A suggestion to start up....

Hi everybody,
I'm rather confused on how to start up using JDeveloper..???? I have the following doubts:
1) to learn 'Java' at a point 5 , for example in a 10-grade scale...before using JDeveloper????
2) to begin with JDeveloper and which type of application...????
3) both of them , simultaneously...????
Remarks:
I have no an exact project.... just i want to learn some basics and even more later on.....
I have experience in PL/SQL and Oracle Forms/Reports as well among others.....
Thanks, a lot for your interest...
Simon

First you might want to learn some of the basics of the Java language to understand about objects and the Java syntax. Any introduction to Java book will do here.
This is a good free online book:
http://www.mindview.net/Books/TIJ/
You can use JDeveloper to practice your coding at this stage.
Once you get the basics of the language down - try out the Oracle ADF tutorial and book for 4gl developer, these will show you how to build a full blown application very quickly and with a minimal amount of Java coding.
http://www.oracle.com/technology/products/adf/learnadf.html
You can also buy the new JDeveloper for Forms book (sample chapter here
http://www.oracle.com/technology/books/pdfs/jdeveloper-forms-ch6.pdf )

Similar Messages

  • TS1398 I can not turn on wi fi in i phone 4s so please give me some suggestion to start my wifi

    I can not turn on wi fi in i phone 4s so please give me some suggestion to start my wifi

    http://support.apple.com/kb/TS1398

  • Suggestions for starting a CMYK project

    I keep getting results for converting rgb to cmyk and vice versa but I only need some step-by-step instructions for how to start a new document in CMYK and best 'settings' suggestions.
    I am working on a logo for someone that will be using a commercial printing press for their output and this doc will start out at a size of 8.5 x 11 using Photoshop CS2
    Any help appreciated.
    Thanks
    Dave

    Also I am looking for info on setting prior to going to print.
    Just make sure you pick the right CMYK profile (ask!). Standards vary around the globe, and with different printing conditions.
    You also need to watch total ink limit. This is specified in the profile and is typically 300 - 330% (full coverage would be 400%) - but if you make subsequent adjustments it's easy to exceed the limit. Use the info panel (it can be set to read out total ink).
    In any case logos are better off as vector files, not raster (for scalability). Illustrator would be a better tool.

  • Req suggestion to start up Career for SAP consultant

    Hi all,
    Can u suggest me how can I start up my career as SAP Consultant in SD or WMS, I have 7 + years of  Experience in Both the modules as End user now I want to start up my career as consultant... Can u plp guide me how to Start up and what are required for the same?

    Hello Surender,
    It good that you have chosen a path to be an SAP Consultant.
    As a end user for more than 7 years, you will be familiar with business process and with SAP technicalities too.
    So, you can go ahead and give certification exam. If you feel you need a training before giving certification, You can have a formal training in SAP authorized education partner and then apply for certification.
    While going through this, i wish to tell you some things which a person should keep in mind while going for certification.
    Kindly do Remember, SAP Certification is not a Job Guarantee Program. Certification may add a value to it if you possess enough domain knowledge.
    Companies Need Consultants who have good experience and knowledge in Business scenarios.
    So, if you are good with Business process and have a valid SAP certification, then it will be easy for you to crack the interviews and get a break in your consulting career.
    Regarding to your question about which module to choose SD or WMS, It is up to you to choose a module, Learn and Excel in that.There is no standard answer for choosing a module.
    I would suggest you to choose a module in which you know the business process more.
    All the best for your SAP Consulting career.
    Vishnu...

  • Need suggestions to start java card prog. plz help!!

    hi ppl....
    I am new to java card programming, but not to java programming. As a starter, i need to know ..... how to write a basic java card app?? Further, i also want to get the knowledge of testing/running this app on any simulator (if available). Can someone tell me that if i need to run my card application on real "smart card" (NOT on simulator), then what i need to have ... i mean any card processor or interface with PC. Any help will be much appreciated.
    Raheel.

    Download the sun kit and read the manuals

  • Help, my PowerBook G4 doesn't start...any suggestions?

    I'm having trouble starting my Powerbook, and I am wondering if anyone has any suggestions for starting the computer, or consolation if there is no hope.
    Every time when I try to turn the computer on:
    -The LED on the power cord blinks/turns green
    -The computer makes the turn-on chime
    -I get the "You need to restart your computer...." screen (which i've discovered is kernel panic)
    -the front LED doesn't light up, blink, etc
    Occasionally, but not always:
    -I get the one beep when I turn on the computer, signifying no RAM detected
    -The first few times I tried turning it on it didn't finish the chiming beginning sound (but now it does)
    What I've tried:
    -Turning on the computer in safe mode
    -Zapping the PRAM
    -The wait and try again method
    -Looking for the hardware test CD. (It is currently among the missing, my computer is from 2003, and I have access to later versions, would they work?)
    Other facts of note and possible relevance:
    -My computer has been acting strange for the past few months; setting its clock back to 1969 when I turn the computer off, randomly setting the default language to Greek, etc.
    -About a month ago the computer suffered a fall, causing a dent and the battery to be not removable my the usual methods. Otherwise the computer's functioning seemed the same.
    Any words of advise/possible diagnoses are appreciated!
    Thanks!

    eeik:
    The article What’s a kernel panic explains a bit more, the phenomenon you have been experiencing.
    Kernel panics can be either software based or hardware based. Dr. Smoke's FAQ Resolving Kernel Panics has an excellent approach to dealing with your issue. Since you suspect RAM, I would pull the RAM module in the user serviceable slot and see if that makes a difference. If the RAM is not the culprit, and all it may need is reseating, since the jolt of the fall may have dislodged it from being securely seated, then you will need to look elsewhere. Next, boot from the Apple Hardware Test disk that came with your computer and run all tests in a loop by holding down Command + L during the tests. Report back on your findings.
    To test software/directory issues run Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Please post back with what you find during these procedures.
    cornelius

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Firefox does not start in MacOS in 10.6.7. For some reason I cannot create a new profile as recommended (error message Error: Platform version '1.9.2.16' is not compatible with minVersion = 1.9.2.17 maxVersion = 1.9.2.17) further help only for windows

    tried to create new profile using Terminal but error message. cannot open in safe mode, instructions are only for windows All my bookmarks are in firefox

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • FireFox 3.6.15 will not start it is NOT compatable with Avast 6.0.1000 sandbox, it gives the following error when I try to open in sandbox: XULRunner Error: Platform version '1.9.2.15' is not compatible with minVersion =1.9.2.14 maxVersion = 1.9.2.14

    Before FireFox was updated to ver 3.6.15, FF would open in Avast sandbox with no issue. Since the update to FF I can only open FF outside of Avast sandbox. Avast version 6.0.1000
    I turned off all Add-ons and still No Joy!
    Windows 7 Pro 64 bit; I7-950 CPU, fresh reboot does not fix this issue.
    Just populated : Troubleshooting Information

    I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
    XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
    When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
    '''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
    '''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
    I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
    '''''It is definitely a Mozilla FF issue'''''.
    Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
    The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.

  • Can't rename my computer and start new TM backup

    Three techs at Apple have not been able to help me.
    I have been backing up a PowerBook G4 and MacBook to a TC wirelessly, and now the MacBook BU stopped working but the PB continues OK. The sparsebundles are different sizes; PB 115 GB, MB 151 GB. After many gyrations with my MB sparsebundle, all unsuccessful, the tech suggested I start fresh with new computer name for my MB (the old name was firstname lastname's computer). So my new computer name is firstnameMacBook. After preparing to do a backup for more than an hour I get the error message "The backup disk image could not be mounted". Same error message I had when my MB BU stopped working. So a name change had no effect. Should I change the name of the existing old sparesbundle? Should I delete it? How? What?
    What to do?
    Bruce

    Sorry. I should have been clearer. I was just wondering if it was ok to do so.
    I had taken my partners computer. Re-installed Leopard, then when I went to do the time machine backup it just started using the original sparse bundle that was technically my partners. I wasn't sure how to get it to start another and wanted to check first if it was ok the rename a sparse bundle?
    For interest sake. I did rename the original bundle and this forced the Macbook to start a new sparse bundle.
    I wanted to keep the original sparse bundle that was my partners in case we had any trouble with my partners new computer set up and migration.
    Hope that all makes sense now.
    Thanks

  • Why does ical print out starting tuesday?

    Why does ical print out staring the week on tuesday?
    Maybe the week starts one day later for the Yosemite dev team, but certainly not in my neck of the woods.
    The actual print out also looks nothing like the new matt and  'flat' graphic style of Yosemite.
    I suggest you start on monday next week and sort these issues out.
    Sunny

    For many people that is the correct option. If you think it should be different, tell Apple, as they aren't listening here.

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • Why does my 27" iMac running OS 10.6.8 hang on the grey screen at start up?

    My 27" iMac, running OS 10.6.8, has started running slowly when loading Apps and when running Safari. Also, when powered, on It has started stopping on the grey screen before the Apple logo displays. To get past this I must turn the Mac off and then back on. Does anyone know what would be causing this behaviour and what I should try for a fix?

    It could be a sign of an impending harddrive failure. If you don't backup regularly, I would strongly suggest you start. Don't run ANY anti-virus software as it really messes with your system and if you do regular software updates you'll be fine there.
    OnyX for MAC is a good application to clean out those cob webs:
    OnyX for Mac
    http://www.macupdate.com/app/mac/11582/onyx
    http://helpdesk.hsc.unt.edu/wp-content/uploads/2010/02/Mac-OS-X-10.6-run-OnyX.pd f

  • I need suggestions for an online trading application

    Hi,
    I am going to develop an online trading application. I have decided to use JAVA EE 5 and I have read "The Java(tm) EE 5 Tutorial". Because I am a (C++) programmer and new to Java, I need suggestions to start development.
    Here is summary of the system in my mind. There will be
    a database to store user's information and operations,
    a web client for creating and managing user accounts,
    a desktop application and web client for users for online trading and
    an application client for brokers for risk management.
    Here is a sample scenario for flow,
    - User wants to create an account
    - Company creates an account for user
    - user gets the prices and trades via application client (web or desktop)
    - system informs dealers and broker via their client platform
    - broker perform necessary operations.
    Java EE 5 Application model fits the system I am trying to develop but I feel I still need some guidance and there are a few things I couldn't figured out yet. For these reasons I want to develop a prove of concept system and this is the system in my mind.
    - A simple database
    user (user_id, user_login, user_password, user_name)
    stock (stok_id, stok_name)
    operation (op_id, user_id, stok_id, op_type, op_amount, op_value)
    - A price server
    will generate random prices and push new values to registered clients
    - A web client to create new users (for admin)
    - A web client to display operations of users (for user)
    - A desktop application and web client for operation entries (for users)
    displays prices coming from price servers, sends users trade requests
    - A desktop application client for informing admin about trades (for admin)
    when a user buys or sells something, this client notified (user buy/sell something)
    What do you offer for this sample system?
    Which is the best IDE?
    Which Application Server should I use (scalability and speed is critical)?
    Which Java EE APIs should I use?
    JSP or JSF?
    Will I need hibernate?
    And so on.. I need some points to start and go.
    Thanks for any help.
    Ahmet

    It wouldn't be an arbitrary track. However, maybe you could make an arbitrary track by dividing the track into segments. Each segment is either a straight line or an arc. These are easy to model the cars' behavior on, because you'll have a straightforward way to determine the direction the car should be facing, and the range to the left and right where the car can stray and still be on the track.

  • How to rebuild Windows 7 start menu?

    Having had a virus and removed it successfully I am left with an odd problem.
    The virus, amongst other things, seems to have altered the start menu removing the "pinned" programs which is not a problem but also removing the contents from the folders in "all programs" for instance under "Microsoft Office" there is a sub folder called "office tools" (empty) but nothing else.
    The programs are all still there and work they just aren't available in the start menu. There must be a way of rebuilding this menu without having to reinstall every one of the very many pieces of software on the machine.
    Suggestions welcome.

    Start Menu common to all users is C:\users\all users\microsoft\windows\start menu.
    For each user C:\users\username\appdata\roaming\Microsoft\window s\start menu.
    By default these are hidden folders.
    Open using Windows Explorer and create shortcuts, copy, paste etc.
    A search pulled up this [http://softzilla.blogspot.com/2011/04/free-windows-7-context-menu-editor.html] No idea if it is of any use
    Message was edited by: peterk_1

Maybe you are looking for