Dynamic Logon Screen and Dashboards

Is there a way to dynamically display a different style on the logon screen and dashboards based on a condition in the warehouse? For example, if our load is running long, can we change the logon screen to display a graphic and text that states the load is not complete. Apply the same wording to the dashboards.
What is the best practice employed for notifying users that BI is ready or not ready for use?
Thanks!
Eric

Ahhh... 11g ;) I would say a little bit hard the way I was mentioning.
Since 11g uses .html page (FMW\Oracle_BI1\bifoundation\web\msgdb\pages\common\signin.html) unlike 10g. in 10g its .jsp/.asp page!
If possible can try this during user login try to validate the table column W_ETL_RUN_S.STATUS with current date using init block, if the status is not quals to completed then try to set a custom group/role and and land him with a new dashboard based on assigned role with load status, if the status is completed then use wont fall under your custom group/role.

Similar Messages

A popup message in between logon screen and easyaccess

hai
i want to show a popup message displaying
a message which must be again in the logon language
choosen and that popup message should appear immediately
in between the logon screen and the sap easy access screen
i tried, as suggested by sridhar,Alejandro López,Rich Heilman,
by writing simple message for the logon language 'EN' but the ehancement SUSR0001 is not triggering and in the include i added some message type.
can u please check and send me how to execute it
please give me reply as early as possible.
regards
kiran

Hi Kiran,
Go to enhancement SUSR0001 ... then go to Components...
Double Click on EXIT_SAPLSUSF_001 ....Double Click on ZXUSRU01....
Be Careful. sy-langu will be E, so add this code in the end.
IF SY-LANGU = 'E'.
MESSAGE ' YOU HAVE LOGGED IN ENGLISH' TYPE 'I'.
ENDIF.

How to custumized LOGON SCREEN and DefaultFrameworkPage

SDN,
How to custumized LOGON SCREEN and DefaultFrameworkPage
Regards
Ravi

Hi
Logon Screen Customization
http://help.sap.com/saphelp_nw70/helpdata/en/43/fc3ae22adb025fe10000000a1553f7/content.htm
Portal Logon Page
Customizing LogOn Page:
http://help.sap.com/saphelp_nw70/helpdata/en/43/fc3ae22adb025fe10000000a1553f7/frameset.htm
Modifying The Logon Par(or customising the Logon Screen)
Modifying The Logon Par(or customising the Logon Screen)
Customizing the Logon Screens
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
Portal Customizations Intro - Login Part 1
Portal Customizations Intro - Login Part 1
Customizing the Logon User Interface of SAP Enterprise Portal
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/371e9d90-0201-0010-c39c-fd2956154ab3
forum Thread
/thread/840985 [original link is broken]
Thanks

I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this is not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine.

I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine. Can u please help me with this its the only negative I fined with Firefox everything else is AWESOME!! Thanks, Anthony

The driver I have is the most recent version. This is a Firefox problem....fix it!
It works perfectly on Internet Explorer and worked on Firefox before the last update so it's your problem.

Customize BW Web Logon Screens and Functions

Dear Guru's
I have been told to 'Customize BW Web Logon Screens and Functions', can any one please provide me documentation relared for this. I would be great if some explain me what this stuff is?
Thank in advance
Dev
please guru's give me some idea regarding it..
Edited by: Srinivas dev on Apr 25, 2008 2:47 PM
Edited by: Srinivas dev on Apr 25, 2008 3:08 PM

Hi,
Here its.
How toCustomize SAP BW Web logon screens and functions
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
Thanks,
JituK

Changing the look and feel of the logon screen and portal themes.

Dear all,
we got some requirements in the portal where i have implement the following things..
1) when we give the portal url in the browser along with logon screen i have to display the some content related to the organaisation ,,, there i want to do logon screen customization also.
2)once login to the portal i need display the some company related information along with different ESS services .i want to remove the masthead area and in the role area want to display different services.
please guide me to achive this.
the client is not at all happy with present look and feel,
so what we can do t achieve ths?
Thank you in advance.
Swapna

Hi Swapna,
Portalapp.xml is the configuration file of portal application holding comonents and services. Where as authschemes.xml file is used to determin and tell portal which of the user authentication schemes is to be used. It also tells portal about which logon PAR file should be used. It is defined inside following tags.
<frontendtarget>Logon PAR File Name</frontendtarget>.
Take a scenario for example. You have created a custom logon PAR file and made some changes. You cannot see the changes before deploying it. You have to deploy it first. Now, you want that whenever somone logon to portal, your logon PAR should be referred and executed. Authschemes.xml does this work. It maintains a reference to the PAR file that should be used for logon.
Now, still have to create a custom authschemes.xml file and upload it. (Follow this link for the authschemes file location http://help.sap.com/saphelp_nw04/helpdata/en/1a/3afd4e641b8f42ac07bb77fe30375b/content.htm)
Refer this link for details on authschemes.xml file: http://help.sap.com/saphelp_nw04/helpdata/en/d3/1dd4516c518645a59e5cff2628a5c1/content.htm
Let us see in brief what are the steps executed:
1) You request a portal login
2) Portal, after receiving a request, looks for a reference to which Authschemes file to be used. It finds it in Visual Admin
3) Once portal have the name of authschemes file, it parse this file and determin what are the authentication schemes to be used and which logon PAR should be executed.
4) Only after these steps, it renders logon page to you
Once you do all these steps, you can see the result on logon page itself. You do not have to look for deployed PAR file.

How do I modify the logon screen & orcle dashboard with custom images

I want customize the logon page dashboard and also replace ORACLE Dashboard with custom icon. Also I want to remove powered by ORACLE con that appears on presentation/dashboard web pages. Please provide relevant information to achieve this.
Thanks and Regards

You can start here:
http://oraclebizint.wordpress.com/2007/12/11/oracle-bi-ee-101332-customizing-login-screen/

How to display a specific SAP logon screen per system?

Hello,
I woud like to display a logon screen which contains system-specific information, e.g. for the QAS system it would be something like "This system was created by a system copy from PRD on MM/DD/YYYY"...
I have gone through the SAP Note 205487 and my understanding is that I have to create the ZLOGIN_SCREEN_INFO in the development (changeable) system and transport it.
Note 205487 : "Creating/changing this text requires a changeable system. Therefore, for production systems, SAP recommends maintaining the text in the upstream system and then transporting it."
Can anyone please provide me with some hints on how to create a different logon screen for each system and apply them via transport requests?
I prefer not to "open" the QAS system in order to create the logon screen because I would then have to "open" the productive system to create a different logon screen...
Any help is appreciated.
Thanks and Regards,
Michel M.

Hi Michel,
Please refer to below documents for modifying SAP Logon screen and transporting to other system.
[How to customize the login screen|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22219]
[Customizing SAP Login Screen|http://www.abap-tutorials.com/2009/12/30/customizing-sap-login-screen/]
[SAP logon screen, SE61, ZLOGIN_SCREEN_INFO|SAP logon screen, SE61, ZLOGIN_SCREEN_INFO;
Hope it helps
Regards
Arun

Problem while deploying new logon screen par file via NWDS

hi
i have a problem with deploying .par files out of the NWDS.
i want to change the look of the logon screen in our EP Portal (SAP NetWeaver 2004s).
when i just import the (working one) par file into NWDS and deploy it without ANY changes i get then an error when trying to call the portal:
instead of the logonscreen i get some IView error (like IView: N/A).
if i just copy the par file, and put it back to the pcd, everything works fine.
my problem seems to be the "compiling/deploying" via NWDS.
any suggestions?
i followed the guide:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
i followed also the BLOG:
Modifying The Logon Par(or customising the Logon Screen)
and the help:
http://help.sap.com/saphelp_nw04/helpdata/en/23/c0e240beb0702ae10000000a155106/content.htm
thanks for your help.
markus

Markus,
If you import the par file using NWDS, most likely you wouldn't import the associated jar files (I think 2 jars) that are originally part of the par file. So, when you make changes and update your custom jar, it would lack the two jars and your application would fail. Try downloading the par file using System Administration -> Support -> PCD Administration -> Browse Deployment..
Save the jar file on desktop and then import it to NWDS.
Hope this helps,
Kiran

Custom Logon Screen (Branding)

Hi All,
We want to chagne the WebDynpro login screen to achieve the following:
- Custom Logo
- Change Password functionality.
I've located the login war file.
com.sap.security.core.logon.war that contains the logon screen and have changed the JSP accordingly and it has worked.
Does anyone know of a better way to change this?
Regards,
Michael

Hi,
The actual way of doing the Branding is as follows
1. get the com.sap.portal.runtime.logon.par.bak in the irj deployed folder.
2. remove the .bak.
3. import it in the NWDS, do the changes in the jsp pages of login, logout, etc.
4. make the par
5. upload the same
6. if you change the par name and uploaded then u need to do the changes to the authscheme.xml in the configtool, configuration
7. restart the server.
8. your changes are done.
PS: Please take the com.sap.portal.runtime.logon.par.bak backup, if you gone wrong., then do upload it
Thanks & Regards,
Ragahvendra Pothula

Logon screen represented less than 2880x1620 when set up in full resolution

Hello
I had to reinstall my new W540 20BG with Win7 Ultimate from scratch and integrated also all current drivers. So I had no problems.
I have set the highest resolution of 2880x1620. Now on the logon screen the Windows background picture will appear smaller (approximately about 2048x1152). If I change the resolution to 2048x1152 or smaller, then the picture fills the screen. If needed I can take a photo from the logon screen and upload it.
I tried to find any settings by NVidia driver, nothing found, nothing have effects.
a) Whats is the reason for this issue?
b) How I can fix it?
Could someone help me? Thanks.
Best regards.

Maybe I'm wrong, but the best option would be to work with percentages, not pixels.
You can see examples in this Adobe links:
CSS Percentage vs. Pixels - Re: How can convert the em,px,pt and % in css - CSS Width percentage layout issues - Re: DW CC Fluid grid layout how to change px width for desktop layout
I hope it has been helpful
sorry, I forgot this link in Adobe site: Ten things you need to know about responsive design | Adobe Developer Connection
See you,
Masters and MBA

Question about logon screen

i have this weird problem - i searched the forums but couldnt find any answer - im on 10.7 Lion - sometimes my mac goes into a state where it goes back to the logon screen and i have to enter my password to unlock the mac - this interferes with some remote access software i have which doesnt work if the mac is locked
i dont have Require Password for sleep and screen saver checked in the Security and Privacy preferences - and ive looked at other preferences for s setting that controls this - but couldnt find any
does anyone know what causes this and how to turn it off?

Hello CG,
I think you can pre-define your language, using the parameter 'BspLanguage', in the the url defined at 'Error Pages' of BEX service.
An example:
/sap/public/bsp/sap/system/login.htm?sap-url=<%=PATHTRANS%>&BspLanguage=EN
You can also do other things, such pre-define the client, or show the option to change the password.
An example:
Run default.htm of BSP system_public, to know the parameters available.
/sap/public/bsp/sap/system/login.htm?sap-url=<%=PATHTRANS%>&BspClient=010&BspChangePasswordVisible=X
Kind regards.

Logon screen during transport of a change request

Hi Gurus,
When I have do a transport of a change request from our development system to our quality system some users get a logon screen and some users not.
I think it's because of some authorization.
Can anybody tell me which role I need ??
GJ

Hi
some users have permission to import transports (Auth object S_CTS_ADMI) in the target client.
If another user has no authorization, charm tries to import via client 000 -> logon screen appears if current user has no permission to logon via trusted rfc to client 000
Another possibility is to give user TMSADM the authorization to import in client 000. So all users can import.
regards andy

Deploying Custom Windows 7 Logon page and switch user button

I am trying to use ZCM 11 Group Policy management to do two things. 1). Turn off the Windows 7 switch user feature that exists in the start menu and at the initial logon screen, and 2). Add a policy statement graphic to the initial logon screen in Windows 7.
Feature 1 above is done by changing 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon. But in order to get rid of the 'Switch User' button on the initial logon screen you also have to enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options and we only want this enabled for students. There are only two options for this setting - 'enabled' and 'disabled'.
Feature 2, adding a graphic to the initial logon screen, is turned on by enabling 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon and creating a custom bmp file placed in C:\Windows\System32\oobe\info\.
Because the 'Interactive logon: Do not display last user name' setting only has enable/disable options (the default is disable) and because user associated settings overwrite workstation associations Im using two policies, one workstation and one user as inidcated below:
User GPO :
Enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options
NOTE: This allows me to differentiate between student and staff users.
Workstation GPO:
Enable 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon
Enable 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon
Bundle:
Deploys the bmp file to C:\Windows\System32\oobe\info\.
Unfortunately, this setup only works as intended when the user is set up with a volatile DLU policy. When the user associated DLU is non-volatile it doesnt display the graphic and it does not remove the switch user button on the main logon screen. If I logon/logoff as a non-volatile user I get the generic Windows 7 logon page with the switch user button visible, when I logon/logoff as a volatile user I get the custom graphic logon page without the switch user button. Whats even stranger is that when I go into gpedit.msc and look at the settings after I log in, theyre correct for each type of user.
Does anyone have any insight on why I might be seeing this problem?
Ive tried to be complete as possible describing the problem but if didnt describe something correctly or someone needs additional info, please let me know.
Thanks for any assistance.
Dan

Hi Dan,
are you using Novell CLient?
The Tiles on the Login Screen also depend on the Client configuration. If there is only Novell CLient active Windows cannot display other tiles or switch user.
regards
MArkus
Originally Posted by dlietz
I am trying to use ZCM 11 Group Policy management to do two things. 1). Turn off the Windows 7 switch user feature that exists in the start menu and at the initial logon screen, and 2). Add a policy statement graphic to the initial logon screen in Windows 7.
Feature 1 above is done by changing 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon. But in order to get rid of the 'Switch User' button on the initial logon screen you also have to enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options and we only want this enabled for students. There are only two options for this setting - 'enabled' and 'disabled'.
Feature 2, adding a graphic to the initial logon screen, is turned on by enabling 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon and creating a custom bmp file placed in C:\Windows\System32\oobe\info\.
Because the 'Interactive logon: Do not display last user name' setting only has enable/disable options (the default is disable) and because user associated settings overwrite workstation associations Im using two policies, one workstation and one user as inidcated below:
User GPO :
Enable 'Interactive logon: Do not display last user name' in Computer Configuration=>Windows Settings=>Security Settings=>Local Policies=>Security Options
NOTE: This allows me to differentiate between student and staff users.
Workstation GPO:
Enable 'Hide entry points for 'Fast User Switching' in Computer Configuration=>Administrative Templates=>System=>Logon
Enable 'Always use custom logon background' in Computer Configuration=>Administrative Templates=>System=>Logon
Bundle:
Deploys the bmp file to C:\Windows\System32\oobe\info\.
Unfortunately, this setup only works as intended when the user is set up with a volatile DLU policy. When the user associated DLU is non-volatile it doesnt display the graphic and it does not remove the switch user button on the main logon screen. If I logon/logoff as a non-volatile user I get the generic Windows 7 logon page with the switch user button visible, when I logon/logoff as a volatile user I get the custom graphic logon page without the switch user button. Whats even stranger is that when I go into gpedit.msc and look at the settings after I log in, theyre correct for each type of user.
Does anyone have any insight on why I might be seeing this problem?
Ive tried to be complete as possible describing the problem but if didnt describe something correctly or someone needs additional info, please let me know.
Thanks for any assistance.
Dan

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

Dynamic Logon Screen and Dashboards

Similar Messages

Maybe you are looking for