A t.code to create Messages for Validations (OB28)

Hi All,
could anyone tell me ow to create Messages for Validations (OB28) ?
Is there a t.code to manage the messages ?
Thanks

Hi,
The transaction is SE91.
Regards,
Eli

Similar Messages

How to create messages for Validation in transaction type OB28

Hello All!
I am creating a validation in transaction type ob28. I have created the first point "prerequisite", second point "Check" and in the third point "Message" I want to put the message number 016 but the next error appears "Entry E ZFI 160 does not exist in T100". How can I create this messages number?
Thank you in advance!

Hi Leyre,
This message applies to a problem with change requests. When creating a message, it's a workbench request that system has to create. Apparently, when you try to create a message, it tries to catch 'tramp' on existing CR which is assigned to a different client in your system. You should try assigning a new CR for this change; you could ask your BASIS team to help you on this.
Regards,
Eli

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Function module to create messages for Purchase order

Hi All,
I am writing a BDC and recording steps to create Messages for a Purchase order(ME22N).
For an existing PO, go to Messages and create a message with output type for EDI. Already there are existing Output types for Print and Fax,
How do I default my cursor at the 3rd record if Print, and Fax are already there, and when I run this BDC for several PO's How do I know how many messages are there and where to place cursor to create message for EDI.
Is there any Function module or Bapi available wherein I can directly give the PO number and create the message.
Please suggest
Thanks-

I have a list of PO's in the internal table, I need to put a loop and for each PO, I need to create a message with output type for EDI. as I am not sure if there are already messages available for Print, Fax, and Email. I have an issue placing the cursor on the Messages window.
So i thought if there is any function module to create message without going to message window, I can avoid those complications.
How to do this. any suggestions?
Thanks-

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

Custom Error Message for Validation.....

Here is my Validation:
I want the error which is grown from what is wrong on the page to display after the validation.
the GUI for validation will not let me leave the Validation ERROR box empty...just not sure how to get around this.
DECLARE
isValid BOOLEAN := TRUE;
message VARCHAR2(4000):='';
BEGIN
if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
then
message := 'Metric Name is Not Chosen:';
isValid := FALSE;
end if;
if   (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
then
message := message || ' Sub Metric Name is Not Chosen:';
isValid := FALSE;
end if;
if NOT REGEXP_LIKE(:P14_METRIC_VALUE,'expression')
then
message := message || ' Value is not Numeric:';
isValid := FALSE;
end if;
if NOT isValid
then
   raise_application_error (-20001,message);
end if;
END;Edited by: bostonmacosx on Feb 27, 2013 12:05 PM

SO what I did was make sure that the process doesn't go false:
and at the end just checked my messages and added an error on the end. WHEW hope this helps someone in the future.
DECLARE
isValid BOOLEAN := TRUE;
message VARCHAR2(4000):=NULL;
BEGIN
if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
then
message := 'Metric Name is Not Chosen<BR>';
end if;
if   (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
then
message := message || ' Sub Metric Name is Not Chosen<BR>';
end if;
if (NOT REGEXP_LIKE(:P14_METRIC_VALUE,'^(\d{1,99})\.(\d{0,99})$') or :P14_METRIC_VALUE IS NULL)
then
message := message || ' Value is not Numeric<BR>';
end if;
if message IS NOT NULL
then
apex_error.add_error (
        p_message          => message,
        p_display_location => apex_error.c_inline_in_notification );
end if;
END;Edited by: bostonmacosx on Feb 27, 2013 12:52 PM

WDA: No message for validation check on dynamic context / UI

Hello,
The WD framework is checking user input to the UI elements automatically.
If I use an input field ( bound to a structure containing a Data Element of type DEC 3   for example) and enter a non-numerical value I will see this message:
"The Entered Value Can Only Contain Numerical Characters"
in the message area.
If I do the same with dynamic code ( Context and UI elements are created dynamically) this message does not appear.
The application behaves like the "manual built" one ( I can't navigate away until the "wrong" value is corrected ), but the inputfield with the "wrong content" is not highlighted and the message is not displayed in the message area.
I'm using the following methods to create the dynamic UI:
CALL METHOD cl_wd_dynamic_tool=>create_nodeinfo_from_struct
    EXPORTING
      parent_info    = lr_root_node_info
      structure_name = lv_linetype_name
      is_multiple    = abap_false
      node_name      = dyn_field_context_name
    RECEIVING
      new_node       = lr_node_info.
CALL METHOD cl_wd_input_field=>new_input_field
        EXPORTING
          id             = lv_input_id
          bind_read_only = lv_bind_read_only
          bind_value     = lv_bind_name
          length         = lv_length
          VIEW           = lr_view
        RECEIVING
          control        = lr_input_field.
Is there anything else that I need to do to make the message appear?
We are running on NW2004s/SP9
Best Regards
Waldemar
There is a problem in the method
CL_WDR_MESSAGE_MANAGER->GET_MESSAGES_FOR_WINDOW().
In my case we had two views with the same name (one in a start-component, one in the target-component). After renaming the 2nd. view everything works fine.
Note 964613 describes a similar problem, but didn't solve ist entirely.
Message was edited by: Waldemar Knorr

It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
td[headers="HIREDATE"] input

ABAP code for validation OB28

I want to make a validation for callup point 3 'Complete Document'
I would like a validation in bool_data-bseg that only 1 transaction type (bewar) or no transaction type is used in any of the line items. If 0 or only 1 transaction type has been used there is no error. If more than 1 transaction type is used in the line items then an error message should appear that only 1 transaction type should be used.
ABAP Code would be roughly:
LOOP AT bool_data-bseg INTO bseg WHERE bewar <> ''.
ENDLOOP
if bewar_count >1
b_result=false.
else .
b_result=true.
end if.
Please give some hints for the code at '...'.

Moderator message - Essentially duplicate post locked
Rob

Create request for Validation

Dear All,
I have made some changes in existing validation through GGB0 and save that but system has not created any request.Please give the option to create a option for creation of request for changes in validation or where should I get the request if created.
Regards,
Sandeep

Hi Sandeep,
Go to tcode GCT9, and enter your validation name and select all the check boxes and execute it.
There assign a TR number incase if you have the TR created earlier. Otherqise create a new TR by clicking Create Request button.
This will solve your issue.
Thanks,
Srinu

How to manual create message for ERS invoice

Hi expert,
After ERS batch job run, the invoice already created, but the message hasn't been created.
So now I want to manually create it, how can I do?
Thanks,
Grace

Explore SPRO @ MM @ Logistic Invoice Verification @ Message Determination @ Maintain Message Type
Also check :
Evaluated Receipt Settlement (ERS)
http://help.sap.com/saphelp_srm30/helpdata/en/fb/8dec38574c2661e10000000a114084/content.htm
Purchasing Document Output
http://help.sap.com/saphelp_srm30/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/content.htm
Edited by: m_n_novice on Sep 7, 2009 4:34 PM

Generating code in OWB mapping for valid operating modes

Hi all,
When i generate the map in OWB it will generate a code in default operating mode. But it's written in OWB documents that During code generation, Warehouse Builder generates code for the specified default operating mode as well as the unselected modes.
Can i find the generating code for the unselected modes? If possible then how can i find? Plzz help.
Regards,
Sumanta

Hi Sumanta.
If my understanding is right than you are looking for a error handling feature in OWB. Well in such case you need to look at the concept of Shadow Tables in OWB. TO know more about the fucnctionality of shadow tables please follow this link.
Using Data Rules
It has most of the information. If you still hav any clarifications, you can post it here.
I dont know much about operating modes.
Hope this is what you were looking for!

How to create messages in PC

Dear experts,
How to create in msg in Process chains. Is it okay to create msgs anywhere in the PC. Can i have the complete steps please. Thanks
dave

Hi Dave,
You can create messages for any process in a Process Chain.
1) Go to RSPC
2) Select any process chain where you want to create a message.
3) Right click on any process and choose 'Create Messages'.
4) Here you have to choose any one option: Success, Fail or Always.
5) Provide process variant name and click create button and provide description in next screen.
6)Click on Maintain Recepiant list button and provide recepiant email address and select appropriate recepiant type. ( Eg: internet address ).
7) Save the settings and go back to your previous screen and clik edit documents button to customize the message.( this is optional)
Hope this helps.
Praveen

What is FCHU Create reference for check from payment document?

Hi,
I need some help on this T-code FCHU Create reference for check from payment document.
1) I've post check payment. Do I need to do anything on FCHU, before I review the check register FCHN?
2) When we should use this t-code FCHU?
3) What is the purpose of this T-code FCHU?
Please clarify my doubts. Please provide me step by step on this if possible. Thanks

Hi,
all check entries are ... report from table of list ... Issued Checks FCHU - Create reference for check.
FCHU Create Reference for Check .(RFCHKU00) to transfer the check number into the invoice document.
to transfer check# to field Assignment, Reference or Reference 3.
Exp:Step 1 - Go to ta F110 and get House Bank
Account ID
Step 2 - Run programm FCHU
Regards
Sridhar

Create message in Process Chain

I know we can create messages for each Process Type in a process chain. But is it possible to create one message somewhere to tell us when any of process type failed? Thanks!

Hi,
You can create a meta chain and call your actual PC. Then, in the meta chain, you put a message to the PC you are calling in case of error. You'll get a message whenever any process from your PC fails.
Hope this helps.
Regards,
Diego

Create users for teradata in ADAM / Acitve Directory

Hi
I was wondering if you could help me with the ability to create a user in AD / Adam? I am trying to write the powershell code to create users for Teradata connectivity. the manual process is to use adsiedit and create the users through groupof names class.
This is what I have that is NOT working and was looking where to go from here.
$dom=[ADSI]"LDAP://OU=Users,OU=dev,OU=tdev,dc=acme,dc=com"
$obj = $dom.Create('GroupOfNames', 'CN=ASmith')
$obj.SetInfo()
any help would be greatly appreciated.
Thank you
John R Remillard

Hello,
You should ask in the
Windows PowerShell forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

A t.code to create Messages for Validations (OB28)

Similar Messages

Maybe you are looking for