Abap beginner

Hey experts,
I just want your opinions. I am new to ABAP and i need some suggestion on important trainings that needed for Abap development. So far iv attended ABAP workbench training and ABAP Programming in Human Capital Mgmt. Do you think its enough for me just my attending this 2 trainings and im competent enough? Iv seen a list of ABAP trainings and one of them is ABAP dictionary course. Do you think its important for me to attend this course?
or i can gain knowledge by just reading from some articles.
regards,
Laila

hiiii..
Pls dont take this training lightly. if u r going to make ur carrier in abap u must have the basic knowledge of abap dic. it is same as doing the java or c++ , without having the knowledge of c. u must attend the traing .
thanks.

Similar Messages

ABAP beginner HELP

Hi all,
Well, I am planning to migrate to SAP. Since I have much experience in software development I thought of exploring SAP ABAP. To use it I planned to download SAP Netweaver trial version and registered at SAP.com but now I am pretty confused to download exactly what? and any useful links for me to begin with.
Thanks
-Rehgrds

Hi Saad,
the SAP NetWeaver ABAP Trial Version at [http://www.sdn.sap.com/irj/scn/downloads] is a good place to start. You do not need ECC to practise ABAP.
The associated pages give you plenty of information on what the hardware requirements are and how to install it.
There is also plenty of stuff in the eLearning and the Wiki to get you going as well as plenty of books available if your budget allows.
As a beginner there is one thing I think you should be aware of. ABAP is a very old language that has been evolving for decades. It is SAPs strategy to make the ABAP language as backwards-compatible as possible. This means that language constructs that are 20 years old are still supported in the language alongside the latest language enhancements such as regular expressions, chaining of method calls, etc. For a newbie this mix of old and new can be at least distracting and at worst confusing.
Take your time to understand the old and the new to really appreciate ABAP.
Cheers
Graham Robbo

ABAP beginner need help~

Hi,I am a new user for ABAP programing,even I have not entered the right interface for programing.My problem is that I want to create a new program ,I typed SE38 to the ABAP edit, typed the custom program name such as Z_test ,after that I clicked "Create" ,a messagebox displayed "SAP System has status 'not modifiable'",does this mean I don't have the autorization for creating new program?But I selected System-Utilities-Debug ABAP in the menu,re-created ,I enter the ABAP Debugger interface,but the program name in it is not the one I created ,it is "SAPLWBABAP".I am very confused,Who can help me?

Hi Jerry,
Looks like you are trying to create a program in a SAP client where modifications to objects(Reports/ scripts/ screens..any workbenc objects) are restricted.
Usually SAP Quality and Production clients have such restriction.
YOu can only create objects like programs in SAP development client. So just findout from your basis guy whether you have development rights in the system to create programs or not?
YOu can download SAP ABAP trial version from SDN and can do practice ABAP programming. All kinds of object you can develop here.
The link for download is (Full ABAP Edition-Trial (with Web Dynpro for ABAP!))
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Thanks,
Ramakrishna
Message was edited by: Ramakrishna Prasad Ramisetti

Web dynpro abap beginner

Hi guys,
I want to learn WEB DYNPRO ABAP. I have knowledge of ABAP and ABAP OBJECTS. SO please help me out by sending good documents (self teaching) regarding web dynpro abap.
My email id is [email protected]
good documents will be rewarded for sure.
thanks & regards,
Prasanna

hi Prasana,
I have mailed you one pdf. its good for beginers.
Get screen shot pdf from this page.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9 [original link is broken]
All the best,
J.Joe

ABAP beginner's guides?

Hi all,
I am new to SAP. I was wondering if there are any guides to get started in ABAP.
Ideally below 50 pages would be good for me.
Also, I'd appreciate any links/docs on ABAP with respect to BW.
Thanks in advance
Ravi
<REMOVED BY MODERATOR>
Message was edited by:
Alvaro Tejada Galindo

HI,
get ABAP IN 21 days book and practice .. in BW most of the abap work would be .. writing start routines.. update routines.. transformation.. or some time reading data from cube/ods .. uploading data from file to ods... so with basic abap knowledge you can do these things... ABAP is a ocean.. so cant restrict to 50 Pages....
to through this book and practice.. and post in SDN.. be a active member you can see miracles happen in SDN...
thanks
Mahesh

OOPs ABAP - Beginner

Hai this is sankar,
OOPs in ABAP are new to me. can anybody suggest me how to move further (any useful links?) and how flow of control changes from normal abap program.
thanks and regards,
Sankar.

Hello,
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0a33479c-0b01-0010-7485-dc8c09d6bc69
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP:
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
Regards,
Beejal
**Reward if this helps

SAP ABAP beginner

hi,
Just now i have started to learn ABAP.Please send the links which will be useful to me as a fresher.

Hello hemalatha selvam ,
Check the below Links :
abap material
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
Dictionary
http://sapabap.iespana.es/sapabap/manuales/learnabap/
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb6e446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ea31446011d189700000e8322d00/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBDIC/BCDWBDIC.pdf
ABAP objects
Please check this online document (starting page 1291).
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Also check this links as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.futureobjects.de/content/intro_oo_e.html
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
ABAP OO in Action
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
ALV programs.
http://www.geocities.com/mpioud/Abap_programs.html
. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
ALV
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Top-of-page in ALV
selection-screen and top-of-page in ALV
ALV Group Heading
http://www.sap-img.com/fu037.htm
ALV
http://www.geocities.com/mpioud/Abap_programs.html
ABAP book
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
ABAP in 21 days
http://cma.zdnet.com/book/abap/index.htm
ABAP BASIC
ABAP in 21 days
http://cma.zdnet.com/book/abap/ch03/ch03.htm
You can also check for documentation in pdf files
http://www.easymarketplace.de/online-pdfs.php(very useful one)
Hope this answers your question.
Thanks,
Greetson

Table control in ABAP - beginner

I am not able to fill data from database in TABLE CONTROL.The table is displayed with columns(which i added in layout using dict option) but on runtime there is no data in it.I am trying this for the first time so kindly guide me.
Here is PBO and PAI code.
PROCESS BEFORE OUTPUT.
LOOP AT ITAB WITH CONTROL EMPTABLE CURSOR EMPTABLE-CURRENT_LINE.
ENDLOOP.
MODULE STATUS_0001.
PROCESS AFTER INPUT.
LOOP AT ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.
And here is Main Code.
REPORT ZDATA_FORM1.
TABLES: ZEMPLOYEE_MASTER.
CONTROLS EMPTABLE TYPE TABLEVIEW USING SCREEN 0001.
data: begin of itab occurs 0,
       emp_no like zemployee_master-emp_no,
       name like zemployee_master-name,
       city like zemployee_master-city,
      end of itab.
select emp_no name city from zemployee_master into table itab.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-UCOMM.
   WHEN 'EXIT'.
     LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT

Hi,
Please check the below code, MODULE should be in between Loop and End loop.
PROCESS BEFORE OUTPUT.
LOOP AT ITAB WITH CONTROL EMPTABLE CURSOR EMPTABLE-CURRENT_LINE.
   MODULE STATUS_0001.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0001.
LOOP AT ITAB.
ENDLOOP.
Thanks,
Sriram.

ABAP for BW

Hi Folks,
Can someone point me in the right direction for ABAP Programming for BW- (generating Update routines, transfer routines and Start Routines)....is there a book or any good websites/forums which concentrates only on ABAP for BW......... Help.sap.com is no good ......
Thank You,
Southie

Hi Southei,
you can try Sams Teach Yourself ABAP-4sup®-sup in 21 Days on http://cma.zdnet.com/book/abap/index.htm
also you can try my site http://www.geocities.com/dear_jayant/abap which i have created for BW user who needs little working knowledge of ABAP. However this site is not yet completed.
or use any search engine (like google,yahoo etc) and search for "ABAP beginner" ,"ABAP Guide beginners"
Regards,
Jayant Dhawale

Are you a Functional ABAPer?

Hi folks,
I started my career in informatics as a COBOL / mainframe programmer way back when the u2018Big Blueu2019 was the order of the day (it feels like as if it was a thousand years ago). Anyhow, as these legacy systems are on the verge of extinction, I decided to get into ABAP, thinking I can bank on my programming background. But it seems to me that the majority of the enterprises expect an u2018ABAPeru2019 to have instantaneous knowledge of any and all of their SAP modules, no matter what business they are in. God forbid if you say: Hey listen, Iu2019m a programmer and not a functional analyst and donu2019t know much about such and such area or so and so functionality. It is then that eyebrows are raised, eyes would start rolling and rumors would spread as to how unfunctional or better say dysfunctional you are!
Are u2018ABAPersu2019 supposed to be multiple Functional analysts, programmer(s), etc, all in one package? I mean, is this one of those: u201CBuy one, get many others for freeu201D deals? If that is the case, where do functional analysts come into play? Or am totally off base here and have lost it altogether?
I am just curious, how many u2018ABAPersu2019 have had the same experience and how did you remedy the situation, cause I am at my ropeu2019s end.
Yours truly
Unfunctional ABAPer

Ardavan, I saw your thread but haven't had a chance to reply until today. Even though you have closed it as 'answered', hopefully it's OK if I still add my 2 cents.
There are many similarities with my own situation. I too came to ABAP world from the mainframe background. Currently I'm actively searching for a new job and, just as you, I'm sometimes confused (if not disturbed) by what the employers are expecting from the ABAP developers.
I think it's safe to say that even an ABAP beginner would have some experience in at least one module. Naturally, an ABAPer cannot be expected to know as much as a functional expert. Basic familiarity with the tables (which may be found "on the netz"), document/process flow, basic terms (in "sapanese"), any ABAP related peculiarities (e.g. funky user exits and routines in SD) should be enough and this may be mastered in a month or so.
Also many modules "cross paths" frequently, so there is a good chance you in fact have more exposure than you think. E.g. SD frequently comes together with MM and FI. But what confuses me most is when the employers are looking for an ABAP developer with experience in HR, FI, PP, MM, WM topped with BI, XI, Web Dynpro and Java.
Why do employers do this? Well, for one - because with 10% unemployment they can. There are actually quite a few ABAPers out there (Otto? ) that might fit the description above. (Whether they'll be willing to work for this company at this location/salary - is another question.) Second, some companies really do have small SAP teams and one person might need to deal with many different things. This is rather an exception though and such companies might be more willing to consider someone who doesn't have everything on their "menu". Third, well, some companies just have poor talent management skills. They develop a unrealistic job description and then complain that they can't fill the position for months and all candidates are "unqualified". From my experience, these companies frequently end up either adjusting their expectations or happily hiring someone with a made-up resume.
(to be continued...)

Update routine code

Hi friends,
I have a field YREPCURR in the update rules, it needs to updated based on the attribute of /BIC/YREPCURR in 0salesorg
plz help me writing a routine for this field
help will be really appreciated, points would be fully awarded
regards,
veer

Hi
I'm giving it a try as a ABAP beginner myself!?!
TABLES: /BI0/PSALESORG.
data: YREPCURR like /BIC/YREPCURR-/BI0/PSALESORG.
select single /BIC/YREPCURR from /BI0/PSALESORG into YREPCURR where objvers = 'A' and
SALESORG = comm_structure-SALESORG.
if sy-subrc = 0.
result = YREPCURR.
endif.
OR
You can also use the option of Attribute of in the Update ruled mapping.
Regards,

BDC programming using Batch input Session.

Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121 ,19810607,MIADONG1234
423459,KIM EI HWAN122 ,19810607,MIADONG1235
433459,KIM EI HWAN123 ,19810607,MIADONG1236
443459,KIM EI HWAN124 ,19810607,MIADONG1237
453459,KIM EI HWAN125 ,19810607,MIADONG1238
463459,KIM EI HWAN126 ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
 LINE-SIZE 255
 MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL, "For Local file upload
 RECORD(200) TYPE C,
 END OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0. "BDCDATA itab
 INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0. "Message itab
 INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
 F_TBL TYPE FILETABLE. "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL, "FILETABLE structure
 STR_LOCAL TYPE TYP_LOCAL. "Local file structure
= Variable definition ================================================
DATA: LV_RC TYPE I, "Method parameter
 ENUMBER TYPE ZT601-ENUMBER, "Employee number
 NAME TYPE ZT601-NAME, "Employee name
 BIRTH TYPE ZT601-BIRTH, "Birthday
 HOMETOWN TYPE ZT601-HOMETOWN, "Hometown
 SYSVAL TYPE SY-SUBRC. "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'. "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME TYPE RLGRAP-FILENAME OBLIGATORY, "File path
 EXECMODE(1) TYPE C. "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
 STR_F_TBL,
 STR_LOCAL,
 ENUMBER,
 NAME,
 BIRTH,
 HOMETOWN.
REFRESH: F_TBL,
 TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
 EXPORTING
 WINDOW_TITLE = 'SELECT FILE'
 DEFAULT_FILENAME = '*.TXT'
 CHANGING
 FILE_TABLE = F_TBL
 RC = LV_RC
 EXCEPTIONS
 FILE_OPEN_DIALOG_FAILED = 1
 CNTL_ERROR = 2
 OTHERS = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
 READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
 F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
 MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
 MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = F_NAME
 FILETYPE = 'ASC'
 TABLES
 DATA_TAB = TBL_LOCAL
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 OTHERS = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
 MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
 SPLIT STR_LOCAL AT ',' INTO ENUMBER
 NAME
 BIRTH
 HOMETOWN.
*----- Data check Function module
 CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
 EXPORTING
 DATE = BIRTH
 EXCEPTIONS
 PLAUSIBILITY_CHECK_FAILED = 1
 OTHERS = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
 IF SY-SUBRC <> 0.
 MESSAGE E003 WITH BIRTH.
 ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
 PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RSRD1-TBMA_VAL'. "Field on Cursor
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=SHOW'. "Display button
 PERFORM BDC_FIELD USING 'RSRD1-TBMA'
 'X'.
 PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
 TBL_NAME. "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
 PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'DD02D-TABCLTEXT'. "Field on Cursor
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=TDED'. "Create entry
 PERFORM BDC_FIELD USING 'BDC_SUBSCR'
 'SAPLSD02'.
 PERFORM BDC_FIELD USING 'BDC_SUBSCR'
 'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
 PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'ZT601-CRUSER'. "Field on Cursor
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=SAVE'. "Save
 PERFORM BDC_FIELD USING 'ZT601-MANDT'
 SY-MANDT. "Client
 PERFORM BDC_FIELD USING 'ZT601-ENUMBER'
 ENUMBER. "Employee number
 PERFORM BDC_FIELD USING 'ZT601-NAME'
 NAME. "Employee name
 PERFORM BDC_FIELD USING 'ZT601-BIRTH'
 BIRTH. "Birthday
 PERFORM BDC_FIELD USING 'ZT601-HOMETOWN'
 HOMETOWN. "Hometown
 PERFORM BDC_FIELD USING 'ZT601-CRDATE'
 SY-DATUM. "System date
 PERFORM BDC_FIELD USING 'ZT601-CRTIME'
 SY-UZEIT. "System time
 PERFORM BDC_FIELD USING 'ZT601-CRUSER'
 SY-UNAME. "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
 PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/EBACK'. "Back
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'ZT601-CRUSER'. "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
 PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'DD02D-TABCLTEXT'. "Field on Cursor
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=WB_BACK'. "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
 PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RSRD1-TBMA_VAL'. "Field on Cursor
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=BACK'.
 PERFORM BDC_FIELD USING 'RSRD1-TBMA'
 'X'.
 PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
 TBL_NAME.
 PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
 FORM BDC_DYNPRO *
 Put Program-Id, Dynpro screen number, Start point
 into DBCDATA
--> PROGRAM *
--> DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
 FORM BDC_FIELD *
 Put Field Name and Value into BDCDATA
--> FNAM *
--> FVAL *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
 FORM bdc_process *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 CLIENT = SY-MANDT
 GROUP = 'Testsession'
 KEEP = 'X'
 USER = SY-UNAME.
IF SY-SUBRC <> 0.
 MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
 FORM bdc_insert *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 TCODE = 'SE11'
 TABLES
 DYNPROTAB = BDC_TAB
 EXCEPTIONS
 INTERNAL_ERROR = 1
 NOT_OPEN = 2
 QUEUE_ERROR = 3
 TCODE_INVALID = 4
 PRINTING_INVALID = 5
 POSTING_INVALID = 6
 OTHERS = 7.
IF SY-SUBRC <> 0.
 MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
 FORM bdc_close *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 NOT_OPEN = 1
 QUEUE_ERROR = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
 MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.

God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too.

How to convert the output of the report (program) to PDF file , Please HELP

Good Morning, ALL
I have done a small program in ABAP that lets the employee enters his information. Once the emplyee enters the information and executes the program, I want the result to be saved in a PDF file (in any kind of format). I did try to do this action BUT I couldn't. ( ABAP Beginner LOL ).
This is the code ( The main thing ):
SELECTION-SCREEN BEGIN OF BLOCK Yours WITH FRAME TITLE text-001.
PARAMETERS: NAME(15) TYPE C OBLIGATORY lower case,
            CITY LIKE NAME OBLIGATORY ,
            DATE LIKE SY-DATUM DEFAULT SY-DATUM   MODIF ID ZZZ,
            ID# TYPE C LENGTH 9,
            PHONE TYPE C LENGTH 10.
SKIP 4.
SELECTION-SCREEN END OF BLOCK Yours.
SELECTION-SCREEN BEGIN OF BLOCK More WITH FRAME TITLE text-002.
PARAMETERS: MALE RADIOBUTTON GROUP G1 DEFAULT 'X',
            FEMALE RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK More.
SELECTION-SCREEN BEGIN OF BLOCK Details WITH FRAME TITLE text-003.
PARAMETERS: P_DATE TYPE DATUM,
            Locate TYPE C LENGTH 30.
SELECTION-SCREEN END OF BLOCK Details.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'ZZZ'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Any useful help will be appreciated, THANK YOU

Hi
Try the below code.
REPORT ztest_notepad.
"Variables
DATA:
   l_lay         TYPE pri_params-paart,
   l_lines       TYPE pri_params-linct,
   l_cols        TYPE pri_params-linsz,
   l_val         TYPE c,
   l_no_of_bytes TYPE i,
   l_pdf_spoolid LIKE tsp01-rqident,
   l_jobname     LIKE tbtcjob-jobname,
   l_jobcount    LIKE tbtcjob-jobcount,
   spoolno       TYPE tsp01-rqident.
*Types
TYPES:
   t_pripar      TYPE pri_params,
   t_arcpar      TYPE arc_params.
"Work areas
DATA:
   lw_pripar     TYPE t_pripar,
   lw_arcpar     TYPE t_arcpar.
DATA:
   it_t100       TYPE t100 OCCURS 0 WITH HEADER LINE,
   it_pdf        TYPE tline OCCURS 0 WITH HEADER LINE.
"Start-of-selection.
START-OF-SELECTION.
l_lay   = 'X_65_132'.
l_lines = 65.
l_cols = 132.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      in_archive_parameters = lw_arcpar
      in_parameters          = lw_pripar
      layout                 = l_lay
      line_count             = l_lines
      line_size              = l_cols
      no_dialog              = 'X'
    IMPORTING
      out_archive_parameters = lw_arcpar
      out_parameters         = lw_pripar
      valid                  = l_val
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF l_val space AND sy-subrc = 0.
    lw_pripar-prrel = space.
    lw_pripar-primm = space.
    NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
ENDIF.
"Get data
SELECT *
FROM t100
INTO TABLE it_t100
UP TO 100 ROWS
WHERE sprsl = sy-langu.
" Writing to Spool
LOOP AT it_t100.
    WRITE:/ it_t100.
ENDLOOP.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
spoolno = sy-spono.
"Convert spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid   = spoolno
      no_dialog     = ' '
    IMPORTING
      pdf_bytecount = l_no_of_bytes
      pdf_spoolid   = l_pdf_spoolid
      btc_jobname   = l_jobname
      btc_jobcount = l_jobcount
    TABLES
      pdf           = it_pdf.
"Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename = 'C:\itab_to_pdf.pdf'
      filetype = 'BIN'
    TABLES
      data_tab = it_pdf
Hope this helps you.

How to avoid Posting Delivery

i am using IDOC_INPUT_DESADV1 for updating Purchase Order Confirmation Tab Details. I dont want to create a Inbound Delivery for that. I only need confirmation details but not inbound delivery. Can anyone help me out ....

Hi abap beginner,
can you explain in more detail? Purchase Order Confirmation Tab Details show inbound delivery details. An inbound delivery creates an order confirmation entry.
What do you want?
Regards,
Clemens

Calling standard printer driver program RVADOR01 from ALV report

I have ALV report (Sales order documents) and one of columns in report is icon type with print preview link (hotspot). When user press icon, I would like to call standard print program RVADOR01 (actually we have custom Z_RVADOR01 and custom smartform which are working fine when using Document -> Output in VA03) to display print preview. I don't know how to call (trigger) print driver routine and pass needed parameters to it (ex. SO number).
Marko

Actually I did that. But then you are at least three clicks away from print preview screen. For testing purpose I've created custom smartform and run it from my report. It is working like I want. Now, instead of my procedure I want to run standard printer driver program with needed parameters. I believe that all it needs is document number (vbeln) and all the rest is already there, program, smatform... I just don't know how to use it (ex. pass parameters).
I know I maybe complicating too much but I am ABAP beginner and want to learn as much as possible. Thank you anyway!

Abap beginner

Similar Messages

Maybe you are looking for