ABAP proxy delete reganarate

Hi Gurus,
Can anyone help me in knowing the difference between Regenating an ABAP proxy and Delete-Generate ABAP proxy if datatype/messagetype is changed in the Integration Repository
Thanks
Keerthi

Hi Keerthika,
-->In SPROXY if you generate the Proxy on your Interfaces and if you want to delete the Generated Proxy we can delete it.This is Delete generated proxy.
-->Regeneration of Proxy is nothing but,after generation of Proxy in your SPPROXY on the interface,If any changes made to the Data types or message types or message interfaces,you need to regenerate the proxy to occur the changes in your Proxy .
Thanks

Similar Messages

BPM file to ABAP proxy

HI all
I´m developing a BPM, this has the following steps:
1º
Reciver Step: this is to read a file , comunication channel type file.
2º transformation Step: maps the MT of the file to a new MT
3º Send step: send syncronously the result of the the map.Using an ABAP proxy. XI adapter.
4ºSwitch step: compares de the value of the result of the syncronous call, with a constant.First branch Send Step to write a file
Second branch nothing.
My question is? Do i have to insert something before the switch. Because i cannot activate the BPM, In the SXI_CACHE i can see and error that says that the value that i´m using to compare the value it is not an object of the payload.
Any idea?
Many thanks
Noelia

Hi,
Last try...
salida_proxy./p1:MT_salidaproxy/row/valor = 0
In the condition editor:
When you do a f4 for the left operanfd text box:
The expression editor opens:
You need to click on the "Interface Variable" radio button and select your container salida_proxy and prove the correct xpath.
Make sure that the Type specified next to the xpath in the expression editor is String.
A f4 in the right operand text box opens a expression ediote, where:
You need to click on the constant radio button, and provide the constant 0.
Again make sure that the xsd trype is String.
In case all this has been done perfectly, then try deleting the switch and recreating it again. You never know, this might do the trick!
Regards,
Smitha.
Message was edited by:
Smitha Rao

How to change the PREFIX of a ABAP proxy in SPROXY transaction?

Hi Experts,
I created a ABAP proxy by right clicking (CREATE PROXY) the Service Interface in SPROXY transaction.
At the time, I have given ZMY_XI_ as a prefix in the box of PROXY of tab of properties, fine. Now I need to change the PREFIX, so, clicked the pencil button and changed and trying to SAVE or ACTIVATE, but am getting message saying that "Name must begin with YXI_II"
Pls. let me know that even though SAP has given this field as editable field (on clicking the pencil button), why still am getting this error?
How to get my requirement to be done?
Thank you

Howdy,
You have to delete the proxy (save any code you've done first) and start again with the prefix you want - as all subobjects need to be generated with the same prefix.
Cheers
Alex

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

Handling Transport ack. in Abap Proxy to JDBC Scanario

HI all
I have a scanario where i have message which is being sent from an abap proxy to a SQL Server database using JDBC adapter. The scenario involves a BPM.While sending the message the message shows delivered in MDT (Message monitor for Adapter ) but the Business process is still executing and is waiting for the acknowledgement(transport) . Can anyone please tell me how do find where the exact prblem lies.And how do i delete these acknowledgements. Even though i deleted the work items the Ack Status column still shows "Still Awaiting Acknowledgement"
regards
Nilesh Taunk

Hi,
As metioned check the Send Step Properties ( mode etc)..
After changing activate the BPM and refersh the cache in SXI_CACHE and test the scenario.
also check the BPM technical details. For this go to SXMB_MONI>PE>Technical Details so that you can find the logs in the monitor.
Regards,
Moorthy

ABAP proxy class - data structure

I generated a ABAP Proxy Class and the data structure I want to use is put automatically under item structure which has 0...unbounded type.
1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
2. If my source structure has only 3 level, and the target structure has more than 3 (including item), how to map it?
e.g.
Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
I need to map level 3 from my source to level 4 in target, but it didn't seem to work.
Thanks.

--->1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
You can delete the proxy at Application Server.....make necessary changes at XI Message Interface and again generate the proxy...
-->Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
For this you need to make use of context change features of XI Mapping.
Regards,

Problem in ABAP proxy

hai all,
iam doing a abap proxy scenario in the following flow.
Flow: XI (Client 800) -
> XI (Client 001) ---> XI (Client 800)
now when iam trying to send the data from 800 client to 001 client
in 001 client sxmb_moni
it is giving one error
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>mi_flietdata_OA</SAP:P2>
<SAP:P3>urn:proxytoproxy</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message mi_flietdata_OA, request message, namespace urn:proxytoproxy)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
can any one solve this problem.
regards,
Madhav Poosarla.

hai sumit,
i have generated proxy object as a local object,
previously i have created 4 levels of package
Structure Package(ZXI_PACKAGE)----
Level1
     Main Package(ZSCSLSAP)----
Level2
                    Sub Package(ZSIVA_SCSLCOMP)----
Level3
                   SubPackage   (ZSIVA_SCSLCOMP_PROXY2PROXY)--Level4
and i have added SAI_TOOLS to
ZSIVA_SCSLCOMP_PROXY2PROXY sub package,
at that time i have tried to add SAI_TOOLS to ZXI_PACKAGE but it was not allowed.
now i will create one more package hirachy and and i will try to execute again.
now i will delete my outbound proxy and will generate it again.
yes, mi_flietdata_OA is outbound interface.
thanks & regards,
Madhav Poosarla.

ABAP Proxy To XI

Hi All,
I hope i can get an answer to lingering problem that we have currently.
We manage to configure to have XI --> ECC 5.0 (through Proxy / XI Adapter)
We have another scenario where we are using ECC 5.0 through ABAP proxy to send messages to XI. However, we are facing the following error message :
<SAP:Code area="INTERNAL">DESTINATION_NOT_FOUND</SAP:Code>
<SAP:Stack>HTTP Destination_Receiver missing (system , transaction SM59)</SAP:Stack>
1. SM59 ECC --> XI HTTP Connection Test is Ok
2. SCIF T-Code. XI services all activated
3. SM59 XI --> ECC HTTP connection test was ok
4. XI --> ECC (via XI Adapter Scenario --This is ok)
5. SM59 - Deleted and recreate the connection
6. Regeneration of the Message Interface in ECC
Thank you
Sulaiman

hi asari,
ABAP proxy objects can only be generated for SAP systems that are based on SAP Web Application Server 6.40.
The proxy generation retrieves the WSDL description of the interface from the Integration Repository using HTTP. The address of the appropriate server is taken from the exchange profile (parameters 1, 2, and 3 u2013 see below). Queries to the Repository are subject to authentication. The user and password for these queries are also taken from here (parameters 5 and 6). Information used to navigate from the ABAP Proxy Generation to the initial page of the Integration Builder is also taken from the exchange profile (parameters 1, 2, and 4).
Example configuration for accessing
interfaces in the Integration Repository (exchange profile)
check link
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
reward points if helpfull
regards
kummari

ABAP Proxy HTTP response contains status code 401

We have a client ABAP proxy running in a program successfully in our development system. Today I transported this to our Test system. When I tested, there were no messages in the adapter engine pipeline.
One of my colleagues discovered that when running SXMB_MONI on the Application system (_not_ the XI system), the XML queue there shows the message with an error, the error being:
HTTP response contains status code 401 with the description Unauthorized
I have looked at quite a few posts here with this error; the PIAPPLUSER is not locked, Integration engine is configured the same way in both Development and Test, but I cannot figure out why this is happening.
Any assistance more than welcome!
BR,
Tony.

hi,
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Thanks
Swarup

Issue with ABAP Proxy

Hi,
My scenario is SAP(ABAP Proxy) - XI - Web service. I can not see any messages in XI when I run the Proxy program, when I check for the outbound messages from SXMB_MONI in SAP system the message status is "Scheduled" and Q.Status shows "Message waiting in Queue" . What could be the message status if the outbound proxy is successful?
Can someone let me know what could be the problem and where I can check for entire scenario for these problesm?
Thanks
Suresh

Hi,
If this is not a Production System means,
goto SMQ2 and delete all the Strucked Messages in all the Queues.
And now goto SMQR say De-Register Queueus and
goto SXMB_ADM--Manage Queues--Just say Register Queues
Now Trigger your Report Program to send the data to XI.
Check in R/3 side as well as in Xi side also in the T-code SXMB_MONI for Successfully processed messages.
REgards
Seshagiri

Error while activating ABAP proxy object

Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
Sharada

Hi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub

Activate abap proxy withou java stack on ECC side

Hi gurus,
Can we activate abap proxy on ECC side if the ECC don't hava java stack? As you know , we need to create two jco RFC provider in Visual Administrator, but without installing java stack, we can't do that. Any ideas? Thanks in advance.

Thanks all.
Solved by using program id of XI system in the RFC of application system.
But we still face the issue in SPROXY. It gave the error "No connection to Integration Builder ".
Then I runned connection test, and found SPROX_CHECK_IFR_ADDRESS and SPROX_CHECK_HTTP_COMMUNICATION
are right, but SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are giving the error "Integration Builder data not understood". Any ideas?
Edited by: xinjiang li on Sep 10, 2010 6:40 PM

SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

Hi Everyone,
I am developing the following scenario:
3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
ESR
1. Message Types
     SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
2. Message Mappings
     MM_REQUEST    which maps MT_SOAP_REQ   to MT_PRXY_REQ)
     MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
3. Service Interfaces (Synchronous)
    (SOAP Request)
    SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
   (Proxy Response)
    SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response = MT_PRXY_RESP
4. Operation Mapping
    OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ to MT_PRXY_REQ)
                                                                    and Response (MT_SOAP_RESP to MT_PRXY_RESP)
I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
ID
In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP. For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend. I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI) . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
I appreciate you taking the time to go through this . Any help is greatly appreciated.
Thanks very much
Gary

I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
>>>>No need to do anything in SOAMANAGER
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
>>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
>>>>Your receiver determination and interface determination takes care of this.(receiver interface & outbound processing tabs in ICo)

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

ABAP proxy delete reganarate

Similar Messages

Maybe you are looking for