8.0.5 install fails ..." make: command not found ..."

Hi there,
I hope anyone can solve my installation problem.
When running the installer to install Oracle 8.0.5 RDBMS the
installer reports on "O/S error"
Error during action 'creating rdms/lib/psoliblist'.
Command: make -f ins_rdbms.mkb
/oracle/oracle805/rdbms/lib/psoliblist
sh: make: command not found
I haven't been able to find an "make" command/file on my redhat
6.0
Is there on anyone else's redhat 6.0?
Thanx 4 any replies.
null

I had this same thought and had made sure the make-7.77-6 was
installed. I restarted linux (just incase) and attempted to
install oracle once again. I am installing Oracle 8051 EE on RH
60. Linux is running on a PII 300 with 128M. The error i
recieve is listed below.
I continue to recieve the same error as OTN usere "truncate1".
Though i get a bit more text with the error this time around.
<><><><><><><><><><><><><><><><><><><><><>
error: make -f
/oracle/oracle8051/network/lib/ins_network.mkntcontab.o
(if [ "compile" = "compile" ] ;then \
/oracle/oracle8051/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /oracle/oracle8051/lib/ntcontab.o ;\
mv ntcontab.o /oracle/oracle/lib ;fi)
/bin/sh: cc: command not found
mv: ntcontab.o No such file or directory
make: ***[ntacontab.o] Error 1
<><>><><><><><><><><><><><><><><><><><>
Any thoughts?
Thanks,
dennis anthony.
[email protected]
Jan Gr0nlien (guest) wrote:
: truncate1 (guest) wrote:
: Hi,
: my RH 6.0 has make installed in RPM "make-3.77-6".
: That should do it for you to.
: Regards Jan
: : Hi there,
: : I hope anyone can solve my installation problem.
: : When running the installer to install Oracle 8.0.5 RDBMS the
: : installer reports on "O/S error"
: : Error during action 'creating rdms/lib/psoliblist'.
: : Command: make -f ins_rdbms.mkb
: : /oracle/oracle805/rdbms/lib/psoliblist
: : sh: make: command not found
: : I haven't been able to find an "make" command/file on my
redhat
: : 6.0
: : Is there on anyone else's redhat 6.0?
: : Thanx 4 any replies.
null

Similar Messages

  • Make: command not found?

    Hi,
    Just reinstalling Arch and trying to install my NIC drivers for my Motherboard.
    Copied the drivers into /tmp/Lan
    There is a Makefile in the directory...
    When using make or KBUILD_NOPEDANTIC=1 make i just receive the following answer:
    -bash: make: command not found
    It worked last time...have I missed installing something to be able to use the make function?

    skottish wrote:
    ftornell wrote:
    Hi,
    Just reinstalling Arch and trying to install my NIC drivers for my Motherboard.
    Copied the drivers into /tmp/Lan
    There is a Makefile in the directory...
    When using make or KBUILD_NOPEDANTIC=1 make i just receive the following answer:
    -bash: make: command not found
    It worked last time...have I missed installing something to be able to use the make function?
    Install all of the group base-devel if you're going to be building stuff.
    What package is that now so I can use pacman, think I got it localy stored in a cache...

  • -bash: make: command not found

    Help me please. I downloaded cdrecord because I need a tool called makeisofs but I am told that I need to compile it first before I can use it. The directions say to type "make" to compile it but when I type make in the terminal window, I get the following message:
    -bash: make: command not found
    I've spent hours looking all over the web for an explanation but I just can not find anything to help me. I even joined some IRC channels but no one types anything in those rooms. It is the weirdest thing.
    Can anyone tell me why I can't compile? The directions I got with the download don't explain a thing.

    I found something that might help. On the second Leopard DVD, there is something called Xcode Tools which I am told has what I need. I'll respond if I have any other questions. Thanks for reading.

  • [SOLVED] make: command not found

    Hello,
    How do I resolve - make: command not found
    Thanks.
    Last edited by RAH (2008-07-19 21:05:37)

    lucke wrote:pacman -S make
    Eventually everyone needs all of base-devel if they're going to build stuff.

  • Error : GCC ( gnu c compiler)make command not available when I install gnuplot-4.4.3 on OS X10.6.8.

    Dear all,
    I hope this is clear
    Goal: To install gnuplot for OS X.
    Problem: gcc make command not found. When I try to install gnuplot 4.4.3 on os X 10.6.8
    System hardware : Mac mini 2010.
    OS : OS X 10.6.8 snow leopard
    Application installed working : TeXshop 2.3.7, AquaTerm v1.0.1 (1.0.1)
    Questions: Any help or advise on how  and where to get the make command ?

    BTW...This is my error message at terminal....shown below
    Last login: Thu Feb 23 09:37:21 on console
    /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
    lims-mac-mini:~ lim$ /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/configure ; exit;
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /Users/lim/Desktop/Source_gnuplot4.4.4/gnuplot-4.4.4/install-sh -c -d
    checking for gawk... no
    checking for mawk... no
    checking for nawk... no
    checking for awk... awk
    checking whether make sets $(MAKE)... no
    checking for gcc... no
    checking for cc... no
    checking for cl.exe... no
    configure: error: in `/Users/lim':
    configure: error: no acceptable C compiler found in $PATH
    See `config.log' for more details.
    logout
    [Process completed]

  • Make: /usr/bin/install: Command not found

    I'm working on a PKGBUILD, but I'm running into this:
    make: /usr/bin/install: Command not found
    make: *** [install] Error 127
    ==> ERROR: Build Failed.
    Aborting...
    What would cause this?  Old code?  Missing package?

    It was actually really old code, after a bit of successful this-should-probably-work script editing!  I created a package in the AUR called dasm, which is an assembler for the Atari 2600 among many other systems.
    http://aur.archlinux.org/packages.php?ID=37200

  • Oracle apps 12i pre install checks fails in cl; command not found

    Hi guyz,
    Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
    The installation fails in
    command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
    D:\stage12\startCD\Disk1\rapidwiz>echo off
    /cygdrive/c/WINDOWS/system32/cmd
    'which' command is available.
    /cygdrive/d/Tools/MKS/mksnt/bin/gnumake
    'gnumake' is available.
    'cl' is not available.
    ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
    cl: Command not found.
    RW-50011: Error: - System Utilities Availability test has returned an error: 1
    There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
    I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
    Im doing this for a week now, had no luck.
    I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
    Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
    I appreciate any help.

    Oracle E-Business Suite R12 Installation on Windows 2003
    Re: Oracle E-Business Suite R12 Installation on Windows 2003
    If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
    The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

  • Make, Make install - Command not found. How do I get these commands working

    Hi guys!
    I am trying to compile the php using the command ./configure and make, make install but every time I try to use the comand "make" it says "command not found". Do you know how can I install these bibliotec?
    Thanks in advance.
    Felipe Moreira.

    Hi Felipe, Welcome to Apple's Users Help Users Forums.
    Glad you got it solved.
    Thanks in Apple Forums is through the Stars system. See the blue box at the top of the thread as well as the Apple emails re new posts to the thread.
    With the buttons just to the left of "Reply" for the OP = Original Poster.
    1 Green Solved available. 10 pts.
    2 Gold Helpful available. 5 pts.
    Mark the buttons at the appropriate post. (Not this one. ;~) )
    Joyous Computing, JP

  • Make: /usr/bin/ar: Command not found

    Dear Team,
    Following error are encountered while installing 11gR2 on RHEL 5.5.
    make file log:
    /usr/bin/make -f ins_rdbms.mk rat_on part_on dm_on olap_on sdo_on ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1//bin/sh: /usr/bin/ar: No such file or directory
    /usr/bin/ar cr /u01/app/oracle/product/11.2.0/db_1/rdbms/lib/libknlopt.a /u01/app/oracle/product/11.2.0/db_1/rdbms/lib/kecwr.o
    make: /usr/bin/ar: Command not found
    make: *** [rat_on] Error 127
    - All rpms requirements are met. I have re-install GCC as well.
    Thanks in Adv.
    Yuvraj

    # yum provides /usr/bin/ar
    Loaded plugins: security
    binutils-2.17.50.0.6-14.el5.x86_64 : A GNU collection of binary utilities.
    Repo        : el5_u5_base
    Matched from:
    Filename    : /usr/bin/ar
    # ll /usr/bin/ar
    -rwxr-xr-x 1 root root 52632 Feb 11  2010 /usr/bin/arCould your file system or system installation be damaged?
    Perhaps you can try the following:
    # touch /forcefsck
    reboot

  • [SOLVED] Error uninstalling eclipse: "post-install: command not found"

    When I try uninstalling eclipse , I get "error: command failed to execute correctly"
    w0ng@e8500 ~
    % sudo pacman -Rns eclipse
    checking dependencies...
    Targets (8): glib-networking-2.30.2-1 gsettings-desktop-schemas-3.2.0-1 gstreamer0.10-0.10.36-1
    gstreamer0.10-base-0.10.36-1 libproxy-0.4.7-1 libsoup-2.36.1-1 libwebkit-1.6.3-1
    eclipse-3.7.2-2
    Total Removed Size: 243.84 MiB
    Do you want to remove these packages? [Y/n] y
    (1/8) removing eclipse [######################################] 100%
    /tmp/alpm_eY6rVO/.INSTALL: line 10: post-install: command not found
    error: command failed to execute correctly
    (2/8) removing libwebkit [######################################] 100%
    (3/8) removing libsoup [######################################] 100%
    (4/8) removing glib-networking [######################################] 100%
    (5/8) removing libproxy [######################################] 100%
    (6/8) removing gsettings-desktop-schemas [######################################] 100%
    No schema files found: removed existing output file.
    (7/8) removing gstreamer0.10-base [######################################] 100%
    (8/8) removing gstreamer0.10 [######################################] 100%
    w0ng@e8500 ~
    But all files appear to be removed successfully.
    w0ng@e8500 ~
    % sudo updatedb && locate eclipse
    /usr/share/highlight/themes/edit-eclipse.theme
    /usr/share/icons/Faenza/apps/16/eclipse.png
    /usr/share/icons/Faenza/apps/22/eclipse.png
    /usr/share/icons/Faenza/apps/24/eclipse.png
    /usr/share/icons/Faenza/apps/32/eclipse.png
    /usr/share/icons/Faenza/apps/48/eclipse.png
    /usr/share/icons/Faenza/apps/64/eclipse.png
    /usr/share/icons/Faenza/apps/96/eclipse.png
    /usr/share/icons/Faenza/apps/scalable/eclipse.svg
    /var/abs/community/eclipse-cdt
    /var/abs/community/eclipse-cdt/PKGBUILD
    /var/abs/core/licenses/eclipse-1.0.txt
    /var/abs/extra/eclipse
    /var/abs/extra/eclipse-ecj
    /var/abs/extra/eclipse/PKGBUILD
    /var/abs/extra/eclipse/eclipse.desktop
    /var/abs/extra/eclipse/eclipse.install
    /var/abs/extra/eclipse/eclipse.sh
    /var/abs/extra/eclipse/eclipse.svg
    /var/abs/extra/eclipse-ecj/PKGBUILD
    /var/abs/extra/eclipse-ecj/ecj
    w0ng@e8500 ~
    Should I be concerned or is everything fine? Can anyone reproduce this?
    Last edited by w0ng (2012-03-28 19:00:30)

    Check /var/abs/extra/eclipse/eclipse.install. Typo in post_remove: post-install should be post_install. You can run the post_install manually (and maybe report this in the bug tracker), but it just updates the gtk icon cache, so it's nothing to worry about.

  • I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

    i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

    "command not found" means ... there is no such thing.
    Has the .rpm been installed?
    http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

  • (OEL 4.7) -bash: sqlplus: command not found after install of 10g R2

    Hi all
    I'm new to Linux and I would like your help and directions on a few things:
    After 2 days of battle with RPM's (i386 vs x86_64) i was finally able to install 10g R2 on OEL 4.7 x86_64 system without any errors.
    please check if all these settings are correct and help me how to start sqlplus? or create a database with dbca
    I followed all the directions in Doc ID: 339510.1.
    During installation i choose this path as the ORACLE_HOME
    /u01/app/oracle/product/10.2.0/
    I did not however installed the default database.
    I then ran the two scripts at the end of the installation as root.
    Here are my settings:
    oracle bash_profile:
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    here is my oracle env result
    [oracle@nycoralp01 /]$ env | grep -i ORACLE
    OLDPWD=/home/oracle/oraInventory
    USER=oracle
    ORACLE_BASE=/u01/app/oracle
    MAIL=/var/spool/mail/oracle
    PATH=/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
    HOME=/home/oracle
    LOGNAME=oracle
    ORACLE_HOME=/product/10.2.0/db_1
    here is my echo $ORACLE_HOME result:
    [oracle@nycoralp01 /]$ echo $ORACLE_HOME
    /product/10.2.0/db_1
    Can someone please tell me what did i miss or did not set?
    When i try to run sqlplus i get this error
    [oracle@nycoralp01 /]$ sqlplus
    -bash: sqlplus: command not found
    Any help appreciated

    I change it in my bash_profile
    $ vi ~oracle/.bash_profile
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    and i'm still getting the same error
    -bash: sqlplus: command not found
    Is there anything else i'm missing? do i have to restart anything?

  • [SOLVED]/usr/lib/arch-tempfiles line 106: install:command not found

    Hi everyone!
    This is my boot.log
    http://pastebin.com/1gfynhSN
    It says"/usr/lib/initscripts/arch-tmpfiles:line 106: install:command not found".This is leading to problems such as dbus and network manager not being started(even manually),no shutdown option,not able to 'open' log files without sudo  etc.
    I think a possible reason for this is that I had messed up with symlinks.I had issued the command
    sudo ln -s /bin/install /usr/bin/install
    .Then I had used
    cd /bin/
    unlink install
    Now,I find that /bin/install and /usr/bin/install does not exist.(I have deleted them!) .How can I fix this up?Any help would be appreciated.
    Last edited by adwaita45 (2012-04-05 20:41:40)

    Reinstall coreutils (or manually extract install from the package and put it in /usr/bin).
    Last edited by Raynman (2012-04-05 18:14:10)

  • When i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

    when i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

    You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • [SOLVED] Make Bash Completion Error (Command Not Found)

    When attempting to tab complete the `make` command, I am met with the following when I hit tab:
    $ make s[tab]bash: 23:set: command not found
    Strangely, if I continue hitting tab, it seems to work eventually, but with the same error popping up:
    $ make s[tab]bash: 23:set: command not found
    ched.[tab]bash: 23:set: command not found
    [tab]bash: 23:set: command not found
    sched.1.gz sched.tar.gz
    $ make sched.
    I've never seen anything like this.  I've tried reinstalling bash completion and make to no success.  The Makefile itself is fine and functional.  Other programs' bash completions seem to work just fine.  Help!
    Last edited by goakley (2014-03-23 13:56:50)

    It seems the problem no longer occurs.  The only change that seems to have happened is a bash-completion upgrade that happened yesterday.  I'm a bit disappointed to have not found the actual issue.

Maybe you are looking for

  • Weird Sound in iMovie

    When i edit/save a movie i see a red line that makes a wierd chirping sound. How do I get rid of it?

  • Illustrator is Printing too Light

    I'm pretty new to Illustrator and can't get it to print correctly.  I'm using the color setting my Illustrator teacher gave me.  The files print perfectly from other programs on the computer- so it is just an Illustrator problem.  People told me to m

  • Need to make sure

    Hi everybody and happy new year to all, I would like to make sure that I understand well how Time Machine is working before starting on the wrong foot.... My question is regarding on iphoto. SInce I shoot a LOT of pictures, my iphoto library becomes

  • Make to order with Prod version with object depedency

    I m using 2 production version. In both case BOM & Routing having object dependency. Its make to order scenario. How can I select prod version in costing as well in configuration in sales order. Because by default its taking first version for both co

  • Purchases not showing up

    My purchases are not showing under itunes.  I have hundreds and only 2 show