Peculiar problem in LDB ADA with company code selection

<h5>Hello Colleagues, </h5>
Faced a peculiar problem with company code selections in LDB ADA. Entered depreciation area, dep posting perios, lower and higher value of company code and would like to except few companies from selections. On pressing extension button, error message "Depreciation area 01 is not defined in chart of depreciation" is popping up and not allowing to provide exceptions for company codes. But working well in development systems. We are using ECC 6.0 systems and in both systems we have same lines of code for SAPDBADA.
During debug, found that in development system, control coming to initial statements after PAI event. But in other systems, control skips few initial commands after PAI and directly jumps to later commands. Due to this FNAME parameter in PAI subroutine setting with '*' in other systems and 'BUKRS' in dev system.
Could anybody give me some thoughts of why system behaving differently?
Thanks and Regards,
Prasanth

Some - or most? - ODBC driver, especially MS for SQLServer and Access, don't support these advanced JDBC features.
Like the messages says: they are optional features, and the driver doesn't implement them.
A good news:
you don't need them.
Just go through your ResultSets only forward by next(), and do all inserts, updates and deletes with executeUpdate() and SQL commands.

Similar Messages

If Company has one to one relationship with Company code

Dear All,
If Company has one to one relationship with company code in the transaction system (ECC),
can we use company in place off company code - in the BCS system?
That is, in this case - under consolidation units
- company,
i will be using the ECC companies rather than ECC company codes as consolidation units.
Request your insights.
Cheers
Kumar

Actually, I almost always use the company, not the company code. The difference is in the different number of attributes, and the type CHAR 4 or 6. 0COMPANY is the standard infoobject for using in SEM-BCS.
Though, I also used the custom infoobject for ConsUnit. Not a problem. Everything works. Just one needs to be careful with infoobjects which are the references to the Company IO.

Display users along with company code assigned to them

Hi,
I would like to display list of users with company code assigned to them
Thanks & Regards,
Rajesh Kale

Hi himanshu,
I want list of user using complex selection criteria.
It can be display using tools -> Administration -> User maintenance -> Information System -> Users by complex selection criteria.
Here, I am facing the problem that which authorization object I should put so that I can get list of users in which in front of every user I get the company code assigned to them.
Regards,
Rajesh

Assign chart of dep with company code

Hi All SAP Guru,
I want to Assign new chart of dep in company code. When i assign the system is not allow. It is not showing white color field. Please advice how can i assign the new COD.
Regards,
Pankaj

Hi,
Thanks for your quick reply. The COD is already assigned with company code. Client want to change COD. When i try to assign another COD. It is not allow.
Company code Company COD text
1000 ABC LTD BP00(want to assign new COD)
Regards,
Pankaj

DMS Document relationship with company code

Hi All,
I have to delete all DMS Documents for Document Type AAA and company code 8200. I am not able to find relationship between Document info records and company code in table level so can you please guide me How to get the relationship.
I checked with tables : DRAW, DRAD, AUSP... but not got proper answer.
-Thanks,
Ajay

Hi All,
Thanks for your replay. This issue is resolved.
In transaction CV04N with classification tab I have to option of Company code. I am able to get list of DIR's with company code and document type.
-Thanks,
Ajay

Assignment of Purchase Organization with Company Code and Plant

Please give me solution to Assign Purchase Organization with Company Code and Plant. While creating a material in organization level plant and purchase organization should be assigned.
Please help me out.
Thanks

Hi,
I am not sure if i have really understood your query.
Material creation means creating master data, as far as creation and assignment of organization elements with other organizational elements are concern for eg : purchase org in you case is part of standard configuration.
You create Purchase org using t-code OX08 here you copy from and existing one and then chane the description of Pur org as per your requirement.
You assign Purchase Org using t-code OX01 to company code assignment, t- codeOX17 for plant assignment to Purchase Org.
Normally you do all your changes in Devlopment server save the changes in an transport request then move it to quality and production enviornment.
Hope this helps.
BR

SRM 7.0 company code selection for manual PO

Dear All,
We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
Does anybody know or help me how to select/enable company code selection for manual PO creation ?
Thanks in advance,
Best regards,

Dear Kumar,
Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y. When I enter the cost center, I got the error "Cannot purchase between company codes".
So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
Thanks in advance,
Best regards,

Authorization issue with Company code/ Cost center combination

Hi,
I am currently trying to restrict user access by company code and cost center combination.
We have roles defined for each user and I am trying to use the standard authorization object A_S_KOSTL in this role . It seems that since it is not a 'maintianed' object no activity can be assigned to this autorization object.
currently the values are :
company Code : 1110 , 1112, 1114
Cost Center : *
i am getting sy-subrc as 0 even when i test for company code : 1110 for a user with the above role.
My code is :
AUTHORITY-CHECK OBJECT 'A_S_KOSTL'
    ID 'BUKRS' FIELD '1110'.
F sy-subrc EQ 0.
AUTHORITY-CHECK OBJECT 'A_S_KOSTL'
ID 'KOSTL' FIELD '*' .
IF sy-subrc EQ 0.
    MESSAGE 'Success with KOSTL also' TYPE 'S'.
ELSE.
      MESSAGE 'Success with BUKRS only' TYPE 'S'.
ENDIF.
ELSE.
      MESSAGE 'Failure' TYPE 'S'.
ENDIF .
I get a subrc NE 0 for the KOSTL part. The test passes for BUKRS.
Please advise on how to proceed.
Thanks and Regards
Soumya

Okay, I misread the "NE". Sorry.
Have you done a syntax check on it?
Also compare to:
AUTHORITY-CHECK <object>
ID 'KOSTL' '*'.
I cannot confess to ever have done a "full" AUTHORITY-CHECK myself, but it is most likely the same as with DUMMY -> you should not use the FIELD statement as '' value if the data element does not know what a '' is...
Cheers,
Julius

Transfer for sp stock with company code

Hi
Need your help on the following scenario
The scenario involves 2 company codes A & B
company A creates a STO with account assignment sales order, since the STO is assigned to sales order, when company B delivers the product, SAP system does not find special stock, so company B first transfers the stock from unrestricted stock to sp stock and then creates a delivery.
The question is it possible to deliver from company B without sp stock assignment as company B is independent and not aware of company A's business.
Looking forward
Regards

Hi,
Your scenario seems like intercompany sales..
pls refer to the following links:
[http://www.sap-basis-abap.com/sd/configuring-intercompany-billing.htm]
[Intercompany sales process;
And you'll find many more discussions on this topic--pls search the forum.
Regards,
Raghu.

Invalid Business Area in combination with company code

Dear Expert,
I have just created a new business area, however, when doing a posting against the new business area I got prompted an error message "Invalid Business Area 7000 with combination of company code 0001". Could anyone tell me what setting did I miss?
Thank you

Hi...
As per your issue..i think your company is using validation for your business area avoiding miss usage.
In this case once created new business area you have to update new business area in GGB0 T.code at company code level
So go to GGB0 and click on Financial accounting -> line item -> here select your company code and click on business area here enter your new business area and save it after that come back one step and select your company code go to Validation at menu bar select transport.
I hope it will helps you and let me know if you have any doubts
Regards
vamsi

Plant Abroad functionality for South Korea with Company Code in India

Hi,
I need help on SD functionality set up with regards to Plants abroad functionality for the Parent company in India and a manufacturing Plant in South Korea.
Has anyone work on such scenarios with plant abroad in South Korea. If yes, please help with the SD setup especially CIN and taxation requirements from SD side w.r.t. a South Korean Plant.
Thanks a ton in advance.
Sameer

Hello Sameer,
I am working for Plants Abroad Funtionality for one Company Code with several Plants across Countries in Europe. Here there is a Standard feature given by SAP for INTRASTAT (Eupore) reporting. Also in Europe we can transfer stock from say plant in Germany to another PLant in France with charging any Tax.
But in your case you have Indian Company Code having Plant in South Korea... I don't know whether it is supported in SAP or not...
Also legally I wonder whether Indian Companies can own Plant in South Korea?
Infact most probably in your case there will be a seperate Company Code for Korean Plant... If that is the case then you don't require Plants Functionality.
Can you please further details of your Business Requirements?
Thanks,
Jignesh Mehta

Extending DS 0CO_OM_WBS_6 & 0CO_OM_WBS_7 with Company Code?

Hello
We currently use the SAP delivered solution for extracting data to BW from R/3 through data sources 0CO_OM_WBS_6 & 0CO_OM_WBS_7. This is read through the function module BWOMO_GET_WBSCTC1.
We would like to extend the selection criteria on the DS to allow selection on Company Code (BUKRS).
Does anyone know why SAP did not deliver this functionality with the ablility to select on Company Code or at least the option to add it to the selection criteria? It is currently greyed out and cannot be changed (other than writing an ABAP program to change the ROOSFIELD table in R/3) to allow selection on the BUKRS field.
As a non Abap-er I can't tell from the Function module if there is a reason for not using Company Code to select on. Does anyone have any experience of this type of change on these DS's specifically?
I've seen a similar question posted for 0fi_gl_4 regarding BUDAT but nothing on Company Code and these DS's.
Also, does anyone know of any documentation on the BWOMO_GET_WBSCTC1 function module?
Many thanks for any assistance. Points duly rewarded for useful information.
Lotta

Hi,
Load the data into the BW - you can see the result.
The data in the PS-tables are not imported. What you see in the CO-Tables?
You are right. I think also, that the data in the table CATSDB is not correct. But, the result is our interesting.
Sven

Problem in setting up new company code

Hi,
I have encountered some problem when setting up a new company code.
1) Company code currency not same as currency in workflow variant
this error appears when setting up in OBY6
2) Company codes entries are incomplete
one or more of the fields are affected : currency, chart of accounts, fiscakl year version, input tax indicator for non-taxable transactions.
Please advise how to resolve the above errors.
Thanks ain advance.
Li

In OBY6 delete the value against Workflow variant and save your entries.

CATSSHOW with Company code

Hi experts,
I have a requirement to create a report which works similar to the report CATSSHOW (TCODE: CADO: display timesheet data) but with a further selection filter of COMPANY CODE.
But before I create this I wanted to just check whether there is any standard report which caters to the need.
Your help would be definitely awarded.
Regards
RadhaMadhav

Hi Radha,
I suggest two options before going for a Customized report.
First click on further selections and select the company code .and set this as a variant to the respective users who could see the reports only based on the company codes which they need to see.
This could be done from the respective users login.
Second option is based on authorizations :
Create roles for this Tcode restricted based on Company Codes.
The first one should work fine .
Let me know if you need more inputs.....

HR - SRM Replication: Issue with company code and cost center

Hello Experts,
We have a scenario where we are trying to replicate the HR Org Structure into the SRM system.
All the standard settings have been made using relevant SAP Notes and other help available on SRM.
However, the company code and cost center for a particular position are not getting updated into SRM.
These details are present in the Inbound Idoc from the ECC system.
Is there any setting we may have missed out on?
Please help.

Hi
Kindly check your ALE Filter in BD64 in the sending system. You need to maintain the objects C K O S and infotype 1001 and related subtypes in the filter model.
Also check the Evaluation path that you are using to send data.
Regards
Vijay V

Peculiar problem in LDB ADA with company code selection

Similar Messages

Maybe you are looking for