Database Adapter Configuration Wizard "File already exists" error

I'm uding JDeveloper on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
Does anyone have any suggestions?

I am facing the same issues.
I want to pick the new files and retain the files after polling.
Any idea on this would help me to solve this issue.
Thanks in advance.

Similar Messages

  • EXPDP generates new dmp file and reports "file already exists" error

    Hello everyone,
    Hope you all had a wonderful holiday. I got some problems with datapump expdp It would be appreciated if you could provide some advice. Thanks in advance.
    I newly created a database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
    expdp parfile=expdp_scott_mfp1.parExport: Release - 64bit Production on Monday, 26 December, 2011 22:10:49
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release - 64bit Production
    With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
    ORA-27038: created file already exists
    Additional information: 1
    Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
    Your advice is highly appreciated.
    Edited by: 904668 on Dec 27, 2011 8:47 AM

    i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

  • HT1904 Unable to create temp folder when file already exists Error 183

    Unable to access itunes store. Checked all trouble shooting hints on apple site.  The administrator account works, but none of the other users are able to access the itunes store, since updating to the latest version of itunes.

    Could you walk us through what happens when one of the non-admin accounts try to connect to the Store, please?

  • Adobe workbench errors on checkin:  Asset already exists / file already exists

    Adobe workbench for Myserver checkin gives errors:  "Could not create the asset because the asset already exists" and/or "File already exists in global store with that name".  How does one fix this? 
    This seems to especially happen when I change login to workbench user/configuration/"mode" etc.

    If worst comes to worst:
    Save relevant directories in completely separate windows backup directory path.
    Remove all sub-folders from LC workbench (everything below the /1.0 leaf).
    Restore directories from backup path.
    This seems to ALWAYS work.

  • Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

    Hi There,
    All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
    Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
    Some of the specified files already exist in the target location. The files marked below will be replaced:
    We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
    All machines are new Quad-core MacPros running:
    - Leopard 10.5.8
    - Illustrator CS4 14.0.0
    We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
    Is anyone else experiencing this behavior?
    Any help or pointers in the right direction would be much appreciated.

    Thanks for the reply.
    The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
    Why do we still use eps?
    Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
    Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
    But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
    Cheers, and thanks for the help.

  • Having trouble downloading a free trial of adobe acrobat xi pro - error keeps saying that an adobe file already exists

    I'm trying to download the application Adobe Acrobat XI pro - but every time I go through the download process, it comes up with an error that says it can not download because an adobe file already exists in the folder.  I don't have XI Pro downloaded.  Any thoughts?

    Update... Derp... Had it already loaded and didn't even know it..

  • Import from scanner give error message "This file already exists in this catalogue"

    I can import from the scanner occasionally, but often times get this error message.  " this file already exists in this catalogue" and the scanned picture is discarded.
        I see others have had it as well, but no solutions were posted. I'm running Photoshop elements 11 with all current updates.

    Thanks for the reply. My Image wasn't in a version set however.   I scanned a new photo which was successsful. I then scanned a second photo different from the first, which failed.  I think possibly the software for my HP scanner is at fault, since it always names the scans as image1.jpg. It doesn't give an option to increment successive scans to a different name which probably caused the problem.

  • Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

    It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
    Windows 7 Ultimate 64bit,
    Intel Core i7-2600K Sandy Bridge 3.4GHz,
    CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
    G.SKILL Ripjaws X Series 16GB,
    EVGA GeForce GTX 460 (Fermi) 2GB ,
    Matrox MXO2 with MAX,
    COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
    Adobe CS 5 Production Premium
    thanks in advance

    Thank you ram8kumar. I will answer step-by-step, as you did:
    - there is no subtitle in the project
    - .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
    - Disc name is not blank
    - there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
    Lest two might be the problem.
    - I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
    - Audio and video  track duration in the timeline was 1(one) frame  difference.
    Thank you agan, and I will post the results as soon as I will get done with it.

  • The cluster service terminated, error 7024, cannot create a file when that file already exists

    I have a test 2-node Failover cluster using Server 2012 R2
    As of last night the cluster service on one of the 2 nodes is down with this error:
    The Cluster Service service terminated with the following service-specific error: 
    Cannot create a file when that file already exists.
    EventID 7024
    The Cluster service waits 60 sec, tries to start, and the same error occurs again. 
    Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
    thank you.

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.

  • File already exists in catalog error message

    When trying to scan a photo into the PSE 8 Organizer, I get the message "The file already exists in the catalog".  It indicates the file c:/users/user/AppData/Local/Temp/PSAlbumImport/2014-02-23-1315-04/Image1.jpg.  This file contains the image that I scanned in but it won't import into the Organizer.  I now have several scanned photos with this problem, all in different directories.  How can I fix this?

    My scanner software requires me to scan to photo software when scanning slides or negatives so the folder suggestion does not work.
    I have found a work around . I now scan into the organizer of my PSE 5 program which then shows up in the browser as new files when I open PSE 9.
    The PSE 5 program will scan all 4 slides without any problems. This didn't fix the problem in PSE 9 but I can get my scans done.
    I just wish Adobe support would get off their *** and respond to problems. I emailed them a week ago and have not received any response.
    Thanks for your response.

  • Cannot create a file when that file already exists, but should overwrite

    I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
    for eg., Sender side : Yeswanth.txt
    and also receiver side   :  Yeswanth.txt
    but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
    Processing parameters i has given on Receiver side:
    File Construction Mode  :  Create
    put file  : Use Temporary File
    and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
    Error getting receiver side at communication channel :
    Message processing failed. Cause:
    Yeswanth.txt: Cannot create a file when that file already exists. : 550
    Yeswanth.txt: Cannot create a file when that file already exists.
    Reward points for useful answers.
    Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.

  • FTPEx: 550  : Cannot create a file when that file already exists.

    Hi experts,
    I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
    In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing  Error message.
    ' Delivering the message to the application using connection File_ failed, due to: An error occurred while connecting to the FTP server ''. The FTP server returned the following error message: ' 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
    and this error message is not displayed for all the target files , some files are getting created succesfully.
    After some times , the file in error status , gets created automatically.
    What may be the reason.?
    Thanks in advance .
    Best Regards,

    There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
    14.      Select the File Construction Mode.
    u25CB       Create
    The file is created. The document received last is saved in each case.
    If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
    You can only set the indicator if you select Use Temporary File under Put File below.
    Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

  • Group file already exists

    Can someone please explain what causes this error:
    OCA-30023: error fetching result set
    [POL-3253] group file already exists
    I am using Oracle Lite 8. I have created a view that returns all records from a table with the related data from other tables. Whenever I use this view in a query, adding a where clause with a date range, I get the above mentioned error. This only happens when the database is open in another application. If I use the view in a query without a where clause, it works fine, but I get more data than I want to view. The view is shown below.
    Thanks for any info.
    John Valentino
    create view EventViewEx
         (EventIndex,LogDate,Tool,ModuleId,Module,Type,Event,StrDesc1,StrDesc2,StrDesc3,StrDesc4,IntDesc1,FptDesc1,UserName) as
    select     Event.EventIndex,
    from     Event,
    where     Event.ToolIndex = Tool.ToolIndex
    and     Event.NameId = Names.NameId
    and     Event.ModuleId = Module.ModuleId
    and     Event.UserIndex = Users.UserIndex;

    Thanks John. We downloaded the omwb13100 zip file.
    Instead of using the default repository, I tried to log-in to a database on the local NT machine to recreate a new repository. Everything went fine afterwards.
    We're all set for now but it would be nice to find out what happened to the default repository. Thank you.

  • Restore (file already exists)

    1-)Why does restore fail in below scenerio?
    2-)'C:\TEST.DBF' datafile is not in my backupset,Why oracle attempts to restore it?
    rman target /
    Recovery Manager: Release - Production on Sun Jul 26 12:29:42 2009
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: XE (DBID=2563855341)
    RMAN> backup database;
    Starting backup at 26-JUL-09
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=38 devtype=DISK
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00003 name=C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF
    input datafile fno=00001 name=C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF
    input datafile fno=00002 name=C:\ORACLEXE\ORADATA\XE\UNDO.DBF
    input datafile fno=00004 name=C:\ORACLEXE\ORADATA\XE\TEST1.DBF
    input datafile fno=00005 name=C:\ORACLEXE\ORADATA\XE\TEST2.DBF
    input datafile fno=00006 name=C:\ORACLEXE\ORADATA\XE\TUNTEMP.DBF
    channel ORA_DISK_1: starting piece 1 at 26-JUL-09
    channel ORA_DISK_1: finished piece 1 at 26-JUL-09
    726T122957_56R8JRNJ_.BKP tag=TAG20090726T122957 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:02:18
    Finished backup at 26-JUL-09
    Starting Control File and SPFILE Autobackup at 26-JUL-09
    piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_5
    6R8O2N0_.BKP comment=NONE
    Finished Control File and SPFILE Autobackup at 26-JUL-09
    C:\Documents and Settings> sqlplus / as sysdba
    SQL*Plus: Release - Production on Sun Jul 26 12:32:44 2009
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release - Production
    [email protected]> create tablespace test datafile 'C:/test.dbf' size 3m;
    Tablespace created.
    [email protected]> shut immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    RMAN> restore database;
    Starting restore at 26-JUL-09
    using channel ORA_DISK_1
    creating datafile fno=7 name=C:\TEST.DBF
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 07/26/2009 12:41:17
    ORA-01119: error in creating database file 'C:\TEST.DBF'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already existsIf I restore old controlfile, it again gives the same error,old controlfile doesnt aware of the new tablespace, and this new datafile is not in my backupset. so why it gives this error?
    RMAN> restore controlfile from autobackup;
    Starting restore at 26-JUL-09
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=35 devtype=DISK
    recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area
    database name (or database unique name) used for search: XE
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: control file restore from autobackup complete
    Finished restore at 26-JUL-09
    RMAN> restore database;
    RMAN-03002: failure of restore command at 07/26/2009 12:41:17
    ORA-01119: error in creating database file 'C:\TEST.DBF'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists

    Hi Bobo Dasilva,
    What you showed according to your output is you created an autobackup without the info on the datafile called:
    Than you created the tablespace which implictly created a new controlfile autobackup because you changed the structure of the database.
    This last controlfile autobackup is than used by the restore process which is the reason the controlfile is aware of the extra added datafile.
    Best would be to to force the restore of the controlfile from O1_MF_S_693232337_56R8O2N0_.BKP if you want the controlfile not to contain the info.

  • "file already exists"

    Hi there!
    Photoshop CS4 gives me a strange error. When trying to save a psd file as a jpg (using "save as"), it doesn't change the extension when selecting jpg from the format drop down menu. This results in a message, saying that the original file already exists, or when I save it to a different location, I get a psd file with jpg algoritm. Anyone any idea?
    I'm using XP SP3. Other programs do not have this issue. For instance, when working in Adobe Acrobat, and trying to save a pdf in the rtf format, it correctly changes the file extension, and saves the file as rtf.
    Thanks in advance!

    TurboPriest wrote:
     The problem must either lie with Photoshop, or a combination of Photoshop on my XP configuration.
    Most probably, since I don't get that problem. Maybe try installing the 11.0.1 update (if you haven't yet). If that doesn't work, then try to figure out the extent of the issue.  Try PS in a different Windows user account (create a new one), and turn off the unnecessary stuff that runs in the background on your computer. If you're not familiar with msconfig, then see this document for turning of background stuff:
    Let us know if either of these change the situation, and hopefully we can help you out from there.
    Also, have you installed any plug-ins for PS? Maybe one of these is interfering with Photoshop's jpeg plug-in somehow. Check out this document:

Maybe you are looking for

  • Logical System for RFC-Business system?

    Hi, I want use RFC adapter for my scenario like File to RFC. The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel. Regards Gopi

  • Trouble playing webm formats on android

    Usually the error is: No video with supported format and MIME type found. I have plugins disabled. Occasionally the webm will show the first frame, but never actually plays. Even after pressing pause then play. The video is html5 and in webm format.

  • Number function issue

    Hello all....... dears i have a numeric column and i want to round numbers like (0.2100 till 0.2599) become 25 and (0.2600 till 0.3099) become zone of 30 and so on. as follow: (0.2100-0.2599) become 25 (0.2600-0.3099) become 30 (0.3100-0.3599) become

  • Interested in bringing Past Due forecast from MRP Forecast Sets to ASCP

    We are on 12.1.3 (EBS and ASCP) and are interested in bringing a week of past due forecast from MRP Forecast set into ASCP. We are running EDD plan. Following have been enabled but no luck yet, open to suggestions or explanations. 1. Include Past Due

  • Blocks corrupted

    Hi, I got below output from one of my databases, are these below blocks corrupted? if yes, could some one please send me the recovery steps (through RMAN). SQL> select * from v$database_block_corruption; FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPT