Abap program to find the list of reports in complete

I know we can get from sap easy access in
information system but that is not all reports as I always find some report
which is not listed there so we want to freeze the list and we want to know
if we have any abap program If  u can send me the code or any standard
program that find and list the reports
soniya

Check the table TRDIR and write the select statements to display.
Check the fm  :F4_PROGRAM:  code.
Message was edited by: Eswar Kanakanti

Similar Messages

  • Abap program to find the list of SAP STANDARD reports in complete

    Please send me if you have any program since when i run TRDIRT Table in se16 it gives all the program now how to distinguish by business area like sd mm fi its tedious to open every program and check what it is . is there any ABap program that put together the list of all the reports for FI, AP, AR and MM
    Soniya Kapoor

    Hi,
      IN the table TRDIR give the application (TRDIR-APPL) and check the results..
    Cross-Application            
    A Asset Accounting             
    B Business Information Warehouse
    C PPC                          
    D DASS (control station)       
    E RIVA                         
    F Financial accounting         
    G General ledger               
    H Personnel Planning           
    I Plant maintenance            
    J Publishing                   
    K Cost accounting              
    L Inventory management         
    M Materials management         
    N Hospital                     
    P Human Resources              
    Q QSS (Quality assurance)      
    R Unknown application          
    S Basis                        
    U Enterprise Data Model        
    V Sales                        
    W MMS (Merchandise mgt. system)
    Y Customer head office         
    Z Customer branch              
    Thanks,
    Naren

  • How to find the list of all tables populated

    How to find the list of tables populated in the implentation of a particular company. DD02L contains all the tables SAP having. But i want only which are configured for a particular company.
    Also how to find the list of reports used by all users in a particular company. TSTC contains all transactions. But i require only reports used by a particular company.

    Hi Mohamed
    You use Solution Manager to do the comparison for you.  There are some nice features that will highlight all your customised coding.  Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
    Rgards
    Carl.

  • Want to find the list of Thermal Printer pass the MFI program!

    Want to find the list of Thermal Printer pass the MFI program!
    Did Apple have any list list out  the Device which pass the MFI program? I want to find some Thermal Printer pass MFI.
    Thank you very much!!!^^

    Must be a fairly short list - world's first reportedly released just 8 weeks ago...
    GeBE-FLASH® for iOS: Thermal Printer Innovation for iPhone, iPod ...

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

  • Where do I find the list that loads the programs at start-up so that I can disable some.

    Where do I find the list that controls the program loading at start-up. Also how do I know which ones I can disable. I am trying to speed up the start-up process.

    See http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autotruns

  • Standard report Programs to find the current status of workflows

    Hi Experts,
                       Are there any Standard report Programs to find the current status of workflows or workflows which are pending.
    Regards,
    Hari

    Go to SWI1 t-code
    Give the appropriate Status - Ready or Inprocess or Waiting
    Input the Task - either WF Template or Standard Task.
    Choose the time period and execute the report.
    Regards,
    PR.

  • Report program to find the configuration parameters of the system?

    Hi,
    Is there any standard program in SAP to find out the configuration parameters or the configuration settings of the system and any program to find the configuration settings across systems?
    thanks & regards,
    siddhartha.
    P.S : Points will be rewarded.

    Can you concretize your question ? For what purposes ? The "system" is the front-end or server where sap are installed? Chek the RZ20 and ST06. Regards.

  • How can we find the list of user exits for a transaction

    hi all
    iam new in user exits please send the basic details
    how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
    regards
    jagadish

    hi,
    check the below links for userexits
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    FAQ's
    http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    1. what is the defference between enhancement and user-exits?
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Re: difference between user exits & customer exits
    Some Questions ! Plz help...
    http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
    2. Difference between CMOD and SMOD?
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
    check these links..
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    passing selet-option variable to subrouine...
    Finding the user-exits of a SAP transaction code
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com/*
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    if u want to find the function exit
    then check the below code
    REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    1. in se11, goto table MODSAP
    View table contents
    2. in Type field, enter 'E' (for function exit)
    3. For that tcode, u should know the program name.
    eg. SAPLLMOB
    4. then type SAPLLMOB and execute
    or
    REPORT z34331_user_exit .
    TABLES : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    START-OF-SELECTION.
    Validate Transaction Code
    SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir
    WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir
    WHERE funcname = tfdir-funcname.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name = enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    Find SAP Modifactions
    SELECT * FROM tadir
    INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Regards,
    Naveen

  • How to find the list of users loggin through HTTP session

    Hi All,
    we are using SRM 5.5 system with ITS. I am able to find the list of concurrent users from ABAP level using report "CCUEVAL" but how do I know the list of concurrent users logged in from HTTP session?.
    could you please let us know the SAP note number or any report?
    Thanks in advance,
    Mohan Karri

    Hi Uday,
    thank you very much for your prompt response.
    I need a report because by end of every month I would need the average peak http users list for the reporting month.
    or tell me how to find " how many users logged in through HTTP session in a day?"
    Thanks
    Mohan

  • How to find the list of queries containing a Particular Infoobject

    Hi all,
    I have requirement to find the list of queries and workbooks which contains a Particular Infoobject. Please advice is there any Database table or Programs exists to find..
    Thanks in advance
    GAMY..

    Hi,
    Thanks for your replies.
    I have tried the oprion already..(RSD1 > Type in the name of the InfoObject and from the menu Edit > choose Where Used list.) but no use. It doesn't show the list of queires..It shows only the data targets.
    I would like to know is there any table to achieve the requirement.
    Thanks in advance
    Ganesh(GAMY)

  • How can I find the source of report in the executable method= "Spawned" ?

    Dear all:
    how can I find the source of report in the executable method=>"Spawned" ?
    Regards,

    Hi,
    Please see this thread.
    To View Spawned Concurrent Program Source Code
    To View Spawned Concurrent Program Source Code
    Regards,
    Hussein

  • To find the list of Inactive objects in the Production system.

    Hi Experts,
      Need a help. I want to find the List of inactive objects in the Production system. Do we have any standard program or any transcation code to find.
    Appreciate your help.
    Thanks,
    Venkata.A

    Check below threads -
    Check Inactive Objects in System
    Need program to find the inactive objects
    Tcode for finding out the inactive BI Objects

  • Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

    Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

    Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

  • How to find the list of existing tables in a schema using DB link?

    Hi
    I know how to find the list of existing tables in a schema using the following query
    SQL> select * from tab;
    but, how to list the tables using a DB link?
    For Example
    SQL> select * from tab@dblink_name;
    why this doesn't work?
    Pl advice me
    Thanks
    Reddy.

    ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
    The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

Maybe you are looking for