ABAP proxy in Block step in BPM

Hi Experts,
Can ABAP server proxy be used in the block step of BPM?
Proxy cannot be generated using Abstract interfaces right?
Thanks
Suma S

Hi Suma,
Check the below links :-
As far as my knowledge, you cannot use ABAP proxies in the block step.However, you can cross check it.
Yes, you are right . You cannot create proxies from abstract interfaces.
Check the below links. These will help u in better understanding :-
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
bpm send abap proxy problem
Re: what is a block step where it is used
What is the use of block step in BPM? Please help!
Regards,
Rohit

Similar Messages

What is the use of block step in BPM? Please help!

Hi Experts,
I would like to know what is the use of block step in BPM? In what cases we can use it?
Can somebody explain BLOCK by relating to any programming language ( java) control step?
Please help!
Thanks
Gopal

Hi,
Block step is similar to what we use curly braces in most of the languages which defines the scope. For example if we are using loop step in bpm to loop through some variable then we can use block step to restrict the scope of loop step up to some point.
Thanks and Regards,
Sudheer.

ParforEach Mode in Block Step in BPM

Hi All,
We designed a BPM with a block step in Parforeach mode.
For this block step, a multiline container is the Input.It has all the messages to be processed in parallel. But during runtime this block step is not processed in parallel mode.The messages are processed one after the other in sequential mode.Only different instances of the block step are generated but they are processed sequentially.
Any suggestions!!!
Regards,
Srinivas.

Hello,
You could read here:
http://help.sap.com/saphelp_nw04s/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/frameset.htm
that:
A ParForEach is not a means of improving performance. A ParForEach will not result in a split into threads.
Could this be the reason?
Regards
Patrick

Block step in BPM

Hi Experts,
I am facing a problem in BPM,
1) Receive the Message
2) Split the Message
3) Block starts
    a) Synchronous send to RFC
    b)Response from this is send to Send step
In this scenario, the Message is going upto "BLOCK" step, and from there it is not geting executed correctly. To my surprise in SXMB_MONI, the message going to BPM succesfully and no other message found from BPM to any system(either synchronous send / send).
Can you please help me in identifying the problem.
Regards,
Anudeep

Hi,
Problem is solved.
Multi mapping is not giving target element. It is solved when we chnaged the input payload format, from,
<ns1:Sender_SI xmlns:ns1="namespace">
<rows>
     <field1>
     <field2>
</rows>
</ns1:Sender_SI>
to
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Sender_SI xmlns:ns1="namespace">
<rows>
     <field1>
     <field2>
</rows>
</ns0:Sender_SI>
By this change the Mapping worked and scenario is running succesfully.

Error in Block step in BPM.

Hi all,
I am getting the error in block step, my design follows like this i defined one transformation before block step, the transformation step will splits the input bunch of records into equal no of record packets and sent to block step.. while defining block step i used foreach mode, in block step we kept one sync send step which will send message and gets response ....
but my block step is getting error once message enters into the block...
Thanks in advance for your valuable suggestions and solutions...
Srinivas

Hello...
>>the transformation step will splits the input bunch of records into equal no of record packets and sent to block step
The transformation splits the message into bunch.. Put the output in a multiline container and use this in the block step...
>>but my block step is getting error once message enters into the block...
What error are you getting??
>>Thanks in advance for your valuable suggestions and solutions...
Great to know that you are happy with the responses from the community member in this forum.. So I wish to point one more thing here.. Some of the recent threads closed by you were having closing comment as solved.. it will be better if you point out the problem and the solution which you have adopted to solve the same, so that other community member having the same problem will get a speedy solution... This is just a suggetsion from my end...
Thanks
Suraj

ABAP Proxy - Error situation

I am developing inbound ABAP proxy. Using fault message and raise exception, I can safely fail the ABAP proxy without blocking the queues.
If I want to configure ALERT message to be sent to a email id in this scenario, how do I achieve this? Can this be done using Alert configuration? or do we need to use BPM? IF BPM is the only alternative, can anybody indicate the BPM steps?

Hi,
if you want to raise an alert from BPM
have a look at my weblog:
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
but if you want to send a mail from BPM
use mail adapter then you'll be able to
configure it very easily (even html mails):
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
- if you want you can also send mail from SAP
(when you catch the exception)
- you can also catch the excetpiton and
send the error to the XI and use the mail adapter from
there - without the BPM
there are many possibilities:)
Regards,
michal

Purpose of having a block in the BPM

whats the purpose of having a block in the BPM, and what does its attributes
BLOCK-Start and BLOCK-end with values "new transaction"/"no new transaction" means

Hi
pls check
What is the use of block step in BPM? Please help!
Regards,
Ram

Interface ABAP Proxy - File - Synchronous - (Is it possible???)

Hi Experts,
I want execute ABAP Proxy which will create File in FTP. On final, i need return "OK" information to the ABAP Proxy.
Is it possible? ABAP Proxy <-> File Synchronous? Without BPM and Custom Module Adapter. Just using RequestResponseBean???
Tks in advance.

Hi Raj,
Tks. I implemented the Acknowledgements Request and changed the ABAP Proxy to Async. But the Ack returns to the ECC with the error and is not saved in the Message. The error follows below:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">REQUEST_MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1>4EE24DEB4EA60650E10080000A09071E</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Requisição mensagem 4EE24DEB4EA60650E10080000A09071E pipeline CENTRAL versão desconhecida</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any Idea about this error?
Tks in advance.

JDBC to ABAP PROXY ASYNCHRONOUS SENARIO

Hi Experts
JDBC to ABAP PROXY ASYNCHRONOUS SENARIO IN PI 7.4 ?
Can you tell me any one step by step procedure
BR,
Sagar

Hi Sagar
Check the documents below and you will be able to create the whole scenario.
JDBC sender part:
SAP PI Adapter Series: JDBC Adapter Configuration
ABAP proxy receiver part:
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki

Handle attachements in abap proxy

the like lets about sending the message as an attachment, can u help me out, after receiving an attachment in abap proxy, what are steps need to be done in abap proxy.
is there necessary that the receiver transport protocol should be HTTPS 1.0

Hi,
[SAP Help Proxy Programming: Attachments|http://help.sap.com/saphelp_nw2004s/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm]
Regards,
Udo

Trigger BPM without Abap Proxy

Hi there,
my scenario:
BPM (XI)-> JDBC -> IDOC
is it possible to fire an event on the intergration server for starting the xi bpm ?
abap proxy is not the solution because my webas is only configured as an integration server.
thanks
sebastian

Hi,
is it possible to trigger the bpm with a async message ?
rfc is a sync call. because some async steps (idoc, aleaud) in the bpm a rfc call
as trigger would block a dialog process at the appl server for a several time.
sebastian

BPM file to ABAP proxy

HI all
I´m developing a BPM, this has the following steps:
1º
Reciver Step: this is to read a file , comunication channel type file.
2º transformation Step: maps the MT of the file to a new MT
3º Send step: send syncronously the result of the the map.Using an ABAP proxy. XI adapter.
4ºSwitch step: compares de the value of the result of the syncronous call, with a constant.First branch Send Step to write a file
Second branch nothing.
My question is? Do i have to insert something before the switch. Because i cannot activate the BPM, In the SXI_CACHE i can see and error that says that the value that i´m using to compare the value it is not an object of the payload.
Any idea?
Many thanks
Noelia

Hi,
Last try...
salida_proxy./p1:MT_salidaproxy/row/valor = 0
In the condition editor:
When you do a f4 for the left operanfd text box:
The expression editor opens:
You need to click on the "Interface Variable" radio button and select your container salida_proxy and prove the correct xpath.
Make sure that the Type specified next to the xpath in the expression editor is String.
A f4 in the right operand text box opens a expression ediote, where:
You need to click on the constant radio button, and provide the constant 0.
Again make sure that the xsd trype is String.
In case all this has been done perfectly, then try deleting the switch and recreating it again. You never know, this might do the trick!
Regards,
Smitha.
Message was edited by:
Smitha Rao

Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

Build delay in messages to abap proxy without BPM / mapping

Hi everyone,
The abap proxy is receiving messages from PI, is having errors when receiving big loads of messages via PI.
The proxy lock's a table causing the next message to run in error.
The interface is not using BPM or a mapping.
My question is:
What are the possibilities to configure a delay in PI ? (not using a mapping or BPM process)
The abap proxy need some time to process a message before it receives the next one.
Br,
Roy

Hi,
>>>The proxy lock's a table causing the next message to run in error.
if you use async messages with fault messages correcty you can
restart those abap proxies just like IDOCs - and you can schedulerestarting that too
so this is nothing bad - just schedule the restarting and they will get processed
Regards,
Michal Krawczyk

ABAP proxy in Block step in BPM

Similar Messages

Maybe you are looking for