A patch for ACS 3.0.1 has been emailed

The bad signature error that started on 12/15/2004 has been corrected with a patch to ACS 3.0 and 3.0.1. It was emailed to customers of record.
In some cases the email address will be for an employee no longer with your company and will bounce. If you have not received the patch, send an email with your company name and domain name to [email protected]
If you are still running ACS 2.x, contact me and I will arrange for a free upgrade to ACS 3.0.1. A patch for ACS 2.x wasn't possible.
Irv

Good morning,
we inform you that we havent received any patch about ACS from you.
Since yesterday, when we download E-book files from our clients, in our ACS the following message appears:
EBXClient Error:404
Could not authenticate with voucher engine at server
Server Code:500
(5) Could not obtain voucher
Exception ActiveVE (issue Voucher):
Code 0x80000007 (-2147483641)
ActiveVE Failed, code = 7(Voucher Engine credentials bad signature)
Our Adobe ACS version is 2.0.
No message appears in the Windows Event Viewer, on the contrary in the Event Server Properties ACS the following warning appears:
500;100 Internal server error Asp error
501 Not implemented
502 Bad Gateway
Solving this problem is very important and urgent for our sales.
We thank you in advance for your prompt reply.

Similar Messages

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • Report for the List of Vendor for which no Purchase order has been created

    Hi ALL
    Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
    regards,

    Hi Prateksha Vaid ,
    Go to transaction S_ALR_87012093
    Select accounts with no purchases checkbox and execute
    Diwakar
    reward if useful

  • Maximum number of items for an FI document ('999') has been exceded

    Hi,
    I have try to move some materials from one storage location to another using  MB1B transaction. And i receive following error:
    Maximum number of items for an FI document ('999') has been exceded.
    Please someone help me.
    Thank you.

    Dear Dan
    As you would be aware one FI document can have line items upto a maximum of 999 and it seems, you are trying to input more than that and hence the error.
    Try to minimise the number of line items and retry.
    thanks
    G. Lakshmipathi

  • Max Number of items for an FI document (999) has been exceded

    Dear Guru's
    I hav production Bom For A ( Truck) , and now when i declare the production it gives me an ERROR :-
    Max Number of items for an FI document (999) has been exceded.
    How i can overcome this error!!
    Please help
    Regards
    Rahul Bhardwaj

    Hi
    You cant post more than 999 line items in FI document and you need to split the document if line items crosses 999.  It looks your production BOM itself contains some errors.  Check it.  Becoz no production BOM contains such a huge materials.  Splitting the BOM into sub BOM may be another option.
    Srinivas

  • Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?

    Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
    Please help !!!!

    thank you again
    We have now got it working!!      From: Ned Murphy <[email protected]>
    To: V BOOT <[email protected]>
    Sent: Thursday, 27 November 2014, 19:55
    Subject:  Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
    Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
    created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionYou need to follow the instructions carefully for the downloads to work.  Try using a different browser if you continue to get blank pages. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6967807#6967807 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6967807#6967807 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can I get rid of the constant asking for PIN whenever my iPad has been sleeping?

    How can I get rid of the constant asking for PIN whenever my iPad has been sleeping?

    You can turn it off:
    Settings > Passcode > enter your passcode > Turn Passcode Off.
    For security's sake, I recommend changing the amount of time that passes before it locks as opposed to turning off completely:
    Settings > Passcode > enter your passcode > Require Passcode:
    Immediately
    After 1 minute
    After 5 minutes
    After 15 minutes
    After 1 hour
    After 4 hours

  • Run MRP for production order/maintenance order has been release

    Hi all,
    please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
    Thanks all

    Hi Hoai,
    It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
    Material Requirements Planning (PP-MRP)
       Planning Process
         Net Requirements Calculation
           Net Requirements Calculation for MRP
    But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
    consider it.
    Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
    Regards,
    Rachel

  • Alert: The backup operation for the cluster configuration data has been canceled due to an abort request

    Hello,
    Alert: The backup operation for the cluster configuration data has been canceled due to an abort request
    Alert description: The backup operation for the cluster configuration data has been canceled. The cluster Volume Shadow Copy Service (VSS) writer received an abort request.
    This is the backup of VSS which is sending this alert every morning.
    Event ID 1544
    All fixes I found are applied..
    kb2277439 has already been applied
    978527 is there too
    975921 is there too..
    any other id
    Cluster Node /Status gives both nodes up A & B
    The error is coming only on Node A...
    Any idea?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi,
    Which backup software do you use to do a backup? Please also try to apply those hotfix on the Cluster:
    A transient communication failure causes a Windows Server 2008 R2 failover cluster to stop working
    http://support.microsoft.com/kb/2550886
    The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2524478
    Recommended hotfixes and updates for Windows Server 2008 R2 SP1 Failover Clusters
    http://support.microsoft.com/kb/2545685/EN-US
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can i stop the Erase all data and settings process for Iphone 3gs? It has been 4 hours and still not finished!

    Hi, i just want to know if theres any way to just stop the erase all data and settings for my iphone 3gs it has been 4 hours and it still havent finished yet, still showing the black screen with an apple icon. Im getting so frustrated, is there any way to just stop the process and roll back the changes made? Would it do any harm if i press on my home key and power button the same time? Thanks!

    Something has gone wrong, on an iPhone 3Gs the erase all operation should be instantaneous. Disconnect your phone & force it into recovery mode:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

  • How can I find out my PIN number for my old ipad that has been disabled

    I need help to find out my old PIN number for my old ipad it has been disabled as I can't remember what my pin is

    http://support.apple.com/kb/ht1212

  • HT201272 used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

    used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

    iOS 6 came out a couple of days ago, so Apple's servers have probably been busy as a result of people downloading it

  • I am a new Logic user. I attempted to download the additional data (roughly 20GB) and for two days my Macbook has been alerting me that there are five seconds left for my download. Ha. I cant quit Logic, or shutdown my computer. Any suggestions?

    I am a new Logic user. I attempted to download the additional data (roughly 20GB) and for two days my Macbook has been alerting me that there are five seconds left for my download. Ha. I can't quit Logic, or shutdown my computer. Any suggestions?

    Sorry for the long subject line. Ha.

Maybe you are looking for