AAA Session Context Error
Dear Experts,
We are using Cisco 7301 as our NAS for our DSL users and a third party software as Radius
We configured PoD radius server for our DSL . But it seems that radius can't remove the users from the NAS .
The following is the error
Dec 7 20:33:27.547: POD: Added Reply Message: No Matching Session
Dec 7 20:33:27.547: POD: Added NACK Error Cause: Session Context Not Found
The following is my config
aaa server radius dynamic-author
client <radius ip address>
server-key cisco
auth-type any
ignore session-key
ignore server-key
aaa pod server auth-type any server-key cisco
Regards
Haris
My Issue is fixed now
The "aaa session-id common" command was enabled already . But my Issue was different
I got two interfaces from NAS going to two different switches and both were seeing as two different NAS by radius . So sometimes the radius request go from one interface and comes from another interface and it was conflicting the session .
As per Cisco , For a call to be disconnected, all parameters must match their expected values at the gateway. If the parameters do not match, the gateway discards the packet of disconnect packet and sends a NACK (negative acknowledgement message) to the agent
http://www.faqs.org/rfcs/rfc2882.html
Regards
Haris
Similar Messages
-
Hello Guys,
I am using a Cisco 2951 with 15.3(3)M1, and when doing some tests with CoA i got the following error:
*Nov 7 10:34:24.780: COA: 1.1.1.1 request queued
*Nov 7 10:34:24.780: RADIUS: authenticator 52 CF BB 58 BB D5 69 4E - 59 3B 09 75 E9 83 54 4C
*Nov 7 10:34:24.780: RADIUS: User-Name [1] 2 ""
*Nov 7 10:34:24.780: RADIUS: Acct-Session-Id [44] 10 "0000002B"
*Nov 7 10:34:24.780: RADIUS: Vendor, Cisco [26] 42
*Nov 7 10:34:24.780: RADIUS: Cisco AVpair [1] 36 "subscriber:command=reauthenticate "
*Nov 7 10:34:24.780: RADIUS: Message-Authenticato[80] 18
*Nov 7 10:34:24.780: RADIUS: B6 78 8B EA DE 3B 73 26 57 53 C0 E7 47 89 2C 6D [ x;s&WSG,m]
*Nov 7 10:34:24.780: COA: Message Authenticator decode passed
*Nov 7 10:34:24.780: ++++++ CoA Attribute List ++++++
*Nov 7 10:34:24.780: 01EEAF6C 0 00000081 username(450) 0
*Nov 7 10:34:24.780: 01EEB7EC 0 00000001 session-id(408) 4 43(2B)
*Nov 7 10:34:24.780: 01EEB820 0 00000081 ssg-command-code(490) 1 32
*Nov 7 10:34:24.780:
*Nov 7 10:34:24.780: ++++++ Received CoA response Attribute List ++++++
*Nov 7 10:34:24.780: 01EEB7EC 0 00000082 reply-message(273) 16 No valid Session
*Nov 7 10:34:24.780: 01EEB820 0 00000002 error-cause(272) 4 Session Context Not Found
This is very strange, because the session-id is correct.
Can anyone advice me on this? Thanks!
DavidHello Manuel,
Thanks for all your help. Here is the show output
LNS#show subscriber session uid 47 detailed internal
Subscriber session handle: EC00005E, state: connected, service: Local Term
Unique Session ID: 47
Identifier: [email protected]
SIP subscriber access type(s): VPDN/PPP
Root SIP Handle: 5300005D, PID: 313
Child SIP Handle: 7900002F, PID: 318
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 19:52:55, Last Changed: 19:52:55
Switch handle: 211E
Interface: Virtual-Access2.2
Policy information:
Context 10EC39C0: Handle 7B00002F
AAA_id 0000003B: Flow_handle 0
Authentication status: authen
Policy internals:
Policy state : wait-for-events
Authorization type : AAA service
Active key : apply-config-only
Authorization active key : Auth-User
Last top level rule type : session-service-found
Client : SM
Last message from client : Apply Config Success
Last message to client : Apply Config Success
Current key list from client :
Identifier: Auth-Domain = "xxx.xx"
Identifier: Protocol-Type = 0 (PPP Access Protocol)
Identifier: Session-Handle = 3959423070 (EC00005E)
Identifier: Tunnel-Name = "LNS"
Identifier: Media-Type = 2 (IP)
Identifier: Input Interface = "GigabitEthernet0/1.2000"
Identifier: AAA-Acct-Enbl = 1 (YES)
Identifier: Authen-Status = 0 (Authenticated)
Identifier: Nasport = Vty Terminal: port 47 IP 69.17.193.90
Identifier: Auth-User = "[email protected]"
Network plumbing done yet : Yes
Network plumbing directive proposed : None
AIE handle : 2B00002F
AIE user ID : 47
AAA user ID : 0000003B/59
Authorization index : 0
Authorization priority : 1
Context : 7B00002F
North handle : 00000000
North callback : 00000000
South handle : EC00005E
South callback : 06B898A8
Current access-type : PPP
All access-types : [0] VPDN
: [1] PPP
No more keys available from : PPP
Session activated : Yes
Session inbound features:
Feature: QoS Policy Map
Input Policy Map: INTERNET-15Mb-IN
Session outbound features:
Feature: QoS Policy Map
Output Policy Map: INTERNET-15Mb-OUT
Configuration sources associated with this session:
Interface: Virtual-Template1, Active Time = 19:52:55
Pending status associated with this session:
Bind status: Success, Delay delete: No, Pending mask: 0
And the debug output for a reauthenticate command
*Nov 8 10:21:58.367: RADIUS: COA received from id 1 x.x.x.x:60590, CoA Request, len 108
*Nov 8 10:21:58.367: COA: x.x.x.x request queued
*Nov 8 10:21:58.367: RADIUS: authenticator 1D 92 FF 04 43 EA 0E 11 - DE 49 2F AE 81 46 42 78
*Nov 8 10:21:58.367: RADIUS: User-Name [1] 18 [email protected]
*Nov 8 10:21:58.367: RADIUS: Acct-Session-Id [44] 10 "0000003B"
*Nov 8 10:21:58.367: RADIUS: Vendor, Cisco [26] 42
*Nov 8 10:21:58.367: RADIUS: Cisco AVpair [1] 36 "subscriber:command=reauthenticate "
*Nov 8 10:21:58.367: RADIUS: Message-Authenticato[80] 18
*Nov 8 10:21:58.367: RADIUS: 7F CA 0A 96 A7 4C 5F 05 57 33 4D 36 D6 7A 37 7E [ L_W3M6z7~]
*Nov 8 10:21:58.367: COA: Message Authenticator decode passed
*Nov 8 10:21:58.367: ++++++ CoA Attribute List ++++++
*Nov 8 10:21:58.367: 01FCE77C 0 00000081 username(450) 16 [email protected]
*Nov 8 10:21:58.367: 01FCFBAC 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:21:58.367: 01FCFBE0 0 00000081 ssg-command-code(490) 1 32
*Nov 8 10:21:58.367:
*Nov 8 10:21:58.367: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:21:58.367: RADIUS(00000000): sending
*Nov 8 10:21:58.367: RADIUS(00000000): Send CoA Nack Response to 69.17.193.4:60590 id 1, len 62
*Nov 8 10:21:58.367: RADIUS: authenticator A3 EC 85 01 C3 31 E2 B3 - 25 22 38 79 DA 8E 95 46
*Nov 8 10:21:58.367: RADIUS: Reply-Message [18] 18
*Nov 8 10:21:58.367: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:21:58.367: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503]
*Nov 8 10:21:58.367: RADIUS: Message-Authenticato[80] 18
*Nov 8 10:21:58.367: RADIUS: AC 83 2A 7C DE 7D 78 8E B7 91 C9 F0 16 8B 86 D2 [ *|}x]
Even the PoA is not working
*Nov 8 10:24:04.022: RADIUS: POD received from id 4 x.x.x.x:57061, POD Request, len 66
*Nov 8 10:24:04.022: POD: 69.17.193.4 request queued
*Nov 8 10:24:04.022: ++++++ POD Attribute List ++++++
*Nov 8 10:24:04.022: 01FCFBAC 0 00000081 username(450) 16
[email protected]
*Nov 8 10:24:04.022: 01FCE77C 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:24:04.022: 01FCE7B0 0 00000081 Message-Authenticator(274) 16 20 2C D0 32 B2 B7 70 BC CE 0F 57 30 8A 0B 52 B7
*Nov 8 10:24:04.022:
*Nov 8 10:24:04.022: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:24:04.022: RADIUS(00000000): sending
*Nov 8 10:24:04.022: RADIUS(00000000): Send Disconnect Nack Response to x.x.x.x:57061 id 4, len 44
*Nov 8 10:24:04.022: RADIUS: authenticator 86 6C A4 7E EC E6 D8 DA - 30 03 38 E7 51 03 78 86
*Nov 8 10:24:04.022: RADIUS: Reply-Message [18] 18
*Nov 8 10:24:04.022: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:24:04.022: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503] *Nov 8 10:24:04.022: RADIUS: POD received from id 4 x.x.x.x:57061, POD Request, len 66
*Nov 8 10:24:04.022: POD: x.x.x.x request queued
*Nov 8 10:24:04.022: ++++++ POD Attribute List ++++++
*Nov 8 10:24:04.022: 01FCFBAC 0 00000081 username(450) 16 [email protected]
*Nov 8 10:24:04.022: 01FCE77C 0 00000001 session-id(408) 4 59(3B)
*Nov 8 10:24:04.022: 01FCE7B0 0 00000081 Message-Authenticator(274) 16 20 2C D0 32 B2 B7 70 BC CE 0F 57 30 8A 0B 52 B7
*Nov 8 10:24:04.022:
*Nov 8 10:24:04.022: RADIUS/ENCODE(00000000):Orig. component type = Invalid
*Nov 8 10:24:04.022: RADIUS(00000000): sending
*Nov 8 10:24:04.022: RADIUS(00000000): Send Disconnect Nack Response to x.x.x.x:57061 id 4, len 44
*Nov 8 10:24:04.022: RADIUS: authenticator 86 6C A4 7E EC E6 D8 DA - 30 03 38 E7 51 03 78 86
*Nov 8 10:24:04.022: RADIUS: Reply-Message [18] 18
*Nov 8 10:24:04.022: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
*Nov 8 10:24:04.022: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503]
Thanks!!
David -
Java error in session initialization Error - When calling IC Web client
Hi All,
When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
" Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
Pl suggest
Thanks
PRadeephi Indhra,
did you check, whether the services are active:
/Nsicf
/default_host/sap/bc/bsp/sap/
sam_sess_queue and sam_notifying
and the polling profile is defined with polling frequence:
/Nspro
->Interaction Center WebClient
->Basic Functions
->Define Context Area Profile
there "Define Polling Profile"
best wishes,
Hakan -
EJB Entity/Session Transaction error
I am getting an error from a Session EJB trying to update two distinct Entity EJB's. From the session bean I open a transaction and create two entity objects. But immediately after trying to create the first one I get the following message:
com.evermind.server.rmi.OrionRemoteException: Error allocating db connection: java.sql.SQLException: Calling setAutoCommit(true) on a Connection is not allowed during a global transaction.; nested exception is: java.sql.SQLException: Calling setAutoCommit(true) on a Connection is not allowed during a global transaction.
at com.evermind.server.ApplicationServerTransactionSynchronization.getConnection(ApplicationServerTransactionSynchronization.java:408)
at CWUsuariosHome_EntityHomeWrapper20.create(CWUsuariosHome_EntityHomeWrapper20.java:535)
at com.saniline.catweb.ejb.session.usuarios.UsuariosSessionBean.InsertarUsuario(UsuariosSessionBean.java:59)
at UsuariosSession_StatelessSessionBeanWrapper2.InsertarUsuario(UsuariosSession_StatelessSessionBeanWrapper2.java:81)
at com.saniline.catweb.servlet.ASS.ASS_editSSUserServlet.doPageService(ASS_editSSUserServlet.java:153)
at com.saniline.catweb.servlet.CatalogoWebServlet.doPageService(CatalogoWebServlet.java:168)
at com.saniline.snfw.servlet.SnFwSessionServlet.doPageService(SnFwSessionServlet.java:83)
at com.saniline.snfw.servlet.SnFwServlet.service(SnFwServlet.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.saniline.snfw.servlet.SnFwServlet.service(SnFwServlet.java:54)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
I am using JDeveloper 10.1.2.1.I am using CMP Entity beans. These have their methods specified as "Supports" and the Session Bean (Stateless) has its method as "Required".
I am using the container within the embeded OC4J server for debuging.
The transaction is created within the Session Bean as:
// Get a new transaction instance from session context
UserTransaction ut = sctx.getUserTransaction();
try {
// begin transaction
ut.begin();
// Current time
Timestamp currentTime = new Timestamp(new Date().getTime());
// Insert record in CWUsuarios
CWUsuarios newCWUsuarios = getCWUsuariosHome().create(null,
cwUsuario.getLogin(), cwUsuario.getPassword(),
cwUsuario.getNombre(), cwUsuario.getApellidos(),
currentTime, currentTime, cwUsuario.getActivo(),
cwUsuario.getRoot(), cwUsuario.getIdperfil());
// Insert record in CWPreferencias
CWPreferencias newCWPreferencias = getCWPreferenciasHome()
.create(newCWUsuarios.getIdusuario(),
cwPreferencias.getCodigoidioma(),
cwPreferencias.getIdtema(),
cwPreferencias.getNregslistados());
however after returning form the getCWUsuariosHome().create method i get the specified error message.
Thanks. -
Open Session: unexpected error
Hi everybody,
I'm using BO XI R3.0 and since couple of last days I'm having problem with opening Universe Designer. The message I'm getting is "Open session: unexpected error". This happens after I provide user name and password for the access to the system.
Does anyone know the solution to the problem beside uninstalling Client tools etc. (I already did that) because the same happens when I want to open Desktop Intelligence, Translation Manager, etc.
IvanIn addition to my previous question, I have another query. I am trying to create a macro to rename, hide/show and change some more properties of universe objects. Below is the code to log on to designer and open the required universe
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Set DesignerApp = New Designer.Application
DesignerApp.Visible = True
Call DesignerApp.LogonDialog
Set Univ = DesignerApp.Universes.Open
DesignerApp.Visible = False
Set Wksht = ThisWorkbook.Worksheets("Objects")
Wksht.Unprotect
Range("Objects").ClearContents
Call GetObjectInfo(Univ.Classes, 1)
Range("Objects").Resize(Wksht.UsedRange.Rows.Count - 1, 5).Name = "Objects"
Range("Objects").Columns("H:L").Value = Range("Objects").Columns("B:F").Value
Wksht.Protect
DesignerApp.Quit
Set DesignerApp = Nothing
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What happenns is that after I log on using my macro, if I try to log on to designer again I get the "Open Session: unexpected error" error. If I delete the LSI folder on my local machine, then I can log on fine. but everytime I use the macro I get the error afterwards. I am logging onto a SAP system.
Any help on this one? -
Crystal report server2008 (XI R2): CMC session timeout error
HI
Crystal report server2008 (XI R2): CMC session timeout error
Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine. But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
Regards,
Patrick RathsPlease post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
BTW., if thi is an important issue, I'd recommend creating a phone case.
Ludek
Edited by: Ludek Uher on Aug 11, 2010 1:58 PM -
#DATA Sync & # CONTEXT error in BI 4.1 with ECC 6 environment
I am getting the #DATA Sync & # CONTEXT error in BI 4.1 with ECC 6 environment. When i am adding Excel Sheet as asecondary source for BO report am getting this error. because of below,
Ecc data
Profit center -- 000100
Fiscal Year --- 2,014
Posting Period - 1 to12
Amount 2000
Excel Data
Profit center -- 000100
Discharge Date --- Q1 2014, Q2 2014,
Discharge Port --- Excelerate or Expediate, etc
I ahve created report Using ECC Data like, Profit center,Fiscal Year,Posting Period and Amount.
Now i want to Add from Excel Discharge Date and Discharge Port am getting the #DATA Sync & # CONTEXT error or Imcompatible object.
because i am anot able to merge these objects with ECC Objects. Can anyone suggest me what i can do to achieve this?
Cheers
Murali DurairajHi
Have you created two different data providers (one for ECC, another for Excel data)in
the webI report,
If yes -- check whether able to see data sample in the Excel data provider
Run the WebI Report -- Design Mode -- Edit -- Select the Excel Data Provider --
Check able to see the Data Sample data whichever there in the excel sheet.
If you are able to see the Sample data…then merge common objects (able to merge
only if both the objects have same data types.) then check the data in the
report. -
The session context in the socket project
hello
in the j2ee program,i can set the user login info in the session context(such
as user name and password or permisson),and trace them during the session,the
servlet container help me a lot.
but in my current project,i use the socket communication to connect the c# client
and the java server,after the client login in one socket connection,it must close
the socket,when it reconnect to the server to send the data,the server don't know
who it is,that is the server don't know whether the client login or not and if
the client is just one who has just login.
i wonder how can i implement the session function that is similar to servlet do
in my socket project?
who can help me?
thank you!!Hi Form
Any Enlightining Ideas.....
Still thinking. E.g. why the GUI is doing the authentication. Well it does have >> to prove a user ID. That'd be enough to identify a sessionOk after the UserId is authenticated , (???? Session ???) on a pure GUI...
How about doing further tasks, Also How to uses this Session API in a
Pure GUI env...
Plz
with regards
Karthik -
Context: Error loading external library
Oracle 8.1.5EE, Solaris 8 (x86)
create index quick_text on quick ( text )
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: ld.so.1: extprocPLSExtProc: fatal: relocation error: file
/oracle/app/oracle/product/8.1.5/ctx/lib/libctxx8.so: symbol ociepgoe:
referenced symbol not found
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
whats the problem ?!
null<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Omar Alonso ([email protected]):
Make sure that the Net8 listener is running and is configured to invoke external procedures.<HR></BLOCKQUOTE>
Of cause its running and configured as follows:
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM=extproc) (ORACLE_HOME=/oracle/app/oracle/product/8.1.5)
(SID_NAME=PLSExtProc)
tnsnames.ora:
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LD_LIBRARY_PATH - ok to lib and lib/ctx
+ /var/ld/ld.conf - correct
+ ENVS=LD_LIBRARY_PATH=... - set
I dont understand whats the problem ;-(
services looks like this:
PHNET3 has 5 service handler(s)
DEDICATED SERVER established:0 refused:0
LOCAL SERVER
DISPATCHER established:94 refused:0 current:13 max:254 state:ready
D000 <machine: phnet3, pid: 19391>
(ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34087))
DISPATCHER established:162 refused:0 current:13 max:254 state:ready
D001 <machine: phnet3, pid: 19393>
(ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34088))
DISPATCHER established:132 refused:0 current:13 max:254 state:ready
D002 <machine: phnet3, pid: 19395>
(ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34089))
DEDICATED SERVER established:0 refused:0
LOCAL SERVER
PLSExtProc has 1 service handler(s)
DEDICATED SERVER established:0 refused:0
LOCAL SERVER
null -
Revision: 21394
Revision: 21394
Author: [email protected]
Date: 2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.javaFor our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
Session context getting expired
Hi,
I am making a call from my application to other application.I am setting the session ctx in my application .
In my application i have a stateless session bean .If i do
mySessionCtx.getCallerPrincipal().getName());
lets say I am getting xyz.
My bean calls different applications which are also stateless session bean.
when the client session bean authenticates it is getting UNAUTHENTICATED but not xyz.So it throws exception .
The session time out is configured from websphere as 30 min.
The session gets timed out after 30 min the context xyz vanishes.So client bean is getting UNAUTHENTICATED instead of xyz.
How can i configure session time out or context to exist for some time it in my code?
One work around is changing timeout in websphere .But I need to configure in my code either session timeout or making session context to exist more than 30 min.
Thanks and RegardsSiva,
There can be many factors for this: 'ClientSessionExpireMinutes'
Defines the length of idle time that can pass before Oracle BI Presentation Server removes the user's client (browser) session information from its memory. This session includes user-specific state information such as request cache - dashboard page state - subject area information -connection information - and so on.
Make sure while testing you are not doing anything on OBIEE browser window i.e. its idle
Also, try to increase the minutes to say 240 and check how much time it takes ...??
This shud solve..as this is very common problem with such tags..its not 100% guranteed !! -
OBIEE 11g Repository Question: session context
The Metadata Repository Builder's Guide says in chapter 13, "Note: Alternatively, you can use the database session context to pass end user identity to the database. Use a connection pool script to set up session context. Note that this approach does not rely on database authentication."
However, no example or instruction is given to show/explain how to do that. Does anyone know how to set up a connection pool script to pass the :USER value to the database session context object? We have to pass the user ID of the Analytics user to the database so as to apply VPD policies.
Thanks,
KenI'm trying also to get work VPD with OBIEE 11.1.1.5, but no luck. I have done almost all the same as are in Venkatakrishnan's example. It seems that select statement with set function in "execute befire query" goes to the database, but it have no effort because query in Answers returns no rows, means that :USER is not forwarded to the policy function. Is it possible that statement in "execute before query" and Answer request are not in same database session? Have anyone got work VPD with OBIEE 11.1.1.5? Everything works ok for example in SQLPlus and in SQL Developer.
- Risto
Edited by: risto.soikkeli on 6.8.2011 17:56
Edited by: risto.soikkeli on 6.8.2011 23:04 -
Invalid Flow Context error in Inbound Queues
I am new to CRM middleware.
We are getting lot of entries in CRM Inbound Queue (SMQ2) in our production system with error description,
"Invalid Flow Context".
The queues are of type, "R3AD_CONNOBJXXXXXXXXXX" and the FM the error was caused in, is "BAPI_CRM_SAVE".
Can anyone help?
Thanks in advance!
RajivThanks Rohit,
When I debugged an entry with this "Invalid Flow Context" error, In method, CRM_GENERIC_CRM_IN, in the call to function, SMOF0_READ_SMOFSUBINT, in read statement,
read table t_smofsubint binary search
with key objclass = i_objclass
objname = space.
I am getting sy-subrc = 4.
i.e. entries do not exist for SI_POD in table SMOFSUBINT.
Has this behaviour got anything to do with this error? -
Weblogic 8.1 SP2 + Struts + Internal Servlet Session Process Error Found!
Hi,
I have developed a struts 1.1 based webapplication which runs fine on
weblogic 7 (for one year in production), tomcat 4.1,5 and others but
refuses to function in weblogic 8.1 sp2!
This is the stacktrace I get when I try to call an action via the browser:
java.lang.IllegalStateException: Internal Servlet Session Process Error
Found!
at
weblogic.servlet.internal.session.SessionData.checkProcess(SessionData.java:1148)
at
weblogic.servlet.internal.session.SessionData.setAttribute(SessionData.java:501)
at
org.apache.struts.action.RequestProcessor.processLocale(RequestProcessor.java:638)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:230)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1420)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:502)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197) at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Just out of curiosity I deployed the struts-examples webapplication from
the apache jakarta struts distribution and it also fails to run with the
same error!
Can anybody help me out with this one? Does anybody experience the same
thing?
regards,
oliver
p.s. I will also post this message on the struts user list.
Hi,
I have developed a struts 1.1 based webapplication which runs fine on
weblogic 7 (for one year in production), tomcat 4.1,5 and others but
refuses to function in weblogic 8.1 sp2!
This is the stacktrace I get when I try to call an action via the browser:
java.lang.IllegalStateException: Internal Servlet Session Process Error
Found!
at
weblogic.servlet.internal.session.SessionData.checkProcess(SessionData.java:1148)
at
weblogic.servlet.internal.session.SessionData.setAttribute(SessionData.java:501)
at
org.apache.struts.action.RequestProcessor.processLocale(RequestProcessor.java:638)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:230)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1420)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:502)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197) at
weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Just out of curiosity I deployed the struts-examples webapplication from
the apache jakarta struts distribution and it also fails to run with the
same error!
Can anybody help me out with this one? Does anybody experience the same
thing?
regards,
oliver
p.s. I will also post this message on the struts user list.
-
I was trying to create an index on some table
SQL>create indx doc_index docs(text)
indextype is ctxsys.contxt;
however I always got back all these errors
ORA-29855: error occured in the execution of ODCIINDEXCREATE routine
ORA-20000: COnText error:
DRG-10516: failed to perform DDL operation due to an Oracle error
ORA-01552: cannot use system rollback segment for non-system tablespace 'DRSYS'
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line34
ORA-06512: at line 1
I may not configure the InterMedia correctly, Is any body know what is the problem here??
Please Help
Thanks,
WeiIndextype is ctxsys.CONTEXT not "ctxsys.contxt".
Also please check your space availability.
null
Maybe you are looking for
-
I am using the most recent version of iTunes and when I connect my iPhone 5 to my Windows 7 pc, I can no longer see the screens for the iPhone in iTunes. I want to see them so I can rearrange my app icons. I see the apps but not in a iPhone screen vi
-
11 inch or 13 inch for creative programs? (Adobe CS6, Blender, etc)
Hello! I currently own a 15 inch Macbook pro and love it, but I have to get a new computer! The reasons why are that my father ('m a teenager, so I still live with my parents) needs a laptop for what he is doing, and because of my horrible, large, an
-
Hello friends, I installed tomact5.5 server and when I am giving the path in url as http://localhost:8080, it is asking username password when I gave the name it displaying unauthorized I tried with all I remember but unable to get. In console I got
-
Drag together a few technologies
Hi all My apologies as this is not a specific J2ME post but I'm writing to see if anyone has tried to drag together a few technologies. I'm trying to drag in Bluecove for bluetooth emulation with J2ME Polish so that I can test my app as well as attem
-
Attribute dimensions may only be added to sparse dimensions
Hello everyone, I got this error several times. It wouldn't be so surprising for me if my Account dimension would be set as dense. But it is set to be sparse... Could anyone help me with this? Maybe some details will be helpfull: I have created an at