A8N-SLI and TV@nywhere Problem: SEMI-Resolved

 
Ok...I replaced my K7N2G-ILSR with a A8N-SLI with twin MSI 6600GT's (see sig), and I get nothing but static when trying to use my old TV@nywhere (not a Master). I used the updated drivers, patch, and software from the site.
Does anyone have a clue? It used to work like a charm.
UPDATE:
Ok, it turned out to be a bad splitter, and now it works. HOWEVER, it's noisy when I surf the web, with static and interference distortion in the picture. I thought it might be the wireless card, so I pulled it, and kept it connected via ethernet, but that didn't fix it.
Anyone? Bueller?

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

Similar Messages

  • K8N SLI and WinAmp5.05 Problem

    The thing is when i listen to my Mp3s using WMP everything sounds fine crystal clear sound is coming from board's integrated SB Live!
    24 bit.
    However, whenever  i listen the same music from WinAmp, a crackling sound and hiss appears after a while...
    ...what is the problem?
    Markoul

    Due to interference through the groundlayer, I can hear whenever my harddrive is accessed, as HDD Active signal is +5V pulled down to ground. I can however not find exactly where the ground error lies (it might be the board, it might be the case, it might even be the PSU). So for the moment I am using an Audigy 2 that a friend sold to me for about $10 (the swedish equivalent). I have this problem only with the onboard audio. Otherwise the sound is as crisp and crystal clear as you could possibly want with analog speakers.
    Have you disabled the Equalizer in Winamp (I never use that one)?
    How many amps can your PSU handle on the -5V rail (required to have -5V)? The reason why I ask is that amplifying is created with a difference between +5V and -5V (or any voltage that you have a positive or negative of). The difference between the positive and the negative voltage produce the maximum possible amplification. However, if any of these voltages drop due to overload, the normal amplification range (and it's wave curve if you check frequencies with an oscilloscope) start to look rather strange, which might result in audiable interference inte produced signal (such as clicks, pops and crackling sounds).

  • Help needed with X-fi ex.music problems with nforce4/ asus a8n-sli del

    My x-fi extreme music doesnt work with my mb (asus a8n-sli deluxe) it gets slower and slower and finally it didnt boot win xp home.
    After disconnecting the card my system worked perfectly, strangely in the beginning i had no problems (app 2 days) and now it doesn't work
    Has anybody a solution ?

    Actually someone did post a work around they got from Logitech support. If you go here http://forums.creative.com/creativel...cending&page=5 explains temporarly changing a key in the registry. Ppl report it works so maybe give it a shot?
    mikelebron wrote:
    That problem has not been resolved yet. You will have to li've without asus update and use the dos version.. That means you will have to boot from a floppy or CD rom and get to DOS screen to do Bios updates. You can thank the creative drivers for breaking your Asus Update

  • Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

           Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system?  I think it's probably something in the Windows
    8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard.  After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine.  My real question is, why should I have to settle
    for 32bit on a 64bit system?

    I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
    I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
    upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
    from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
    System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
    others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
    failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
    disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
    have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
    partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
    (Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
    (4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
    2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
    enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

  • Asus A8N-SLI Premium and X-FI Platinum no so

    So i know this is a known problem but I haven't found a solution yet and don't want to read through the 00 page post on this topic where everyone gets off topic. I have a Asus A8N-SLI Premium with a X-FI Platinum. I have installed the latest BIOS with Asus' update thing. I cannot get the driver off the internet to work because it crashes when it is decompressing. The X-FI card is installed in the second PCI slot, which I read is the slot that works? I have everything installed (driver that came in box) and I get no warning in device manager, but I still get no sound. Can anyone tell me what to do?Asus wouldn't help me. and I guess I can't call Creative because I have had this card for more than 60 days. It was on my old machine and it worked.

    This is what I put on the ASUS site. <span class="content">Hello to all,
    So I bought this motherboard because my other one (LanParty) would run my memory in dual channel. I spent alot of time trying to get it to but it just wouldn't. So I caved in and bought an ASUS motherboard because of there good reputation of making quality products.
    I have a Creative X-Fi Platinum sound card. It work flawlessly with my LanParty mobo but I have not been able to make it work with this ASUS mobo. I have read alot about it and I know that ASUS and Creative know it is a problem. I however have not been able to find a solution. I know there is a way because going through these forums people have said "well it works with mine" but they never give any specs on what is on, what PCI slot, etc etc. I have tried everything you can possibley imagine. I have tried a full reload of the whole system (about 6 times). I have tried different PCI slots. On board sound is disabled. I tried to do some ACPI setting for the computers device driver but it crashes my system.
    Here is what I have now.
    Bios version 302.
    Sound Card is in PCI slot 2 (2 slots down from where video card goes)
    Was there a BIOS fix for this problem? What BIOS was it's
    What is the best slot for the card? (I don't have IRQ conflicts)
    Can anyone help me? I have nice 5. surround and want good sound to be coming out.
    If you have this board and this card can you give me some info on what is configured?
    Thanks
    Leon

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • Why is Pages 5.2 telling me it can't save my document until problem is resolved -- how do I find out what the problem is and how do I resolve it?

    I'm working on an iMac OS 10.9.3. I downloaded Pages 5.2 and am using it to edit a long document with multiple images. Formatting disappears (style headings, for example), then when I try to move an image, the program tells me it can't autosave until problem is resolved. I don't know what the problem is or have any inking of how to resolve it. I can't move the document to another destination, or duplicate it. I've had multiple program crashes and am not getting anywhere.  Sure could use some help in salvaging this important document.

    That is not the full message, and what does it say exactly?
    What exactly are you intending to do with this file?
    If you are going to take it to a commercial (digital or offset?) printer, how do you propose doing that? In what format? What output are you aiming at? Have you actually spoken to a printer about what you are putting together?
    If alarm bells are not ringing for you yet, I am not sure what it is going to take to alert you to the mine fields you have just entered.
    Peter

  • Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.

    Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.

    You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
    Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671

  • I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    I am using itunes 10 and trying to consolidate my files.  I keep getting the error "Copying files failed.  The file name was invalid or too long".  How can I indentify what file is causing this problem or resolve this issue?

    BUMP
    Yes, I just get that message. I don't see how I could investigate this problem.
    I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
    In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
    Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
    Can anybody help me?

  • In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

    in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

    Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

  • Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

    Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

    You can't buy the part from Creative as a spare.
    I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
    The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this.

  • Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

    Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

    Hello:>
    I created a function "APEX_030200.wwv_flow_epg_include_mod_local" as a sys user, then I dropped it.>
    You can't have 'created' this function ! The function is installed by the APEX installer. This function needs to exist in the database for APEX to function correctly. Install the function described below into your database
    CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local(
        procedure_name in varchar2)
    return boolean
    is
    begin
        return false; -- remove this statement when you modify this function
        -- Administrator note: the procedure_name input parameter may be in the format:
        --    procedure
        --    schema.procedure
        --    package.procedure
        --    schema.package.procedure
        -- If the expected input parameter is a procedure name only, the IN list code shown below
        -- can be modified to itemize the expected procedure names. Otherwise you must parse the
        -- procedure_name parameter and replace the simple code below with code that will evaluate
        -- all of the cases listed above.
        if upper(procedure_name) in (
              '') then
            return TRUE;
        else
            return FALSE;
        end if;
    end wwv_flow_epg_include_mod_local;
    /Varad

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    how can i find out what the fix is that works..please

  • While typing, the keyboard starts typing multiple letters. I'm fed up of this. I don't think I am doing something at my own, it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this.

    While i type, the keyboard starts typing multiple letters. I'm fed up of this. I think it's happening at its own. Is it because of some problem in the hardware since OS and system refresh could not resolve this please help.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If you have done this like I describe above and the problem continues I suggest you contact Apple Support or make an appointment at an Apple Store and have your iPad examined by a technician.

Maybe you are looking for