A particular recording session shows dancing level meters but no output!

only this garageband project is behaving like this. i've opened other projects and listened to itunes and it all works. this particular project shows the level meters and compression lights and everything else as it's playing. each track shows it's producing sound. the master track is right in the middle as always. even the master track EQ analyzer shows something is playing. however, the level meter on the top right of the application is blank. it's turned up, but it's not showing a level. it's the only level meter/signal indicator light in the entire program that is NOT lit up. i cannot figure out where the problem is. i've restarted garageband, restarted my computer, saved the project as another name and re-opened it, etc. i'd open it in the old version of garageband but due to the AU's i've used, it would totally wreck the project. i suppose i could do it and have the AU's bypassed just to see if it plays, and then remix/remaster the whole thing. but i'd like to avoid that. any tips?

HI Bee Jay,
Thanx for the info. However i think it's not indicating audio level. ie it displays the same level for all tracks regardless of what level the actual track audio is!
They just click up and down a few bars on every channel that has any audio on it. It is almost as though they are monitoring a click or metronome level because it is very regular. It doesn't coincide with hard drive usage but is a similar regular pulse as that.
I have noticed that if there is no audio at all on a certain track then the level meter doesn't appear at all. Not sure if that's any help or not.
Many Thanx
Mark B.

Similar Messages

Session shows up on itunes but not on nike +

hi all, as the title suggests. Ive had a nike + account on the website for a while, today I started using my ipod etc and plugged the ipod back in to sync it. The run shows on my iTunes nike + tab, but not on the website....? any thoughts please?
thanks

Hi anzagi - I am having the same problem and have spoken to an Apple tech who is working with me on a fix. Not sure if the problem is withe the nano or the Nike+ site, but I can't seem to load any runs up the Nike+ site after having done so for nearly a year. This only happened since the new upgrades for the nano and iTunes. I did restore my nano once and that seemed to work, but then after another 3 mile run, nothing would load. Very frustrating. They keep telling me to "uncheck" the visit Nike+ site automatically, click "Apply" and then check it again. This also worked ONCE. I need a more long term solution, and one that is more reliable. I will post more as I work with the Apple guy. Cheers.

Level Meters on "Record Audio" have disappeared

I'm using 10.0.8 with OS 10.8.3 and yesterday connected a Blue Microphone Yeti as the Sound Input Device. When clicking Window>Record Audio, the window to select the Destination, Input Device, Gain and so on appears but the level meters at the top of the window are unresponsive. That is, the sound level scale is present but no green bars show input level. I can still record a voice-over fine, the clips appear in the timeline and the sound meters on playback display properly but yesterday the "Record Audio" meters worked and today they're gone. Any ideas on what I could have done to make them disappear?

So it doesn't sound like it's a hardware or drivers problem.
I updated to 10.0.8 and I cannot find a way to reproduce this. (But I'm not running 10.8.)
Try the trashing your preferences with Preference Manager.
Good luck.
Russ

Recording level meters

When tracking, what do you use for level meters? So far I've found the mixer view, but those meters are small. For tracking I'd like to configure Logic as close to a tape recorder as possible. Good meters + transport controls and nothing else to distract from the music.

Lots of choices - I favour InspectorXL, but I will also sometimes use the meters on the UAD Precision Limiter, Sonalksis FreeG, or Logic's own meters (although I don't really like these.)
Remember that we no longer live in the in the days of tape. The benefits of decent convertors and 24-bit recording is that we can leave plenty of headroom, know that we are getting a good, clean recording, without having to panic-watch for overs, making it less necessary to stare at the meters.
Given the choices, I'd pick up FreeG as it's free, and I favour InspectorXL for general metering (the Elemental Audio version, not the RogerTheDoger version).

Enable or disable particular record in list item based on a corresponding c

Hi,
How can i Enable or disable property of particular record in list item (multi record) based on a corresponding check box(multi record) ,
e.g Form Structure:
if press a button then record should populate where multi_post_query
if my_check_box = 1 then
my_list_item disable to update;
else
my_list_item enable to update;
end if;
now wanted result is like below
my_check_box ---- my_list_item
+----------------------enable
+----------------------enable
+----------------------enable
_----------------------Disable
_----------------------Disable
Here "+" means checked,"_" means unchecked and "enable" means updatable "Disable" means not updatable
the pseudo code is like,
if my_check_box = 1 then
my_list_item enable to update;
else
my_list_item disable to update;
end if;
Note: my_check_box is not updatable
please tell me which trigger and where I should create
Thanks
Edited by: 838602 on Feb 21, 2011 11:12 PM
Edited by: 838602 on Feb 22, 2011 1:40 AM

Hi Abdetu,
I created WHEN-NEW-RECORD-INSTANCE Trigger at data block level
And I need should work like below pseudo code (sorry for previous pseudo code)
if my_check_box = 1 then
my_list_item disable to update;
else
my_list_item enable to update;
end if;
so change code as
IF :MULTI.PROTECTED_FIELD = 1 THEN
SET_ITEM_PROPERTY ('MULTI.ACTION',REQUIRED , PROPERTY_FALSE );
SET_ITEM_PROPERTY('MULTI.ACTION',NAVIGABLE,PROPERTY_FALSE);
SET_ITEM_PROPERTY ('MULTI.ACTION' ,UPDATE_ALLOWED,PROPERTY_FALSE);
SET_ITEM_PROPERTY ('MULTI.ACTION' ,INSERT_ALLOWED,PROPERTY_FALSE);
:multi.action := 0;
ELSE
SET_ITEM_PROPERTY ('MULTI.ACTION',REQUIRED , PROPERTY_TRUE);
SET_ITEM_PROPERTY('MULTI.ACTION',NAVIGABLE,PROPERTY_TRUE);
SET_ITEM_PROPERTY ('MULTI.ACTION' ,UPDATE_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY ('MULTI.ACTION' ,INSERT_ALLOWED,PROPERTY_TRUE);
END IF;
Sorry, still I am not getting desired o/p. even i check item (ACTION) level Trigger
Note: my_check_box is not updatable
that would assign at time of button press (post query) as i mentioned
Edited by: 838602 on Feb 22, 2011 1:41 AM

How to find the particular record in 1000's of workflow jobs are running

Hi,
In a data manager -> in workflow tab>IF a record is in CHECK-OUT MODE there are 1000's of jobs are running in that workflow tab. Can anyone tell me how to find that particular record in that workflow jobs.
Can anyone show me the difference in getting a record in 5.5 and 7.1

Hello COTI
Unfortunatly, SAP MDM doesn't have good ability for WF search.
All WF clarify by it's status (unlaunched, avialable, Received, complited, error etc.)
For each WF SAP MDM assing unique Job ID and this id will be shown in Job ID field in Data Manager WF Tab.
You can change WF list order by all WF fields like as Job ID, Step, User, Start etc. and try to find your's WF.
You can use Java API - this is one of the best solution for WF management and WF mass upload (for example)
Regards
Kanstantsin Chernichenka

How do I record tv shows off my HDTV to my macbook?

Is there a particular app that I can use to record tv shows off my HDTV? I don't think I can use iMovie because the highest OS X my macbook supports is lion (7, not mountain lion 8). My Macbook is from early 2008 and the model number is a1181.

Unless you have a very unusual TV it is not sending out anything that your MacBook can take in. What you want is to get the TV signal at its source, such as your cable TV box and send that to your MacBook. You would need something like ElGato's EyeTV HD for this.
Best of luck.

How to kill particular Oracle Session from the multiple Session of User

Hi,
I am working on Web Application using ASP.NET , C# with Oracle. I am excuting queries from multiple connection of same user. I want to kill particular user session. I have tried to Kill session by using ALTER SYSTEM KILL SESSION 'sid,serial#' it is working fine but how can i identify which session is generated by particular connection so that i can kill that particular session.
Suppose there us user 'abc' there are multple instance of this user and all are active but same USERNAME. So Please tell me how can i identify that session through which i am executing the query.
Thanks,
Nitin

Some ideas for how to pick the right session:
-Look at the time the session was connected (logon_time)
-Look at the time the session last started it's most recent statement (last_call_et)
-Look at the sql that the session is running (join with sql_address and sql_hash_value over to v$sqltext_with_newlines or one of the other views that show you the sql they are running)
That usually gets me most of the way, if it's possible to distinguish them. ("Yeah I just started this query and I want you to kill it." is different than "I started five different queries at about the same time and I'm not sure which one I need killed.")

Update the particular RECORD which is already exist in the table

EXPERTS,
AM USING JDEV VER11.1.1.4.0 n am using adf business components.
SEE this my snapshot.
http://www.4shared.com/photo/fullsize/hpoeMX1o/1_online.html
THIS MY TABLE
DESC glm_control;
FIELD Name Null DATA Type
GLMCTRL_BU NOT NULL VARCHAR2(5)
GLMCTRL_ACCT_LENGTH NOT NULL NUMBER(3)
GLMCTRL_ALLOW_UPD_RJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_UPD_DJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_UPD_AJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_CAN_RJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_CAN_DJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_CAN_AJ NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_INS_RJ_PC NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_INS_GJ_PC NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_INS_DJ_PC NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_POST_GJ_PO NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_PYE_RJ_UP NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_PYE_AJ_UP NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_PYE_DJ_UP NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_PYE_GJ_UP NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FIN_AJ_POST NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FIN_RJ_POST NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FIN_DJ_POST NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FPC_GJ_CHK NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FPC_AJ_CHK NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FPC_RJ_CHK NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_FPC_DJ_CHK NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_ZERO_DJ_POST NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_CHNG_BUD_OPT NOT NULL VARCHAR2(1)
GLMCTRL_ALLOW_NS_FIN_YEAR NOT NULL VARCHAR2(1)
GLMCTRL_CRE_BY NOT NULL VARCHAR2(15)
GLMCTRL_CRE_DATE NOT NULL DATE
GLMCTRL_UPD_BY VARCHAR2(15)
GLMCTRL_UPD_DATE DATE
GLMCTRL_AMC_REC NOT NULL VARCHAR2(1)
GLMCTRL_DATE_JRNL NOT NULL VARCHAR2(1)
GLMCTRL_CLR_JRNL NOT NULL VARCHAR2(1)
GLMCTRL_EX_QTY NOT NULL VARCHAR2(1)
GLMCTRL_EXP_PERIOD NOT NULL NUMBER(7)
GLMCTRL_EXP_DAYS NOT NULL NUMBER(7)
GLMCTRL_LC_FIN_IMP NOT NULL VARCHAR2(1)
GLMCTRL_AUTO_OFFSET_DEL NOT NULL VARCHAR2(1)
GLMCTRL_GRN_INV_RND_OFF NOT NULL NUMBER(3)
GLMCTRL_INV_PYMT_RND_OFF NOT NULL NUMBER(3)
GLMCTRL_INV_RCT_RND_OFF NOT NULL NUMBER(3)
GLMCTRL_LVL1_DESC VARCHAR2(30)
GLMCTRL_LVL2_DESC VARCHAR2(30)
GLMCTRL_LVL3_DESC VARCHAR2(30)
GLMCTRL_LVL4_DESC VARCHAR2(30)
GLMCTRL_CFS_AMT_FMT VARCHAR2(1)
GLMCTRL_SERV_TAX_CR_OPT VARCHAR2(1)
GLMCTRL_REJ_WAR_OPT VARCHAR2(1)
GLMCTRL_CASH_AMT NUMBER(15,3)
GLMCTRL_INV_RND NUMBER(5)
GLMCTRL_SHR_COST_TYPE VARCHAR2(2)
GLMCTRL_TAX_AMT_FLAG VARCHAR2(1)
GLMCTRL_OPDATE DATE
GLMCTRL_OP_YEAR NUMBER(6)
GLMCTRL_RG_CTRL VARCHAR2(1)
THIS TABLE CONTAINS MOREOVER 25 RECORDS.
I WANT TO DO THE FOLLOWING USECASE:
1. I WANT TO SHOW THE PARTICULAR RECORD RELEATED TO THAT PARTICULAR FIELDS IN MY PANEL BOX AND
2. AND ALSO UPDATE THE PARTICULAR 4 FIELDS WHICH IS SHOWN IN MY PANEL BOX
IF YOU NOT UNDERSTAND I WILL GIVE THE EXAMPLE WATCH IT.
glm_control - THIS MY TABLE - THIS MY RECORDS
IT CONTAIN 1..TO ..25 RECORDS.
GLMCTRL_BU || GLMCTRL_LVL1_DESC || GLMCTRL_LVL2_DESC || GLMCTRL_LVL3_DESC || GLMCTRL_LVL4_DESC
1. MEL || EXPL1 || EXPL2 || EXPL3 || EXPL4
15. UIL || XPL1 || XPL2 || XPL3 || XPL4
25. DIL || PL1 || PL2 || PL3 || PL4
1*. I WANT TO SHOW FOUR OF THE FIELDS (GLMCTRL_LVL1_DESC GLMCTRL_LVL2_DESC GLMCTRL_LVL3_DESC GLMCTRL_LVL4_DESC) OF THE (*'UIL'* - NOTHING BUT IT IS DATA WHICH IS IN GLMCTRL_BU FIELD).
I WANT TO UPDATE THOSE FIELDS(GLMCTRL_LVL1_DESC GLMCTRL_LVL2_DESC GLMCTRL_LVL3_DESC GLMCTRL_LVL4_DESC) OF A PARTICULAR RECORDS
BASED ON THIS CONDITION. GLMCTRL_BU = 'UIL'
THIS UPDATION DONE WITH THE HELP OF BUTTON.
I FACING THE FOLLOWING PROBLEM:
BUT HERE FIRST RECORD OF THE TABLE IS SHOWN. SEE THE SNAPSHOT.
ONLY U SEE THIS SNAPSHOTS.
http://www.4shared.com/photo/fullsize/hpoeMX1o/1_online.html
ATLAST I NEED TO SHOWN PARTICULAR RECORD(NOT ALL RECORD) IN PANEL BOX. THAT PARTICULAR RECORD BASED ON THE CONDITION.
AND ALSO UPDATE THE REOCRD WITH THE HELP OF BUTTON.
CAN ANY ONE HELP ME.
i think so it can be done with viewrowimpl class we can done it.
but i dono how to proceed?
note: am newbie.
please help me.

Hi,
just use a ViewCriteria on the View Object query. Then drag and drop the ExecuteWithParams operation as a paremeter form to the page and ensure pressing the search button partially refreshes the table
Frank

Infocube archived records still show up on query

Hello everyone!
I have archived an Infocube. To test this, I've created a test query upon it, to see if the old (archived) records would show up.
And they do!!
Before you state the obvious, I have successfully ran the deletion job (at least according to SM37). Besides, when I visualize the data via LISTCUBE, the old data does not show up.
On the other hand, when I fetch the number of records of the fact table (via SE16, /BIC/F...), I get the very same value as I did before the archiving session!
Any thoughts?
Best Regards,
Luís Andrade.

Hi,
can you try the following in sequence:
1. try re-deletion from tcode SARA.
2. drop & reload indexes.
3. reconstruct DB stats.
4. run re-org jobs (imp if you are on Oracle DB).
5. re-generate the queries.
--Akashdeep
Edited by: AKASHDEEP BANERJEE on Oct 14, 2010 11:00 PM

How to move to a particular record after getting the key from pop list?

Hi,
I have a non-tabular form. I have provided a POP Lov to display and return the primary key of the table.
When a particular record is selected from the List I want the page to fetch that particular row from the table and populate the fields. This is a critical feature I need in most forms, so use can easily fetch any record of choice.
Can some one help me?
thanks
Seb

Hi
There are several methods you could adopt for this.
The most typical method would be the report/form combination of pages - where the form is populated based on the PK ID passed by a link from the form. In a lot of cases, I would suggest, this is what users would expect.
However, I can also see situations where the user wouldn't want to see a report just to get to a form. In these cases, either a Select List with Submit or a Popup LOV would be required.
Either way, the principles would be the same - you need to populate the form page's hidden PK item with the ID of the record you want to display/edit and let the page's "Fetch Row..." process retrieve the record when the page is reloaded.
For a Select List with Submit, the list itself could be the PK item or you could transfer this into the normal hidden item. The latter could be handled either by a process or a branch when the page is submitted (which would be triggered by the change in the list's value).
The popup LOV method would be more complicated as you have two pages to work with. However, this can still be done as long as you consider two things - (1) the popup page needs to set the ID value for the form page to use and (2) the popup page needs to force the form page to reload so that it can use this value. (1) can be done using a normal page submit - you can set any value on any page and it will be retained unless you clear the session value(s) for that page or item and (2) can be handled with javascript - a child window (which is what a popup is) can run javascript in its parent window - or by the user clicking a button on the form page.
Another alternative would be to retrieve all relevant values in the Popup and populate the parent with all these values when the user makes their selection. This would require that the hidden PK ID item on the form is "Hidden" rather than "Hidden and protected" to allow javascript to set this value so that the record can be saved correctly.
Andy

Cannot record tv shows using QIP7100

I can not record tv shows from my cable box QIP7100, I tried using the fios tv agent and it has no answer. I,m sure there is a cable missing somewhere, I am technically challenged. Can anyone help? Thanks

That particular unit does not have a recorder built into it.
It's a HD set top box only.
You want an HD DVR Set top box
Those models are
6416
7216
7232
There is a cisco model, but you can't mix and match, so forget about that one.
You should check to see if you have any of those models in your house or on your account, and if you don't then you should call Verizon to upgrade to one.

How to find out which user has locked a particular record of a table

Hi
Is it possible to know - which user has locked a particular record (I know the primary key of the record) of a table
Regards

select     OS_USER_NAME os_user,
     PROCESS os_pid,
     ORACLE_USERNAME oracle_user,
     l.SID oracle_id,
     decode(TYPE,
          'MR', 'Media Recovery',
          'RT', 'Redo Thread',
          'UN', 'User Name',
          'TX', 'Transaction',
          'TM', 'DML',
          'UL', 'PL/SQL User Lock',
          'DX', 'Distributed Xaction',
          'CF', 'Control File',
          'IS', 'Instance State',
          'FS', 'File Set',
          'IR', 'Instance Recovery',
          'ST', 'Disk Space Transaction',
          'TS', 'Temp Segment',
          'IV', 'Library Cache Invalidation',
          'LS', 'Log Start or Switch',
          'RW', 'Row Wait',
          'SQ', 'Sequence Number',
          'TE', 'Extend Table',
          'TT', 'Temp Table', type) lock_type,
     decode(LMODE,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', lmode) lock_held,
     decode(REQUEST,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', request) lock_requested,
     decode(BLOCK,
          0, 'Not Blocking',
          1, 'Blocking',
          2, 'Global', block) status,
     OWNER,
     OBJECT_NAME
from     v$locked_object lo,
     dba_objects do,
     v$lock l
where      lo.OBJECT_ID = do.OBJECT_ID
AND l.SID = lo.SESSION_ID
hope this helps
Zekeriya

Purchasing Cube -- 0PUR_C01.. "Added record" is showing zero in request

When i try to load the data to this cube, my trasfer record is showing values while Added Record is showing zero values. Whats the problem. Please advise !!

Hi,
Check whether do you have defined the industry sector in R/3. This has to be done before filling the setup table. search the forums with note no 353042.
This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Regards,
Anil Kumar Sharma .P

I transfered my purchases from my iphone to my mac. All transfers completed. One particular album shows up on the phone but the songs are greyed out and don't play. Itunes shows album as purchased but album is not in my Mac library.

I transfered my purchases from my iphone to my mac. All transfers completed. One particular album shows up on the phone but the songs are greyed out and don't play. Itunes store shows album as purchased but album does not show up in my Mac library. How can I retrieve the album.

So i've found the answer to this by clicking on every menu and setting in the itunes store. It turns out some purchases in the cloud can be hidden probably as the result of an interrupted transfer/sync/backup or a network outage. To unhide purchases 'greyed out ' items , go to the Itunes store (on the PC) click on your account name and select view account. (you'll be prompted for your itunes password) once you are in scroll down to the purchase history section. there should be an option for hidden purchases. click through and click on unhide purchases, redownloadble purchases. any hidden purchases will then show up. click on unhide to reactivate and download. This may only work for purchases in the cloud.
hope others find this useful.

A particular recording session shows dancing level meters but no output!

Similar Messages

Maybe you are looking for