"A connection already exists..."
Hello,
I just moved into the dorms at my college last Thursday and am having problems with my iChat. I very rarely use AIM or anything like that but I started using it at the dorms to stay connected with others. However, two days ago it started giving me the message that, "A connection already exists from your computer's IP address. Only one connection per IP address is allowed."
I'm running this on a MBP C2D machine and I've never given anyone my AIM name/password in this dorm yet... so I don't know how this could be happening.
Any ideas?
Thanks.
Hi Matthew,
It will be your Screen name somewhere.
It can be another computer or another app capable of connecting with the AIM servers.
iChat 3 can be set to allow Multiple Logins of the same account.
Whilst logged out of AIM open iChat > Prefernces > Accounts section
Click on the AIM/@MAC name on the left.
In the Account Info tab click in the Allow Multiple Logins box.
Most people end up with this when they have home and work computers and forget to log one out.
or the try another AIm client and have it running at the same time (AdiumX, Proteus and others)
The same thing will happen if you set up an AIM transport in the Jabber side and use the same AIM side screen name.
10:55 PM Tuesday; January 9, 2007
Similar Messages
-
IChat connection alert - Connection already exists fr yr computer's IP add
I'm having a couple of problems connecting to anyone on iChat (which I have been able to successfully use in the past). First is the above error message ... can you help me?
Before that message started appearing, I simply was not seeing any buddies listed in my buddy list. (But they used to be there!)
And before the buddies all disappeared, I did have them there on the list but before that, they were all in grey (or with a circle and red line through them)
I guess i've been messing around w/a lot of settings to try to get this to work. Some advice would be very helpful!!Hi,
The AIM System Message can be answered with a "1" or a "2"
1 cancels what AIM thinks is your First login.
this could be another AIM capable application on this or another computer that has not been logged out. (it can also be your Screen name is logged in on another computer behind a routing device)
The message can be a little different if you are logged in at another location like work.
2 cancels the computer you are on.
iChat can be set to Allow Multiple Logins in iChat > Preferences > Accounts and after selecting the Screen name in the list on the Left make sure Account Info is the current tab and use the "Allow Multiple Logins" Check box.
For the rest see this FAQ
http://discussions.apple.com/thread.jspa?threadID=1462798
6:25 PM Sunday; May 25, 2008 -
Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
JustinTurns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages. -
My ipod touch wont connect to my already existing itunes, it doesnt even show that there is a device hooked up to it! i have windows 7 and I just dont know what to do
Start here:
iOS: Device not recognized in iTunes for Windows -
Error creation of JCO connection: System Already Exist
Hi Experts,
We have created the SLD connection to the ECC6.0 from the Portal 7.0.
Created one JCO connection using that SLD successfully for the Clinet 100.
Now we required to create one more JCO Connection for client200 also. But it is giving the Error that
System Already Exist.
How can we resolve this. When we create the JCO connection for one client, con't we create one more JCO connection for the same system for the differt client or not?
If so How do it?
RegardsI think you can add one more client in the existing connection. well, I am not sure about that even.
nikhil -
Subversion - a repository connection with the supplied URL already exists
Hi all!
OS: SuSe 9.3
jdeveloper:jdevstudiobase10131
I need to create three repository connection to the same URL, with different user but jdeveloper doesn't give me any chance to do it. Returning the following error:
Could Not Create Connection
A repository connection with the supplied URL already exists.
Any idea here?
Thanks
Gilberto
Message was edited by:
gilbertocaYou might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
Amit -
Error: Source system already exists. Message no. RSAR201. Points rewarded.
Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1. Choose Modeling.
2. Choose Source Systems.
3. Select SAP in the window on the right.
4. Choose the Context menu (right mouse click).
5. Choose Create.
6. Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8. In the dialog box Please log on as an administrator in the following screen choose Continue.
9. Log on to the Source System with your administrator user. Choose the correct client.
10. On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten PoldHello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian! -
Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.comhi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can't connect to existing wireless network
I have a Qwest wireless modem (model 2701hg-d) and am trying to set up the Airport Express (AX) to use already existing wireless network wirelessly (ie without the ethernet cable). Is this possible? Do I need a wireless router instead?
In order to set it up I have the AX plugged into the modem via an ethernet cable. I have reset the AX and then run the Admin Utility. Once it recognizes the AX I then go to the Airport tab and select 'Join an Existing wireless Network (wireless client)' and then enter in the Network Name exactly as it is spelled in my modem configuration. I check the 'Internet' tab and it says connect using: Wireless Network and the 'Network' tab is grayed out. Then I hit update and the admin utility no longer lists the AX and the AX light is blinking amber. Not sure what is going on. I am using v6.3 of the firmware. I have read the posts extensively and am wondering if my modem is not capable of handling this?Hi
Not exactly certain if your situation is like mine, but you could check out this previous post:
http://discussions.apple.com/thread.jspa?threadID=917767&tstart=0
If you are trying to achieve wireless bridging then I don’t think APX will work with that particular router.
HTH -
Already existing tables in oracle 10g problem
Hi, i am new to oracle and just installed oracle 10g, my porblem is that when i ran the query i got an error.
SQL> select *
2 from emp;
from emp
ERROR at line 2:
ORA-00942: table or view does not exist
As emp table already exist in database but it does not show result. please help me. Thanks.i have heared form someone that i should copy some text (from files) or some files which resides in bin folder (i don't know the exact path) in the sql console to access existing tables. is that ture?Not sure what that means... to access existing tables, or to create new ones you have to use Sql commands (or some graphic stuff).
What about reading some documentation ?
System user is a DBA, and can possibly read any tables, but most probably is not the owner of emp table. To know it you can do
SQL> select owner from dba_tables where table_name='EMP';
then connect to that user, or, as system user, do
SQL> select * from <owner>.emp; -
Airport Base Station - setting up base station to already existing network
Hello,
I just replaced a network switch on the network. Since I did that I am unable to get Internet connection from our main base station in the server room that distributes the IP addresses. I did a reset to the base station and tried to get it to show on the already existing network, but I'm having some issues getting the base station configured with the other base stations on the network. How do I get this main base station to show up on our network?
Right now our other base stations are not getting valid IP addresses. The base station that is setup to distribute IP addresses is getting valid addresses from our provider. If someone could give me any suggestions I would appreciate it.
We are running Apple 10.2.4 on our network.OK - starts to make sense now. If you did a factory reset of the base station then more than likely the airport network name for it is the Apple default name, and you probably lost the WDS in Wireless Mode.
Do you know the old network name and the network password? Do you know how the other 4 or 5 base stations were configured - ie as a WDS network and whether as relay or remote base stations. You should not need to change anything on these base stations if you know how your AEB (main) was setup in the first place.
One step back from this, you need to confirm that the DSL modem is connecting to your ISP. Connect the ethernet cable from the DSL modem to your Mac and confirm that you can log onto your ISP or internet. If it works then lets go onto the AEB you reset.
Apple publish setup manuals for their AirPort Base Stations - they can be downloaded at: http://support.apple.com/manuals/#airport
1. Reset your AEB to its factory default again.
2. Turn-off the AEB and connect one of its ethernet ports to your Mac by ethernet cable, and connect the DSL modem to the WAN port on the AEB by ethernet cable.
3. Power up your Mac, the DSL modem and the AEB and wait for all to complete their startup sequence. Then open AirPort Utility - you should see your AEB under a generic network name. Click on the AEB.
4. Use the auto setup procedure by clicking 'Continue'. Follow the onscreen instructions for setting up a new network. When asked, use the 'original network name' for your school network. When asked for a network password, use the 'original network password' for your school network (what sort of network security were you using - WPA2 Personal - use whatever you had previously.
5. At some stage you will also be asked to give the AEB a name and admin password - use whatever they were previously.
6. When the setup procedure is complete and the AEB finishes restarting, the AEB will reappear in AirPort Utility. Click on the AEB and click 'Manual Setup'. You may be asked for the admin password to get into the configuration profile.
7. Click on the 'Wireless' tab and set the 'Wireless Mode:' to 'Participate in a WDS network' if not already set to this. While in this pane, look at 'Channel:' - do you remember what this was set to previously (if not, you may need to connect one of the other AEBs by ethernet cable to a Mac and use AirPort Utility to check the Channel setting.
8. Now, click on the 'Internet' icon at the top of AirPort Utility. Check that 'Connection Sharing:' is set to 'Off (Bridge Mode)' - if not, change it.
9. Now, click 'Update' and wait for the AEB to restart.
10. Now, disconnect the ethernet cable from the Mac to the AEB ethernet port.
11. Open Airport Utility, and hopefully, you can now see the AEB and the other 4 or 5 base stations.
Let us know what happens. -
"Already exists on the server"
I'm an old holdout on iWeb, still using it in November 2013. Since the Mavericks upgrade (I'm pretty sure that's when my problem started), after I publish, save, and quit, when I open iWeb up again, all the pages are red (on the leftside menu of pages), as if they're all changed and unpublished, even though neither is true. That's fine, but then when I make changes in iWeb and go to "Publish Site Changes," iWeb connects with my web hosting service and then gives me this message: "A folder with the name "Site" [this is my website's name in iWeb] already exists on the server. Do you want to replace it? Replacing it will completely overwrite the current contents of the folder on the server." Then I have the options of "replace" and "cancel." When I click "replace," iWeb uploads my entire website to the server again, and not just the parts that are changed. It's like, somehow, my web hosting service is making no connection to me as it used to. That is, it's treating me and my new content like it's all brand new and foreign. This is problematic because I have lots of video and audio content on my site, so the publishing of the whole site takes hours and hours. Once it's published, all's well online with my site, but how do I get iWeb to not republish the whole site again? Anyone know what's going on? Thank you!
Yes, "should" is the right word! As you suggested, I published the entire site, but when I then quit iWeb and reopened it, same thing: all left-column pages were red and the website & iWeb gave the same message ("A folder with the name "Site" [this is my website's name in iWeb] already exists on the server. Do you want to replace it? Replacing it will completely overwrite the current contents of the folder on the server.").
I suspect Mavericks is interacting with iWeb in some unanticipated way. That's certainly a guess. Any other thoughts/suggestions? Thanks! -
File 'Form1.resx' already exists in the project
Dear Everyone,
Could you help me to solve the File 'Form1.resx' already exists in the project. when I put my form under a sub folder?
I tried to copy the 'Form1.resx' from project base folder to the sub folder, the Visual studio 2010 C++ complied but the software hang at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
I am using Visual studio C++ 2010.
Here is an explanation from someone with the same issue:
"if you create a new Windows Form in a C++/CLI application and choose to save the .h and .cpp files in a location other than the project folder - for example a sub folder below the sub folder - the form gets created ok, but when you try to change
anything on it you get an error message saying:
"Could not find the file: <path_to_project_folder>\<subfolder>\<form_name>.resx"
If you try to save the changes you get another error message saying:
"File <path_to_project_folder>\<form_name>.resx' already exists in the project."
followed by another error message:
"Error HRESULT E_FAIL has been returned from a call to a COM component."
Regardless of where you save the .h file, Visual studio creates the .resx file in the project folder and then looks for it in the same folder as the .h file, and can't find it!"Hi Shu Hu,
I followed you suggestion and the issue was still there. I got the software crashed at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
Here are my steps:
1. Create a subdirectory
2. Add new form under new sub-directory
3. Change form icon from "Properties" tab
4. ignore error
5. copy the *.resx from the root of the project to sub-directory
6. close and reopen the project
7. remove *.resx from project Solution
8. Add *.resx under sub-directory to Header Files
9. Add some code to call the form.
10. Build & run
I saw this issue reported at least since VS C++ 2005 and it seemed there is no fix.
I tried these steps to reproduce this issue. But my project works well on my side. According to your application hang at : "this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));"
I guess you may forget one step, could you try open the .resx file and click add resource -> add existing file. I guess your icon file didn't embed in resx file.
How to report this issue to Microsoft development team so they can fix it?
I cannot reproduce this issue. If you have a sample to reproduce this issue, you could submit this issue to
microsoft connect. I am also glad to test your sample on my side, and you could share it on a public Onedrive folder with me.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Database Adapter Configuration Wizard "File already exists" error
I'm uding JDeveloper 10.1.3.1 on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
Does anyone have any suggestions?I am facing the same issues.
I want to pick the new files and retain the files after polling.
Any idea on this would help me to solve this issue.
Thanks in advance. -
FTPEx: 550 : Cannot create a file when that file already exists.
Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
AnilThere seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM
Maybe you are looking for
-
I am having a problem with mail. I am attempting to trash junk mail. Each time I do this and a while later I find the junk mail has not been discarded and is back in junk mil folder.
-
My iWeb site hosted on PowWeb not showing up with old URL - CNAME issue?
Since Apple migrated my .mac account to MobileMe, the site I was updating and hosting on PowWeb shows only the old uncorrected site. When I publish the URL I get a weird MobileMe URL which doesn't work well as people are used to the original URL. Ver
-
Hi, Is there any standard SAP P&L report ? We need separate Balance sheet report and P&L report. Regards Pratap Moderator: Please, avoid asking basic questions
-
Since updating to FCPX 10.0.6, Both Titles, Transistions and Gernerators that came with final cut and one's I have made myself do not allow me fill a Drop Zone with video. It fill's the drop zone with a Still from the last frame of the video clip I
-
How to save metadatas in RAW files (and not in external .XMP sidecar file)
Hello, I would like to save metadatas (for example keywords) inside the RAW files, and not in external .XMP sidecar file. How to do this in Lightroom ? Thanks Josh PS: is XMP a file format (= .XMP files) or a metadata format that can be embedded eith