ABAP + JAVA system copy

Hi
My enviroment is SAP ECC 6 (ABAP + Java add in though we don't use the Java stack) on Oracle 10g/Solaris 10.
I intend to do a system copy(PRD to QAS) using offline backup/restore method. Is this possible for a ABAP + JAVA system using this method ?
Thanks

> Karan , I'm just wondering I'm i supposed to do two separate system copies in the case ie One ABAP (backup/restor) & the other for Java(export/import)?
Read the system copy guide.
Basically you will
- start sapinst on the source system and choose "database specific method"
- start sapinst on the target system and select the same
Markus

Similar Messages

PI (ABAP+JAVA) system copy

It's said that PI (ABAP+JAVA) system copy is different from pure JAVA system copy or pur ABAP system copy.
Could you share your experience? Thanks!

Hi Christy,
For Java there is exe file, so by clicking that the java is installed on the system.
For PI check the below link
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=870863
For ABAP
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=784931
Java tools copy for SAP PI
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=784118
Regards
Ramesh

ABAP+JAVA system copy using 3rd party export/import tools

Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!

>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus

Abap+Java System Copy on NW2004

Hello Gurus:
I will be performing a system copy of NW2004 (not NW2004s) which is running on ABAPJava stack. How should I perform the system copy? I have gone thru the documents for ABAP system copy and Java System copy. What are steps that I need to follow to do the ABAPJava stack?
Huge thanks in advance.
Regards,
N.S
Message was edited by:
Narayanan Swamy

Hi Swamy,
Please refer these notes to clarify further.
Hom./Het.System Copy SAP Web AS 6.40 SR1 Java Note 785848 .
restrictions which apply to the system copy see SAP Note 711093.
Cheers,
Shaym

ABAP +JAVA system copy process

Hello All,
We are in process of building a server from a existing ECC 6.0 ABAP + JAVA system.
We are using system copy process where we are restoring ABAP databse from source system.
My question is about the JAVA part.
How can we copy java part? Can we export only JAVA part from ECC 6.0 ABAP +JAVA system and import this to target server.
Please suugest the process.
Regards,
Manish

Hi Manoj,
When you are doing restore of your P(DUAL stack)system then it will automatically restores your ABAP and JAVA scehema table spaces(Normal usage).And If you are using sapinst then take a CI export(for file system/java settings etc) of your source system and then you have to import that in your target system later in the process.So this procedure will automatially serve for both ABAP and JAVA schemas. Importantly this procedue was highly recommended by SAP,so if you run into any issues then you can go ahead and raise a OSS msg.
Other guy already pasted the link for homogenious copy guides
But you can do your java export from command level also(with out using SAPINST) and later you can import it into your target system.This means you are exporting your JAVA schema table space and importing.Keep it in mind that you have to export your Target java scehema not source system .If you do so then its of no use because you have to perform all post steps for java stack also. You can export and import table j2ee table space from your OS level at DB host using "exp javascehma/pwd ........."(not a full fledged command) and then you do the same by perforing "imp........." after restore and recovery from your P(source) system.But this is not at all recommended by SAP but this will work!.
Let every one to know if you need anything more than this.

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

ABAP+JAVA System Copy -- Administrator account getting locked

Hi,
I am in the process of doing system copy of my portal to a new server. As per the SAP instructions, I had updated the JDK and SP levels of my EP to the latest supported ones.
Now when i am doing JAVA Add-in Export of my system, SAPinst is throwing error that --
"Error connecting to http://Entportal:50000/sap/monitoring/SystemInfoServlet. The provided user data might be incorrect or user might be locked.:
and when I check the "administrator" user account, it is getting locked. Even though I manually unlock it and update the password is secure storage, still when I run SAPinst, again it is getting locked. I have also chnged the path of my temporary directory to c:\temp which has no spacees in it, according to SAP instructions.
I have raised the issue through OSS, but still, in the mean time can sombody help me?
Regards,
Mandar

Hi Akshay,
I am not using any ID. SAPInst itself is trying to access systeminformationservlet using administrator account. at this stage it is failing to get the correct password and thats why my administrator account is getting locked.
Regards,
Mandar.

BW 3.5 over ABAP+JAVA system homogeneus copy

Hello Gurus,
I making a BW homogeneus copy to other hardware (i want change the hardware).
I check the WAS Abap and WAS java homogeneus copy guide, but i am really confused.
I think follow this steps:
1.- Install central instance ABAP (only WAS ABAP)
2.- install DB instance ABAP
3.- restore de BD
4.- export JAVA ADD-in in source system
5.- import JAVA ADD-in in target system
6.- post processing
I dont know if after step 2 I must install the Java ADD-in in target system ( the BW system is over ABAP+JAVA system).
or the import java add-in install the java component?
Regards,
Ernesto.

Hello Ernesto,
There are two ways to perform the system copy
1. Database Specific
2. Database independent
I beleive you are trying to do Database Independent system copy that is by creating export cd of source database and use them for system. For your environment which is WINDOWS + MSSQL on 6.40 SR1.
Please refer to documents
Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1
Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS Java 6.40 SR1
To answer your original question, You install the Java Add-In using the Java export on Target System. I have summarized the process flow below
From document "Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS Java 6.40 SR1
check section 4.2 Database-Independent System Copy (Jload Procedure)
Process Flow for the Source System (Java Add-in)
On Source System: Windows
1. You run SAPinst to perform the Java export [page 64].
We recommend that you perform the export as a test run before you perform a productive run. Deselect the option Stop J2EE cluster before export on the screen Java System > Database Export when running SAPinst for a test run.
2. You run SAPinst to perform the ABAP export as described in the documentation Homogeneous and Heterogeneous System Copy for SAP Systems based on Web AS ABAP 6.40 SR1.
3. If required, you can run the SAPinst GUI in standalone mode to perform a remote system copy [page 86].
On Target System: Windows
1. You perform the ABAP import as described in the documentation Homogeneous and Heterogeneous System Copy for SAP Systems based on Web AS ABAP 6.40 SR1.
3. For more information, see Running SAPinst on Windows [page 64].
4. Java import: You install the Java Add-In using the Java export.
You must check the documentation Installation Guide u2013 SAP NetWeaver u201904 SR1 Java on <your OS> : <your database>, Part II u2013 Installation and Post-Installation for details concerning the installation of your database that cannot be covered by this documentation.
a. Central System: You run SAPinst to install the target system and perform the import [page 64].
Hope this helped you let me know if you still have concerns.
Thank you,
Praveen

DB refresh on Netweaver 7.0 ABAP+JAVA system - Issue

Dear Folks
I am having an issue with starting the Java instance after system copy.
This is the situation
System QAS database was refreshed from system PRD.
Both the systems are on NW 7.0 Ehp1 SP 18, in a HPUX/ORACLE environment.
Our normal landscape is full of R3 systems so teh DBA's have been historically doing DB refresh by copying for teh Oracle fileystems and then renaming the schema and some post db refresh activities to get the DB in teh target system up and running. Pardon my terminologies I ma not a DBA. The abpove procedure has worked fine with R3 systems.
But with the above mentioned Netweaver system ABAP instance is running fine after refresh while Java instance is not since SMSICM-> Goto-> HTTP Server -> DIsplay Data is showing
HTTP Application Server Handler
ABAP Server operational        = TRUE
J2EE Server configured         = TRUE
J2EE HTTP port                 =
J2EE HTTPS port                =
J2EE Server operational        = FALSE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
There are no other dumps or errors in the system and teh startup logs do not show any error. I have looked up online and the System Copy Guide for 7.0 systems and I understand SAP recommends using sapinst. But I would like to know if there is a workaround to fix the j2ee instance.
I have seen a few forumns where people have had similar issues but no solution.
FYI, The the Instance_IDXXXXX in the SAP J2EE Engine- Config Tool in system QAS is that of PRD and there is no entry for the instance ID of the QAS system.
I have tried changing all the entries that are pointing to PRD under Cluster_Data-> Instance.properties.IDXXXX to that of QAS and saved and restarted but no luck as the Instance_IDXXXXX of QAS does not show up in teh config Tool menu.
All the properties files at teh OS level are pointing correctly to QAS, so I would liek to know if there is any way to change the config on eth DB level.
Thanks in advance.
sapkid

Hi,
When you go for ABAP+JAVA system refresh please always ose the JAVA export method .
Take the JAVA export of the source system with the help of sapinst.Check the j2ee_admin and the ddic password of source system.
then you need to get the offline backup of the Source system.
then import it on the target system wth the help of sapinst and in the middle it shall promt you to restore from the backup of the source system.
Always use this method as JAVA stores it file at file system level and in the database.So you need both the files .
Thanks Rishi Abrol

How to Changing Productive Client in an ABAP+Java System?

How to Changing Productive Client in an ABAP+Java System?

1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME

J2EE logon groups in an ABAP+JAVA system

Hi,
We are trying to restrict java calls to specific App servers in our ABAP+JAVA system. So if we have 5 App servers, we want all J2EE requests to go to 3 Apps only.
We are using SAP web dispatcher for this purpose. When checking on SAP help site, it suggested two options.
1) Configuring Logon Groups on AS Java
2) Configuring Logon Groups Using Configuration Files
Which of the above would be a better option for ABAP+JAVA system?
Has anyone implemented this before? If yes, can you share your experiences/lessons learned??
Thanks.
Fahad

1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME

Java System Copy tool

Hi,
We have an ECC6 on NW 7 landscape and require a tool to copy system data across 2 SAP systems. I have come across this Java System Copy Tool. I have downloaded the packages:-
Time analyzer
Package Splitter
Migration monitor
OraBRcopy
read the various documents that came with it and i just wanted to know that does this need to be run with SAPinst or can these need to be run individually? seems a bit confusing as there is no a straight forward document to read. I have read the Oracle Parameters that need to be set so that is one thing to discuss with my team.
We have a very big database and i wanted to ask if someone out there has used this that how long did it take migrating your database and under what conditions i.e. was database shutdown, done when system least used, etc?
It seems that Migration Monitor does the job of exporting and importing the packages but i am not sure how Package splitter or time analyzer fits into this?
OraBRcopy is the same as using R3COPY so that is no problem for me but just these inidividual tools i need help understanding.
Your help would be very much appreciated.
Thanks
Mani

> We use the database copy procedure and apply redo logs after to a level the apps poeple want it, but recovery takes a long time and it requires lengthy file checks as some are missing so we were investigating alternative methods available one of which was this SAP tool.
You never do full backups?
> My understanding of what you are saying and please correct me if i am wrong.. is that sapinst can copy either java content (assume you mean the java database schema??) or ABAP schema or both. export the java contents and continue using the normal database copy/redo logs method?
Yes. You would
- take a backup of the source database
- execute "sapinst", select system copy and select, that you're doing a "backup/restore" procedure
- sapinst will put all the Java parts together and create a dump of it
- you start sapinst on the target system, select system copy and that you're doing a "backup/restore" procedure
- sapinst will install SCS/CI and stop then asking you to recover the database
- sapinst will continue and setup the Java part
What you encounter is one of the major drawbacks when using DualStack instances. I would, if it's possible, separate the two instances so you can copy them independently of each other.
Markus

In ABAP+Java system installation

Hi,
I installed ABAP+Java system On that i installed XI 3.0 SR1.I after applying the J2EERTOS11_0-20000118.SAR patch on J2EE engine.This patch consist of lot of bugs.I just stopped the installation of patch.After again when i log on to J2EE engine with port 50000.Its showing no page dispaly on localhost.I checked the J2EE instance.J2EE instance running properly.Even i can't log in to SDM and J2EE administartor.
Before patching I can able to log in.But now its loging failing.
May be the error is at 50000 port.I installed everything on one Central instance.
Need urgent reply.

Hello,
i think that you want to patch your j2ee-server. Therefore you have to download four parts for PATCH SP11.
Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER SAP NETWEAVER 04 > Java Server:
J2EERT11_0-10001982.SAR (Part 4/4)
SAPINST10_0-20000118.SAR
J2EERTOS11_0-20000118.SAR
CTRL<database>11_0-20000118.sar
You have to download all these files and extract then in one folder - there you have to use the sapinst and install the patch.
I hope i understood your requirement the right way.
Regards,
Andr'e

System Start up issue in my ABAP + JAVA system

HI,
when i try to start up my SAP (ABAP+JAVA) system, server processes fail to start. Below is the trace file.
Though it says missing file jvmx.jar, not sure if this is the reason for the start up issue.
Thanks to check and assist.
trc file: "D:\usr\sap\P1D\DVEBMGS00\work\dev_server1", trc level: 1, release: "700"
node name   : ID3944951
pid         : 7752
system name : P1D
system nr. : 00
started at : Wed May 05 13:27:07 2010
arguments   :
   arg[00] : D:\usr\sap\P1D\DVEBMGS00\exe\jlaunch.exe
   arg[01] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[02] : -DSAPINFO=P1D_00_server
   arg[03] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[04] : -DSAPSTART=1
   arg[05] : -DCONNECT_PORT=1243
   arg[06] : -DSAPSYSTEM=00
   arg[07] : -DSAPSYSTEMNAME=P1D
   arg[08] : -DSAPMYNAME=blrkec115278d_P1D_00
   arg[09] : -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[10] : -DFRFC_FALLBACK=ON
   arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 7756] Wed May 05 13:27:07 2010
[Thr 7756] *** WARNING => INFO: Unknown property [instance.box.number=P1DDVEBMGS00blrkec115278d] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.host=blrkec115278d] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host    : blrkec115278d
-> ms port    : 3901
-> OS libs    : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : blrkec115278d
-> ms port    : 3901
-> os libs    : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3944900 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3944950 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [03] bootstrap_ID3944951 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3944900            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID3944950            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] ID3944951            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 7756] JLaunchRequestQueueInit: create named pipe for ipc [Thr 7756] JLaunchRequestQueueInit: create pipe listener thread [Thr 7776] WaitSyncSemThread: Thread 7776 started as semaphore monitor thread.
[Thr 7764] JLaunchRequestFunc: Thread 7764 started as listener thread for np messages.
[Thr 7756] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202) [Thr 7756] CPIC (version=700.2005.12.02)
[Thr 7756] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx1024m [jstartxx.c   2604]
[Thr 7756] [Node: server1] java home is set by profile parameter Java Home: C:\j2sdk1.4.2_21 [Thr 7756] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID3944951]
-> node name          : server1
-> node type          : server
-> node execute       : yes
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_21
-> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=160m -XX:MaxNewSize=160m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC
-> java vm version    : 1.4.2_21-b03
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 1024M
-> init heap size     : 1024M
-> root path          : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\server1
-> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path       : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50026
-> shutdown timeout   : 120000
[Thr 7756] JLaunchISetDebugMode: set debug mode [no] [Thr 7792] JLaunchIStartFunc: Thread 7792 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server1]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]:
-> -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonP
-> roxy arg[ 7]:
-> -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.Por
-> tableRemoteObjectProxy arg[ 8]:
-> -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=256m
-> arg[ 12]: -XX:MaxPermSize=256m
-> arg[ 13]: -XX:NewSize=160m
-> arg[ 14]: -XX:MaxNewSize=160m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1 arg[ 20]:
-> -Dsun.io.useCanonCaches=false arg[ 21]: -Djava.awt.headless=true arg[
-> 22]: -XX:+UseParNewGC arg[ 23]:
-> -Dsys.global.dir=D:\usr\sap\P1D\SYS\global
-> arg[ 24]: -Dapplication.home=D:\usr\sap\P1D\DVEBMGS00\exe
-> arg[ 25]: -Djava.class.path=D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 26]:
-> -Djava.library.path=C:\j2sdk1.4.2_21\jre\bin\server;C:\j2sdk1.4.2_21\
-> jre\bin;C:\j2sdk1.4.2_21\bin;D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs;D:
-> \oracle\product\10.2.0\db_1\bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYS
-> ROOT\System32\Wbem;C:\Program
-> Files\CA\SharedComponents\ScanEngine;C:\Program
-> Files\CA\SharedComponents\CAUpdate\;C:\Program
-> Files\CA\SharedComponents\ThirdParty\;C:\Program
-> Files\CA\SharedComponents\SubscriptionLicense\;C:\Program
-> Files\CA\eTrustITM;C:\Program Files\Windows
-> Imaging\;D:\usr\sap\P1D\SYS\exe\uc\NTI386
-> arg[ 27]: -Dmemory.manager=1024M
-> arg[ 28]: -Xmx1024M
-> arg[ 29]: -Xms1024M
-> arg[ 30]: -DLoadBalanceRestricted=no
-> arg[ 31]: -Djstartup.mode=JCONTROL
-> arg[ 32]: -Djstartup.ownProcessId=7752 arg[ 33]:
-> -Djstartup.ownHardwareId=N1596875852
-> arg[ 34]: -Djstartup.whoami=server
-> arg[ 35]: -Djstartup.debuggable=no
-> arg[ 36]: -DSAPINFO=P1D_00_server
-> arg[ 37]: -DSAPSTART=1
-> arg[ 38]: -DCONNECT_PORT=1243
-> arg[ 39]: -DSAPSYSTEM=00
-> arg[ 40]: -DSAPSYSTEMNAME=P1D
-> arg[ 41]: -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 42]:
-> -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
-> arg[ 43]: -DFRFC_FALLBACK=ON
-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost arg[ 45]: -DSAPSTARTUP=1
-> arg[ 46]: -DSAPSYSTEM=00 arg[ 47]: -DSAPSYSTEMNAME=P1D arg[ 48]:
-> -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 49]: -DSAPDBHOST=blrkec115278d
-> arg[ 50]: -Dj2ee.dbhost=blrkec115278d
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType loadInto [Thr 7792] JHVMLoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server1]
[Thr 7872] Wed May 05 13:27:08 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 7872] Wed May 05 13:27:09 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 7872] JLaunchISetClusterId: set cluster id 3944951 [Thr 7872] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)] [Thr 7872] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Wed May 05 13:27:13 2010
5.640: [ParNew 81920K->5980K(1007616K), 0.0258446 secs]
Wed May 05 13:27:17 2010
9.773: [ParNew 87893K->13835K(1007616K), 0.0529425 secs]
Wed May 05 13:27:21 2010
13.293: [ParNew 95755K->17179K(1007616K), 0.0572638 secs]
Wed May 05 13:27:23 2010
15.634: [ParNew 99099K->17958K(1007616K), 0.0419008 secs]
[Thr 6392] Wed May 05 13:27:26 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver [Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6392] Wed May 05 13:27:29 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 7804] Wed May 05 13:27:33 2010
[Thr 7804] JLaunchIExitJava: exit hook is called (rc = -11113) [Thr 7804] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 7804] JLaunchCloseProgram: good bye (exitcode = -11113)

Have you changed your java administrator password recently? If so, have you changed it in the configtool as well?
Kind regards,
Mark

Java system copy problems with the Java Migration Toolkit

During the JAVA system copy, we have have got the error in second last
step i.e;Java Migration Toolkit. We tried to do the system copy twice
but every time we have got the below error.
Is this a know bug? I have got the OSS note 966752 but the value
of 'src.ci.host' is already correct. has anybody come across the similar issue. please help.
" CJSlibModule::writeInfo_impl()
Output of /usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties is written to the
logfile /home/cmtadm/CI_Import_08312009/runJmt.log.
WARNING 2009-09-01 20:49:43.473
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/java14_64/bin/java -
classpath /usr/sap/CMT/SYS/global/sltools/sharedlib/launcher.jar:. -Xj9
com.sap.engine.offline.OfflineToolStart
com.sap.sdt.jmt.migrationtool.MigrationToolImport /usr/sap/CMT/SYS/global/sltools/jmt:/usr/sap/CMT/SYS/global/sltools/sharedlib import.switch
resume downtime mti.properties" finished with return code 27. Output:
ERROR 2009-09-01 20:49:43.477
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.479
CJSlibModule::writeError_impl()
CJS-20068 Error when running the J2EE Migration Toolkit.<br>SOLUTION:
See output of logfile /home/cmtadm/CI_Import_08312009/runJmt.log: ''.
ERROR 2009-09-01 20:49:43.480 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step RunMigrationController with step key
|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind|ind|ind|2|0|RunMigrationController was executed with status ERROR ."
There is no log file by the name runJmt.log.
Regards,
Sagar

This issue was resolved by OSS note 966752 itself. Below is the important line in the OSS note.
Note: The default value is crucial! If a custom value other than the default value was applied, we highly recommend that you restore the default value.
Thanks,
Sagar

ABAP + JAVA system copy

Similar Messages

Maybe you are looking for