My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
Thanks.

Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.

Similar Messages

My back button does not work because the prior screen does not appear in the history. I therefore must go back to the blue screen and reload safari. Apple tech support could not help. Can anyone else help?

After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

TS3274 ipad 2 will not charge and home button does not work. batter at 39% so cannot upgrade over wi-fi. What can I do?

my wife's iPad home button has stopped working, in addition it will not charge either through usb or the wall.
She uses it to read novels mainly and has not mishandled it.
Any help is appreciated.
Thanks
OM_CN

I realize that you said that the home button is not working, but try this anyway.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. See if the battery will show that it is charging after the iPad starts up.

My ipod touch start/reset button does not work and the ipod is stuck on the apple restarting logo. what can i do?

.

If that does not work, try the other actions specified here:
iOS: Not responding or does not turn on

HT4061 my iphone 4s is in a coma, my sleep button does not work and when i connect it to my charger nothing happens, help!

my iphone 4s unexpectedly stopped working, it wont turn on and my sleep key has not worked in months so i am unable to reboot the phone by holding the sleep key and home button . all i see is a black screen that is lit. when i connect it to the charger nothing happens. please help me!

There's no software fix for a hardware issue. Make an appointment at any Apple store, an out of warranty replacement is US $199 for an iPhone 4S. It that's too much money, find a third-party repair service. But, be aware, if a third-party touches your phone, you void all support from Apple & forfeit the right to an out of warranty replacement. Also, since Apple does not sell parts, there is no way to determine if any parts used to fix your phone are genuine or knock offs.

Form button does not work when a program is moved from Windows 8.2 to Windows 7

Hi,
I have a few Excel programs which use the ODBC to get data from Access and which have macros which writes data to an external program, MYOB.
When the macros tries to write the data to MYOB it fails if I am not running the program in administrator mode.   It seems that Windows 8.2 has a different level of security than Windows 7 and must be run in administrator mode for the ODBC to work.
I have had issues after running the program in administrator mode (testing) if I simply do a save (in administrator mode) and then send it to the customer.   The issue is that it just will not work on the customer's site.   I have gotten
around this in the past by saving any changes, going back out of excel, loading the program again (not in administrator mode) and saving it - before sending it to the customer.   This worked until now.
For some unknown reason, the last time I sent a program to the customer and carried out the above process, the program stopped working. Originally I thought that the macro just wouldn't work on windows 7, but eventually found that it is the form button
that will no longer work when the program is moved from 8.2 to 7.
Does anyone know why there is an incompatibility between 8.2 and Windows 7 and what I should be doing to ensure that my programs work in my customers environment(windows7)?
In the meanwhile, I have changed the form button to an activex button and the program works fine in both environments.
Thanking you in advance,

there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
try to
Close Excel
Start Windows Explorer.
Select your system drive (usually C:)
Use the Search box to search for *.exd
Delete all the files it finds.
Start Excel again
Open that file and save it, and try open at Windows 7
to get more detail about this issue, I suggest also contact Office forum
this case also will be solve installing kb3025036
good luck

My iPhone won't charge and the sleep button does not work, Please Help!

I woke up this morning and my iphone was dead. I have been using the assisted touch setting because one day for no particular reason my sleep button stopped working, so I can't even try a hard reset now. The phone never had a bad drop and the only way it could be water damaged is from being in a steamy bathroom. If anyone has a suggestion as to how to get my phone to work again, Please leave a suggestion!!
Thank you

It could be that your button has justy gone out. You may try getting compressed air to blow out any dust in there. If that doesn't work, you may have to get your button and ribbon replaced.

Ios 7.1.2 froze my iphone 5, cant reboot as my sleep button does not work! What do i do?

was updating my ios and then it went to white screen with the apple and loading bar. it loaded only near half way but then froze!
and i can not reboot it because my sleep button is broken!
not sure what to do now?

I had the same issue. Basically you need to get the phone to reboot. I suspect waiting for the battery to run out would do this, but I didn't want to wait for it. iTunes would recognize my phone when I plugged it into my PC, though the phone was still locked up during update (black screen with apple symbol and progress bar at around 1/3). I didn't want to go through the hassle of a full restore so I found a small Windows program called reiboot that was able to place my phone into recovery mode. Then it let me take it out of recovery mode, which caused the phone to reboot (i think other programs like tiny umbrella may do the same thing). After a reboot, it showed the update screen for a minute, then started up running 7.1.2 fine.

HT201412 sleep button does not work and iphone 4 is frozen and won't turn on

sleep button broke a while ago and now my iphone 4 is frozen and i can't get it to reset also it doesn't sink up with the computer
please help i miss my phone

There's no software fix for a hardware issue. Either replace your phone...Apple has an out of warranty replacement program, cost is US $149 for an iPhone 4...or go to a third-party repair shop & get your phone fixed.

Plz Help: ipod buttons do not work, but the scrolling wheel work normally

Hi everyone,
All the controlling buttons on my girlfriend's ipod nano 3rd gen do not work.
However, the scrolling wheel is still functional.
Everything works, except the controlling buttons (menu, play, prev, next)
Is there any possible reason or solution for this?
The ipod is a 8GB product(RED) one.
Any suggestion is appreciated.
Thanks

Welcome to the forums!
This sounds like a hardware problem to me. If it's under warranty, take it to an Apple store. If not, take it anyway. They still may be able to help. If they can't, you can try sending it away to a company that fixes iPods. However, this may cost more than it's worth. You may find yourself buying a new iPod.

HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

Back button does not work and homepage does not show on startup

My back and forward buttons do not work anymore. they just show grey and I can not click on them.
Also my home page does not show when i start firefox.
I reinstalled firefox 4 and then went back to firefox 3.6.16 and have the same problem in both versions.
Not sure what to do anymore
I just found out that when I open a second window everything works fine in the second window, but it still does not work in the first window.
When I close both windows the same thing happens. The first window my home page does not show up and the back button does not work, but the second window works normal. Including my home page.

Yeah, I am having the same problem (with 4.0 and earlier versions). It is really frustrating to say the least. I never thought I'd say this, but I might have to go back to IE if FF is going to be this useless. I noticed that you have to right click (instead of left click like it works in the real world) on the backwards/forwards buttons, and that is no less frustrating since my mouses backwards/forwards buttons no longer work with this new asinine button set up.

HT1430 My ipad mini is frozen in an app and the home button is stuck. Pressing down on the sleep/wake button does not give me the red slider to turn the ipad off. Is there any other way I can reset?

My ipad mini is frozen in an app and the home button is stuck. Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad? Can I remove the battery? and then put it back in?

barbarafromnl wrote:
Can I remove the battery?
No the battery is non removable.
Try a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT1430 How can you restart your iphone if your lock button does not work?

How can you restart or turn off your iPhone if the lock button does not work?

The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

Similar Messages

Maybe you are looking for