Max Number of items for an FI document (999) has been exceded

Dear Guru's
I hav production Bom For A ( Truck) , and now when i declare the production it gives me an ERROR :-
Max Number of items for an FI document (999) has been exceded.
How i can overcome this error!!
Please help
Regards
Rahul Bhardwaj

Hi
You cant post more than 999 line items in FI document and you need to split the document if line items crosses 999. It looks your production BOM itself contains some errors. Check it. Becoz no production BOM contains such a huge materials. Splitting the BOM into sub BOM may be another option.
Srinivas

Similar Messages

Maximum number of items for an FI document ('999') has been exceded

Hi,
I have try to move some materials from one storage location to another using MB1B transaction. And i receive following error:
Maximum number of items for an FI document ('999') has been exceded.
Please someone help me.
Thank you.

Dear Dan
As you would be aware one FI document can have line items upto a maximum of 999 and it seems, you are trying to input more than that and hence the error.
Try to minimise the number of line items and retry.
thanks
G. Lakshmipathi

Max number of items exceeded?

I am trying to develop a questionaire like application. Most of the logic is stored inside pl/sql functions (that is retrieving the previous or next question with possible answers and answer-types, like, eg. radiogroup, select-list, textarea, ...) while all of the questions and respective possible answers are kept inside a collection. In processing the answers after submit I store given answers inside the same collection, basically by nullifying all possibly previously given answers for the current question and then looping through eg, g_f01.count to refill. The entire application remains on the same page, showing eg., in one 'frame', one or two questions with say 7 checkboxes and two textareas.
Everything seems to work fine, I can go forward and backward and will find new questions or ones that already have been answerd, but!!...
after the 50st item (answer), that is after I reached the 50st radiogroup, checkbox or textarea, new checkboxes or radiogroups even though shown the resulting values will not be stored inside the collection anymore.
generating the page i use:
htp.prn(apex_item.radiogroup(p_idx => 1, p_value => c2.a_id, p_selected_value => c2.qa_id, p_attributes => 'id="P2_QUEST_' || i || '"'));
and in processing correspondingly ...
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
FOR c2 IN
(SELECT seq_id,
c001 q_id,
c002 a_id,
c012 qa_id
FROM apex_collections
WHERE c001 = to_char(p_q_id)
AND collection_name = 'ANSWERS'
AND c002 = apex_application.g_f01(i))
LOOP
apex_collection.update_member_attribute(p_collection_name =>
'ANSWERS', p_seq => c2.seq_id, p_attr_number => '12',
p_attr_value => c2.a_id);
END LOOP;
END LOOP;
to me I only use f01 ... f04 say, ... Is it possible that I still hit the max of 50 page-items?
Regards
j.

max number of items exceeded?

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

I have a document that has been "uploading" for a few days now and I can't work on it from my IOS 5 device or my iMac

I have a document that has been "uploading" to icloud from my iPad for a few days and I can not access it from any of my apple devices including my iMac. Anyone else having this problem?

Basically that's the way to go, with some modifications:
Instead of<br>
''1) putting it back as it is 2) then renaming the profile folder''
follow these instructions:<br>
Create a new profile and copy the old one over it.
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it
The same goes for<br>
''4) putting back the whole original backup folder so it creates a second profile''
Make sure to create backups of your profiles.
http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring

How can I find out my PIN number for my old ipad that has been disabled

I need help to find out my old PIN number for my old ipad it has been disabled as I can't remember what my pin is

http://support.apple.com/kb/ht1212

How do I edit and save a word document that has been e-mailed to my ipad

How do I edit and save a word document that has been e-mailed to my ipad and then re-send

Use the paid version (install and activate) of Microsoft Word.
https://itunes.apple.com/sg/app/microsoft-word-for-ipad/id586447913?mt=8

Executing Batch work Item: Transaction brackets of the workflow has been da

Hi,
I am integrating workflow with the HR Processes and Forms using HCM.
The process is new hiring and in configuration I have given the workflow name which is copy of the standard workflow(WS18900008). The event used is draft_created.
When I execute the process and press the Save Draft, everything goes fine, the workflow gets completed but for the step Save Form Data(WS17900260) throws the following error:
Executing Batch work Item: Transaction brackets of the workflow has been damaged.
The task is TS17900108.
Not able to understand what is this error and to which it is related.
Pls help.

Look for SAP Notes as this is SAP standard code.
Short Text
Transaction brackets of the workflow has been damaged
Diagnosis
When executing the workflow with the ID , the transaction brackets were destroyed by a commit command ('C') or a rollback work command ('R'). This command ('') was stopped from the implementation program of the object type. Access takes place, for example, when a condition is evaluated or when the container operation is executed. Access may only have a read character which is why a commit or rollback work command is not necessary.
System Response
The system has written a log entry. Uncontrolled commit or rollback work commands can affect the restart function of the workflow system. This restart function is only necessary in the case of errors. The current workflow instance is executed further.
Procedure
Check the implementation program of the object types and remove the corresponding ABAP instructions.

Error connecting SQL Azure - Network access for Distributed Transaction Manager (MSDTC) has been disabled

Sometimes I have an error connecting SQL Azure. The error occurs in an asp.net application and in a windows service running on VM in Azure. Error details:
System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Transactions.TransactionManagerCommunicationException: Network access for Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for network
access in the security configuration for MSDTC using the Component Services Administrative tool. ---> System.Runtime.InteropServices.COMException: The transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT:
0x8004D024)
   at System.Transactions.Oletx.IDtcProxyShimFactory.ReceiveTransaction(UInt32 propgationTokenSize, Byte[] propgationToken, IntPtr managedIdentifier, Guid& transactionIdentifier, OletxTransactionIsolationLevel& isolationLevel,
ITransactionShim& transactionShim)
   at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
   --- End of inner exception stack trace ---
   at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException)
   at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
   at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx)
   at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx)
   at System.Transactions.EnlistableStates.Promote(InternalTransaction tx)
   at System.Transactions.Transaction.Promote()
   at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction)
   at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts)
   at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx)
   at System.Data.ProviderBase.DbConnectionPool.PrepareConnection(DbConnection owningObject, DbConnectionInternal obj, Transaction transaction)
   at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal&
connection)
   at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
   at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
   --- End of inner exception stack trace ---
   at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
   at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection()
   at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
   at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClassb.<GetResults>b__9()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
   at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
   at System.Data.Entity.Core.Objects.DataClasses.EntityReference`1.Load(MergeOption mergeOption)
   at System.Data.Entity.Core.Objects.DataClasses.RelatedEnd.DeferredLoad()
   at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.LoadProperty[TItem](TItem propertyValue, String relationshipName, String targetRoleName, Boolean mustBeNull, Object wrapperObject)
   at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.<>c__DisplayClass7`2.<GetInterceptorDelegate>b__2(TProxy proxy, TItem item)

Hello,
I am not an expert in MSDTC but as we know,SQL Azure Database does not support
distributed transactions. This means that SQL Azure doesn’t allow Microsoft Distributed Transaction Coordinator (MS DTC) to delegate distributed transaction handling.
One common cause of MSDTC getting involved in Entity Framework applications is the fact that we close and reopen the same connection as needed (i.e. for each query that is executed).To avoid the stack from opening and closing the connection multiple times,
you can simply open the connection explicitly and run the queries in the same connectio.
The following thread is about a similar issue, please refer to:
http://answers.flyppdevportal.com/categories/azure/sqlazure.aspx?ID=d705a8cf-cba4-494c-96f6-96a136bd29e3
What's more, you can also try the workaround that involves setting the Enlist option of the SQL Azure connection to false. For the detail explanation, please refer to:Entity
FrameWork and SQL Azure
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

There is only one thing that happens -- the Server does not respond.
Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?

Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
Please help !!!!

thank you again
We have now got it working!! From: Ned Murphy <[email protected]>
To: V BOOT <[email protected]>
Sent: Thursday, 27 November 2014, 19:55
Subject: Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
Elements 13 for a 32 bit pc has been downloaded onto my 64 bit pc so is useless WHAT CAN I DO?
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionYou need to follow the instructions carefully for the downloads to work. Try using a different browser if you continue to get blank pages. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6967807#6967807 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6967807#6967807 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I get rid of the constant asking for PIN whenever my iPad has been sleeping?

How can I get rid of the constant asking for PIN whenever my iPad has been sleeping?

You can turn it off:
Settings > Passcode > enter your passcode > Turn Passcode Off.
For security's sake, I recommend changing the amount of time that passes before it locks as opposed to turning off completely:
Settings > Passcode > enter your passcode > Require Passcode:
Immediately
After 1 minute
After 5 minutes
After 15 minutes
After 1 hour
After 4 hours

Max Number of items for an FI document (999) has been exceded

Similar Messages

Maybe you are looking for