890GXM-G65 WOL Wake-on-LAN does not work

I am unable to get the wake-on-LAN to work for this motherboard. Can anyone help?
MB powermgmt is BIOS.
I have enabled at the Win7 network driver-powermgmt the ability to wake the computer.
Win7 x64
AMD X2-255
4Gb
Any help appreciated.

Quote from: Bas on 02-March-11, 00:51:56
No, you can't turn the nic off!! How are you going to wake it when it's turned off?
Unfortunately if "Allow computer to turn off this device to save power" is unchecked,
then "Allow this device to wake the computer" will be greyed out.
I have another PC that WOL works (DELL) and it has all 3 mentioned checked!!!!!
I dont think "Allow computer to turn off this device to save power" means turn off the NIC!!! I think it means enable power management. Maybe a real expert can chime in here.
Hmm....what do I do next????

Similar Messages

Wake on LAN does not wake computer

Hi,
I'm using ARD 3.2 on OSX 10.5.2 on a dual G5 system. Its IP address is 192.100.1.102, and it is connected using the built-in wired Ethernet jack.
I can't wake my other computer, which is a G4 iMac running OSX 10.4.11. It is also connected to the network using its built-in wired Ethernet connection, with an IP address of 192.100.1.100. I have also disabled the wireless interface in this system. I have verified that under System Settings, the check box "Wake for Ethernet network administrator access" is checked.
Both systems are connected to a D-Link home router like many people have. Nothing exotic. But when I try to Wake the G4 using ARD, under Manage -> Wake, it does not work. The G4 doesn't respond, and eventually ARD times out and gives up.
However, two interesting points:
1. I found a freeware utility called "WakeUp" at http://www.coriolis.ch/en/wakeup and that is always able to wake up the G4.
2. I have found that if I put the G4 to sleep using ARD, I am then able to wake it up using ARD also.
Any help?
Thanks!

Consumer routers/switches such as your D-Link generally do not support the enabling of directed broadcast packets, which are required for use with the wake on LAN feature, so that may be the problem.

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Onboard Broadcom LAN does not work: code 10 [Master3]

Hi,
OK, I finally get my K8N Master3 working - Opteron 240, Win XP SP2. But I can't get the onboard LAN to work.
When I turn on the PC I get this in the device manager: http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom1.jpg
and the error message is "device cannot start, code 10" : http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom6.jpg
I can disable the devices then re-enable them and this makes it look like it's all OK: http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom2.jpg
However, although packets are being sent and the network status shows packets being sent and received. I can't ping any computer on the network! I have tried using just 1 PC via a cross over cable (without the extra LAN cards listed in the device manager). But although it looks like it should all work, nothing gets sent.
This is the driver I'm using: http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom3.jpg
Initially, there is no MAC address for the ports. Windows just shows 0's in the connection status support tab.
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom4.jpg
So I assigned a value for the MAC address based on an existing Broadcom network card: http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/broadcom5.jpg
BTW. when I reboot, the broadcom controller is again listed as not working in the device manager.
Anyone with any ideas?
Adrian
p.s. if you can't see the links, the my WWW might just be down, it hangs every now and then :-(

OK, I've taken it out of the case and plugged one of the LAN ports into a laptop. The laptop is constantly pinging it and the server is pinging the laptop. Unfortunately it's the same as before. The broadcom controller(s) are not working when XP boots, giving a code 10. It is possible to disable them and enable them. This makes it look like they might work. Packets are received, nearly. The lights on the ports light up and the speed is automatically detected and set.
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless1.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless2.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless3.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless4.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless5.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless6.jpg
http://www.AdrianJudd.com/~AdrianX/photos/MSI/broadcom/caseless7.jpg
When I put the system back together again I placed the other LAN cards in different PCI/PCI-X slots. This caused the Intel card to give a code 10. When I swapped it back it was OK. Unfortunately, I can't swap the Broadcom controller around as it's on the MB. I also tried the SCSI card in different PCI/PCI-X slots. Finally, I now get a code 10 from my LSI MegaRAID card. So I'll have to re-install XP
There's not much I can do really. The screen shots above are the most basic setup I can have, ie. SCSI card and 1 SCSI drive (in the SCSI enclosure at the back). I've never seen a code 10 error before, and after taking the m/b out and putting it back in again, I ended up with 4 at once! I was thinking about maybe trying Win XP 64 bit.

Wireless LAN does not work after restart

Hey
My brand new laptop suddenly went blank earlier today and when I restarted it I noticed my wireless internet won't work. It is also asking me to install some new driver, the Network Controller? I am confused as everything was working fine and suddenly it's not. Anyone any ideas? :-/

Hi,
maybe you should try to install the driver for your wireless lan card. I mean, if some application damaged the driver or installed something which interferes with the wireless lan card then you should try to fix it with an reinstallation of the driver.
Heres a [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to the drivers download page from Toshiba. Pick your model and your operating system and download the driver which fits for your wireless lan card.
Greets

MSI E350IA-E45 Wake On USB does not work

I spent hours trying to get the computer to be able to wake from my usb devices. I enabled it in the bios and in the Windows 7 device manager. However, it doesn't work. The motherboard cuts off power to the USB when in S3 sleep mode. Has anybody been able to get Wake From USB working on this board or is it false advertisement?

Mine works with a USB mouse but not Bluetooth mouse.... My BT also has issues on cold start, until I jumped the 5volt pin to the 5v stand by on the power supply

OS X Restore with Time Machine via LAN does not work

Hi all,
i did a full backup of my mac mini with mountain lion on a time capsule via LAN. Tried to do a full restore on a new hard disk and connect to the time capsule after i booted into a restore environment. I was able to choose the time capsule as the restore source and connected using my dedicated backup user, which was also used to create the backup before. But after i cannot chose my just created backup!
Using a local USB disk with time machine everythings workes fine. But the main reason why i chosed time capsule is, that i can make my backups of all the used mac books and minis via LAN / WLAN...
So, is there anybody else experiancing this Problem?
Regards,
David

Hi,
tested OS X Restore with Time Machine via QNAP NAS Box - working without any problem. So with the Time Capsule it might be firmware problem?!
Will update thies Thread when i've any news...
David

EA 6500 - LAN Does Not Work

With the E4100 I can setup a LAN game of call of duty mw3 and 1 xbox can join the other, pretty simple, Ive always been able to do this with all xbox games that have LAN ability.
With the EA6500 I see the game is availible on LAN, but I can never connect to the game, it tries to connect and says cannot connect.
Any LAN settings Im missing here, or just another EA6500 bug to add to the list?

Theoretically, having two xbox connected to a single router may work based on the post of previous users but technically one router could only cater one gaming console. What you can do is perhaps to try to open the ports: tcp 3074 27014-27050, udp 3074 27000-27030; or to DMZ the xbox to the router.

Lan and WLan does not work on Satellite L40-18W

Hi all
I have TOSHIBA Satellite L40-18W and my problem 1- wireless not work & wired lan does not work.
I have download driver and every thing is ok but it does not work ( when i search by wireless i do not find any network. My router is working fine)
plzz help meeeee

Hi
Its hard to understand what you mean by not working.
What does this mean exactly?
Are you not able to connect to the internet or what?
Usually if the WLan card and the LAN card have been recognized properly in device manager then the drivers are working fine and the issue could be related to wrong router configuration or maybe to some enabled firewalls, etc
Firstly I recommend checking the router settings. Check if the router has been configured with the right data from ISP and if all other common options have been set correctly.
The notebook supports Realtek Wlan and LAN card.
Check if Wlan card uses the same WLan standard like the WLan router and if right encryption has been used too.

T500 Wake on Lan (wireless) does not work.

Hi,
I set up T500 (Windows 7 Ultimate 64bit) for wake on lan,
1) Enable Bios WOL
2) Enable WOL in power manegement tab of Intel WiFi Link 5300 AGN property in device manager.
But WOL does not work. Sending magic packet from a PC in the same WiFi segment does not wake up sleeped T500.
Are there any setting for WOL in lenovo tools ?
Does anybody use WOL(WiFI) on T500?
Thanks,

Is the T500:
Associated with an access point at the time it is put into standby/sleep mode?
Connected to AC power for the whole time it is in standby/sleep mode (in otherwords the whole time it is in a low power state) when you are attempting to use WoWLAN?
If not, that may be at least part of your problem, as it is a known limitation on WoWLAN operation.
You also need to have the laptop "set up" to the master workstation, and the WLAN configured to handle braodcast wireless frame, but I am presuming you have already done that side of things.
Cheers,
Bill
I don't work for Lenovo

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

Internet connection does not work when Macbook wakes up from sleep

I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
Thanks.

Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.

HT201401 How can i reset my iphone if the Sleep/Wake button does not work?

My camera shuts off every time that I try to take a picture. I would like to reset my IPhone in order to try and solve the problem. My Sleep/Wake button does not work.
How can I reset my IPhone without the Sleep/Wake Button working?
Thanks for the help.

When pressing the sheep/wake button, the iPhone's screen is not turned off if on and does not turn on if off, and pressing and holding the sleep/wake or on/off button does not bring up slide to power off?
And you can't do a reset by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?
If so and there is no change after restoring the iPhone with iTunes, make an appointment at an Apple store if there is one nearby since more than likely there is a hardware problem.

890GXM-G65 WOL Wake-on-LAN does not work

Similar Messages

Maybe you are looking for