7960 local 4-digit extension
Hello all,
I am running a VoIP lab and have cisco 7960g configured and working well making outbound and inbound calls plus v-mail, except that I need to configure a 4-digit dialplan in the dialplan.xml file to be able to call other extensions. The current dialplan looks as follows:
<DIALTEMPLATE>
<TEMPLATE MATCH="#..." Timeout="5" User="Phone" />
<TEMPLATE MATCH="#..." Timeout="5" User="Phone" />
<TEMPLATE MATCH="0" Timeout="1" User="Phone"/> <!-- Local operator-->
<TEMPLATE MATCH="9,011*" Timeout="6" User="Phone"/> <!-- International calls-->
<TEMPLATE MATCH="9,0" Timeout="2" User="Phone"/> <!-- PSTN Operator-->
<TEMPLATE MATCH="9,11" Timeout="0" User="Phone" Rewrite="9911"/> <!-- Emergency-->
<TEMPLATE MATCH="w!" Timeout="1" User="PHONE" Rewrite="9911"/> <!-- 911 when entered in Alpha mode -->
<TEMPLATE MATCH="9,.11" Timeout="0" User="Phone"/> <!-- Service numbers -->
<TEMPLATE MATCH="9,101..............." Timeout="0" User="Phone"/> <!-- Long Distance Service-->
<TEMPLATE MATCH="9,10.............." Timeout="0" User="Phone"/> <!-- Long Distance Service-->
<TEMPLATE MATCH="9,10*" Timeout="6" User="Phone"/> <!-- Long Distance Service-->
<TEMPLATE MATCH="9,1.........." Timeout="0" User="Phone"/> <!-- Long Distance -->
<TEMPLATE MATCH="9,......." Timeout="0" User="Phone"/> <!-- Local numbers -->
<TEMPLATE MATCH="*" Timeout="5"/> <!-- Anything else -->
</DIALTEMPLATE>
The Cisco IOS command dialplan-pattern contains a new keyword, extension-pattern, to allow additional manipulation of IP-phone abbreviated extension number prefix digits. When this keyword and its arguments are used, the leading digits of an extension pattern are stripped and replaced by the corresponding leading digits of the dial-plan pattern. This command can be used to avoid direct inward dial (DID) numbers like 408-555-0001 resulting in four-digit extensions such as 0001.
Similar Messages
-
Hey Folks,
I am working on a desktop application and as part of that applications install, if we detect that firefox is installed, we want to install an extension we wrote. For the firefox upgrade urls to work in the future we seem to need to install the plugin as a local plugin. Therefore the following does not work:
firefox.exe -install-global-extension extension.xpi
My question is, what is the correct way to install this plugin as a local extension for the current user?
If this is not possible and we have to install our plugin as a global extension as show above, we run in to the following problem.
1. Let's say firefox 3.6 is installed and we install our extension as a global extension, it works fine
2. Now, The user updates to firefox 4, it detects our plugin needs an update to work with firefox 4
3. The firefox update code runs into an error when trying to update the global extension. We get a very generic error saying there was a problem updating the addin.
I should also note that for reasons not important to this thread we have to host the extension on our own servers and not as part of mozilla.The command line switch -install-global-extension is no longer supported in Firefox 4.
*https://developer.mozilla.org/en/Command_Line_Options
*https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry
*https://developer.mozilla.org/En/Developer_Guide/Customizing_Firefox -
Text messaging app keeps adding a "1" to the front of LOCAL 10 digit phone numbers.
this generates an error message. Local calls require 10 digits in this area code.
Sorry I didn't get back sooner. I've been sick with the flu.
As for the screen shot.... no. It would have the number of the person I was texting and I'm not going to post that online.
I've tried two different people and the results are always the same. Telephone function works, I can make and receive calls by selecting that contact. 3G data works, I can browse web. The contact is stored on the sim card. The carrier is net10 (who in this case uses ATT). The same card and contact work fine with my old phone, an LG optimus one.
However when I select a contact and press the text symbol I get the following message. (with “x” substituted for the phone number):
“1xxxxxxxxxx error invalid number. Please resend using a valid 10 digit mobile number or valid short code.”
Of course that 10 digit number work fine if it is a phone call so it is a valid number
Because the number of people in our area code is so large, all local phone calls use 10 digits.
I even upgraded to version v1.0.0B02 no positive effect. -
Store data on local disk from extension panel
Hi,
I'm trying to write an extension to InDesign and I use the following code to store a simple string in the encrypted data store that is available in Air:
var hostnameBytes:ByteArray = new ByteArray();
hostnameBytes.writeUTF("http://www.google.com");
EncryptedLocalStore.setItem("hostname", hostnameBytes);
Then, I use the following code to retrieve the data from storage:
storedValue = EncryptedLocalStore.getItem("hostname");
if (storedValue != null)
serverName = storedValue.readUTFBytes(storedValue.length);
However, the above does not work within the context of the extension. Do we have access to the encrypted data store in the extensions? Is there anything else that I need to do to get this to work?
Thanks,
BulentHi Jey,
Thanks for your prompt replay.
Unfortunately, Iu2019ve tried both your suggestions without success. Smartforms behaves just like in case of GUI_DOWNLOAD. There is no file saved on disk.
Do you have any other idea?
BR,
Baske -
dear all
this is regarding the problem i am facing at one of my customer in india for dial back up configuration using
PSTN line. Following are the list on components used for the configuration
1- 3745 router
2- NM-16AMV2
3- NM-DM30
The PSTN Line terminated on the router are extension served from the EPBAX. In my testing scenario i am trying to initiate callback using local 4 digit extension. Callin is working fine in same scenario.
Pls refer the attachment for the configuration for the same; int async41 i have configured for ppp callback and int fastethernet0/1.40 for testing purpose.
i tried using both ppp callback initiate/accept command to initiate callback. ppp callback accept is used to mscb Microsoft Callback client and ppp callback initiate is used for rfc 1570 compliant client.
During my testing i am able to authenticate the user, as verified form debug output for ppp, but dialup screen on window doesnt proceed further. During this time my int async 41 remains up and the client is unable to obtains any ip address from router as IPCP negotiation phase times out. and then line async 41 remains up indefinently untill i cancel the username and password verifying screen form the windows client.
The chat scripts applied to the interface are no executed either. And their is no option to configure this command script modem-off-hook offhook
which i think is necessary to to take the line offhook so that the router can execute other chat script to initiate call back.
i am attaching the debug output generted for the same, following debugs have been captured
General OS:
Modem control/process activation debugging is on
PPP:
PPP authentication debugging is on
PPP protocol errors debugging is on
PPP protocol negotiation debugging is on
PPP packet display debugging is on
Chat Scripts:
Chat scripts activity debugging is on
Callback:
Callback activity debugging is onHello,
I have made some amendments to your configuration, marked with --> (applies to interface Async41 only), can you test this with Async41, and check if it makes a difference ?
Regards,
GP -
Set Locale ID extension for Dreamweaver 8
Is anyone aware of an alternative for the Set Locale ID server extension by Jason Parker as it returns an "Invalid Extension" when attempting to download it.
Using ASP pages with Access database which has suddenly started to reformat the date from an input form to the US format of mm/dd/yyyy instead of the programmed dd/mm/yyyy format. The error does not occur when the database is run locally, only when via the web server which makes me think that although the locale on the web server shows the UK locale of 2057 I need to add a server script to my ASP pages to ensure the dates are indeed in UK format.While hopefully one of our Add-ons community members may know the answer you will probably have better luck posting your question on the Dreamweaver forum as Add-ons is focussed on CS6 and up.
I hope you are able to find a solution.
Best,
Jonathan -
An extension number for internal communication
dear sir,
We have both same ip addressing iptel network in 2 company but different did numbering . Company A with 111XXXX and company B with 222XXXX. Any one have any idea how to create an extension number for both company to communicate?
Thanks.You can set everyone up on a 4 digit dialing plan since you have non-overlapping DIDs. Then setup a Translation pattern for each side.
Company A's DID are 444-2000-2999
Company B's DID are 444-3000-3999
In Company's A CCM, setup a Translation Pattern for 3xxx ---->94443xxx So when company A dials 3xxx, it automatically prepends the 3xxx with the outside line and the local exchange to the DID. It creates the "sense" of a 4 digit extensions between two seperate sites.
In Company's B CCM, do the same Translation pattern, but setup 2xxx ----->94442xxx This should help you create one number then.
Does this help? -
How do I add an extension to a phone number in Contacts 7.1?
Now that the perfectly servicable Address Book has been replaced by overly complicated Contacts 7.1 in OS 10.8.3, I cannot add an extention to a telephone number. A phone number with an extention ends up looking like "4155551234ext3710484". Creating a new field named "ext" doesn't help, as any number entered into this field that is longer than 3 digits is autoformated to a phone number. Some of my contacts now have 6 digit extensions!
Contacts Help is no help whatsoever. Very frustrating.From what I read, using a comma to separate the main number from the extension should work. It inserts a pause, with each additional comma increasing the length of the pause. So:
4155551234,,3710484
might be long enough for the automated system to pick up and reach the point where it'll accept the extension number. If not, add more commas.
Commas will also sync to your iPhone if you have one, and work as intended. -
Unity Express 8.6 - "if you know your party's extension"
Up until now if this was needed I've simply had a "press 9" option and kicked the call over to the built-in dial-by-name script in CUE. Is there a way to have it monitor for "dial it at any time" the way Unity Connection has? I'd like for a user to be able to enter a 4-digit extension at any time during the prompt to be transferred to that extension while still maintaining the 0-9 options for those who don't know the extension they need.
I've used that to allow people to dial extensions and be redirected before but will that allow me to have 9 options within that dial-by-name menu while still monitoring for 4-digit extensions that begin with a 1-9?
-
Assign user extension starting with 9
we currently have 3 digit extensions for our users and we are running low on them. We currently dial 9 to get an outside line, is there a way for me to assign users an extension starting with 9 without having to wait for the timeout or press #?
As long as there is overlapping, you'll have to wait for IDT to expire or press # to place the call, using the same digit you use for PSTN calls internally is a very poor choice.
I assume you're already having to use the 9xx range, you'd be better off doing a re-design of your dial plan and expand to 4+ digits as required. -
Compiling gettext extension for mod_php
On this thread:
http://discussions.apple.com/thread.jspa?messageID=10106396
pterobyte listed some great instructions for downloading and recompiling the gettext extension for PHP. That's exactly what I need, so I followed the instructions and was able to compile and install the extension. However, when I restart Apache, the following not-so-helpful message appears in Apache's error_log:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/gettext.so' - dlopen(/usr/lib/php/extensions/no-debug-non-zts-20090626/gettext.so, 9): image not found in Unknown on line 0
If I examine the .so with file, it seems to be exactly what's expected:
% file /usr/local/lib/php/extensions/no-debug-non-zts-20060613/gettext.so
/usr/local/lib/php/extensions/no-debug-non-zts-20060613/gettext.so: Mach-O universal binary with 2 architectures
/usr/local/lib/php/extensions/no-debug-non-zts-20060613/gettext.so (for architecture i386): Mach-O bundle i386
/usr/local/lib/php/extensions/no-debug-non-zts-20060613/gettext.so (for architecture x86_64): Mach-O 64-bit bundle x86_64
I don't have any other customizations in my Apache or PHP (and I really don't want to move to MacPorts, I had bad luck with it in the past).
Has anybody had luck getting the gettext extension compiled on 10.6 ?It looks like you have the .so file under the wrong directory (or is it an old version?).
PHP is trying to load /usr/lib/php/extensions/no-debug-non-zts-20090626/gettext.so (presumably because that's what you listed in php.ini), but the file you're looking at is /usr/local/lib/php/extensions/no-debug-non-zts-20060613/gettext.so. 20060613 looks like a date -- almost 4 years ago, so make sure you compiled the correct version. -
[SOLVED] Cinnamon 2.2.8: Extensions not working
1. -- Configuring Cinnamon extensions
NOTE! This problem has been solved. See message #13 for details.
The first problem I have is that I'm not able to configure any extensions in the recent Cinnamon 2.2.8 in Arch Linux.
http://s29.postimg.org/v2ierpco7/cinnam … onsbug.png
When clicking Configure button (either one showed in the picture above or the other on bottom of the main window), I get the following terminal output. On this example, I clicked the button twice:
Loading Extensions module
Could not find any instance settings data for this extension - are you sure it is loaded, and supports settings?
Traceback (most recent call last):
File "/usr/lib/cinnamon-settings/bin/ExtensionCore.py", line 475, in <lambda>
item.connect('activate', lambda x: self._configure_extension())
File "/usr/lib/cinnamon-settings/bin/ExtensionCore.py", line 1009, in _configure_extension
settingContainer = XletSettings.XletSetting(uuid, self, self.collection_type)
File "/usr/lib/cinnamon-settings/bin/XletSettings.py", line 53, in __init__
self.build_single()
File "/usr/lib/cinnamon-settings/bin/XletSettings.py", line 145, in build_single
self.current_id = instance_key
UnboundLocalError: local variable 'instance_key' referenced before assignment
Could not find any instance settings data for this extension - are you sure it is loaded, and supports settings?
Traceback (most recent call last):
File "/usr/lib/cinnamon-settings/bin/ExtensionCore.py", line 475, in <lambda>
item.connect('activate', lambda x: self._configure_extension())
File "/usr/lib/cinnamon-settings/bin/ExtensionCore.py", line 1009, in _configure_extension
settingContainer = XletSettings.XletSetting(uuid, self, self.collection_type)
File "/usr/lib/cinnamon-settings/bin/XletSettings.py", line 53, in __init__
self.build_single()
File "/usr/lib/cinnamon-settings/bin/XletSettings.py", line 145, in build_single
self.current_id = instance_key
UnboundLocalError: local variable 'instance_key' referenced before assignment
Traceback (most recent call last):
File "/usr/lib/cinnamon-settings/bin/XletSettings.py", line 71, in on_hide
self.content.hide()
AttributeError: XletSetting instance has no attribute 'content'
My gcc version is:
gcc (GCC) 4.9.0 20140507 (prerelease)
and python version:
Python 3.4.0
I installed a fresh Arch Linux two days ago so there should not be old configurations etc. in the system.
2. -- Missing several Cinnamon modules
NOTE! This problem has been fixed by loqs & clfarron4. It was caused by a missing mintlocale package. Thank you for your attention!
The second problem I have is lack of the following Cinnamon settings in GUI (cinnamon-settings):
- region (Regional Settings)
- Languages
Output when trying to load, for example, region module:
[fincer@fincer-laptop ~]$ cinnamon-settings region
Unknown module region, using cinnamon-control-center
I already checked folders
/usr/lib/cinnamon-settings/modules/
/usr/lib64/cinnamon-settings/modules/
/usr/lib/cinnamon-control-center-1/panels/
/usr/lib64/cinnamon-control-center-1/panels/
I have libregion.so in panels folder but I couldn't find more relevant information related to the problem.
Any help is appreciated. Thank you!
Last edited by Fincer (2014-05-22 20:54:24)Thanks clfarron4. I voted for the package.
I needed to re-open this topic since it seems that issue number 1 is still alive.
To be more detailed, I can currently access extension configurations via configure button in cinnamon-settings. However, I noticed that I'm not able to actually change any extension settings and thus, these extensions are not working. In my Linux Mint installation (Cinnamon 2.0.6), they are working perfectly fine.
So, I still have GUI access to extension configurations but the settings affect nothing, no matter of my customizations. They simply do not run.
I get this terminal output while running cinnamon-settings and entering to configuration tab:
Opacify plugin:
__init__ took 236.561 ms
Loading Extensions module
Could not find tooltip for key 'opacity' in xlet '[email protected]'
Could not find tooltip for key 'beginTime' in xlet '[email protected]'
Could not find tooltip for key 'beginEffect' in xlet '[email protected]'
Could not find tooltip for key 'endTime' in xlet '[email protected]'
Could not find tooltip for key 'endEffect' in xlet '[email protected]'
Backgrounds plugin:
__init__ took 309.628 ms
Loading Extensions module
Could not find tooltip for key 'path' in xlet 'backgrounds@mohammad-sn'
Could not find tooltip for key 'time' in xlet 'backgrounds@mohammad-sn'
My basic question is: what in Earth could I miss here? I have correct extension files & subfolders in both ./.local/share/cinnamon/extensions and ./.cinnamon/configs/.
Last edited by Fincer (2014-05-22 07:56:53) -
Extension is not a valid entry
We have some extensions that you cannot connect to from outside calls. When a outside call comes in and the caller tries to connect to certain extensions they get a message that the extension is not a valid entry. I do know that the extensions that get this error do not have voice mail enabled. Is a voice mail box required for an outside call to be routed to an internal DN? How can I allow calls to be routed to these DNs without a voice mail box?
Thanks!
BillOK so its not working again. Yesterday it seemed to be working fine although I did not test from an internal line. After following your suggestions I got it to ring to the extension and I tested a few others that did not have Unity users (VM) and they worked fine too. As of some time between now and then when you call the main line from outside and then enter the extension it says "You cannot be transferred to this number, please check the number and try again". If I cdial the 4 digit extension from an internal line it puts me right into the Unity system, if I then try the extension again I get the same message "You cannot be transferred to this number, please check the number and try again".
Here is my line restrictions table.
Here is my Greeting config for my main (I assume) line
Any suggestions?
Thanks again! -
Is it possible to dial an extension on a remote PBX system?
One thing I've never been able to figure out how to do in Lync is to dial an address book contact that has an extension configured-e.g. where I need to dial a main number, and then enter a 4 digit extension once connected. Most PBX systems let you
dial something like 19055551234,,,1234 (where , is a 2s pause), or even 19055551234^1234 (where ^ is wait for connect). In Lync though, there doesn't appear to be any way to interpret any of these characters. I've tried having a dial plan normalize
these to e.164 (tel:+19055551234;ext=1234), but this gets ignored by the gateway (in this case an Audiocodes M1000). Should that be supported? Is there a way to get Lync (or the GW) to dial DTMF after a connection?In Lync, not so easy. With AudioCodes, you might have an answer! If you want to send digits that are present in the SIP To header such as an extension (and you can ensure they are with Lync normalization) after the phone goes off
hook, you can enable "Enable Digit Delivery to Tel". This is under "Configuration -> VoIP -> SIP Definitions -> Advanced Parameters."
From there it's about manipulations, you can insert pauses by using the letter "p". Check out the below from the AudioCodes 6.6 manual, or search for Digit Delivery in whatever version of the manual that matches your firmware. Or, just open a
ticket with AudioCodes support and tell them you need help with Digit Delivery. :)
Enables the Digit Delivery
feature, which sends DTMF digits of the called number to the device's port
(analog)/B-channel (digital) (phone line) after the call is answered (i.e.,
line is off-hooked for FXS, or seized for FXO) for IP-to-Tel calls. <o:p></o:p>
§ [0]
Disable
(default). <o:p></o:p>
§ [1]
Enable =
Enable Digit Delivery feature for the FXO/FXS device. <o:p></o:p>
<o:p></o:p>
For digital interfaces: If the
called number in IP-to-Tel call includes the characters 'w' or 'p', the device
places a call with the first part of the called number (before 'w' or 'p') and
plays DTMF digits after the call is answered. If the character 'w' is used, the
device waits for detection of a dial tone before it starts playing DTMF digits.
For example, if the called number is '1007766p100', the device places a call
with 1007766 as the destination number, then after the call is answered it
waits 1.5 seconds ('p') and plays the rest of the number (100) as DTMF digits.
<o:p></o:p>
Additional examples:
1664wpp102, 66644ppp503, and 7774w100pp200. <o:p></o:p>
Notes: <o:p></o:p>
§ For this parameter to take effect, a device reset is
required. <o:p></o:p>
§ For analog interfaces: The called number can include
characters 'p' (1.5 seconds pause) and 'd' (detection of dial tone). If
character 'd' is used, it must be the first 'digit' in the called number. The
character 'p' can be used several times. For example (for FXS/FXO interfaces),
the called number can be as follows: d1005, dpp699, p9p300. To add the 'd' and
'p' digits, use the usual number <o:p></o:p>
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Extension Mobility: Automatic logout
Dear Team,
Hi Team,
Our customer requirement is that user should log out at 4:00PM even they are login at any time. Can we achieve this. I know we set the maximum login time but we can not schedule.
Is there any way, by XML application etc. Kindly advise.
BR
Muhammad IrfanThe 'extensionmobilitydynamic' table is used to store the information of users logged into extension mobility.
You can do a 'run sql select * from extensionmobilitydynamic' from SSH of a CUCM server to find out the column names and values when a user logs into EM.
Here's a customized query that I came up with (modified from existing CUCM admin sql query), to show a few parameters that I wanted to look at, for EM users :
run sql SELECT device.name AS Devicename, typemodel.name as Model,
enduser.userid AS EndUser, numplan.dNOrPattern as DirectoryNumber,
routepartition.name AS Partition, D2.name AS DeviceProfile FROM
extensionmobilitydynamic LEFT OUTER JOIN device ON
extensionmobilitydynamic.fkdevice = device.pkid LEFT OUTER JOIN typemodel
ON typemodel.enum = device.tkmodel LEFT OUTER JOIN enduser ON
extensionmobilitydynamic.fkenduser = enduser.pkid LEFT OUTER JOIN Device AS
D2 ON D2.pkid = extensionmobilitydynamic.fkdevice_currentloginprofile LEFT
OUTER JOIN DeviceNumPlanMap ON DeviceNumPlanMap.fkdevice =
extensionmobilitydynamic.fkdevice_currentloginprofile LEFT OUTER JOIN
NumPlan ON DeviceNumPlanMap.fkNumPlan = numplan.pkid LEFT OUTER JOIN
RoutePartition ON numplan.fkRoutePartition = routepartition.pkid WHERE
((D2.name IS NOT NULL AND D2.name!='') AND (enduser.userid IS NOT NULL AND
enduser.userid!='')) order by D2.name
Example :
admin:run sql SELECT device.name AS Devicename, typemodel.name as Model,
enduser.userid AS EndUser, numplan.dNOrPattern as DirectoryNumber,
routepartition.name AS Partition, D2.name AS DeviceProfile FROM
extensionmobilitydynamic LEFT OUTER JOIN device ON
extensionmobilitydynamic.fkdevice = device.pkid LEFT OUTER JOIN typemodel
ON typemodel.enum = device.tkmodel LEFT OUTER JOIN enduser ON
extensionmobilitydynamic.fkenduser = enduser.pkid LEFT OUTER JOIN Device AS
D2 ON D2.pkid = extensionmobilitydynamic.fkdevice_currentloginprofile LEFT
OUTER JOIN DeviceNumPlanMap ON DeviceNumPlanMap.fkdevice =
extensionmobilitydynamic.fkdevice_currentloginprofile LEFT OUTER JOIN
NumPlan ON DeviceNumPlanMap.fkNumPlan = numplan.pkid LEFT OUTER JOIN
RoutePartition ON numplan.fkRoutePartition = routepartition.pkid WHERE
((D2.name IS NOT NULL AND D2.name!='') AND (enduser.userid IS NOT NULL AND
enduser.userid!='')) order by D2.name
devicename model enduser directorynumber partition deviceprofile
=============== ========== ======= =============== =========
========================
SEP000D284CD86B Cisco 7960 em1 1020 phones Extension
Mobility - EM1
SEP000D284CD86B Cisco 7960 em1 1000 phones Extension
Mobility - EM1
admin:
I am not aware of a 3rd party software which can do bulk EM logouts at a particular time of the day. However, here's my 2 cents :
- sql query run on the CUCM database to find out the devices logged into EM (probably a script that can run it at a specified time of the day - not sure
how or if it can be implemented)
- from the sql output, send customized http requests to the EM server, to log these phones off EM
- Sriram
Please rate helpful posts !
Maybe you are looking for
-
LR startet nicht im Adobe Fotografieprogramm...
... nach Ablauf der 30 Tage Probezeit, startete LR erwartungsgemäß nicht mehr ohne die Eingabe einer Lizensnummer zu fordern. Ich entschied mich für das Adobe Fotografieprogramm und PSCC Testversion wandelte sich ruckzuck in eine "normale" Version. D
-
After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram
System Specs : CPU : Core i7 4770k Memory : 16 GB DDRIII Graphic Card : GTX 770 4GB RAM Storage : 256 GB SSD + 2 TB HDD OS : Windows 7 SP1 Using After Effects CC 12.2.1.5 NOTE : NOT ANY ADDITIONAL HARDWARE IS ATTACHED TO
-
Hello, I have both an iPhone 4 and an iPhone 4S and I have the same problem on both of the devices when it comes to the activation of iMessage. And it gets on my nerves, because I can't get it to work. As you probably understand, i can't activate Fac
-
JDOM beta 8 installation - compilation errors
Can someone give me some suggestions? I am spinning my wheels on what to do. This should be fairly simple... I installed and extracted jdom beta 8, added the location to xerces.jar to my classpath, and I still receive the following errors: FibonacciJ
-
Double NATting ASA 5510 8.4 how to ?
Hi, I have a situation that creates a bit of a headache for me. The task is to use SMB / NetBIOS (Win Server 2008 R2) to open a connection and transfer a file from host 2 to host 1. Sounds easy, I know. Here's the setup: Host 1: 192.168.10.34 (on 192