A problem was encountered when i access GuiTableControl in GuiScripting

Hi everybody.
I have a GuiTableControl in a sap transaction that i need bring the content of every row to exteranl via GuiScripting.
i already tryed with rows.count collection or with the verticalscrollbar sub component but i only get the content of totally visible rows,
i have tried do bellow
via page down action jump to next page
      Session.findById("wnd[0]").sendVKey(82)
      ' guiTab =GuiTableControl
      guiTab.GetCell(0,0).Text.Trim()    '<--- Error
i think
But i can not catch the status of GuiTableControl ( Ready/Not) , Then a error will be raised
when i ready the first now in the new page.
any idea ?
Thanks
Justin

Hi Tom,
Thanks for giving me direction. I am student and totally new to this hyper-v, so bit slow in understanding right now
This is the location of the files when i had extracted from rar file
Directory of C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CL1
06/13/2014 07:54 AM    <DIR>          .
06/13/2014 07:54 AM    <DIR>          ..
03/16/2013 12:05 AM    <DIR>          Snapshots
06/13/2014 07:25 AM    <DIR>          Virtual Hard Disks
06/13/2014 06:25 AM    <DIR>          Virtual Machines
03/15/2013 07:38 PM               135 VM-Pre-Import-10961A-LON-CL1.bat
               1 File(s)            135 bytes
               5 Dir(s) 477,346,160,640 bytes free
when I opened the bat file -- location of the file
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\Base\Base12B-W8.vhd"
pause
and then i have changed the dir path to
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CLI\Base12B-W8.vhd"
pause
When I tried to run the batch file then I got following message -- Can't creat a file when that file already exists.
Please advise

Similar Messages

After i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory

When looking at the module for a LabVIEW VI being called from TestStand, I get the following message:
A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory. Please reinstall it or repair it.
I made the mistake of cleaning up C: in my computer. Cleaning C:\National Instruments Downloads
Why would someone put bits of applications or modules, etc in such a directory?
I am not too crazy about restoring 11GB back into that folder. That's just insane!
Has anyone encountered this before? Any "easy" solutions? apart from re-installing TS...
Side note: I did not touch anything in the \Program Files|National Instruments\TestStand\AdapterSupport\LabVIEW
Solved!
Go to Solution.

Thanks PH,
I also had that. Fixed it.
I will not remove the ones in the NI downloads folder.
I will eventually need to remap everything to the appropriate drive.
I partition the drives into:
C:\     Windows and associated folders. Mostly OS stuff
E:\     Applications (this is where it will end up)
F:\     Files
G:\    Storage
H:\    Backups
I try to do what I normally implement in Linux. I hate sharing the OS with everything else.
Cheers,
RayR

BB 9900 - Activation failed. An error was encountered when sending the activation transmission

Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil K

sunilkesavareddy wrote:
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan.

A problem was encountered while trying to send information over the Internet.

I have CS3 - Design Premium.
I had it installed on my old computer which crashed and was reformatted. I have a new computer now and am trying to install it again but I am getting an error that says:
Registration Unscuccessful
A Problem was encountered while trying to send information over the internet.
My internet is obviously working since this is the same computer...

I was getting the error “Registration Unsuccessful”, “A problem was encountered while trying to send information over the Internet” at start-up of "Acrobat 8 Pro" on Windows 8.1.
Setting compatibility on the .exe file to "Windows XP, Service Pack 3" didn't work for me. The problem persisted.
I was told by someone at Adobe support (by chat) to try this, but this didn't work either:
1. Disconnect your Internet connection by disconnecting the cable or by　turning off Wi-Fi.
2. Relaunch the Adobe application.
3. When the registration prompt appears, select "Never Register."
4. Connect to the Internet.
I finally made the error at start up go away as follows:
First I found that if I run the Acrobat.exe file as Administrator it doesn't give the error. (I do have to approve a user account control to do this.) I right clicked the actual Acrobat.exe file and selected "Run as administrator". You may be able to also right click the icon on you desktop and do the same.
While running the application as Administrator, I then tried a few things: Clicking “Never Register”, and “Deactivating” and “Reactivating” the license, and then clicking “Never Register” again... while running the application as Administrator. Some combination of those actions seems to have cleared up the problem for when I run the application with normal privileges.

I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard

I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbers

Moving this discussion to the Acrobat Installation & Update Issues forum.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

APP-PAY-51119: Error was encountered when processing Element Type US_TAX_VE

Hi.,
Getiing Error while running the quickpay request.
Application :11.5.10.2
Database :10.2.0.5
OS : HP UX
Error
HR_51118_HRPROC_ERR_OCC_ON_ASG
ASGNO 179279
APP-PAY-51118: Error was encountered when processing assignment 179279
HR_51119_HRPROC_ERR_OCC_ON_ET
ETNAME US_TAX_VERTEX
APP-PAY-51119: Error was encountered when processing Element Type US_TAX_VERTEX
Invalid jurisdiction code found in primary work location

Please see (Payroll Process Fails: FORMULA_ERROR_TEXT A compiled version of the formula 431 cannot be found Compiled Version of formula cannot be found [ID 358881.1]).
Thanks,
Hussein

Upgraded to iTUNES 10.5 on PC running XP. Cannot get it to start. when I try, window appears, hourglass cursor still present, then I get a message saying a problem was encountered and it has to close. have tried everything suggested on apple site,

cannot get iTUNES 10.5 to run on PC w/ XP after upgrade. Window opens, but cursor stays as hourglass and I eventually get an error message saying it has encountered a problem and has to close. I've tried everything suggested on the Apple site, included complete uninstall several times.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

A problem was encountered opening a virtual hard disk in the chain of differencing disks -- when try to import vm in hyper v

Hi All,
I am new to the hyper V stuff. I have managed to install hyper-V on Windows 8. Now I am trying to import VM which got three foleders and one file batch file
Snapshots
Virtual Hard Disks
Virtual Machines
VM-Pre-Import 10961A-LON-CL1 (Batch file)
but I am getting this error
Please help me.
Thanks

Hi Tom,
Thanks for giving me direction. I am student and totally new to this hyper-v, so bit slow in understanding right now
This is the location of the files when i had extracted from rar file
Directory of C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CL1
06/13/2014 07:54 AM    <DIR>          .
06/13/2014 07:54 AM    <DIR>          ..
03/16/2013 12:05 AM    <DIR>          Snapshots
06/13/2014 07:25 AM    <DIR>          Virtual Hard Disks
06/13/2014 06:25 AM    <DIR>          Virtual Machines
03/15/2013 07:38 PM               135 VM-Pre-Import-10961A-LON-CL1.bat
               1 File(s)            135 bytes
               5 Dir(s) 477,346,160,640 bytes free
when I opened the bat file -- location of the file
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\Base\Base12B-W8.vhd"
pause
and then i have changed the dir path to
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CLI\Base12B-W8.vhd"
pause
When I tried to run the batch file then I got following message -- Can't creat a file when that file already exists.
Please advise

I keep getting the error message, "A problem was encountered while trying to send information over the Internet." when I try to activate Acrobat 8.1. How do I fix this?

I have already verified that we have not exceeded the two allowed activations, yet it seems that the Activation server won't connect. Is there a work around for this?

Hello,
Try following step and check if issue gets resolved or not.
Find Acrobat.exe on your computer. Right click the program and click 'Troubleshoot Compatibility'. Set the compatibility to Windows XP service pack 3.
Regards,
Anoop

The problem is encountered when we try to open the file from external vendor.

We are using Adobe illustrator CS3 with Patch 13.0.2. in MAC PC with OS 10.4.11. We tried to open the file generated from external vendor. This file is made by CS4/CS5 & downgraded to CS3 because we are using different version of CS package.
When we try to open such as file. It takes some time to open it. But after a while, the application illustrator has unexpectedly quit & crash report is generated. Any expert can help to look at the problem.

Just a bad file.
No telling what specifically may be the issue without seeing the original file as compaired to the CS3 file.

A problem was encountered while processing the fol...

Has anyone encountered this before ?
The above message was generated and then my PC files in that folder were all erased.
I'm using 7.1.30.9 and WinXP Home SP 3.
Thanks.

I'm synching file which could be a few MB. But this does not happen all the time. And if the data is hugh, should it just stop synching or synch slowly, instead of deleting all the files ?
My software version is 30.019
Hey, Thanks for your help.

My keyboard backlight not working even after resetting smc nd nvram, this problem was encountered after i upgraded my memory.

help guys

Does the keyboard backlighting if you reinstall the original RAM?
Perhaps you inadvertently disconnected a cable when you installed the new RAM. An appointment at an Apple store genius bar may be a good option.
Ciao.

A problem was encountered when i access GuiTableControl in GuiScripting

Similar Messages

Maybe you are looking for