A report which displaies orders discerning SETTLED/NOT SETTLED

Hi All,
Could anyone show me a report which displaies the orders (and type orders) discerning between the orders settled and the ones not settled?
Thanks
Gandalf

You can try using KOC4 . This is not exactly which are you are looking for ,but this report definately is helpful for your analysis whethere the cost has been settled or not .
regards
Ranjan

Similar Messages

  • A report which displaies Bank Incoming payments for each Customer

    Hi All,
    could anyone show me a report which displaies the Bank Incoming payments for each Customer?
    Thanks
    Gandalf

    Yes u can very well see the Off setting account ( Bank account number ) in the line item report.
    For that small customization is requiered so as to activate the off setting account display in all line item report.
    Just implement the below changes
    NodeFinancial Accounting
    PathIMG u2192 Financial Accounting u2192 Financial Accounting Global Settings u2192 Business Transaction Events
    1                    Active Settings
    Setttings u2192 Products u2192 u2026 of a customer
    Following new product added and activated:
    Product                        -            OFF
    Text                 -            Offsetting account
    Active               -            Yes
    Setttings u2192 P/S Function Modules u2192 u2026 of a customer
    Following new event added:
    Event                      -           00001650
    Product                                    -            OFF
    Ctr                               -            (Leave Blank)
    Appl.                            -            (Leave Blank)
    Function Module -            LINE_ITEMS_GET_GKONT
    The above settings enable the function module for displaying the offsetting account in line item display.
    Ritesh

  • Reports which generate Excel output do not open under ie8/Oracle Forms

    Hello,
    we run Oracle Forms (regardless whether under Jinitiator 1.3.1.22(28) or SUN JVM) and generate Excel output with Oracle Reports (web.show_document). This works well under Internet Explorer 6 (ie6) but not under Internet Explorer 8 (ie8).
    The effect ist that a new browser window opens and closes very quickly without anything further happening.
    I honestly assume that this has not to do with oracle reports but ask this nevertheless in this forum as there might be people which made the same experiences...
    I additionally found out that the same problem exists when gerenating excel or ms word output via a db procedure (with http. modules). There I found that suppressing the question (open/save/cancel) before opening a file (via the windows explorer file type association menu) helped with excel and ms word output (but this might be regarded as a not satisfying workaround).
    The problem persists with other applications' file types than XLS or DOC which are also correctly registered on the client.
    I'm not sure whether mimetypes sent along with the files (which were obviously correct with ie6) play a role in this problem.
    Peter

    Hello,
    Your problem with IE 8 seems to be similar to the one discussed here :
    IE7 windows opened and closed immediatly
    http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Interne
    t_Explorer/Q_23304982.html
    You can test the solution suggested :
    We have found the setting that we needed, under the Internet Options
    Security tab, if you select the internet zone, and click the custom level
    button, then scroll down to the Downloads section, the first option is
    Automatic prompting for file downloads, setting this to enable keeps IE 7
    from interfering with this sort of download.
    Example with screen shots :
    http://www.celt.iastate.edu/webct/securitysettings.html
    Regards

  • For which Purchase Orders MR11 is not yet run.

    Hi folks!!
    I want to know, as of today for which POs MR11 is not yet run.
    Best regards.

    As we are doing posting in a separate G/L. so we go into the detailed view of g/l account and downloaded all the POs.
    Best regards,

  • Report on Internal orders not settled

    HI All,
    I need a report on the open internal orders which are yet to be settled.
    Thanks
    Z

    Hi,
    You can check the following standard report;
    S_ALR_87012995 - List: Orders
    If any Order shows a balance in the Actual column that means either it is not settled or there are still balances which can be settled. A zero in Actual means that the order is fully settled for the reporting period.
    Thanks,

  • How to see the Orders which were not settled

    Hi,
    I need to see the Production Orders which were not settled till now. Please provide me the transaction code for this...
    Thanks
    KB
    Moderator: Please, search SDN; you can use any standard report for orders to see the balances

    Hi,
    The purpose of In-Place hold is to use the Recoverable Items folder to preserve items.
    When user deletes items from Deleted Items folder, these items will go to Deletions which is a subfolder of Recoverable Items folder. After items exceed the deleted item retention period, they are moved to Purges subfolder and they will be retained until
    you remove hold.
    Here is an article which can help you to understand In-Place Hold for your reference.
    http://technet.microsoft.com/en-us/library/ff637980(v=exchg.150).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • List of Orders - Fully settled / Partially settled / Not yet settled

    Hi All,
    Is there any standard report which gives the list of all those PM orders which are related to settlement.
    i.e.  Fully settled / Partially settled / Not yet settled
    I tried to see the report in IW39 by comparing the fields such as 'Total actual costs'  and 'Total settlement', but the 'Total settlement' field is always having the value as 0.00, irrespective of whether the order was fully settled / partially settled / not yet settled.
    Any help on this is appreciated.
    Thanks in advance. JK

    Fantastic Pete !
    I was able to get the answer throughy the foll. T Code / Report:
    1. KOC4: Order selection
    2. S_ALR_87013015: List: Actual Debit/Credit
    Many thanks for the help.
    Best Regards
    JK

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • Sales Orders Report which are invoiced

    Hi gurus,
    I want to take a report of Sales orders which are invoiced. Its order related invoice.
    Eg.
    from 01.04.2008 to 30.04.2008 I created 120 Sales orders, out of 120 i created invoices for 80 Sales orders. Now i want the report of the Sales orders(80) which are invoiced. How can we get this report.
    In VA05 Report we can find out open & all sales orders, but we cant find this report. other than this any report is there, please let me know.
    Cheers,
    Sumith

    Hi,
    1. You can use VA05, to find out the list of orders out of those 120 orders which are not yet invoiced. Thus you will know the invoiced orders.
    2. In this way, go to table VBAK to get the list of 120 orders you have created.
    Give these 120 orders in VBUK table as preceeding document adn find the follow on documents which are of document category M. This will give the list of orders adn the invoice numbers created for them.
    Now the rest of the orders are open orders.
    Hope thsi helps you
    Pls reward if it helps you

  • SAP report which display PO nos based  on cost center, Internal orders

    Hi.
    I am looking for a report in MM which will display the list of purchase orders for a cost center, Internal orders etc.
    The report output should have ALV grid format,The output of the report should have material no or short text, PO quantity, PO Price, PO value. GR qty, GR value,IR qty, IR value, G/L to which consumption has posted etc.
    Reports ME2K, MB5S, ME80FN do not show the G/L account to which GR value is posted.
    Basically I am looking for a existing report which is readily available.

    Hi
    I dont think there is standard report. we have developed custom report one of my previous project.
    YOu can try a abap query using tables EKKO, EKPO, EKBE and EKKN.
    regards
    Srinivas

  • Report which shows TECO orders by date

    Is there a report which shows by date which orders have been TECO ed. for example I would like to know which orders were technically completed on 5th of august by Plant
    thanks a lot

    John,
    I am not aware of such a report.
    Technical completion date exists in table AUFK (field IDAT2).  Easiest solution, for quick and dirty information, you could just browse the table using SE16.
    Next easiest solution would be to create a query.  I usually give the users a basic productionorder query when CO26 is not enough.  Create the infoset in SQ02.  Join tables AUFK, AFKO, and AFPO for basic production order data.  Then, create the query in SQ01 using the infoset you just created.
    If these solutions do not meet your needs, then you will have to commission a Z report.  Spec it out & hand it off to the ABAP developers.
    Rgds,
    DB49

  • FS10N  Report layout Order and Asset not display

    Hi Expert,
    while run T.Code FS10N , we need Order and Asset details from standard layout after select and copy and execute it.. Order and Asset value not showing.. it showing blank field, while Asset Number and Internal Order also there . in Capitalized on Asset GL A/c.
    Kindly help in this regard.
    Kind regards
    Pranav Kr. Gupta

    Pranav,
    you entered in FS10N and hit twice to get details, then you are in line item report from FS10n similar to FBL3n. In this report you display only what you have in line item screen. You don't have Cost Object in this instance since this line item is balance sheet account.
    You have to develop a report which fetches from PO tables
    Check below transaction and enter you document number in dynamic selection:
    S_ALR_8701228
    Here you can see differences among line items and cost assignment.

  • Order Settlement not happening

    Hello All,
    While settling a TECO ed Process order ( wich is not fully delivered), system is not settling it & giving a error message 'Order doesn't have status delivered <b>or</b> TECO.
    And even SAP Help says either TECO or ELV is mandatory.
    please suggest a way to Settle a order which is not Delivered but TECOed. As there will be a lot of orders, its not possible to activate DLV for each order individually.
    Regards
    Mahesh

    Hi Mahesh,
    I dont agree with the concept that "TECO" or "DLV" status is required only then settlement can be done. This is valid if the default rule in Controlling-Tab of  "Order Type dependent parameters"(OPL8) is "PP1".
    If this is changed to "PP2" you are allowed to settle the cost periodically, without  "DLV" and "TECO" status.(Some cost should exist, interms of GI or Confirmation for the period)
    I would suggest you to discuss this with FICO consultant in your project before making the changes.
    Hope this will resolve the problem......Reward your points,
    Regards,
    Prasobh

  • Can not view/export a report which has 2 group by field when no data found

    Recently I developed a report, which contains 2 group by fields. it runs successfully when the report displays some data.
    but when there is no data, i cann't view/export this report.
    It shows nothing by html format and shows "this file cannot be opened because it has no pages" message by pdf format.
    even there is no records for this report, i still want to see the template file and show some basic information.
    please help me.
    Daniel

    I've found that, just like I used to do in Oracle Reports, if you put in a COUNT column to count your returning rows, you can put 'No Data Found' when there's no data. That way, your report will return and not error out.
    For .pdfs, this is the code I use; COUNT with code of <?if:count(field_name)=0?>.
    In the .rtf..
    COUNT
         No Data Found     
    END COUNT
    Put this in the .rtf before your data should appear or else it won't work.
    Hope this helps!
    Kris

  • Can we add a new column in report which is not in table.

    Hi All,
    Can we create a new column in report which is not in table.
    I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
    Regards
    Edited by: User_Apex on May 16, 2011 5:54 AM

    Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
    Then the adding a column in the query would be your best best...
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.
    If this question is answered, please mark the thread as closed and assign points where earned..

Maybe you are looking for

  • I have updated adobe reader many times on my mac but still can't seem to use it when on the internet

    help!

  • FCE4 and iDVD Anamorphic Ken Burns

    I created a 60min movie in iMovie8 using three media: 1) NTSC Anamorphic DV from a Panasonic PV-GS80, 2) JPEG 2816x2112 stills from a Panasonic DMC-FX3, and 3) 848x480 motion JPEG video from the DMC-FX3. An iMovie 8 project in 16:9 aspect was burned

  • File to Proxy Scenario Query

    Hi All, I hav a file to proxy scenario. The XML file is sent as a proxy from XI to ECC. but ECC is receving it as a blank file. SXMB_MONI in XI is success but in ECC it has failed. Please help us understand where the problem is occuring. Regards, Sud

  • IPad Calendar issues on business

    Secnario: Manager has business iPad and she keeps getting the Corporate Calandar Inbox showing up with numeric digit of appointments and meeting on Inbox, however she don't want it to show the number on the Inbox because her assistant is a delegate t

  • I am making a game and need help badly

    I am makeing a sprite game and I want to make a ticker for a special move. I don't quite know how to go about making this ticker let alone subtract from the ticker once I make it. any help. help would be greatly appreciated. thanks in advance.