[845 Series] Auto restart during os installation?!
can someone pls help me reasonly i am using p4 1.6 Willamate n i buy and 2nd 2.8 northwood n try to install it, it detected at bios, but when during window installation blue screen appear (too fast cant read what's about the blue screen) it will auto restart after that it restart at loading window logo. i do upgrade my bios,i do use 2 pair ddr ram for testing, each time i use single ram to test it (i just use basic system to test hdd, ram, graphic card, hdd n two cd-rom without network card),what was wrong with it? ram, heat, graphic card or incompetible cpu? the temp is around 52'C ?
pls pls help me . Before i give up the P4 2.8 thanks. it is fine when i change back to the old p4 with the full hardware.
below is my pc spc
p4 1.6 Northwood
MSI845PE MAX
2*512ddr 400 (run at 333) kingstam ram
6600gt vga
30 maxtor hdd
sony cd-rom
tdk combo drive
realteck network card
sorry wokannoby, so how do check the amps ? pls tell me i know nothing about it thanks
Similar Messages
-
Windows wants to restart several times during initial installation. How do I restart it in windows, so I don't lose my installation progress?
It would normally restart in to Windows but if you need to do it manually you can hold the Alt key as the chime sounds and then pick the Windows hard drive icon.
-
Is the Snow Leopard Install DVD supposed to auto-eject during installation?
I just recently purchased Snow Leopard and everything seemed to be going well. The installer popped up after I put it into my External DVD Drive and the installation was going smoothly but soon my MBP would restart and the installation would continue. The problem is that at around 35% completion, or in my case 32 minutes left, the disc would come out of the drive and any attempts to put it back in would result in the DVD drive promptly spitting the disc back out.
I don't think it's the MBP that is at fault since I would have received an error message or something of the like. My only guess is that either the Installation DVD is faulty or the External DVD Drive is causing the issue. I'm leaning towards the DVD Drive especially since it suddenly stopped reading the disc entirely while I'm typing this.
I'm using an AmazonBasics USB 2.0 8x DVD Writer External Optical Drive which should be fully compatible with Macs.
Any and all help is greatly appreciated, thanks in advanceYes I checked it on several occasions for dirt, scratches, and the like and everything seems in order.
I'm able to input the setup information after the MBP reboots, the disc ejects after that point while installing.
The reason I'm using an external DVD reader is because the one my MBP doesn't work anymore for whatever reason and the warranty is expired.
Also disregard the comment I made about the external DVD reader not reading anything at all anymore. -
Reboot during lion installation
Hi @all,
i've downloaded lion from the App-Store.
After the download the installer startet automaticly and reboot the System.
The problem is, that the installer starts after the first reboot and failed with no error and shutdown the system.
After restart the MacBook Pro, the system reboots during the installation anymore,
what can i do ?
thx
fortihttp://www.apple.com/support/mac/app-store/contact.html?form=account
-
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
HELP PLS.......when i download iTunes during downloading process on messege shown: "An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.6195 publicKey Token = 1f c8 b3 b9a 1e 18e 3b processo rArhitecture = x86." please refer to Help and Support for more information. HRESULT: 0x80073712.
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes.
Please help .You should check Windows update for Service Pack update, if there is any.
Otherwise, try to fix and update windows system filesas follows:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
Then do the download again. -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM -
My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.Mac OS X: Gray screen appears during startup
-
NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra -
adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.
Maybe you are looking for
-
Report template - How to reference COLNUM in the col template condition?
Hi, I have a query with 4 columns. based on this query I would like to make a report with a row layout that looks something like this: | column1 value | | column2 value | column3 value | column4 value | I created a report template, four column templa
-
How to poke USB IDs to kernel driver
Hi, I have an FTDI USB to RS232 converter, but it is not detected and the driver is not loaded because the vendor uses his own vendor and device ID's. I wonder if it possible to poke the ID's to the kernel driver so that the converter is detected. My
-
HT201304 how to see the apps tcom in my i pod touch
in my ipodtouch i dnot see the apps icom
-
Hello alltogether, I'm a newbie in LabView and I guess for you this question wil be quite easy. I want to have a File which also includes the time from the timer. What is the problem ? As you see, in my lvm file I only get the pixel and the measureme
-
Spaces: trigger to run only in single-monitor setup?
I use a two-monitor setup, and when I'm away from my desk, I like to use spaces and organize my windows that way. I have my most-used applications set up in the spaces pref pane so they open in their own spaces. it works great. but when I then return