AA company code problem

In asset accounting, I had created an asset class and also defined the number range interval for the same in my company code 1234. But later, when I tried to view the number range intervals using my company code 1234 ( Financial Accounting- Asset Accounting- Organisational Structures- Asset Classes- Define Number Range Interval), a message came up which said that company code 1234 does not exist. But at the same time, I could see my number range intervals for my co. code 1234 when I clicked on Number range object- Overview from the menubar. Kindly tell me why that message about co.code not existing been displayed.

Hello,
Please try following solutions which provided to other customers who
reported the similar cases:
Please, check whether these co.codes exist in table T093N
If not, please try the transaction AO11 and just over write  the values
you see with exact the same value, then save it.
This should produce entries in T093N.
After having created these entries you shouldn't get the error message
NR011 when performing AS08. Please test it with one entry first and
check the table T093N.
hope this helps
Ray

Similar Messages

  • Company code problem in Controlling area Tcodes

    Hi All,
    We are following role based authorisation for creating roles for FI/CO module and we are seggregating roles as per the company codes.We are assigning Tcodes like KO01,KO02,KO03(Internal order) and KS01,KS02,KS03(cost center) which are connected with Controlling area in one role.We have 5 company codes and we are trying to create 5 roles with the above Tcodes for 5 different company codes.
    The problem we encountered is when we entered the Tcodes in the role, and we get to the 'Change authrisation data' option in the 'Authorisation' tab in PFCG, the system is not prompting for the Company code organisational level. Hence in this case, a user will be able to access the above mentined Tcodes for all the company codes. But we need to create a role in such a way that a user who is assigned this role is only able to access Tcode like KO01,02,03 etc for his company code only and should not be authorized to access these Tcodes for remaining 4 company codes.
    Can anybody please help me with a way to restrict these Tcodes to a particular company code in our scenario.
    Thanks and Regards,
    Abdul Khyoom A.

    Hi Ashok,
    Thanks for the response.
    Here in my case, when I insert the Tcodes related to conrolling like(KO01,KO02,KO03 etc) in a role, then I dont find any authorization objects(bukrs) which is related to the company code in the authorization genaration area in PFCG. So there is no way I can maintain values in them.
    Please suggest any alternate solution.
    Thanks and Regards,
    Abdul Khyoom A

  • Asset, internal order and company code problem (AA982)

    HI
    Is it possibly on fixed asset that belongs to company code 1 to assign internal order (actual) for depreciation, that belongs to company code 2. We receive error (AA982); Company code for order is not company code for asset.
    SAP note 431367 says no.
    Eny proposals.
    Thank you for help.

    hi
    you should not assign the same company code.

  • How to build search help for company code (BUK) in SRM

    Hello,
    I am new to SRM and was wondering if any have come across similar requirement. I am a workflow developer and we are building a custom table to derive deadline escalation timelines. We are also adding a field in our custom table for company code so that we can have company specific deadlines. table T001 is empty in SRM and hence we are unable to use F4 (search help). Is there existing functionality in SRM that gets this search from the backend ECC system and displays when F4 is pressed. How can I use that functinoality?
    Appreciate any info folks.
    Thanks again.
    Samir

    Hi
    Which SRM version are you using ?
    <b>Related links -></b>
    Re: Search Help on SRM front end screen
    F4 Help for WBS Element
    Re: Company Code defaults
    Re: Search help for Custom Item level field
    Custom field in SRM as a dropdown field with values stored in R/3
    Calendar help for Date i/p field in SRM 5.0 shopping cart
    Company code
    Problems assigning values via F4 or search help
    Also There is a standard table in SRM which contains Plant data ->
    <b>BBP_LOCMAP</b> (Mapping Table Business Partner --> System --> Location)
    Try creating a  custom search help based on this Table, defined as selection method and assign the same to the related field.
    Do let me know.
    Regards
    - Atul

  • Problem with assigning chart of Depreciation to company code

    Hi Everybody
    I am just trying to assign chart of accounts to company code. I get the following error message:
    Inconsistency between FI company code 9100 and chart of deprec. 9100
    Message no. AC481
    Diagnosis
    You tried to assign chart of depreciation 9100 to company code 9100. According to its Customizing definition, this company code manages parallel currencies.
    The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
    System response
    This assignment is not possible.
    Procedure
    1. Check the currency types of the company code.
    2. Specify a corresponding depreciation area for each currency type.
    I have maintained parallel currency for the company code i.e. Currency for Leading ledger is INR and the 2nd and 3rd local currency is EUR and want to keep this setting unchange.
    Can anybody help me to solve this problem.
    Thanks
    SIM
    Edited by: SIM on May 5, 2008 11:10 AM

    hi all
    can anybody help us to solve this issue.
    thanx
    vijay

  • Problem for creation of PO for different company code

    I have problem for creation of PO using ME21 for different company code.Order is not created.
    Please give reply it is urgent.

    Hi Mansih,
    I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
    Have a nice day!

  • Problem with LSMW - G/L Account Centrally for 2 or more Company Codes.

    Hi,
    I have a problem with an LSMW  G/L Account Centrally Master Data.
    I used the Object: 0010   GL A/C Master Record, and the Method: 0001   Hier. structure.
    I can create massives Accounts but I can't create Same Accounts with differents Company Codes.
    Please, somebody can explain me, how create Same Accounts with differents Company Code in masive form with LSMW?
    Thanks and Regards!

    Try this report RFBISA10:  "Copy General Ledger Account Master Data: Send"
    or RFBISA20: "Copy G/L Account Master Data in Target Company Code: Receive"
    Bye.

  • Problem with STO-cross company code

    hi,
    I am configuring  STO process for cross company code( plants in different company code). I have done all the config. When creating the PO i am entering the supplying plant, i am getting the error "Purchasing organisation xxxx is not responsible for Plant YYYY".  Could some one pls. suggest what may be the problem?
    Thanks & Regards,
    Pathanjali Bhat

    Hi Pathanjali,
    For cross company STO, the prerequiste is.
    1.0 You have to create a customer in SUPPLYING PLANT and assign to RECEIVING PLANT.
    ex: for plant:3000, sales org:3000,dist. chanl:12, divn:00.
    and assign to plant:1000 in spro sto setting.
    ( **maintain shipping notification**)
    2.0 Create a vendor in receiving plant .
    3.0 Here doc type:NB.
    4.0 Maintain supl. plant rec. plnt. and doc type in spro.
    5.0 Maintain del type: NLCC.
    6.0 Maintain supplying plant in vendor master in purchasing tab>extras> add.purchasing details--> maintain supplying plant here.
    Create a PO .
    enter vendor which u have created.
    ex u r procuring for plant 3000.
    maintain pur org, cocode 3000, here ( I think u might have done a mistake here).
    maintain plant 3000 in item details tab.
    enter the matl. price and qty and check the  status.
    If every thing ok save.
    Then
    go to VL10B, maintain del. date (should be before than ur delivery date in PO)
    press F8.
    ur po line item comes.
    select the line item press back ground button
    one more line item wil comes.
    select any line item, press log. u wil get new screen.
    place a cursor on that and press doc details button,
    system shows the delevery note. make a note of no. come to LT03.
    maintain required fields, select back ground processing. and select 2 below that field( ie pick and post) and press enter.
    system picks and post the doc.
    now check in PO history. 641 mvt has taken or not?
    if not do once again LT03.
    Rewert back if any clarification.
    Reward if useful.
    regards
    Viru

  • Peculiar problem in LDB ADA with company code selection

    <h5>Hello Colleagues, </h5>
    Faced a peculiar problem with company code selections in LDB ADA. Entered depreciation area, dep posting perios, lower and higher value of company code and would like to except few companies from selections. On pressing extension button, error message "Depreciation area 01 is not defined in chart of depreciation" is popping up and not allowing to provide exceptions for company codes. But working well in development systems. We are using ECC 6.0 systems and in both systems we have same lines of code for SAPDBADA.
    During debug, found that in development system, control coming to initial statements after PAI event. But in other systems, control skips few initial commands after PAI and directly jumps to later commands. Due to this FNAME parameter in PAI subroutine setting with '*' in other systems and 'BUKRS' in dev system.
    Could anybody give me some thoughts of why system behaving differently?
    Thanks and Regards,
    Prasanth

    Some - or most? - ODBC driver, especially MS for SQLServer and Access, don't support these advanced JDBC features.
    Like the messages says: they are optional features, and the driver doesn't implement them.
    A good news:
    you don't need them.
    Just go through your ResultSets only forward by next(), and do all inserts, updates and deletes with executeUpdate() and SQL commands.

  • Problem in uploading data for multiple company code in FB60

    Hi Experts,
    I am uploading data to tcode FB60 using bdc. If I have say 2 records in my file with same company code,
    It;s successfully posting the invoices.
    But if there are records with different company code, it's posting only the first one.
    Please suggest me some solution.
    Thanks.
    Krishan

    Hi,
    This is a njoy tcode....U have to do some settings before using the tcode....
    Go to tcode FB60 and give the company code ( if it is ur first login to the tcode then only it wil ask) .then u will get the screen to enter the document number and other stuffs....
    In that screen go to EDIT OPTIONS BUTTON on application tool bar on the right hand upper corner...
    U will get another screen in that check the check box which says NO COMPANY CODE PROPOSAL..and click on save .....
    After use this tcode for the bdc program and no error will come.
    Please let me know if u have any problems...
    Regards,
    Rohan.
    Edited by: Rohan on Feb 2, 2009 12:29 PM

  • Problem in setting up new company code

    Hi,
    I have encountered some problem when setting up a new company code.
    1) Company code currency not same as currency in workflow variant
    this error appears when setting up in OBY6
    2) Company codes entries are incomplete
    one or more of the fields are affected : currency, chart of accounts, fiscakl year version, input tax indicator for non-taxable transactions.
    Please advise how to resolve the above errors.
    Thanks ain advance.
    Li

    In OBY6 delete the value against Workflow variant and save your entries.

  • Material Extend Problem within same company code

    hello all,
    In my company there is one company code '1000' and TWO plant 'ABC' & 'XYZ'. problem is that when i extend the material in XYZ plant from ABC then when i change somthing in material view in any plant then it is getting reflected in other plant also. it is same hapening during BOM extend. can anyone please tell me why it is hapening? is there any solution for the same?
    Regards saurabh.

    Hi
    Can you explain little more ? like what field you have changed?
    If you change the fieldd which are specific to the client level then it will reflect in both the plant.
    THanks/karthik

  • About 1000 company code sales order problems

    hi
    frnds i am facing a problem in sales order  when i create a sales order in 1000 company code sales org 1000 dis chan 10 div 00 then a error is occured that is  "o version is missing in the fiscal year 2007" can any one help me plz

    Hi,
    This is a standard error you get in IDES
    Simply oen the error message and follow the link given in the message.
    It will take you to maintain FI SPRO setting.Copy exsisting year 2006 and create new entry for 2007 and maintain Version as 0.
    Your problem will be solved.
    Reward points if useful
    Regards,
    Amrish Purohit

  • New Company Code Creation Problem

    Hi Experts..
    We are having 10 company codes, i got a requirement to create another company code.  I have used one of the earlier company code to create a new company code.
    It is giving me the following error while trying to post a document in a testing server.
    <b>Could not determine the year for TDS Certificate number range</b>
    Message No: 8I017
    Diagnosis
    The excise year could not be determined for generating the numbers for TDS Certificates. The number range is linked to the excise year and not on the fiscal year directly.
    Procedure
    Check the customizing done for the company code in the India Version IMG.  Maintain the start month for the excise year correctly.
    Please provide me your valuable inputs on this.
    Thanks
    Kiran

    Hi Naveen
    Thank you so much for your reply...
    The company code which i have choosen to copy is functioning properly in the production server.  That is why i have copied.  I need to create some more company codes..  Creation of codes involves from the scratch involves lot of work.
    Please guide me how to rectify the error.
    Thanks
    Kiran

  • BAPI_ACC_DOCUMENT_POST- Cross Company-Code Posting problem

    Hi,
    I am using BAPI_ACC_DOCUMENT_POST in a program to post a GL document.
    The program works fine for single company code posting.
    For <b>cross company-code posting</b>, i.e. when my upload file contain more
    than 3 company code,
    The document gets posted and uploaded in SAP but the posting result i.e
    for clearing accounts is incorrect.(clearing accounts of post in company is not generated)
    FYI, There is <i>no error message returned from BAPI</i>.
    Am I possible to do this with bapi, so I have to split my doc and post
    it pro company code?
    Thanks in advance.
    Best Regards,
    Hikaruno

    Hi,
    It seems the G/L account is a reconcillation account..Try with another G/L account and see.
    Regards,
    Nagaraj

Maybe you are looking for