A problem was encountered opening a virtual hard disk in the chain of differencing disks -- when try to import vm in hyper v
Hi All,
I am new to the hyper V stuff. I have managed to install hyper-V on Windows 8. Now I am trying to import VM which got three foleders and one file batch file
Snapshots
Virtual Hard Disks
Virtual Machines
VM-Pre-Import 10961A-LON-CL1 (Batch file)
but I am getting this error
Please help me.
Thanks
Hi Tom,
Thanks for giving me direction. I am student and totally new to this hyper-v, so bit slow in understanding right now
This is the location of the files when i had extracted from rar file
Directory of C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CL1
06/13/2014 07:54 AM <DIR> .
06/13/2014 07:54 AM <DIR> ..
03/16/2013 12:05 AM <DIR> Snapshots
06/13/2014 07:25 AM <DIR> Virtual Hard Disks
06/13/2014 06:25 AM <DIR> Virtual Machines
03/15/2013 07:38 PM 135 VM-Pre-Import-10961A-LON-CL1.bat
1 File(s) 135 bytes
5 Dir(s) 477,346,160,640 bytes free
when I opened the bat file -- location of the file
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\Base\Base12B-W8.vhd"
pause
and then i have changed the dir path to
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CLI\Base12B-W8.vhd"
pause
When I tried to run the batch file then I got following message -- Can't creat a file when that file already exists.
Please advise
Similar Messages
-
Error adding VM through Powershell: Virtual hard disk in the chain of differencing
I'm trying to programmatically create a VM from a .vhd file - my code is below. I'm getting a weirdo file not found error about disk chaining, but I've TRIPLE checked all my paths. Help is much appreciated!!!
Thanks,
Error:
ADD-VMHardDiskDrive : 'Testing' failed to add device 'Virtual Hard Disk'. (Virtual machine ID ADC7CF7D-2EC5-4428-B27C-6EDCF29F5922)
Failed to open virtual disk 'E:\will\VMTesting\Flash.480x800.vhd'. A problem was encountered opening a virtual hard disk in the chain of differencing
disks, 'E:\will\VMTesting\Flash.vhd' (referenced by 'E:\will\VMTesting\Flash.480x800.vhd'): 'The system cannot find the file specified.' (0x80070002).
My PowerShell code:
$n = "Testing";
$directory = "E:\will\VMTesting";
$vhdxPath = "$directory\$n.vhdx";
$vhdPath = "$directory\Flash.480x800.vhd";
$vm = Get-VM $n;
if($vm -ne $null) { Remove-VM $n -Force; }
New-VM -Name $n -MemoryStartupBytes (Invoke-Expression "1000MB") -Path $directory;
Set-VMMemory -VMName $n -DynamicMemoryEnabled $true -MinimumBytes 512MB -MaximumBytes 4096MB -StartupBytes 2048MB -Buffer 20;
ADD-VMHardDiskDrive -VMName $n -Path $vhdPath;
Start-VM $n;Hi Will ,
According to the error message , please try to check the chain of differencing disk via "inspect disk.." .
# Create our New Differencing Disk
New-VHD –ParentPath T:\02R2June2012\08R2TemplateJune2012.vhdx –Path T:\lab50\lab50-PSDiffDiskVM\lab50-PSDiffDiskVM.vhdx -Differencing
For creating a differencing disk please refer to following link:
http://lyncdup.com/2012/06/creating-hyper-v-3-differencing-disks-in-server-2012-with-gui-and-powershell/
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
A problem was encountered while trying to send information over the Internet.
I have CS3 - Design Premium.
I had it installed on my old computer which crashed and was reformatted. I have a new computer now and am trying to install it again but I am getting an error that says:
Registration Unscuccessful
A Problem was encountered while trying to send information over the internet.
My internet is obviously working since this is the same computer...I was getting the error “Registration Unsuccessful”, “A problem was encountered while trying to send information over the Internet” at start-up of "Acrobat 8 Pro" on Windows 8.1.
Setting compatibility on the .exe file to "Windows XP, Service Pack 3" didn't work for me. The problem persisted.
I was told by someone at Adobe support (by chat) to try this, but this didn't work either:
1. Disconnect your Internet connection by disconnecting the cable or by turning off Wi-Fi.
2. Relaunch the Adobe application.
3. When the registration prompt appears, select "Never Register."
4. Connect to the Internet.
I finally made the error at start up go away as follows:
First I found that if I run the Acrobat.exe file as Administrator it doesn't give the error. (I do have to approve a user account control to do this.) I right clicked the actual Acrobat.exe file and selected "Run as administrator". You may be able to also right click the icon on you desktop and do the same.
While running the application as Administrator, I then tried a few things: Clicking “Never Register”, and “Deactivating” and “Reactivating” the license, and then clicking “Never Register” again... while running the application as Administrator. Some combination of those actions seems to have cleared up the problem for when I run the application with normal privileges. -
I have already verified that we have not exceeded the two allowed activations, yet it seems that the Activation server won't connect. Is there a work around for this?
Hello,
Try following step and check if issue gets resolved or not.
Find Acrobat.exe on your computer. Right click the program and click 'Troubleshoot Compatibility'. Set the compatibility to Windows XP service pack 3.
Regards,
Anoop -
I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbersMoving this discussion to the Acrobat Installation & Update Issues forum.
-
When looking at the module for a LabVIEW VI being called from TestStand, I get the following message:
A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory. Please reinstall it or repair it.
I made the mistake of cleaning up C: in my computer. Cleaning C:\National Instruments Downloads
Why would someone put bits of applications or modules, etc in such a directory?
I am not too crazy about restoring 11GB back into that folder. That's just insane!
Has anyone encountered this before? Any "easy" solutions? apart from re-installing TS...
Side note: I did not touch anything in the \Program Files|National Instruments\TestStand\AdapterSupport\LabVIEW
Solved!
Go to Solution.Thanks PH,
I also had that. Fixed it.
I will not remove the ones in the NI downloads folder.
I will eventually need to remap everything to the appropriate drive.
I partition the drives into:
C:\ Windows and associated folders. Mostly OS stuff
E:\ Applications (this is where it will end up)
F:\ Files
G:\ Storage
H:\ Backups
I try to do what I normally implement in Linux. I hate sharing the OS with everything else.
Cheers,
RayR -
after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.
Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. -
Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...
hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!
-
I have a VAIO pc and want to put some photos up to iCloud to then go onto my iPad.
I have iCloud control panel and have followed the instructions.
Everything is on that should be on .. on the iPad and pc.
but I cannot find how to ...
Select Photo Stream under Favorites. Open My Photo Stream. Click the "Add photos" button. Select photos to import to My Photo Stream, and then click Open. ...
as advised in FAQ on iCloud.
I cannot find favourites ... sorry !!!
I use Google Chrome, could that be the problem?
The Apple shop were very sweet, but sent me home with instructions .........
Please help
CarskiIt should look like this...
Open Windows explorer, select Photo Stream under Favorites on the left sidebar:
Click on Photo Stream, then to the right double-click on My Photo Stream. Click on Add Photos on the top the menu bar:
Select the photos you want to import, then click Open. -
A problem was encountered when i access GuiTableControl in GuiScripting
Hi everybody.
I have a GuiTableControl in a sap transaction that i need bring the content of every row to exteranl via GuiScripting.
i already tryed with rows.count collection or with the verticalscrollbar sub component but i only get the content of totally visible rows,
i have tried do bellow
via page down action jump to next page
Session.findById("wnd[0]").sendVKey(82)
' guiTab =GuiTableControl
guiTab.GetCell(0,0).Text.Trim() '<--- Error
i think
But i can not catch the status of GuiTableControl ( Ready/Not) , Then a error will be raised
when i ready the first now in the new page.
any idea ?
Thanks
JustinHi Tom,
Thanks for giving me direction. I am student and totally new to this hyper-v, so bit slow in understanding right now
This is the location of the files when i had extracted from rar file
Directory of C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CL1
06/13/2014 07:54 AM <DIR> .
06/13/2014 07:54 AM <DIR> ..
03/16/2013 12:05 AM <DIR> Snapshots
06/13/2014 07:25 AM <DIR> Virtual Hard Disks
06/13/2014 06:25 AM <DIR> Virtual Machines
03/15/2013 07:38 PM 135 VM-Pre-Import-10961A-LON-CL1.bat
1 File(s) 135 bytes
5 Dir(s) 477,346,160,640 bytes free
when I opened the bat file -- location of the file
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\Base\Base12B-W8.vhd"
pause
and then i have changed the dir path to
SET SUBDIR=%~dp0
mklink "%SUBDIR%Virtual Hard Disks\Base12B-W8.vhd" "C:\Program Files\Microsoft Learning\10961\Drives\10961A-LON-CLI\Base12B-W8.vhd"
pause
When I tried to run the batch file then I got following message -- Can't creat a file when that file already exists.
Please advise -
I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.
My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action. -
Normally my phone would connect with my computer and replace all the songs on my phone with all the songs available in my library. Now it seems as if the songs on my phone are permanently there, and nothing from my iTunes library will sync. I tried syncing with another library on another computer and nothing would sync onto my iPhone from that one either. I feel like it's a problem with the phone, not the iTunes, but I'm not sure. Ive been trying things for the last 8 hours. Why won't my music sync to my phone??
1. Open iTunes.
2. Click the View option in the iTunes menu.
3. Select the Show Sidebar option.
Connect your phone, select it in the Sidebar...the various tabs will now show as before. -
cannot get iTUNES 10.5 to run on PC w/ XP after upgrade. Window opens, but cursor stays as hourglass and I eventually get an error message saying it has encountered a problem and has to close. I've tried everything suggested on the Apple site, included complete uninstall several times.
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
A problem was encountered while processing the fol...
Has anyone encountered this before ?
The above message was generated and then my PC files in that folder were all erased.
I'm using 7.1.30.9 and WinXP Home SP 3.
Thanks.I'm synching file which could be a few MB. But this does not happen all the time. And if the data is hugh, should it just stop synching or synch slowly, instead of deleting all the files ?
My software version is 30.019
Hey, Thanks for your help. -
help guys
Does the keyboard backlighting if you reinstall the original RAM?
Perhaps you inadvertently disconnected a cable when you installed the new RAM. An appointment at an Apple store genius bar may be a good option.
Ciao.
Maybe you are looking for
-
Problem with uninstalling skype toolbar..!!
I cannto delete my skype toolbar,and for that i cannot reinstall it...and when i try to sign in...i can't...because the toolbar cannot be installed for the previous one...
-
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/946117]]</blockquote> I have reset the routers, replaced with wireless router, checked the firewalls on Windows (turned off), checked Kaspersky Pure settings, did a fix on K
-
Website design... need some help
I have a website and my conversion rate is verry verry low. I have tryed all kinds of things but can;t seem to get people's attention. Please give me some suggestions of what could I improove to get people to convert. The website is : http://www.dnmw
-
Can't start application server in Netbeans
when I run the application server from the netbeans, i get this pop up message " The Sun Java Application Server 8.1 couldnt start. More insformation about the cause is in the server log file. Posssible reasons include -port conflicts.(use netstat -a
-
I purchased a song and its says it's the song but when played its not the right song how do I get my money back?