A nice solution with MPC 180
:like:I've recently bought an Mega PC 180, but was dissapointed when I tried using it as a PVR, wich was my number 1 use for it, and after reading theese forums I started becoming really sad, paying so much for something that did not seem to work.
However, I did not give up, after giving all this money, another few coins wouldnt matter, so I located 99% of the problems to be related to the tuner card, so I bought a new one, Pinnacle PCTV Pro, and replaced the MSI TV tuner. Reinstalled windows, and just installed the nescessary drivers for the box, no additional junk as Media Center and such, cause all this software bundled with the mega pc and the tuner card was so buggy it was near unusuable . Installed and tried some third party PVR-software, and my favourites are CyberLink Power Cinema and SnapStream Beyond TV 3.
And...
It all works perfectly!!
Cant use the remote to navigate the software in pc mode, but what the heck, I have a pretty nifty wireless trackball that does the job and much more.
So now, I looove my Mega PC 180
Very much one of my best buys ever, it's great, and cool looking!
Conclution for everyone who had the problems I had, think about other tv-tuner cards, the msi tuner is very cheap, and you get what you pay for, usually.
The MSI Mega PC 180 is a great product IMHO, but the TV Tuner card I cannot recommend, otherwise, no complaints.
/Emma out
PS. My setup:
Mega180 Deluxe;
120GB Samsung Spin P80
2x 256MB PC333 DDR Original Kingston PC2700 CL2 (Hyper X)
AMD Athlon XP2800+ Barton - 333MHz / 512KB
Lite-On Intern IDE DVD±RW 8x - Black Front
Pinnacle PCTV Pro
steffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
Looking for a nice solution for different cases with nearly same operations
Hi everybody:
I'm looking for a nice solution for the following problem:
I'm measuring different data at the same time (with different devices).
I would like to save these data all in one array (or cluster?), but I
don't know exactly the way to do this. All values have corresponding
time values. So for one data type it would result in a 2d array,
wouldn't it? But how can I save different data types with their time
values in one array? Or should I take a cluster? And how can I get only
a certain type of data out of this array or cluster again? E.g. if I
only need data type "3" with its time stamps for evaluation? I would
really appreciate an example, I work with LV 7. Thanks!
Then - for evaluation - I only need one data type of these different
data. Which one I would like to choose via the frontpanel (it changes
from test to test). So, I thought of a case structure (where I can
choose which data type and correspondingly which evaluation way). The
evaluation steps for the different data types are quite the same, but
can vary in order of execution. I could write for every case the
(nearly) same evaluation steps, but this would take a lot of time, plus
if I need to change one step I need to change it in every case.
Does anybody know a better way?
Thank you very much in advance,
Steffisteffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time . -
How can I create a solution with Livecycle
I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
> -
Nice solution to change a lot of procedures at once.
if you have to do little changes in a lot of your Procedures / Functions or Packages here is a nice solution to do this in a very short time:
CREATE TABLE T_SOURCE
SOURCE_ID NUMBER,
NAME VARCHAR2(30 BYTE),
SOURCETEXT CLOB
CREATE OR REPLACE PROCEDURE CIAS_PUFFER.pr_t_source
IS
NAME: pr_t_source
$Archive: //PVCS/archives/10gh/PR_T_SOURCE.prc_v $
$Author: ext0523 $
$Date: Aug 04 2008 17:26:54 $
$Revision: 1.2 $
CURSOR c_all_obj
IS
SELECT object_name
FROM all_objects
WHERE owner <>'SYS'
AND object_type = 'PROCEDURE'
ORDER BY object_name;
CURSOR c_prog (cp_name VARCHAR2)
IS
SELECT *
FROM all_source
WHERE NAME = cp_name
ORDER BY line;
v_replace VARCHAR2 (999);
v_st CLOB;
i PLS_INTEGER := 0;
BEGIN
EXECUTE IMMEDIATE ('truncate table t_source');
FOR rec_all_obj IN c_all_obj
LOOP
i := i + 1;
v_st := '--$ARCHIVE$'||chr(10)||'--$AUTHOR$'||chr(10)||'--$DATE$'
||chr(10)||'--$REVISION$'||chr(10)||chr(10);
v_st := v_st||'CREATE OR REPLACE ';
FOR rec_prog IN c_prog (rec_all_obj.object_name)
LOOP
v_replace := UPPER (rec_prog.text);
if instr(v_replace,'$ARCHIVE') >0 then v_replace :=''; end if;
if instr(v_replace,'$AUTHOR') >0 then v_replace :=''; end if;
if instr(v_replace,'$DATE') >0 then v_replace :=''; end if;
if instr(v_replace,'$REVISION') >0 then v_replace :=''; end if;
v_replace :=
REPLACE (v_replace,
'[email protected]',
'prot_easy_cias'
v_replace :=
REPLACE (v_replace, '[email protected]', 'easy2cias');
v_st := v_st || v_replace;
END LOOP;
INSERT INTO t_source
VALUES (i, rec_all_obj.object_name, v_st);
END LOOP;
COMMIT;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
-- Consider logging the error and then re-raise
RAISE;
END pr_t_source;
// classpath= /ORACLE/u01/app/oracle/product/10.2.0.3/jdbc/lib/ojdbc14.jar
// Java SQL classes
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
// Oracle JDBC driver class
import oracle.jdbc.OracleDriver;
// Java IO classes
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileNotFoundException;
import java.io.FileReader;
//Java Util classes
import java.util.Properties;
* This class demonstrates the Oracle JDBC 10g enhanced features for inserting
* and retrieving CLOB data from the database. Using the new features, large
* data of more than 32765 bytes can be inserted into the database using the
* existing PreparedStatement.setString() and PreparedStatement.getString()
* methods.
public class ClobMan {
/* Database Connection object */
private Connection conn = null;
/* Variables to hold database details */
private String url = null;
private String user = null;
private String password = null;
// Create a property object to hold the username, password and
// the new property SetBigStringTryClob.
private Properties props = new Properties();
/* String to hold file name */
private String fileName = null;
* Default Constructor to instantiate and get a handle to class methods
* and variables.
public ClobMan(String fileName) {
this.fileName = fileName;
* Main runnable class.
public static void main(String[] args) throws SQLException {
// Instantiate the main class.
ClobMan clobMan = new ClobMan(args[0]);
// Load the Oracle JDBC driver class.
DriverManager.registerDriver(new OracleDriver());
// Load the database details into the variables.
String dbUrl = "jdbc:oracle:thin:@pmol:1550:dbpmol";
clobMan.url = dbUrl;
clobMan.user = "gh10";
clobMan.password = "secret";
// Populate the property object to hold the username, password and
// the new property 'SetBigStringTryClob' which is set to true. Setting
// this property allows inserting of large data using the existing
// setString() method, to a CLOB column in the database.
clobMan.props.put("user", clobMan.user );
clobMan.props.put("password", clobMan.password);
clobMan.props.put("SetBigStringTryClob", "true");
// Check if the table 'CLOB_TAB' is present in the database.
//clobMan.checkTables();
// Call the methods to insert and select CLOB from the database.
//clobMan.insertClob();
clobMan.selectClob();
* This method will insert the data into a CLOB column in the database.
* Oracle JDBC 10g has enhanced the existing PreparedStatement.setString()
* method for setting the data more than 32765 bytes. So, using setString(),
* it is now easy to insert CLOB data into the database directly.
private void insertClob() throws SQLException {
// Create a PreparedStatement object.
PreparedStatement pstmt = null;
try {
// Create the database connection, if it is closed.
if ((conn==null)||conn.isClosed()){
// Connect to the database.
conn = DriverManager.getConnection( this.url, this.props );
// Create SQL query to insert data into the CLOB column in the database.
String sql = "INSERT INTO clob_tab VALUES(?)";
// Read a big file(larger than 32765 bytes)
String str = this.readFile();
// Create the OraclePreparedStatement object
pstmt = conn.prepareStatement(sql);
// Use the same setString() method which is enhanced to insert
// the CLOB data. The string data is automatically transformed into a
// clob and inserted into the database column. Make sure that the
// Connection property - 'SetBigStringTryClob' is set to true for
// the insert to happen.
pstmt.setString(1,str);
// Execute the PreparedStatement
pstmt.executeUpdate();
} catch (SQLException sqlex) {
// Catch Exceptions and display messages accordingly.
System.out.println("SQLException while connecting and inserting into " +
"the database table: " + sqlex.toString());
} catch (Exception ex) {
System.out.println("Exception while connecting and inserting into the" +
" database table: " + ex.toString());
} finally {
// Close the Statement and the connection objects.
if (pstmt!=null) pstmt.close();
if (conn!=null) conn.close();
* This method reads the CLOB data from the database by using getString()
* method.
private void selectClob() throws SQLException {
// Create a PreparedStatement object
PreparedStatement pstmt = null;
// Create a ResultSet to hold the records retrieved.
ResultSet rset = null;
try {
// Create the database connection, if it is closed.
if ((conn==null)||conn.isClosed()){
// Connect to the database.
conn = DriverManager.getConnection( this.url, this.props );
// Create SQL query statement to retrieve records having CLOB data from
// the database.
String sqlCall = "SELECT rownum, name, sourcetext FROM t_source";
pstmt= conn.prepareStatement(sqlCall);
// Execute the PrepareStatement
rset = pstmt.executeQuery();
String rownum = null;
String o_name =null;
String clobVal = null;
// Get the CLOB value from the resultset
//java.io.BufferedWriter out = new java.io.BufferedWriter(new java.io.FileWriter("pr_all.sql"));
while (rset.next()) {
rownum = rset.getString(1);
o_name = rset.getString(2);
clobVal = rset.getString(3);
System.out.println(" length: "+clobVal.length()+" "+o_name+" "+rownum);
java.io.BufferedWriter out =
new java.io.BufferedWriter(new java.io.FileWriter(o_name+".prc"));
out.write(clobVal);
out.newLine();
out.write("/");
out.newLine();
out.newLine();
out.flush();
out.close();
} catch (SQLException sqlex) {
// Catch Exceptions and display messages accordingly.
System.out.println("SQLException while connecting and querying the " +
"database table: " + sqlex.toString());
} catch (Exception ex) {
System.out.println("Exception while connecting and querying the " +
"database table: " + ex.toString());
} finally {
// Close the resultset, statement and the connection objects.
if (rset !=null) rset.close();
if (pstmt!=null) pstmt.close();
if (conn!=null) conn.close();
* Method to check if the table ('CLOB_TAB') exists in the database; if not
* then it is created.
* Table Name: CLOB_TAB
* Column Name Type
* col_col CLOB
private void checkTables() {
Statement stmt = null;
ResultSet rset = null;
try {
// Create the database connection, if it is closed.
if ((conn==null)||conn.isClosed()){
// Connect to the database.
conn = DriverManager.getConnection( this.url, this.props );
// Create Statement object
stmt = conn.createStatement();
// Check if the table is present
rset = stmt.executeQuery(" SELECT table_name FROM user_tables "+
" WHERE table_name = 'CLOB_TAB' ");
// If the table is not present, then create the table.
if (!rset.next()) {
// Table does not exist, create it
stmt.executeUpdate(" CREATE TABLE clob_tab(clob_col CLOB)");
} catch (SQLException sqlEx) {
System.out.println("Could not create table clob_tab : "
+sqlEx.toString());
} finally {
try {
if( rset != null ) rset.close();
if( stmt != null ) stmt.close();
if (conn!=null) conn.close();
} catch(SQLException ex) {
System.out.println("Could not close objects in checkTables method : "
+ex.toString());
* This method reads the specified text file and, returns the content
* as a string.
private String readFile()
throws FileNotFoundException, IOException{
// Read the file whose content has to be passed as String
BufferedReader br = new BufferedReader(new FileReader(fileName));
String nextLine = "";
StringBuffer sb = new StringBuffer();
while ((nextLine = br.readLine()) != null) {
sb.append(nextLine);
// Convert the content into to a string
String clobData = sb.toString();
// Return the data.
return clobData;
sqlplus -s @pr_all.sql;Is there a better way to satisfy such claim?I have to say I would not consider doing this in the database. Source control would allow you to manage (review / commit, not to mention revert) the results of such a potentially dangerours global search and replace.
Such as if it UPPERcased all my source code for example.
v_replace := UPPER (rec_prog.text); -
Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.
Your best option is to post this in the iTunes forum.
Ciao. -
With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution
Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
Federated Portal solution with 2004sBI.
Hi,
I would like to know the limitation when using fedelated portal solution with 2004s BI. that means 2004s BI web functionalities are used via Enterprise-wide portal, diferent from portal component for BI.
many customers who decide to implement mySAP ERP2005 solution is likely to implement 2 portal components. One is only for BI, another is for Enterprise wide portal, without considering system configuration deelpy.
About the portal content, the following URL show the solutions.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
-Integration using a URL iView
-Export/import
-Global portal (federated portal)
I think the global portal is the best.
About the KM contents, I am now think what is the best way.
I think by using fedelated portal solution, KM content iView and KM navigation iView can be used on the corporate wide portal.
But I am not KM expert and now am considering how to use KM contents which is on BI's EP(KM) as same as those on Enterprise wide portal. is it possible if setting webdav on repository manager on enterprise wide portal?
Kind reagards,
MasaakiThere are a lot of things to consider with KM, one repository or 2? The federated Portal will work with assigning a KM navigation iView to a Role and using remote role assignment. This would put KM on the producer portal. The other option is to setup a Remote KM Repository on the Consumer Portal that points to the producer. This way you can broadcast to the producer KM repository and see this in the Consumer Portal.
With Collaboration Rooms, there are some limitations, such as the Room Directory doesn't work with remote URL iViews or Remote Role Assignments as it launches the URL on the consumer instead of the producer. Currently, Collaboration Rooms should be centralized on your single consumer. If you need to broadcast to it in the producer, you would have to setup a link to a remote repository...
Therefore, if you're working with KM specifically, it all works within the framework, but you need to decide how centralized or decentralized you want your document storage, so there are a lot of project considerations on this one....
Also, webdav works to access the KM repository both on the consumer and producer... -
Has anyone successfully implemented a drop shipping eCommerce solution with MULTIPLE suppliers?
Hi there
I have read a few BC forum articles on this subject, but none seem to have clarified whether a drop shipping eCommerce solution with MULTIPLE suppliers can truly be implemented successfully in BC.
In particluar, my concern is with splitting up ONE online order with products from MULTIPLE suppliers ... and split up the order into its individual supplier components and thereby calculate freight costs for each of the suppliers i.e. the freight cost should really be calculated for each of the suppliers SEPERATELY and not for the order as a whole.
Forum post http://forums.adobe.com/message/4881302#4881302 addresses this issue and Liam Dilley [as always] kindly responded. But his response indicates this is not possible with BC.
If this is the case, drop shipping in BC is quite useless unless:
1. you had only one supplier
2. or, you somehow restricted each order placed to products from only one supplier - which I am unsure is even possible even with JQuery
Any feedback from the community would be most appreciated.
Regards
GavinYou have two requirements:
1. Once ordered, split the order into suppliers, contact the supplier of the product, give the information of the order to the customer. Supplier ships it. This could be done manually but a pain in the ***. I would assume you want it automated.
2. When ordering, multiple products require mutliple shipping rates. As the shipping from location could be different for each product you can't just use the ship from one location option.
Solutions:
1. This is the easier one, you record the supplier in the product via a form or in the product item itself. If you wanted to automate here you could via API, if you wanted to do it manually you also could.
2. Shipping calulator, to make things easier you would have to do everything by weight. Use Javascript to remove the default shipping option on the checkout page, pass all the items in the shopping cart. Use a lookup table function in Javascript "item name to weight" then have another function item to (from) shipping location. Work out the shipping and display it and force change with Javascript BC's shipping price (so the customer pays the correct amount).
Like Liam says, it's not something BC does too well at the moment and the above solution is more of a workaround but does work. -
DMS Solution with ECDS Systems
Hi ,
I wonder whether anyone deployed the DMS Solution ( TCS, MXE,TCS,DMM, Nexus on demad) with Cisco ECDS systems(MDE 3125/1125). I am working on a project where i need to deploy all these deviecs. I like to undestand the work flow between DMS components and ECDS devices. DMS Solution works as it suppose to, but dont have an idea how i can integrate this solutiuon with the ECDS devices. are there any step by step document to integrate the DMS solution with the ECDS.
Also, i found a document for ECDS/SNS integration and they emntioned it needs the external streaming server for the Integration. Can some one confirm this?.
Thanks for your help
Best Regards,
ChrisHello
1- . DMP will be used to present (presentations , videos,etc) which will be uploaded on Appspace.
2-Yes of course there are steps for ECDS and DMS. Please find the below links
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/integration/notes/ecds_int_note.html
http://www.cisco.com/en/US/docs/video/ecds/2.5/quick_guide/ecdsQuickStart.html
http://www.cisco.com/en/US/docs/telepresence/tcs/5_0/media_servers/configuration/guide/wowza.fm.html
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/integration/notes/sns_wowza.html
3-You should use streaming server as (Wowza server or adobe) , please find the below links.
4-ECDS 1125 can be used for (CDSM , SR, External SE for external users).ECDS 3125 is responsible for (content Acquirer and service engine for internal users).Based on your design
Please don't forget to rate.
Thank you -
Interfacing of matrix one product life management solutions with R/3
Hi Frnds ..
We have to make interface with Matrix one PLM solutions with R/3 to transfer Material Master and BOM .
Here we don't have middleware (XI etc). Is there any way to make interface by using BAPI .. (Url http://www.matrixone.com/matrixonesolutions/index.html)
Please urjent ...
Advance Thanks
Jagadeshwar.GQ.) Can we interface R/3 with E Matrix One PLM system by using BAPI. E Matrix one PLM system is developed on java ?
A.) YES..MatrixOne website mentions that integration with ERP products like SAP, Orcale is possible.
Q.) What are the interfacing steps?
A.) If your comapny has bought the product I'm sure you would have received some documentation on interfacing MatrixOne with SAP.
~Kiran -
HP 10G "NC510F" NIC compatible with X2 10G tranceivers?
Specifically, does anyone know if the HP 10G NIC work with Cisci X2-10G-LRM or X2-10G-SR?
-JimJim,
according to the datasheet for that NIC (http://h18004.www1.hp.com/products/servers/networking/nc510f/index.html), it says that it is "10GBASE-SR fiber optic".
The "SR" (short range) part here is the important part. The specifications for SR are standardized - so anything that is "SR" will interoperate.
so: the Cisco "SR" part will work fin, the "LRM" won't, as LRM is a different standard.
SR optics use multimode fiber - so you'll need that.
from memory, an Cisco X2 optical module has SC connectors, the HP NIC looks to be LC connectors, so you'll need a multimode patch cable that is LC-SC - again - something that is fairly standard. -
Finding a new NIC compatible with OS 9
We had one of our systems (StarMax 4000) network card die on us. Now I am trying to find anyone selling NICs compatible with OS 9. Non of the cards we have laying around where recognized by the OS.
So far Google searches haven't helped, neither did a search of these forums. I did find some compatible wireless cards, but we don't use wireless for security reasons.
Anyone that knows a provider it would be much appreciated.
Thanks
Mike Brown IITry this eBay search. Apple and Zynx cards with the Apple sticker on the Big Chip require no special driver and are supported in OS 9 and Mac OS X. Asante, farallon, and other require drivers which may be hard to come by or hard to install.
eBay Search: Apple ("10/100", "Fast ethernet","RJ-45",RJ45) -
11 Nice Features with New Awesome & easy Magnetic Pen Tool (Updated)
1. Scale effects during the scaling object, in the control bar there is more space (Empty) that will be the helpful to show you the example of the picture that I have made myself, when you transform any object, you will see these options in the control bar.
2. Save preset of filters in filter gallery:- will be really powerful, it must be exchangeable so that we could send that preset to any one, it must be applicable on percentage(%) of document size, (depends on document resolution).
3. Filter gallery must be the (live filter gallery), if this works on any raster object without converting to smart object, this will be helpful for creating live PSD.
4. History panel:- history panel must save the history of document. It will be helpful and powerful, we could apply that history to any document like actions, and history should not be saved with document itself, it must be separate like actions, create 2 arrows in the bottom of panel like layer combs’ panel, to check the history, if any step is wrong we could be able to remove that step,
OR
5. Also create/convert history into action, see the pic as example,
If (to Adobe Photoshop Team) history saving is not a good idea! Then before closing the document you must convert history into actions, when any person saves document and has forgotten converting history into actions and wants to close the document, at that time that dialogue must be opened, (Do you want to convert your history into actions, when you open (that) document again you will miss history, and also must create a CHECK BOX for don’t show again.
6. Layers Group:- In the group (folder) we move the objects with move tool and it moves all grouped objects that’s much better, but when we open the group (Folder), after opening it moves also all grouped object !!!, that’s not perfect, I suggest you how to do it, double click on grouped any object to open the group then move any object, and double click on any grouped object to close the group (folder). ( like Illustrator )
7. Photoshop Extended can create powerful creative animation with audio and animation panel support completely the smart object and smart object makes animation really smart. But the problem is that it takes too much time to generate animation of few seconds and generated video file size is very large up to 1.GB.
Here is solution, like new document dialogue box under the Device Central button it shows the document size, as hint, same way in the render video dialogue box it must show the file size and generating time and reducing file size hints.
I had created (20 months ago) in Photoshop extend CS3 really awesome animation of earth, from where it starts it ends there, and shadows on earth are really awesome, map that moves to the shadow side, it changes from day to night and in the shadows you can see the roads’ and cities’ lights’ just like real night map photo it happens like naturally cause of smart object, I have two photos of the map day and night used for animation, you can see that creative animation on youtube.
(Link)= http://www.youtube.com/watch?v=sd86xGIkQxM
watch this animation in full screen Mode, b/c Youtube has reduced the Quality of Video.
8. Welcome Screen:- Why welcome Screen is necessary?
Adobe’s all products must be linked with Design sequence. (Interface)
Design Standard Suite which itself is a famous printing and publishing suite for design ( creation) layout, must keep same sequence of all products and should not affect the attraction,
Example for Interface, now if CS6 all programs are created with new interface will you don’t change the Photoshop's interface???
Here are my Design Sequences Examples
These Pictures I have Designed in Illustrator
Photoshop with Welcome Screen Looking like Illustrator & Indesign now it matching with its Family.
Benifits of Welcome Screen for ( New ) user
A. Many people don't know that Photoshop has free few samples with it these are nice example to understand that what photoshop can do!
B. Photoshop Exchange : is really Necessary : for to exchange Workspace, color profile, Actions, Key Board Shortcuts, Layer Styles, Swatches, Filter Gallery Presets & PSDs etc.
C. This will be helpful for New Users TV.Adobe.com they will watch free teqchniques, as see this welcome screen.
D. Any older user don't want to see the welcome screen that person can turn on that check box (Don't Show Again).
9. Pen Tool + Magnetic Pen Tool =
In my idea pen tool is the perfect tool for vector drawing it gives us perfect result as we want. but about those people like (Toys-R-Us (One Really Big Pen Tool Shortcoming) or other like him, if they can't understand, although pen tool is very easy to use, & he wants short key without going back for to breatck the handle, (for those people) if you want to create short key then short key should be "c or any easy" press to breat the handle, then press again to get back handle again during the using pen tool, or create a magnetic pen tool it must work like magnetic lasso tool works for selection, it will be the best & easy to use & to understand, during to use this tool if it goes to wrong way simply press back space key to go back to last step same like Magnetic Lasso.
(Awesome Magnetic Pen Tool)
or create pen tool like fireworks its pen tool shows next click's preview (very nice pen tool is in fireworks to understand ( really Awesome )
10. keyboard shortcuts like Illustrator for Blend Modes Next , Previous & Opacity 10 to 90, I had started to learn Illustrator CS3 & since CS3 I use these shortcuts for that, (~)tildi for next blend mode, Shift (~) tildi for previous mode, & opacity 10=1 key 20=2 to 90=9 key
11.PANEL ICONS Should be Attached under or above the tool Bar but not on Right or Left Side only ( like Indeign CS2 ).
Note :-
I shall appreciate your frank comments on the above suggestions.
Message was edited by: Muhammad Amjad Khan Abro
Message was edited by: Muhammad Amjad Khan AbroOK Here goes my wannahaves...
1) create new table or sheet from a file instead of having to open the file and copy/paste into current document. ie "Insert Sheet from file", "Insert Table from File"
2) show linked data from a data source other than the address book - eg an ODBC data source or Filemaker database
3) Ability to paste a filtered table into a new table with just the found rows.
4) Ability to freeze rows and columns to allow for very wide or deep tables
5) When typing data into a cell, automatically adjust its width as you type. Depending on your enter key config, hitting enter puts a new line in the cell and adjusts the row height to fit.
6) Printer page formats default to regional standard: eg in Australia, UK - A4
7) Popup list or menu contents based on a data range: eg a list of categories
8) Media to be selected from anywhere on the system, not just in iTunes/iPhoto (eg most of my video is on an external hard drive)
9) "Autofilter" based on contents of the column.
10) Vlookup and other reference functions: need to be able to select a table (by name) as your range, a column/row (by name) to look up from and a column/row (by name) to retrieve. All functions should work this way, not just the basic ones.
11) When inserting a table you should be asked how many rows and columns.
12 "Format painter" - copy styles and other formatting from cell to cell and table to table.
13) Outlining based upon repeated cell values
Maybe you are looking for
-
How do I prevent a user from opening multiple instances on the same computer?
On the site oldnavyweekly.com there is a .swf that prevents users from opening multiple instances of the site at the same time on the same computer. If you open the site, and try to open it a second time in another window, it won't load. You can't op
-
How do i get my icloud email account set up in mail on our new mac.
How do i set up my iCloud account on our new Mac My family have set up their Sky, gMail, & hot mails accounts really easily yet mine just woun't work keep hetting a message unable to conect to outgoing mail server. why are 3rd party accounts so easy
-
ABS version of 2.6.23.14 won't compile
Greetings, I am trying to recompile the default kernel for Arch and I am finding that the default patch set is erroring out. ==> Making package: kernel26 2.6.23.14-1 (Sun Jan 20 14:25:53 EST 2008) ==> WARNING: Running makepkg as root... ==> Checking
-
Activity Monitor won't leave dock
I've tried right mouse also pulling above dock to remove-but won't go away.
-
Itunes crashed after latest updat
Itunes crashed after latest update. I have uninstalled it but cannot reinstall it??