Can't detect or print to C8189A All-in-One-Printer on a wired LAN

Computers on my home wired LAN repeatedly but intermittently stop being able to print to the HP C8189A printer attached via wired LAN connection. I began trouble shooting last night and uninstalled all HP software to start afresh.
I cannot print to my HP C8189A all-in-one printer conected to a wired network from my desktop PC running Windows XP with SP3. I can see the printer has pulled an IP from the router by looking at the router's attached client list. I can ping the printer at its assigned LAN IP address.
My desktop pc and the C8189A printer share a common DLINK Gigabit Switch which connects wired wired LAN to the DLINK router.
I uninstalled and reinstalled all HP software but during the HP Solutions Center software reinstall it could not find the PRINTER on the lan, even when inserting the Printer's assigned IP address.
When checking the network configuration from the printer, it confirms that it is has the correct IP address, but the HP software still cannot detect it. I have pulled the power connector from the back of the power a couple times to RESET the printer. This usually corrects what is now a terribly frustrating problem accessing the printer.
Additional factoids: 1) other PCs can print to this printer, 2) SPYBOT Search & Destroy is running on my PC and popped some registry change windows during the install.
I'm running out of ideas - any suggestions please?
Message Edited by VARocketry on 01-09-2009 11:54 AM

Hmmm ... this is interesting. In review:
You can print intermittently from your XP SP3 box to the OJP L7680.
Disabling the SW firewall (Norton/Symantec, Zonealarm, McAfee, etc) on the SP3 PC doesn't help.
Other computers on your network have no problems printing to the OJP L7680.
You are running a wired (Ethernet) network.
Did I get this right? I'd like to ask a few more questions:
What are the other types of computers on your network and what firewall do they run?
The next time your XP SP3 computer has trouble printing to the OJP L7680, try to access the printer's internal web page.
What are the IP addresses of the other devices on your network? By chance, is there a duplicate address on your network?
Finally, you can try adding the print driver manually to see if we can get you printing. This is the sequence for XP:
Click "Start" button --> Printers and Faxes.
Under Printer Tasks, click "Add Printer".
Click "Next" button on the first Add Printer Wizard window.
If the option for Local or Network printer appears, select "Local printer attached to this computer" and deselect the "Automatically detect and install My Plug and play printer" option. Click "Next".
Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and configured. Click "Next" button.
Under "Add Standard TCP/IP Printer Port" enter the printer's host name (that is the hostname of printer that printed in network configuration page)
under "Additional Port Information" select "Standard". Click Next, and then click Finish.
Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
The Printer name will be highlighted on the next window.
Click "Next" button.
It ask for the Printer name -- leave it as is.
Select "Yes" option for making the printer default.
Click "Next" button.
The Printer Sharing dialog box will open.
Click "Next" button.
The Print Test Page box appears.
Select "Yes" option to print a test page.
Print Test Page.
Completing the Add Printer Wizard box appears.
Click "Finish" button and wait for the files to copy
This should work to get you a print queue for your XP box.
Regards / Jim B
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Similar Messages

I can not receive /send fax on my all in one printer

I am not able to send/receive fax from my all in one printer,do any one have an idea as to how it works?

Hi Jopoku,
To try and resolve the issue, please ensure that your phone line source is connected to the LINE port on the back of the unit. If you have a telephone or answering machine that you would like to connect to the unit as well, please connect it to the EXT port. Once these items are confirmed, please click here for steps on setting up the FAX using the operation panel of the unit.
Once the fax has been setup, please follow the steps located here to send faxes, and here to receive faxes. If you still have difficulty sending and receiving faxes, please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT3669 can I use PRIZMO with Lexmark Pro901 all in one printer scaner?

EVER SINCE I PURCHASED A LEXMARK PRO901 ALL IN ONE PRINTER I HAVE HAD NOTHING BUT PROBLEMS EVERYTIME I DO AN UP DATE ON MY MAC OR LEXMARK PRINTER THE SACNNER FAILES TO WORK I PURCHASED THIS PRINTER BECAUSE I WAS TOLD I COULD EDIT DOCUMENTS I SCAN USING OCR BUT THIS HAD NOT BEEN THE CASE MOST RECENTLY I AM TOLD LEXMAR WILL NOT WORK WITH OSX 10.8 SO NOT MY ALL IN ONE PRINTER IS A PRINTER THAT IS USLESS TO ME.

Which printer drivers are you using? I had a real problem with one of these after an upgrade to 10.4.3 that required an archive & install of the OS and a reinstall of the printer and scanner drivers before it would work properly so I suggest you try that first.

Printer Error - HP All-in-One Printer App

I have the HP Photosmart B210 and have been using the HP Printer Control app on my Lenovo laptop. It has worked successfully until a few weeks ago. When I read some of the reviews on the updated app - which is now HP All-in-One Printer Remote, I realized upgrading to Windows 8.1 may help. Once updated to Windows 8.1 I did start printing! However, my documents would only print half-way through and then I receive an error message and the printing stops. So, I will get one or two pages out of a 4 to 5 page document with the same Error message half-way through. No description about the error - just error - printing has to be cancelled. Suggestions? Pleeeeaaaassssseeee!

Hello Seahorse1305,
Welcome to the forums!
I am here to assist you with the printing issue you are having with your Photosmart B210. The first thing I do recommend, is running the HP Print and Scan Doctor to find and fix printing and scanning problems. If there is more of an issue that the tool cannot fix, it will let you know what the problem is.
Please let me know how this turns out for you!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can't setup wireless printing : HP4385 Photosmart All-In-One Printer / Linksys Router/Mac OS 10.5

I am attempting to set up my printer to operate wirelessly. I have the computer and printer connected via USB for the setup.
I have :
PRINTER : HP All In One Photosmart C4385
ROUTER : Linksys wireless B (WPA security)
COMPUTER : Macbook Mac OS 10.5.8 notebook.
I've downloaded the correct HP software.
On the printer, the wireless radio is set to "on"
PROBLEM : Using the HP Setup Assistant, I select my Wi-Fi network, and get an error message " the selected Wi-Fi network is not within reach of the device"
The printer and router are in the same room with nothing blocking them.
Print out of HP Network Configuration Page :
General Information
Network Status : Offline
Active Connection Type : None
URL : http://0.0.0.0.0
Firmware Revision : WPxxFN0723AR
Hostname : HP8766D2
Serial Number: CN7CDD51P80509
Admin Password : Not Set
802.11 Wireless
Hardware Address (Mac) : 001e0b8766d2
Status : Disconnected
mDNS
Status : Enabled
Service Name : Photosmart C4380 series [8766D2]
SLP
Status : Enabled
Any help greatly appreciated !

Print a WIreless Network Test from the front of the printer. It will self-test the printer's radio.
Can you give me the exact model number of your router? If it is a 802.11b router, it may be time for a new one. If it is, are you sure you are using WPA and not WEP?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I install the HP PSC 1350 All-in-One Printer {Windows XP} w/o a CD?

I'm having difficulty installing my AIO printer without a CD & I really would like to update the Driver as well... I'm so frustrated!

Hi @glgaucher
I am sorry to hear that this has been a frustrating experience for you. I would like to help you obtain the full feature software and driver for your PSC 1350. Please use the following link to download and install the software; gc_w01_ENU_NB.exe.
This download includes the HP Photosmart Software Suite (enhanced imaging features and product functionality) and Driver. If you only want the print driver (without the Photosmart Software Suite), it is available as a separate download named "HP Officejet and PSC Basic Software and Driver".
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Deskjet 3050 A e all in one printer problems printing from ipad

my ipad is connected wirelessly through the WPS set up to a ZyXEL router.
can't connect desk jet 3050 Ae all in one printer to the wireless network. Ipad can't find printer and print
Can you help and give detailed instruction how to set up?

In order to set the wireless connection, you should use the Software from your PC.
You will be prompted to temporary connect a USB in order to configure the printer.
If the sofware is not yet installed on your PC, follow the instructions below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already completed the software installation, you may find the wireless configuration as following:
1. From the computer’s start menu select All Programs or Programs, and then select HP. 2. Select HP Deskjet 3050A J611 series 3. Select Printer Setup and Software Selection 4. Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Problem staying connected to my Wireless Network with my HPPhotosmart e-All-in-One Printer - D110a

I just bought a new HP wireless printer replacing my old HP wireless printer which the wireless part worked fine, but the printing died.
New printer HPPhotosmart e-All-in-One Printer - D110a. I have installed and re-installed the software and drivers but can't get my printer to stay connected to my laptop. I have a Linksys "WRT54GL router but have the printer set with a static IP address. When I run tests on the computer and printer everything says it is fine. But every 30 seconds or so.. my printer goes offline on my computer and is especially noticeable when I am using the HP Solution center because it will keep blinking in the windows bar. I have talked to 4 technicians but no one can figure out what the problem is. They keep saying that it is on my end, but the old printer which was also an HP (Wireless 6150) never had any problems and I have not changed anything in my routing. Is anyone else having this kind of problem and has found a successful solution? Any help would be greatly appreciated.
My computer is running Windows XP SP3
Currently my router has WEP encryption, but I tried them all just to see if that had anything to do with it. (WEP works best for me since I have some devices which can only use WEP to communicate).
Thanks.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.18.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

Setup can't detect network printer Photosmart C7250 all in one

I volunteer for our local historical society. The person who did a lot of the computer maintenance work is not active at this time so I’ve begun to look at things.
There is a Gateway PC running Windows 7 64 bit home premium, a Sony Vio laptop running Vista 32 bit home premium, an HP Laser printer and (of most importance here) an HP Photosmart C7250 All in one printer.
Internet connectivity is via a dsl line with a combination modem/router. I think the modem/router is a Westell or an Actiontec through Frontier Communications (formerly Verizon in this area) but I’m not sure and I’m not at the museum now.
A couple of weeks ago I was able to connect the laptop to the network via wifi. My next step is to connect the laptop wirelessly to the printer so we can print wirelessly over the network. The printer was originally set up through a usb connection so I changed it to a wired Ethernet connection. The PC now successfully prints to the printer over the network. I downloaded the software and drivers directly to the laptop from the HP site and began the installation. When it got to the point of finding the network printer the software couldn’t detect it. I then put in the ip address for the printer (from the network info printed out from the printer) and it still couldn’t find it.
This same situation occurred when I tried to set it up on my personal laptop (Win7 , 64 bit) as well. Setup couldn’t detect the network printer, even after searching for the network ip address.
Since the printer is connected to the network (router) via an Ethernet cable, I don’t have the wifi radio turned on in the printer. This shouldn’t make any difference.
I’ve searched the forums and haven’t seen anything that is like my issue.
I don’t what else to do. Hopefully someone will give me some advice on what to do next.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
If the network has Wireless Isolation turned on it will prevent wired devices from seeing wireless devices. Do you have access to the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Canon all-in-one printer can't print? Please, help

Hello.
I recently bought a Canon Pixma MG3550 all-in-one printer. I didn't get a USB cable in the package so i decided to connect it wirelessly. I tried everything but it just couldn't connect. So, I went to the store and bought a USB cable for printer. I connected my printer with this USB cable and installed drivers from the CD that came with printer. Everything went fine but when it came to the part where I can print test page I clicked 'Execute' and nothing happened. I gave up that and clicked next. When I tried to print a picture it says: 'Windows photo viewer encountered a problem printing your picture. Trying reinstalling your printer, and then try again.' When I tried printing a PDF document nothing happened.
So, my computer (Windows 7, 32 bit) recognizes this printer in Devices and Printers and it's set to deafult printer, but when i click 'Printing Preferences' it says 'Operation could not be completed' and when I click printer properites, it says: 'The Canon MG3500 series printer driver is not installed on this computer. Some printer properites will not be accessible unless you install the printer driver. Do you want to install the driver now?'. If I click Yes, the Add printer driver wizard shows up, but when i go through it and finish it it's still the same. Also, if I click 'Print test page', it says: 'Test page failed to print. Would you like to view the print troubleshooter for assistance? Access is denied.'
Then, if I go to troubleshooter it says that everything is fine. When I go to Canon Quick Menu and click 'Start my printer' it says 'the supported printer cannot be detected' but when I go to 'Diagnose and Repair Printer' it says that everything is okay.
I don't know what to do. I tried reinstalling driver thousands of times, I downloaded drivers from this site and everything, but it's all the same. Also, every time I turn on my printer on button I hear some weird noises two times about 5-10 seconds altogether. I don't know if this is related somehow, but I don't think that my device is broken because it can connect to pc and scanning works perfectly, but printing and copying doesn't.
Please help me, I'm desperate. I'm trying so hard but everything is the same and I'm so tired of this.
Thank you.

If you have any questions, feel free to ask. I hope this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

Can't detect or print to C8189A All-in-One-Printer on a wired LAN

Similar Messages

Maybe you are looking for