A friend recommended Photoshop to me.  I need to resize photos.  The webiste has so many flavors.  I think I need just plain Photoshop.  When I click that, I get shotoshop CC.  I have zero desire to use the cloud for my photos.  I just want to run the pro

I just want to install photoshop to my PC so I can edit photos.  Does anyone have the link to do this?Photoshop General Discussion

Photoshop CC is not cloud based. It is installed from the cloud, but stays and runs on your computer. Where your files are stored as well.
For a beginner, you may be better off getting photoshop Elements as it hold your hand a bit to help you. Where as photoshop CC does have a steep learning curve since yes it is for pro's as well as those that want to take the time to learn it.

Similar Messages

  • We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

    We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
    I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights". 
    There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
    We are in an enterprise environment and users simply do not have administrative rights on the computers.
    I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
    Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
    Any help or suggestions are greatly appreciated.

    Jeff,
    Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
    The apps do not load with their current standard user permissions.
    The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
    This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

  • I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoint​s along with text box. Can anybody help me in this? Thanks.

    I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

    Thanks for you reply.
    But actually I don't want to show the \ (backslashes) to the user in my text box. 
    Ok let me elaborate this problem little more. 
    I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark). 
    Regards,
    Waqas Ahmad

  • Can I use Creative Cloud for students on more than one computer at the same time?

    I get different info when I read about how I could use creative cloud.
    Somewhere it say I can install and activate on two computers but only run the applications on one computer at the time.
    On antother place I read that I can use the applications on two computers at the same time.
    So what is correct?
    Can I install and activa Creative Cloud for students on my PC and my Mac and also run the applications on both computers at the same time?

    I already gave you the info you seek, but you don't seem to want to accept it.  Here it is in writing from Adobe's EULA (find it at: General-terms)
    "4.1 Subscription-Based Software License.
    If we provide the Software to you as part of your subscription to use the Services, then subject to your compliance with these terms, we grant you a non-exclusive license to install and use the Software: (a) in the Territory, (b) so long as your subscription is valid, and (c) consistent with these terms and related documentation accompanying the Software. “Territory” means worldwide, but excludes any U.S. embargoed countries and countries where you are prohibited from using the Software or the Services. You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation. However, you may not use the Software on these devices simultaneously."
    You appear to want to believe that because you think you have a way of getting around the agreement without being caught it would be okay to do.  You are bound to the agreement if you purchase the subscription.  Do you understand what intentionally (and with fore-knowledge) failing to honor a contract constitutes?

  • I use I cloud for my contacts, etc. but want to use computer for music.

    I use the I cloud for my contacts etc., but don't want to use it for music and movies.  But when I manually try to sink the iphone, it says it will erase the content and replace it with the new content on my work computer.  Will this destroy all info or just the music? 

    For me all of my data and backups are done through iCloud, but it still lets me sync to iTunes no prob. I would turn off Music and anything else you want on the iCloud menu on the iPhone, and then when you plug in to iTunes instead of saying iCloud backup say Computer backup.

  • When I crop a photo on my iPad the photo becomes a bunch of pixels and doesn't go back to normal even when I click return to normal?  Anyone else have this problem?

    Started after I updated to iOS 5.1

    Art,
    I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
    Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of  'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
    I hope someone will be able to confirm how that can happen...
    Edit;
    I have just read Brian's post.
    That may be the difference...

  • Does anyone know how to turn of the pop-up iCloud log-in window on iPhone. I have no desire to use iCloud. I have turned off iCloud in settings but the pesky little critter is not deterred.

    Does anyone know how to turn off the pop-up iCloud log-in window on iPhone 5c. I have no desire to use iCloud. I have turned off iCloud in settings but that does not seem to deter the pesky little pop-up from continually asking me to log-in
    Thanks

    Pop up usually meant that icloud activation lock is still on on Apple servers. In order to deactivate you need to turn icloud back on by signing in and then sign out properly. For your sake I hope that you know the password.

  • HT201318 Hello. I have just built a website using iWeb but cannot upload it. I curently have the 25gb account. There doesn't appear to be any facility here for the net. ASm I correct in thinking I need an upgrade, or am I doing something wrong?  Thanks

    Hello. I have just built a website using iWeb but cannot upload it. I curently have the 25gb account. There doesn't appear to be any facility here for the net. Am I correct in thinking I need an upgrade, or am I doing something wrong?  Thanks

    iCloud does not provide website hosting. You will need to find another website hosting service - there are many to choose from - and upload your site there. How you do this depends on what version of iWeb you have.
    In order to upload your existing site in iWeb '09 and above:
    Click on the name of the site in the sidebar: the publishing settings pane will open. Set 'Publish to' to 'FTP'. Enter the name of the site and a contact address (if desired).
    In the 'FTP Server Settings' section you will need to know the server address (your hosting service can tell you that), and your username and password for that service. Your site will be published in a folder with its name at root level of the server, with an index.html file at root level (which will overwrite any index.html file which may be there already). The 'Directory/Path' field may need to include a path such as '/webspace/' or 'ht_docs/' - this is dependent on your hosting service and they should tell you this. If you want to publish within a folder you can add that to the path.
    You can then click the 'Test connection' button so that iWeb can check that it can get access to your server space. You should enter the URL of the site in the 'URL' field so that rss feeds and internal links have the correct address.
    To publish using an earlier version of iWeb:
    From the File menu choose 'Publish to a folder'. You should create a folder somewhere convenient specifically for this and choose it when publishing to a folder: this folder should not contain anything else.
    You now need an FTP program (FTP is the 'protocol' used for uploading) to upload the contents of the folder to your server.Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service. You can drag the contents of your folder to your webspace, or create a folder there and drag the contents to that if you prefer.
    Some facilities that iWeb provided when hosted on MobileMe will not work on other servers: comments on weblogs and photos, password-protecting your site (some hosts may provide this), searching in the weblog, and a hits counter (again, some hosts can provide code for this). Slideshows in iWeb will work on other hosts than MobileMe (they use different code when FTPing which doesn't depend on scripts hosted on MobileMe as the MobileMe version does); however there is an issue with the 'buttons' which control the slideshow which are images hosted on me.com - these depend on images which used to be hosted on MobileMe. The poster 'Old Toad' on the Apple Forums has provided a workaround, described at http://oldtoadstutorials.net/No.26.html.

  • HT204150 I have a Mac 10.5.8 op system.  My Contacts do not syn with I cloud.  Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book.  How do I efficiently merge the duplictes that are now on I clo

    I have a Mac 10.5.8 op system.  My Contacts do not syn with I cloud.  Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book.  How do I efficiently merge the duplictes that are now on I cloud?

    You cannot use iCloud with Leopard 10.5.8. The minimum requirement is Lion 10.7.2. If you have been syncing your contacts with iCloud you can only have been doing it by some sort of unsupported hack, and if it doesn't work it's unlikely to be possible to find an explanation. If you have been using other (compliant) devices by trying to sync using both iTunes and iCloud you are likely to get duplicates.
    A computer old enough running Leopard may well not be upgradeable to Lion or Mountain Lion, but if you can do so this is the only way you are going to be able to make proper use of iCloud.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • I have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. show i buy a new snow leopard disc fromapple

    i have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. should i buy a new snow leopard disc from apple and install that as my new operating system. please help as had the computer a month now and still cant use it yet.

    You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

  • Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

    Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
    Thank you

    Please refer to Creative Cloud Help | Creative Cloud / Common Questions
    CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
    You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
    Regards
    Rajshree

  • HT5538 Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password

    Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    Just create a new AppleID for your work.
    As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
    However, you can put items purchased on on account onto the other iPhone.

  • I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon it shows I have over 11,000 unread emails. I have no emails and am not receiving any. Ipad shows I am receiving emails ok. Om my phone deleted folder is empty as well as Sent.

    I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon in red it shows I have 11,193 emails to be read.  I have no mail in Inbox, Drafts, Sent, or Trash. Where did this come from and how do I get rid of it. The number is printed in read on top of the blue and white emaiI icon. I contacted my cable company and through their website I can check my email. In doing this it showed I had 25 unread emails. Also, my iPad 2 is receiving emails fine.  So the problem is with the iPhone 4. What can I do to get rid of the number and make my mail operational? 

    Hello Kizzyk,
    I would start with taking a look at the settings to make sure that you are able to send and receive messages. If everything looks good then the next step would be to remove the accounts and add them back in. Take a look at the article below for more information and details on how to troubleshoot your issue further.
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/TS3899
    Regards,
    -Norm G. 

  • Ive had my iPod classic for some time now, and up to now have been using my laptop to sync songs from iTunes.  Unfortunatley, the laptop has died and I'm thinking of buying a iPad.....but how do i now get any songs downloaded from iTunes to my iPod?

    I've had my iPod classic for some time now, and up to now have been connecting it to my laptop to sync any downloaded tunes from iTunes.  Unfortunately, the laptop has died and I'm thinking of buying a iPad.....but how do I now get any songs downloaded from iTunes to my iPod?

    If an iPod is set to update automatically it will be associated with a particular library. If you connect that iPod to a different computer or a different library on the same computer you get the the message you are referring to. "The iPod "iPod Name"is linked to another another iTunes music library. Do you want to change the link to this iTunes music library and replace all existing songs and playlists on this iPod with those from this library". To use an iPod on multiple computers you change the update method to "manually manage songs and playlists". You can also use multiple iPods on a single computer so you will be able to connect both of your iPods to your existing iTunes. Connect the new iPod and follow the on screen instructions, iTunes will open and update your iPod.
    For info:
    The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
    1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
    2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
    3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

Maybe you are looking for

  • Freight cost estimate - Shipment

    Hi I m new in shipment, please help me. When I make the simulation (Freight cost estimate) in transaction VT02N the Net Value that shows is different to the real net value when the shipment is ended. This happen because in the u201CItem conditionsu20

  • ICLCDC01-Problem in Claim Creation

    Hi, I am in the process of creating claims; for the same I am using the transaction ICLCDC01. In this transaction I pass the Policy Number; Incident Type as the header data and I create a subclaim for the same. After entering the payment details and

  • How to change tranformations

    hi experts i ahve one ticket to resolve i have saloffice and it has attributes customer, division, slaes org distributionchannel and i have logic in transformation IF SOURCE_FIELDS-PVKBUR = 'HQ' OR SOURCE_FIELDS-PVKBUR ='HOSE' OR SOURCE_FIELDS-PVKBUR

  • Two computers in use?

    Elements 9 keeps telling me I have installed PSE9 on two computers which is correct, but it will not run on my laptop; one of the two users above. Keeps asking me to deregister one machine and reload. Any ideas or comment.

  • I don't have the Firefox in a orange tab on top left of page, looks like there are tabs across top blured in background

    my browser page does not look like shown on web site. Ok on other laptop and desktop, only this laptop with Window7. it was ok until last week. looks like older version of firefox. missing orange tab, top left, with firefox in it. looks like several