A very simple voicemail question - please help!

Hi
My iphone 3G cuts into voicemail after only 3 rings, which isn't enough time to get it out of my pocket let alone answer!!
How do I lengthen the amount of rings before it goes to voicemail. I've tried everything (seemingly) and there doesn't seem to be any voicemail settings anywhere on the phone.
Many thanks

This is controlled by your carrier, not the phone. Most carriers have a max of about 30 seconds they can set before going to voicemail. Call your carrier and ask them to extend the time to voicemail.

Similar Messages

VERY URGENT IPHOTO QUESTION PLEASE HELP!!!

Good day. i know this is an ihpoto question which should be posted in the iphoto section- but due to its urgency i really need all the help i need.- I would like to create a slide show presentation with music attached to it. i tried it once with a few pistures and it worked. now, i have around 3 hundred pictures and would like to create a slide show but unfortunately the same music keeps on playing over and over again. once the 1st music is done and there are still pictures to be shown, can i use another music title? how do i do this? please help....

I always create a playlist in iTunes when I'm making an iPhoto slide show. You can select the playlist to play. I generally try to figure out how long I really want the slide show to last, and then make the playlist in iTunes. You haven't told us which version of iPhoto you're using, but the more recent versions have an option to time the slideshow to the length of the music rather than playing the music over again. Exactly which versions of iTunes and iPhoto do you have?
-Doug

A very odd VLAN question -please help

Hi,
We have two subnets 10.1.1.0 and 10.1.2.0 and these subnets are phisically separated. we also have two VLANS, VLAN 2 and 3, please think of the VLAN 2 as the default VLAN 1. strenge, it has been like this when I took over. there is no trunking between these two VLANS. 10.1.1.0 is the main network and all the servers and users arfe on it and 10.1.2.0 is a Dev environment and some development severs are on it.
I have given an IP address from the maon subnet i.e. 10.1.1.0 to a switch which is used for Dev environment on its SC0 and have assigned it to VLAN 2 but the rest of the 10.1.2.0, i.e. the Dev environment is on VLAN 3. from the main network I cannot ping that IP address (naturally) and I don't know how to build on what we currently have without making major changes and build over time as transparant as possible.
I am sorry for this very long expalanation.
I guess I need to know if I can make trunking between these two VLANs, i.e. VLAN 2 (main 10.1.1.0) and VLAN 3 (Dev environment 10.1.2.0) with out needing a router? of if I need a router, how? so that I can build upon it over time.
well, I have given an IP address from main subnet from VLAN 2 to a swotch which is for VLAN 3 or Dev environment!!! I really didn't know how to do this in order to make it as trasnparant possible to others since I am not in charge of the AD and the servers.
Please forgive me for my somehow vague explanation and I hope I could have made a question.
Thanks,
Masood

Hi and thanks for responding. Almost all my switches are L2/L3 Cisco CAT switches with two 3560 at the edge with knowledge of public network located between my two border routers and my Firewalls. My main switch is a Cisco CAT 4510 R with is a layer 2 and 3 switch with Cisco IOS and a few 3550s and 3512s around. I also have two CAT 4006s with CAT OS but these aren't my current concern as I know that I need to either use one of these swithes or a router to route between my VLANs. I do have a Cisco Router, a 2621 as my main router with its fa 0/1 is used for my two mian subnets (servers, devices, and users are on these two subnets 10.1.1.0 and 10.1.4.0) and the DHCP server is givng out IPs out of these two private subnets. the other interface on this router fa0/0 is used for 10.1.2.0 which is totally isolated subnets with a bounch of servers on it called Dev Environment. The AD guys want it this way.
Ok, now, when I take over this network I realized that those people who were looking after this network had created two VLANs, VLAN 2 (acting as the default VLAN 1 actually and used for managemnt of devices too) and VLAN 3 (VLAN 3 is for 10.1.2.0, i.e. the DEv Evironment, so bacically all of my devices, servers and users are on VLAN 2!!! and no trunking.....
I have provided a Diag of my network topology.
what I need to do is to find the best way to create a few more VLANs on my main network (10.1.1.0 and 10.1.4.0) and put all the servers on one VLAN; say VLAN 2 and few other segments and ten start to route between them by trunking. My problem is that the AD guys do not want to get involve and do not want (one of them my boss) to do IP renumbering so i need to do this at the L2 (by MAC addrss may be) and then use the router or (I can upgrade my main router to provide more interfaces with more mem and processing power) and use t to route between VLANs. this router is also used to connect us to a remote office where we have our Web Servers hosted via a T1 point-to-point as we are an online business so I need to be very carefull with this mission and have all the server and web Servers at this locations and my remote locations (10.5.1.0) on a same VLAN and then user on different VLANs by segmenting departments.
Now, you see my delema and the challange that I am facing. how this can be done slowly and gradually. first adding one more VLAN put all the servers on it (also, back interfaces and clustering of servers in mind) and users on another, then, start trunking and see how it works. if all goes well then I can start creating more VLANs and that would be the easy part and point them to the trunk Interface / Link.
Your thoughts will be greataly apreciated.
Thx,
Masood

One very simple quick question please

I am needing to admin one computer from remote sites. As the admin computer will have different IP addresses each time I work, I don't imagine this will be a problem. However, which IP address should I use for the one client. The client machine is connecting through Qwest DSL, and has an external IP and a local IP. When I use the admin computer at the same location as the client, the external IP match and the local IP are different. How do I get to the correct machine when I am imagining that all of the Qwest DSL connected computers on the same node will have the same external IP. Can I "stack" IP's? - e.g. 123.111.11.182, 222.222.222.255 ?
Thanks in advance for all of your help.
Al

Normally you use the externally-facing IP address Qwest will assign to the modem, or the IP address the router picks up if a router is in use. If a router is in use, you may also have to open the appropriate ports for ARD and forward them to the client's internal IP address.

2 very easy AWT questions, please help

Hello, hopefully one of you AWT Pros can help me out, im pretty new to AWT (i cannot use swing since my awt doesnt support it)
(1) I have a center panel that display a pic "map.gif". It is currently on the upper left hand corner, how can i properly Center this pic?
(2)I have a bottom panel that is a label to display a status bar. How do I change the background color from white/black text --> black/white text?
I tried using something like:
Label statusBar = new Label();
statusBar.setBackground(color.black); //and I also tried .....(black)
statusBar.setForground(color.white); //and I also tried ....(white)but i just get errors that say: <identifier> expected, and "cannot resolve symbol"
any help would be great, thanks!!

(1) You have to center the Image manually, for example:
public class ImagePanel extends Panel
{ Image image=null;
int imgWidth=0,imgHeight=0;
public ImagePanel(Image img)
{ super();
image=img;
imgWidth=image.getWidth(this);
imgHeight=image.getHeight(this);
public void paint(Graphics g)
{ Dimension d=getSize();
int x=(int)(d.width-imgWidth)/2;
int y=(int)(d.height-imgHeight)/2;
g.drawImage(image,x,y,this);
(2) Label lb=new Label("Blah");
lb.setForeground(Color.black);
lb.setBackground(Color.white);

HT2968 I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

How to implement drop down list in WDP Abap....very urgent...please help me

Hi Gurus,
I wanted to implement the drop down list button in the WDP Abap interactive form. Once the users clicks on the drop down button, an RFC should be called and display the details under the drop down button. Please give me the logic with code. Its very urgent...please help me. Please note that it is in WDP Abap interactive forms. We are using NW2004S, ECC6.0.

Hello,
you have to use ZCI form to use DDLB in WD-ABA. The content of the DDLB has to be present at rendering time, there is no dinamic call when you click the "dropdown".
The attribut you map to the DDLB has to be an element with a value-set, and the value set has to contain the text / value pairs.
>> this will be displayed when you click the dropdown.
Best regards,
Dezso

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps

I want to change my apple id password but I forgot the security questions please help me some using my icloud I'd

I want to change my apple id password but I forgot the security questions please help me some using my icloud I'd and if confirmation is must so please phone number is mine please send a code please help me my apple

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.

Since up dating my Firefox I can not play any games on Facebook they all run very slow, can someone please help me with a solution.It mainly seems to be with games.

RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan

My apple id have been blocked an i do not remember the identity or security question please help what can i do?

my apple id have been blocked an i do not remember the identity or security question please help what can i do?

If your account is disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iPhone and iPad by tapping on your id in Settings > iTunes & App Storeand then log back in so as to 'refresh' the account on it.
For your security questions, if you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 (you can also try this link if you can't get your account enabled via the above)
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Hi, I have traveled the country and have forgotten my security questions please help me thank you

Hi, I have traveled the country and have forgotten my security questions please help me thank you

Call Apple to help reset your Security Question.
http://support.apple.com/kb/HT5699

HT201303 I forgotten my answer of security questions, please help me. Thank you !

I forgotten my answer of security questions, please help me. Thank you !

You need to ask Apple to reset your security questions; as described in this article, it can be done in Vietnam by phoning 1-201-0288 and then 800-708-5413.
(107433)

HT201363 Hello, I have my pass word, I have my Apple ID, but itunes think I am buying a song for the first time and is asking me 2 security questions, please help, what should i do?

I cannot remember the answeres to my security questions, please help.

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105959)

A very simple voicemail question - please help!

Similar Messages

Maybe you are looking for