SAS RAID adapter.)

  • External hard drive speed for backups and archiving

    I'm planning to buy a pair of external FireWire hard drives to backup and archive my iBook G4. I've read a couple of product reports that compare read and write speed of hard drives which seems to be a function of each drive's rotational speed.
    I then noticed that my iBook's internal hard drive is slower (at 4200 RPM) than either of the external drives I'm now considering (7200 RPM and 5400 RPM). A test report I read showed the 7200 RPM drive duplicating 1GB twice as fast as the 5400 RPM drive when connected via FireWire to a G5.
    Will my slower internal hard drive limit the speed of duplication so that there is little or no advantage to the 7200 RPM drive over the 5400 RPM drive for me?
    iBook G4   Mac OS X (10.4.8)  

    Probably should have been clearer in my initial question. The 7200 RPM drive I'm looking at is a desktop model, and a bit cheaper than the 5400 RPM drive, which is portable. I like the smaller footprint of the portable drive (and the convenience of it being bus powered) but don't want to pay more for those benefits only to be disappointed with its performance.
    So, I'm actually trying to decide between a higher speed/lower cost/desktop vs. lower speed/higher cost/portable. If I could determine that the actual performance difference between these was not very significant when used solely to backup and archive my iBook, I'd gladly pay a bit more for the convenience and small size of the portable.
    If there indeed is a big performance difference, I'd find space on my desk for the desktop drive and pocket the savings.

  • Portable Hard Drive Speed

    I know that it's advisable to use a 7200 rpm drive when editing but just to transfer a file to another computer, would a 5400 rpm drive be suitable? A portable I'm looking at has a 500GB capacity but operates at only 5400 rpm and I'd like to confirm it would work for video file transfer.

    If all you need is to transfer data or store via the external drive, then you don't need a fast drive. If you are using a USB enclosure then you definitely don't need a fast drive. Use the 5400 RPM drive instead. As long as you aren't trying to stream video from a portable drive you don't need a speed demon.

  • Non-Server Hard drive speed ?

    I'm looking at one of the new Mac-Minis, and the server version is listed as having dual 500GB 7200 RPM drives.
    However, the non-server version only lists 320GB or 500GB SATA drives, with no speed listed. I've looked at a display model and have seen that the 320GB drive is 5400 RPM. Is the 500GB drive 5400 RPM as well, or 7200 RPM?
    Thanks, Chris

    Now I see it, thank you.
    The standard Mac Mini comes with 5400 RPM drives, while the Server edition comes with 7200 RPM drives.
    As long as you're not needing a built-in Superdrive, the server edition sounds like a better deal, factoring in the increased rotational speed and drive capacity.
    Thanks!

  • 7200 rpm replacement hard drives

    Is anyone else having issues after installing a 7200 rpm hard drive? I bought the Western Digital 320GB Scorpio black, it seems to be working perfectly except it vibrates... It's just enough that you can tell its vibrating right under your hands when typing. Anyone else have a similar issue? I am thinking it may be the drive, but I'm not 100% sure...

    Yep. Great suggestion, it was after I installed it the first time and had it put back together, is when I noticed it. I figured that the rubber dampers might be off so I opened it back up and re-checked it. The dampers were in right, but I did notice that if I loosened them a little, (instead of screwed in snugly) it put enough pressure on the sides of the mount bay that it reduced the vibration some. After all of that the vibration is still noticeable. I am wondering if anyone else has had a similar issue and if so was it with a 7200 rpm drive? The one that came with the MBP was 5400 rpm and it didn't seem to vibrate at all.
    Could the drive be bad? I hate to send it back if there is nothing wrong with it, I hope I am not missing something here.

  • Mini Hard Drive Speed

    Does anyone know the speed (RPM) of the stock drives in the Mini? I'm guessing 5400 but want to make sure.
    Thanks.

    One way is to run the Disk Utility application
    to get the model number of your hard drive.
    You can then google for it and get the spec
    on the net.
    Jim

  • Flash Drive Speed Test?

    Any one that has a new MBA, could any one try the AJA disk speed test application on it to see what the drive read and write speeds are?
    Cheers

    Running QuickBench's small random test, I average the 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, and 1024K random reads and writes.
    RESULTS for the 128G Flash Storage on the 11" MacBook Air:
    Random Read Avg = 96 MB/Sec
    Random Write Avg = 94 MB/Sec
    RESULTS for the 256G Flash Storage on the 13" MacBook Air:
    Random Read Avg = 96 MB/Sec
    Random Write Avg = 93 MB/Sec
    RESULTS for other drives in a MacBook Pro:
    The Seagate Momentus 7200.4 notebook HDD = 17MB/s READ, 22MB/s WRITE
    The OWC Mercury Extreme SSD = 149MB/s READ, 139MB/s WRITE
    The Apple SSD = 100MB/s READ, 88MB/s WRITE.
    Message was edited by: rob_ART

  • 10.5.8 Both hard drives OK, tested - will not boot past startup screen

    Okay, I have an early 2008 MacPro, and everything has been running fine, but I was trying to search for something in Finder, and it wouldn't show up, so I checked my other hard drive's permission options - it displayed "Custom" for all users, when I know I had them all set to "Read & Write" previously, so i changed my main user's (on my newer HD on 10.5.8) permission to Read & Write on the original HD with 10.6.8, so I could search its contents, then these error messages poppped up, everytime i hit OK, a new one popped up immediately in its place, with some "Apple AUD" OR "HD" messages (can't remember the exact messsages), so I restarted my computer and now I cannot get past the apple logo screen.
    - Attempted selecting both hard drives as startup discs and still hangs at the white apple logo screen.
    - I tried booting into Safe Mode and it loads the status bar, and when it's done loading, it simply goes back to the spinning gear.
    - Tried booting from my 10.5.8  installation disc and it works, both of my HD's tested "OK" when I verified them.
    - Tried resetting PRAM, and even reset SMC, and the problem persists.
    One last note: the original HD that came with my Mac Pro, which has 10.6.8 on it as of last year, has a tiny lock icon on the left of the little hard drive graphic.
    I'm stressed because I use LOGIC a lot, and I have all of my music projects on these hard drives, and over a million files between both of them. I'd pull my hair out, if I hadn't just shaved my head for summer
    Any help would be GREATLY appreciated!

    Your hard drives may be OK, but the installed systems are not. You need to reinstall OS X on your startup volume. Doing this with Leopard requires your Leopard DVD:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Can G4 PowerMac MDD take advantage of SATA II hard drive speed?

    A PowerMac G4 MDD has 33Mhz PCI slots and a 167Mhz bus -- correct? Can this architecture take full advantage of a PCI SATA II controller card (if it exists for a Mac) and a connected SATA II hard drive w. 16mb cache operating at 3Gb/s? Or even a 1.5Gb/s SATA I drive? Thanks.

    Hi-
    Or am I trying to cram a V8 Hemi engine into my Mini Cooper, but just hooking it up to my 4-spark plug ignition system to run it on four cylinders?
    Aw, you outa get at least 6 cylinders worth out of it...and it will be one mean Mini C!
    The SATA won't run at it's potential, there is no doubt. But, you will see performance increases over the ATA drives, this is for sure..
    In my Sawtooth, after I installed the SATA drives, the speed increase was palpable. The SATA drives have better performance characteristics than ATA, and even without full data transfer rates, the increase in bandwidth, the speed of the drives, and the increase in cache definitely help performance.
    As for the question of SATA vs. SATA II, SATA II drives are all backward compatible to earlier SATA standard, so there is no reason to "limit" yourself to early SATA. Most all controllers are SATA II standard, and the SATA II drives are the latest in technology, and give the greatest benefit.
    I would recommend the Firmtek Seritek line of controllers. Bootable, and reliable.

  • Please help me arrange my hard drive setup, testing out different Raid arrays.

    Hi folks! If I could bother you for your time to help me figure out what the best options are for my computer setup that would be much appreciated!! I'm editing mostly RED footage so 5K and 4K files.
    Here's what my computer build is right now:
    Asus Rampage IV Extreme
    i7-3930K CPU (OC'd to 4.4ghz)
    64GB ram
    GTX 680 video card (2GB model)
    Windows 7 Pro
    Mostly Premiere CS6 and After Effects
    Here's the fun part and the part that I'm still baffled by regardless of how many videos and searches I've done online, what to do with my hard drives!?
    Right now I have my Mobo setup in Raid mode with these plugged in to the motherboard;
    2 x 250gb Samsung pro SSD's on 6gb/s ports (Raid 0) (Windows 7 OS)
    2 x 300gb WD Velociraptors 3gb/s ports (Raid 0) (empty)
    3 Ware 9750-8i Raid controller +
    8 x 3TB Seagate Barracuda drives ready to rock and roll.
    Now based on everything I've read, I'm leaning towards setting up 4 x 3TB drives in Raid0 for my footage (making constant backups with synctoy onto an external Drobo)
    4 x 3TB drives in Raid0 for exporting footage. (with continuous backups)
    That leaves me wondering where's the best place to setup Media cache, cache files and project files and anything else. Also I've left the OS pagefile on the SSD's but wondering if I should set that up somewhere else?
    Using Crystal Disk mark, I'm getting these results so far:
    OS on Samsung Pro SSD's in Raid0
    The 4 x 3TB drives in various Raid setups:
    Raid0
    Raid5
    Raid10
    Velociraptors in Raid0
    All this is due to many months of recent work on a computer build that would get bogged down and editing became painfully slow. I'm trying out a proper dedicated Raid card instead of just 2 drives in Raid0 off the motherboard hoping this will make a big difference.
    Any expert advice on here would be greatly appreciated!!!!

    Let's start with the easy part:
    C: SSD for OS, programs & pagefile
    D: 2 x Veliciraptor in raid0 for media cache and previews
    With 8 disks available on the 3Ware controller you can go many different directions and they depend on your workflow. Let me give two extreme examples and then you may be pointed in the right correction for your editing practice.
    Workflow consists of quick and dirty editing, usually one day or less and multiple export formats each day (example Vimeo, YouTube, BDR, DVD and web), or
    Workflow consists of extensive editing, usually a week or longer and exports to a few formats at the end of the editing (example BDR and DVD only).
    If your typical workflow looks like 1, your idea of two 4x raid0 arrays can work, because the load is rather nicely distributed over the two arrays. Of course the drawback is that there is no redundancy so you depend very much on the backups to your Drobo and restoring data after data loss can be time consuming, coming from the Drobo.
    If your workflow looks more like 2, then you can consider one 7x raid5 array for projects and media and a single drive for exports. That means that your raid5 will be noticeably faster then either of the 4x raid0 arrays you considered and offer redundancy as well. As a rough rule of thumb, a 4x disk raid0 will be almost 4 times faster than a single disk, a 7x raid5 will be around 5 - 5.5 times faster than a single disk. You profit from the extra speed during the whole editing week or longer.
    The export to a single disk may be somewhat slower, but how long does it take to write say 25 GB to a single disk? Around 160 seconds. If you use a hot swappable drive cage, you can even use multiple export disks, say one for Client A, another one for Client B, etc. In your initial idea of a 4x raid0 that time may be 40 seconds, so you gain around 2 minutes on the export, but lose that in the whole editing week.
    Just my $ 0.02

Maybe you are looking for