ABAP Export in MSCS ABAP+Java Import

Hi,
I have an ABAP export from an HRP system (not a cluster one). I 've set up a new MSCS system for HRP, which is ABAP+Java and I know want to import the db to this new system. Should I consider anything before or after the import? Will the Java work correctly after the import? Or should I set up again the MSCS system with ABAP only, import the db from old HRP system and then install a Java Add-In in order to work correctly?
Any help will be greatly appreciated. And pointly appreciated also. Thx in advance.

Hi,
As per your query you can check below link.
http://help.sap.com/saphelp_nw70/helpdata/en/04/285ea6a87f11d194a400a0c930df15/content.htm
Anil

Similar Messages

(ABAP+JAVA) system is too big to export/import

We have some NW04s and ECC6 dual stack systems that we want to frequently clone using homogeneous system copy method.
However they can be as big as many terabytes.
Is there a way to clone they using a way other than export/import?
Thanks!

Hi,
As of SAP NetWeaver 7.0, you can copy ABAPJava systems in one run using either database-specific methods or database-independent methods. In a ABAPJAVA stack system, you need to run a separate export for the Java engine to archive SDM and application specific file contents. You will have to supply that java Export location on the target system, while performing DB specific system copy procedure.
Please refer [system copy guide for ABAP+JAVA stack |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000670917&_SCENARIO=01100035870000000112&_OBJECT=011000358700000416402008E] along with the previously suggested links to get more information.
Regards
Bhavik G. Shroff

ABAP+JAVA system copy using 3rd party export/import tools

Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!

>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus

Perform an export for both ABAP & JAVA in one shot with WAS 640 SAPinst ...

Hello,
I have to perform an OS/DB Migration of a SAP XI 3.0 (WAS640-SR1), an ABAP + JAVA addin configuration.
I would like to know if SAPinst for WAS640 (and SR1) could perform an export for both ABAP & JAVA in one shot as it seems possible in NW7.0 SAPinst version. None of the WAS 640 OS/DB migration guides gives these possibility.
And if not not, could U confirm that I have to perform 1st an export (with R3LOAD) of ABAB stack, then an export (with JLOAD) of the JAVA one ?
And apply the same way for installation with R3load and JLOAD downloaded files ?
Thks in advance
Bernard Accoce
SAP Basis Consultant - TeamWork in Toulouse (France)

Hi Bernard,
No, both exports cannot be executed in one single step. You have to execute the procedure twice, once for ABAP and once for Java, like you already mentioned yourself..
For the import applies the same.
Kind regards,
Mark

Java Export ( ABAP+JAVA) BI 7.0

Could someone please help me to understand ..
1 . Purpose of java export
2 . Should we take java export immediately after database backup (ABAP) completes . how these two ( ABAP+Java) , how they are interrelated .
3. If database backup ( ABAP) fails for a given day , then is it fruitful to take java export of that particular day .
Thanks

Hi,
1. Purpose of java export
Because complete recovery of java system can only be possible with file ssytem recovery.
2 . Should we take java export immediately after database backup (ABAP) completes . how these two ( ABAP+Java) , how they are interrelated .
Yes
3. If database backup ( ABAP) fails for a given day , then is it fruitful to take java export of that particular day .
Nope it will not help you to recover the ssytem.
Regards,
Vamshi.

Error export from my database sql 2005 with Windows 2003 abap+java

Hi all
I'm trying to create an Export from my database sql 2005 with Windows 2003, but SAPINST starts with an error. ABAP+JAVA stack
While running the export preparation, I am getting the following error;
INFO 2010-09-08 12:12:43
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key is written to the logfile C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log.
WARNING 2010-09-08 12:12:46
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key" finished with return code 64. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
ERROR 2010-09-08 12:12:46
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64.<br>DIAGNOSIS: The connection parameters are wrong or the database server is shutdown.<br> SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log' for more information.
ERROR 2010-09-08 12:12:46
FCO-00011 The step getUsageTypes with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_Java_Prepare_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
Could anyone please help me out on this, if possible?
Thanks
JM

Hi,
please ensure that you use a SAP supported JDK as below:
716604 for the Sun JDK (Windows, Linux, Solaris)
709140 Recommended JDK and VM Settings for the WebAS630/640/7.0
And the re try the export pls.
Regards,
Snow

ABAP + JAVA MSCS installation on windows 2003.

Hello Everyone,
We are in process of installation of ABAP + JAVA in HIgh Availability on windows server 2003 , oracle database.
Our plan is to install ASCS, SCS, DB , CI on node A & DI on Node B.
In Installation guide its given that " Central instance installation " is to be done on local disk.
Can anyone explain why we need to do central instance installation on local disk?
Can we install central instance on shared disk instead of local disk ?
If yes, any other implicaiton later on.
Regards,
maitray.

Hi,
If you install CI on share disk than server performance will go down. since already you have ASCS & SCS on the same disk.
Thanks,
Vadivel

DB refresh on Netweaver 7.0 ABAP+JAVA system - Issue

Dear Folks
I am having an issue with starting the Java instance after system copy.
This is the situation
System QAS database was refreshed from system PRD.
Both the systems are on NW 7.0 Ehp1 SP 18, in a HPUX/ORACLE environment.
Our normal landscape is full of R3 systems so teh DBA's have been historically doing DB refresh by copying for teh Oracle fileystems and then renaming the schema and some post db refresh activities to get the DB in teh target system up and running. Pardon my terminologies I ma not a DBA. The abpove procedure has worked fine with R3 systems.
But with the above mentioned Netweaver system ABAP instance is running fine after refresh while Java instance is not since SMSICM-> Goto-> HTTP Server -> DIsplay Data is showing
HTTP Application Server Handler
ABAP Server operational        = TRUE
J2EE Server configured         = TRUE
J2EE HTTP port                 =
J2EE HTTPS port                =
J2EE Server operational        = FALSE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
There are no other dumps or errors in the system and teh startup logs do not show any error. I have looked up online and the System Copy Guide for 7.0 systems and I understand SAP recommends using sapinst. But I would like to know if there is a workaround to fix the j2ee instance.
I have seen a few forumns where people have had similar issues but no solution.
FYI, The the Instance_IDXXXXX in the SAP J2EE Engine- Config Tool in system QAS is that of PRD and there is no entry for the instance ID of the QAS system.
I have tried changing all the entries that are pointing to PRD under Cluster_Data-> Instance.properties.IDXXXX to that of QAS and saved and restarted but no luck as the Instance_IDXXXXX of QAS does not show up in teh config Tool menu.
All the properties files at teh OS level are pointing correctly to QAS, so I would liek to know if there is any way to change the config on eth DB level.
Thanks in advance.
sapkid

Hi,
When you go for ABAP+JAVA system refresh please always ose the JAVA export method .
Take the JAVA export of the source system with the help of sapinst.Check the j2ee_admin and the ddic password of source system.
then you need to get the offline backup of the Source system.
then import it on the target system wth the help of sapinst and in the middle it shall promt you to restore from the backup of the source system.
Always use this method as JAVA stores it file at file system level and in the database.So you need both the files .
Thanks Rishi Abrol

Homogeneous System copy of ABAP+JAVA stack ( PI )

Hi everyone,
I am planing to do Homogeneous system copy of our existing NW 7.0 SR3 PI System ( ABAP + JAVA).
Can anyone help me with step by step details to do in source system and target system?
Thanks..

Hi,
You should follow the system copy guide for the different option while doing the system copy
- database dependent
- R3load based (export/import)
The following document you can use as a reference, (note -this has been done on database dependent method)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000
Regards,
Debasis

Abap+java stack

Hi,
My sap is running on ecc6.0,linux with maxdb(abap+javastack) we are taking backup through database manager in tape.while restoring it will ask any java files.
Thanku

Hi
Thanks alot for ur quick response.
If I want to follow SAP System copy(export/import) procedure using sapinst tool , I need to shut it down the SAP instance , which is not possible everyday.
Is there any way out to take backup of ABAP+JAVA stack to tape and restore in another machine using last sucessfull backup using backup/restore procedure(Database Manager).
How can I take backup of ABAP+JAVA stack without shuting down the SAP Instance by using any sap standard tools (sapinst) and can be used to restore in any new machine in case of emergency?
ThankU

Help in ABAP+JAVA Homogeneous System copy

Dear BASIS Gurus,
We have SRM 4.0, Portal 6.0, BW 3.5 and XI 3.0 based on WAS 640, all with
ABAP+JAVA stacks in HP-UX B.11/Oracle 9.2.x.
We are planning Homogeneous System copies to refresh our Development
environment.
After reading the instguides, I'm a litle confused about the best
strategy to use.
Using SAPINST in the source System to export the Database, I have the
dump files with Database data.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yhanks in adavnce.
Best regards.
Arnaldo Calçada.

Hi Arnaldo,
There are basically two method of performing system copy.
1. Using database tool (you can use backup/restore procedure)
2. Using SAPINST tool (export/import)
This is applicable for both ABAP and JAVA.
Do I must run SAPINST again to get the JAVA data (both database and
filesystem data)?
It depends which method you are using.
In the target system do I must do two runs of SAPINST ? One for ABAP
and other for JAVA?
Yes if you are using 2nd method.
Hope this will help.
-Pinkle

ABAP + JAVA system copy

Hi
My enviroment is SAP ECC 6 (ABAP + Java add in though we don't use the Java stack) on Oracle 10g/Solaris 10.
I intend to do a system copy(PRD to QAS) using offline backup/restore method. Is this possible for a ABAP + JAVA system using this method ?
Thanks

> Karan , I'm just wondering I'm i supposed to do two separate system copies in the case ie One ABAP (backup/restor) & the other for Java(export/import)?
Read the system copy guide.
Basically you will
- start sapinst on the source system and choose "database specific method"
- start sapinst on the target system and select the same
Markus

ABAP +JAVA system copy process

Hello All,
We are in process of building a server from a existing ECC 6.0 ABAP + JAVA system.
We are using system copy process where we are restoring ABAP databse from source system.
My question is about the JAVA part.
How can we copy java part? Can we export only JAVA part from ECC 6.0 ABAP +JAVA system and import this to target server.
Please suugest the process.
Regards,
Manish

Hi Manoj,
When you are doing restore of your P(DUAL stack)system then it will automatically restores your ABAP and JAVA scehema table spaces(Normal usage).And If you are using sapinst then take a CI export(for file system/java settings etc) of your source system and then you have to import that in your target system later in the process.So this procedure will automatially serve for both ABAP and JAVA schemas. Importantly this procedue was highly recommended by SAP,so if you run into any issues then you can go ahead and raise a OSS msg.
Other guy already pasted the link for homogenious copy guides
But you can do your java export from command level also(with out using SAPINST) and later you can import it into your target system.This means you are exporting your JAVA schema table space and importing.Keep it in mind that you have to export your Target java scehema not source system .If you do so then its of no use because you have to perform all post steps for java stack also. You can export and import table j2ee table space from your OS level at DB host using "exp javascehma/pwd ........."(not a full fledged command) and then you do the same by perforing "imp........." after restore and recovery from your P(source) system.But this is not at all recommended by SAP but this will work!.
Let every one to know if you need anything more than this.

Passing values to ABAP/JAVA webdynpro appl. when workitem invoked from UWL

Hai,
We are using universal worklist for invoking a workitem. The workitme may trigger a ABAP/Java based webdynpro application. I have registered the tasks associated with the workitem in universal worklist.
I have few doubts in the integration part,
1. When a workitem is clicked in UWL, I want to get some values from the workflow container and show it on the webdynpro application. In the webdynpro application I can call a function module to get the values from workflow container by passing in workitem id.How can I pass a workitem id to webdynpro application when a workitme is clicked.
2. After the user open the workitem a webdynpro application is shown on the screen. Lets assume this screen is having "Approve", "Reject" and "Exit" button. When this button is clicked how to pass that information to workflow so that the workflow flow its paths.
Please let me know how to do this.
Thanks & Regards,
H..K.Hayath Basha.

Hai Chintan,
I checked the blog, and found the below code,
workflowrawdata =
    wd_context->get_child_node(
          'WORKFLOWRAWDATA' ).
CALL METHOD
              WORKFLOWRAWDATA->GET_ATTRIBUTE
         EXPORTING
                 NAME   = 'WI_ID'
         IMPORTING
                  VALUE = wi_id.
I have the following doubts in the code,
1. Where I have to put this code,
2. Using which data element or type I have to declare, "workflowrawdata".
3. Should I have to declare "WI_ID" in parameter tab of Webdynpro application.
4. In webdynpro application what I did is,
a. In the context of component controller, i have created attributes to store workflow id, and some attributes to store the value from workflow container.
b. I created a view and in view context i have created attributes to store workflow id, and some attributes to store the value from workflow container.
c. I created some UI elements in the view and binded that UI elements with view context.
d. I binded view context with the context of component controller.
e. I created a window and in the view context i have created attributes to store workflow id, and some attributes to store the value from workflow container.
f. I did context mapping between window context and component controller context.
g. I added the view to the window.
h. I created a inbound plug with name "START". This creates a method called "HANDLESTART" to this method I added a importing parameter named "WI_ID" and added the below code,
data : lo_node               type ref to IF_WD_CONTEXT_NODE,
       l_cont                 type standard table of swr_cont,
       l_cont_line            type swr_cont,
       rc                     type sy-subrc,
       l_wi_id                type sww_wiid,
       l_object               type SWOTOBJID,
       lv_workitem_attributes type swr_wihdr.
call method wd_context->get_child_node
     exporting
       name = 'WORKFLOWRAWDATA'
     RECEIVING
       child_node = lo_node.
lo_node->set_attribute( value = wi_id name = 'WI_ID' ).
l_wi_id = wi_id.
Please let me know what else i have to do to get the workflow id in ABAP-Webdynpro application.
Regards,
H.K.Hayath Basha.
i.

NW2004s: Homogeneous systemcopy ABAP + JAVA

When doing a combined ABAP + Java systemcopy via R3load procedure, the "old" configurations in the propertysheets on the filesystem may get lost.
What is the general procedure here to find out, what needs to be manually adapted after a systemcopy? I know the general "system copy guide" but that guide doesn't mention e. g. what to do if you copy EP 7.0 or a Solution Manager Diagnostics.
Markus

Hi Markus
In case of EP the configurations will be retained in the target system.You can just do one more step that is exporting the userdata from the ume of the source system(instance) and then after the installation of targret instance import it.
Other configurations will be retained.There are two post installtion steps metioned in the system copy guide.Please perform the same.
In case of solution diagnotices i am not so sure.Will try to find out and let you know
Award points if usefull.

ABAP Export in MSCS ABAP+Java Import

Similar Messages

Maybe you are looking for