ABAP Proxy to XI to webservice scenario

Dear all,
Can anyone guide me the steps required to configure this kind of scenario?
ABAP proxy sends some PO data thru SAP ECC system to XI . Then XI has to invoke some webservice of third party tool.
Can anyone provide me the detailed steps to configure this kind of scenario?
Thanks,
Sonal

Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Configure your WS
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
use those blogs to help configure the scenario.
Also do some search in SDN and you will surely get more links.

Similar Messages

Abap proxy client and https webservice

Hi, I have a problem with an abap proxy client.
This proxy works perfectyl when I call the test webservice (via HTTP protocol) but it does not work if I try to call the productive webservice (via HTTPS protocol). Of course I have configured LPCONFIG in order to let the proxy point to the correct web site.
I'm pretty sure that problkem is caused by different protocols HTTP vs HTTPS.
I thought the problem could be the web site certificate, so I added it into the PSE (transaction STRUST) but nothing happnes.
Your help is really appreciated.
Edited by: robcom69 on Feb 22, 2010 3:34 PM
Edited by: robcom69 on Feb 22, 2010 3:35 PM
Edited by: robcom69 on Feb 22, 2010 3:49 PM

I have loaded the certificate in the TRUST transaction.
Anyway, in our system we do not have the SAPCRIPTOLIB libraries and I do not underastand if they are necessary or not.
I mean, I need these libraries only if I expose an HTTPS server from SAP or even if SAP is the client and it need to access an external https webservice ?
Please help.

ABAP proxy call to eBay webservice

Hi,
I'm trying to configure an ABAP proxy call to the eBay SOAP web services using ECC6 (SP14).
Has anyone had any experience they can share on how to configure the security for the proxy endpoint in SOAMANAGER to use the ebay services?
Thanks
Tim

Hi,
Yes, we can do Sysnchronous call in Proxy.
and we can do the Background job schedule also in Proxy .
Reffer this help file
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Reffer this BLOG also
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 12, 2008 11:19 AM

ABAP Proxy synchronous call to webservices

Hi,
I have the following synchronous scenario.
SAP R/3 outbound proxy <-> SAP XI <--> Webservices.
When I try to execute the proxy Execute synchronous,I am getting the following exception caught.
CX_AI_SYSTEM_FAULT.
What could be the possible reason for the exception to be thrown?
Thanks,
Leo

Hi,
This exception is thrown when there is an error in XI in a sync call.
What does your message display show in SXMB_MONI in XI ?
Kind regards
Colin.

Invoking Webservice using ABAP Proxy

Hi,
I have a synchronous scenario with ABAP proxy invoking the external webservice.In the SOAP receiver target URL confiuration,do I need to give the operation(method)name in the webservice? I have read in the forum that we need to give the target URL with .asmx extension.What is the meaning of .asmx extension?
Thanks,
Leo

Hi Teresa,
We meet again !!
Right, we have a simple solution for this without using BPM.
In the proxy, set a field on the outbound data structure from the proxy to indicate to XI which receiver determination in XI can use to send the message to the right interface.
We have exactly the scenario you are talking about and it works like a treat.
Send me an e-mail @ [email protected] and I will send you a screenshot of how simple this is without using BPM.
Cheers
Colin.

How to make an ABAP Proxy public as an asynchronous WebService

Hello together,
i have made an ABAP-Proxy public as an WebService by generating the WSDL from the directory for my asynchronous outbound interface. This outbound interface is mapped to the ABAP-inbound interface and so on. This works fine.
But actually i don't need any mapping. So i'm thinking about to how to send the WebService directly and to the ABAP-Inbound-Interface asynchron.
1. Is this possible at all (and how), and if so
2. does it makes sense in order to improve the performace (there is a mass-processing in behind)?
Gunnar

Gunnar,
I guess its simple...go for SOAP to Proxy scenario.
If ur source and target structure is same ..u need not require mapping.u can execute the scenario without mapping also.
I have done same scenario 2 months ago.....
following things u need to do.
1)create outbound message interface
2)create inbound message interface
3)No need of message mapping and interface mapping(if u dont require any transformation of source structure)
4)create WSDL for outbound message interfce
5)create proxy for inbound MI
6)write the necessare code in ur proxy
7)using any SOAP editor like XML spy send data to proxy...
u have done the work!!!!
All the best
regards
biplab

Fault message in asynchronous ABAP Proxy

Hi,
I have a question about fault messages in asynchronous ABAP proxy server.
The configured scenario is SOAP XI ABAP Proxy. Between XI and the ABAP Proxy I have configured an inbound asynchronous interface with a fault message, and then I have generated all the classes and implemented some code for exception handling in the ABAP Proxy side successfully.
When I tested negative cases, the exception raises and it is visible in the SXMB_MONI transaction in the R/3 side, but this exception is not displayed in the SXMB_MONI of XI it just displays a successful delivery to the ABAP Proxy message.
According the XI documentation it says In the asynchronous case, you can see a fault message in the monitoring of the Exchange Infrastructure. But this is not working.
Am I missing something?

Hi,
This parameters are form group RUNTIME.
Please check it:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/49543b1e49bc1fe10000000a114084/content.htm
Regards,
Wojciech

SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

Hi Everyone,
I am developing the following scenario:
3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
ESR
1. Message Types
     SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
2. Message Mappings
     MM_REQUEST    which maps MT_SOAP_REQ   to MT_PRXY_REQ)
     MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
3. Service Interfaces (Synchronous)
    (SOAP Request)
    SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
   (Proxy Response)
    SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response = MT_PRXY_RESP
4. Operation Mapping
    OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ to MT_PRXY_REQ)
                                                                    and Response (MT_SOAP_RESP to MT_PRXY_RESP)
I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
ID
In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP. For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend. I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI) . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
I appreciate you taking the time to go through this . Any help is greatly appreciated.
Thanks very much
Gary

I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
>>>>No need to do anything in SOAMANAGER
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
>>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
>>>>Your receiver determination and interface determination takes care of this.(receiver interface & outbound processing tabs in ICo)

How to use a standard service available in SOAP to ABAP proxy scenario?

Hello Experts,
My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
I have seen a standard service available at the following URL.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
Can I use the above web service for my current scenario? If yes, please explain how?
Thanks & Regards
Nidhi

Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
The WS that you mentioned is inbound and hence wont suit your requirement!
The reverse flow may however be possible.
Create Sales Order_V2
synchronous inbound service operation
Regards,
Abhishek.

Error in synchronous( abap proxy to soap)scenario

Hi experts,
My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
configuration steps are
1. only client proxy to soap scenario I have done.
communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
Already we have RFC destination connection and connection type H for proxy to xi.
1.Is it required RFC destination connection for xi to server proxy.
2.Is it required receiver proxy communication channel for server proxy?.
i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
error is:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
Kindly help me.
advance thanks
thanks and regards
elton
Edited by: eltonsaranya on May 9, 2011 10:27 AM

Your exception message shows problem at the webservice side.
Check the following:
a) you need two mappings one for proxy req to soap request and other soap response to proxy response
b) You need to create service interfaces both sender and receiver synchronous .
c) communication channel QOS is best effort for both sender and receiver
d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
f) See your SOAP response structure matches with WSDL provided.
g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI for that web service. So that you know whether problem exists on the target system or not.
Hope that helps.

Synchronous scenario(ABAP proxy to HTTP_AAE) getting error exception as "Message Expired Exception"

Dear All,
I have done all the configuration for ABAP proxy scenario using AAE/ICO as per the below "how to guide" using SOAP as sender adapter using xi protocol. My SAP PI is 7.4 dual stack system. here third party is not a webservice its HTTP based we server so no wsdl.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
However after running the scenario from ECC I am getting the exception as "Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 53289257-97e0-06d0-e100-00000a70d384(OUTBOUND) expired.". I do not have any connection problem to third party(bank) URL. moreover I am able to get the response from bank using classical scenario s in PI, but the response message is not getting pushed to ECC, rather its reaming in PI SXMB_MONI with status "Log version".
Thats the reason I am trying to do using ICO, but using ICO PI is not even sending the request out of PI to bank. Please see the below receiver communication channel message log.
Thanks,
Farhan

Hi,
As per the log, the message has started 23:18:02 and failed at 23.23:02 it took 5min time, if message is not process certain time this kind of errors comes up. Have you changed adapter type for existing SOAP communication channel or created new? provide complete log of the message from starting time to ending time if possible.

Error while usinjg the JDBC to ABAP Proxy Scenario

Hello Rocks,
This is my scenario like JDBC --- Pi --- ABAP Proxy
while i am given a sender side jdbc XSD structure is like this
VWENTITYAGGREMENT
Row             1-unbound occurence
      POOL_ID   0-1 occurence
      CUST_ID
      AGREEMENT
       PRODUCT_ID
        CONTRACT_TYPE
        CONTRACT_TYPE_DESCR
        AGRMNT_STATUS
        STATUS_DESCR
          EFFDT
         TERMINATION_DT
         ADD_DT
         ADD_TM
while i am writing a select query in Sender JDBC CC is like this
SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement.
Here i am getting this Error message like this :
Error Description: Database-level error reported by JDBC driver while executing statement 'SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
So please give me your valuable inputs !
Regards,
Ravi.

Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
Did you confirmed the name POOL_ID as suggested?
Why is the tablename different (check the case) in the query that you make and in the XSD structure that you mentioned......check if this is causing the problem.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 4, 2010 10:24 AM

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Issue in Iodc- abap proxy scenario

Hi all
I have a idoc to abap proxy scenario. The issue is ,
when we send the idoc to client A of target system, it works ifne.
But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
Is it because of any error in XI configuration or somethin else.

hi all
thanks for all your responses.
I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
I gave the conditions in Receiver Determination.
Same Server Proxy is used in both the target business sytems.
I have done all the Configuration Steps ,( Created two separate business systems also )
Also I have checked wiht all the system settings to be made in the target system B.
When i trigger the idoc to Client 100, it goes to XI and then reaches Client 100 of System B
without any problem. I get the desired result from proxy code.
When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
the Call Inbound PRoxy step. (from sxmb_moni)
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

ABAP Proxy to XI to webservice scenario

Similar Messages

Maybe you are looking for