A04 POST option missing in dropdown in  ARE1 and ARE3 transaction

Hi! All,
          While using transaction J1IA101 and J1IA301 , I am not able to see the A04 POST option in the drop down. It seems to be missing. Please help.
Regards,
Ashutosh Kumar Sinha

Hi
In order to have the option of A04 POST in J1ia101 or in J1ia301 you have to add the t codes in below path
IMG-Logistics - GeneralTax on goods movement India-Business Transactions-Incoming Excise Invoices-Define Processing Modes Per Transaction
On the change view screen of Define Processing Modes Per Transaction
You have to add
J1IA101 and select the Processing Mode as A04 and check the box ACTIVE
the same has to be repeated for J1IA301
regards
Prashanth

Similar Messages

  • Very urgent excise base value isnt captured to are1 and are3

    dear sir,
    in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

    hi,
    for the hiegher education cess not appearing i req u to chek ur pricing procedure if its there in the pricing proceudre and also to check the budget-07 settings also chek if u have checked mark AT1 in excise reg settings. follow--img-log gen-tax on goods mvmnt -india-baisc settings--maintain reg.
    for teh secong search on service .sap.com. if you do not find nething tht meets ur need. write to SAP it may be cos of a program error.
    saurabh

  • Data nt capturing in are1 and are3 document

    dear sir,
    in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

    hi,
    first echek if the duties are there in your comm invoice. if yes and they are still not appearing in your excise invoices check if the following tables are suitably updated- J_1IEXCHDR and J_1IEXCDTL
    saurabh

  • Finder issue: Compress option missing from right-click menu and greyed out in File menu

    How can this be, and - more importantly - what can I do to resolve this issue? Thanks.

    You mean this ThisService?  Never heard of it before.
    Why don't you create services using Automator (in /Applications)?  That's one of the things it is designed to do.  It has no problem with making sure they are properly created and installed in ~/Library/Services so that the finder can see them there under the conditions desgnated when you create them.  You don't even have to log out and back in.
    Note, if you like using applescript you can use applescript in automator too.

  • Plant selection missing from dropdown during PR and PO Creation

    Hi Everyone,
    Good day!
    I am currently experiencing problems during PR and PO creation. Everytime I try to access the list of selection for the plant field, the system does not display any entries. (In our sandbox client)
    In our dev box, I was able to perform the 2 fucntions succesfully. Can you guys please help me check what would be the issue for this? What would be the procedure that I should follow to investigate this concern?
    Best regards,
    DeLo

    Hi,
    It is up to the consultant who is configuring the system to decide how it ahould be done... one dev 1 TR or many dev 1 TR.
    Say now you have created 2 TR's for plant creation and plant assignment.
    The TR's should move in to other client has it is created.
    now for example ur plant assignment TR is moved first and then the plant creation. the other client in which it was moved will contain only plant creation that is it has our assignment TR is overwritten by the 1 TR which is plant creation.
    Usually consultants do it this way.
    1 TR - Org Strusture
    1 TR - Purchasing
    1 TR - Inventory
    1 TR - Invoice
    1 TR - Valuation and AAD
    and so on..
    Thanks & Regards,
    Kiran

  • Poster option grayed out

    ever since we upgraded to osx 10.9.2 this week, i can not print my patterns using the poster option. it is simply grayed out and wont let you choose it. i have never had this issue till the update, and at first i thought it might be driver compatibility, but i updated all of that and talked to hp and they said everything was ok on their end. now im exploring adobe since that is what i have always used to open them. please help!

    Chris,
    As you have seen and Jbowden points out, one must first click on the Chapter Point - it turns red. THEN, the Poster Frame can be set to one's choice of locations, usually where they have placed the CRT.
    As some Video will get both the Chapter Point AND the Poster Frame set upon Import_as_Timeline, there are instances where both are created, and one just has to drag the Poster Frame Marker to the desired location.
    I often forget to do that initial click, myself, and am reminded, by a greyed-out "Set Poster Frame." It happens to all of us.
    Good luck,
    Hunt

  • Post option in ARE1 t code J1IA02

    Hi Gurus,
                            Post option is not coming in drill down at the time of t code J1IA02. Any reasons why it is not coming. Create/change/cancel/display is coming????

    Go to SU01/SU3 ( to ur ID) select parameters tab and then scrol down and press F4 select SD_VARIANT_MAINTAIN and in the next field select A or X then try it will allow u to save ur own variant.(the save icon come to screen variant selection screen)
    More on this:
    By default, SAP user can't save report layout in some SAP SD t-code such as: VA05 and SDO1. The 'save' menu will be grey. But, you actually can save the layout by adding a parameter in your SAP user profile. You do that with t-code: SU3. Go to 'parameters' tab and add new parameter id, which is: SD_VARIANT_MAINTAIN'. The parameter value for that is 'A'. Then save your user profile and try again to save layout in VA05 or SDO1 t-code.
    Regards,
    Sanjeev

  • Printer Settings - black and white option missing

    I was printing fine, then all of a sudden, the option to choose black and white is missing.  It only prints in color.  I just bought a Officejet 4620.  How did it revert to this setting?  How do I reset so that I can choose "Properties" and see the option to print color or black and white?  It disappeared?

    That's really strange to say the least!
    At this point I'd recommend uninstalling the printer software. You can find a guide on how to completely uninstall the software here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&cc=us&dlc=en&lc=en&product=5191646&tmp...
    Once that has been done I'd recommend downloading the driver package here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5191646&
    If it is still not working beyond these steps please post back asap!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • T500 fingerprint reader - Windows 8.1 fingerprint option missing "enable biometic framework"

    Hy,
    It's my first post here. I got a LENOVO t500 at work to use and I wanted to try to use finger print auth to log in. Its in a domain, but I got local administrator privileges on it. The machine runs 64bit Windows 8.1 Pro.
    The fingerprint reader driver was missing in the first place (windows identified it as a fingerprint sensor but had no driver).
    The sensor is an AuthenTec Inc, AES2810. I've tried to install the lenovo driver:
    http://support.lenovo.com/en/downloads/ds034486
    But received the error message in the subject about I need to enable the biometric framework.
    I've also seen
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Windows-8-1-fingerprint-reader/m-p/124...
    and downloaded-installed an authentec driver successfully, so now device manager shows it and identifies it as it should..
    Well I've went to the group policies as it was suggeseted everywhere on the net and turned on the options.
    I've also checked and found a windows services that had biometrics in it : I've set it to auto-start and started it right away.
    But even after all of this the fingerprint option is missing in the accounts sign in page in pc settings.
    I've restarted the machine multiple times (with the real restart )
    Could you please give me a hint?
    I've spent a whole day looking for this yesterday..
    Have a nice day & Regards,
    Steve

    Yes, but only after you enroll your fingerprints in the Fingerprint Manager, then Windows will tell you that Biometric logon is not enabled, and then you're given the option of enabling it.
    However, for domain machines, this can be enabled thusly:
    Goto: Control Panel\All Control Panel Items\Biometric Devices
    Click: Change Biometric Settings
    Click both:
    Allow users to log on to Windows using their fingerprints
    and
    Allow users to log on to a domain using their fingerprints
    Restart the computer.
    Click: 'Switch user' at the log on screen and choose the fingerprint icon (this of course requires you to first have added a set of fingerprints to your account)
    See if this doesn't do the trick.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Using a static option with select dropdown

    I have a <select> dropdown menu in a Spry (master)
    region which controls the content in a Spry detail region. Both
    regions are based on the same dataset. When I select an option from
    the dropdown, additional details about the record are displayed in
    the detail region. So far, so good.
    I want to have the first option in the <select> be a
    static one like "Please select . . ." It's easy enough to add that
    option, but when the dataset is loaded, Spry displays the details
    for the first record of the dataset in the detail region -- even
    though only the static option is selected in the master region. (I
    guess that when the dataset is loaded, Spry sets
    ds_CurrentRowNumber to 0 which is the reference for the first
    record.) What I want to have happen is that when "Please select . .
    ." is displayed in the <select>, I want the fields for the
    detail region to be blank (instead of loading information from the
    first record). How can I accomplish this?

    This is a Spry-driven widget I wrote. Unfortunately it's not
    documented:
    http://www.massimocorner.com/libraries/spry/spry_select/sample.htm
    Maybe it's worth a try
    Massimo Foti, web-programmer for hire
    Tools for ColdFusion and Dreamweaver developers:
    http://www.massimocorner.com

  • Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud

    Hi all, i am missing the output to web and pdf in Bridge , any option to get it in the bridge from adobe creative cloud
    @bridge

    Have a look at Install Adobe Output Module

  • Park Post option in F-48 & F-53

    Hi
    My client has requirement in Payments (F-53) & Downpayments (F-48) that entry must be entered by someone else & it must be posted by someone else after verification.
    There is park & post option in FB60, FB70, etc. But there is not such parking & posting option in Payments (F-53) & Downpayments (F-48).
    Now, Cleint has one requirement regarding payment & down payments. They want parking & posting option in F-53 & F-48.
    SAP doesnot provide for parking & posting option for F-48 & F-53.
    This control is generally required by many people. So tell me how to fulfill cleint requirement.

    Hi Deepak
    In my company this is done through Workflow. Once a user post a document via F-48 or F-53 in will sits in the appropriete approver's sap inbox. Then approver will check the document and post it.
    For example;
    If the amount is less then 50000 it will routed to MR. A 
    If the amount is form  50000 to 100000  it will routed to MR. B and so on.
    Or, you also can ask your abaper to create a new user exit (customized screen) for you? 
    Thanks
    Krish

  • Acrobat 9 Std - Comments- 'Enable for Commenting And Analysis In Reader' option Missing

    Hi,
    We've purchased a copy of Adobe Acrobat 9 Standard, and need to enable comments in Reader for PDFs that we create in Acrobat.  The option to "Enable For Commenting And Analysis In Reader" seems to be missing from the "comments" menu, even though all the videos/tutorials insist it's there.
    I haven't found any threads about this yet, and searched google for the missing option + "missing" along with other things.  Nothing related came up.
    Any ideas on what we could try?  Or why this is happening?
    Thanks!

    I don't think Standard has this option. Acrobat Pro does.
    This page confirms it: http://www.adobe.com/products/acrobat/matrix.html

  • Combine Files into a Single PDF option missing from start up in Acrobat Reader XI

    The 'Combine Files into a Single PDF' option missing from start up in Acrobat Reader XI and is also not available on the right-click button.

    There's no such thing as "Acrobat Reader XI". There's the free Reader, which doesn't have this option, and there's the paid product Acrobat, which does...

  • Why is the "Empty Trash" option missing? All I have is "Secure Empty Trash" which takes a considerable amount of time.

    Why is the “Empty Trash” option missing? All I have is “Secure Empty Trash” which takes a considerable amount of time.

    check your finder preferences.

Maybe you are looking for