Abap testing tool

Is there any abap testing tool........

Hello RajKumar,
SAP has many ABAP testing tool.
Check from the link
http://help.sap.com/saphelp_nw04s/helpdata/en/10/6d1c370c468b7be10000009b38f936/frameset.htm
Here you go few tools
ABAP Debugger
Assertions and Breakpoints that Can Be Activated
Runtime Analysis
Performance Analysis
Coverage Analyzer
Runtime Monitor
Memory Inspector
Code Inspector
Global Performance Analysis
ABAP Unit
ECATT
Cheers
Jawahar Govindaraj

Similar Messages

OSDB Abap Testing

Hi all,
We are doing OSDB migration (Upgradation of operating system from HP UNIX to IBM and upgradation of the database from oracle 8x to Oracle 10). What kind of testing (ABAP side) we have to carry out after above migration.
Regards,

Hello RajKumar,
SAP has many ABAP testing tool.
Check from the link
http://help.sap.com/saphelp_nw04s/helpdata/en/10/6d1c370c468b7be10000009b38f936/frameset.htm
Here you go few tools
ABAP Debugger
Assertions and Breakpoints that Can Be Activated
Runtime Analysis
Performance Analysis
Coverage Analyzer
Runtime Monitor
Memory Inspector
Code Inspector
Global Performance Analysis
ABAP Unit
ECATT
Cheers
Jawahar Govindaraj

Is there a Message Test tool in XI WAS ABAP?

There's a message test tool in runtime work bench of WAS JAVA,
is there one in XI WAS ABAP so that I can send data to inbound message interface?
Thanks in advance.

Michal, I've refered to that blog, it is what I want.
Now I have one more quetion
I've just started to learn XI as well as SAP for several months, but truely I've already read a lot of articles written by you. Seems you always know some tricks inside SAP, but how can you always figure out a way to solve this kind of quetion? Like the use of cl_xms_main, from where you learned about it? from "F1" or somewhat else? That what I really want to know.
Can you tell me that?
B'Rgds,
YiNing

OpenSQL query testing tool

Hi,
I am looking for a simple tool that I can type in a sql query and then run the query. It would be nice if it can be like MS Access that you can switch between design view and SQL view - using design view to contruct the query and switch to SQL view so you can copy the SQL statement to the ABAP program.
So far the only thing I found is SQL Query Tool (t-code SQ01), but it's more a reporting tool than a query testing tool.
Please advise. Thanks,
Jack

Testing any product manually is the best testing pattern and about Rational ClearCase i dont believe that its a testing tool its one of the methodologies of Rational for team unification .... but there are quite a few products from rational like Rational Robot or Rational siteLoad which can be effectively used for testing

Forms and Reports: Automated Test tools - functionality AND performance

All,
I'm looking to get a few leads on an automated test tools that may be used to validate Oracle forms and reports (see my software configuration below). I'm looking for tools that can automate both functional tests and performance. By this I mean;
Functional Testing:
* Use of shortcut keys
* Navigation between fields
* Screen organisation (filed locations)
* Exercise forms validation (bad input values)
* Provide values to forms and simulate user commit, and go and verify database state is as expected
Performance Testing:
* carry out tests for fixed user load
* carry out tests for scaled step increase in user load
* automated collection of log files and metrics during test
So far I have:
http://www.neotys.com/
Thanks in advance for your response.
Mathew Butler
Configuration:
Red Hat Enterprise Linux x86-64 architecture v4.5 64 bit
Oracle Application Server 10.1.2.0.2 ( with patch 10.1.2.3 )
Oracle Developer Suite (Oracle Forms and Reports) V10.1.2.0.2 ( with patch 10.1.2.3 )
Oracle JInitiator 1.3.1.17 or later
Microsoft Internet Explorer 6

are there any tools for doing this activity like oracle recommended tools?
Your question is unclear. As IK mentioned, the only tool you need is a new version of Oracle Forms/Reports. Open your v10 modules in a v11 Builder and select Save. You now have a v11 module. Doing a "Compile All PL/SQL" before saving is a good idea, but not required. The Builders and utilites provided with the version 11 installation are the only supported tools for upgrading your application. If you are trying to do the conversion of many Forms files in a scripted manner, you can use the Forms compiler in a script. Generating new "X" files will also update the source modules (fmb, mmb, pll). See MyOracleSupport Note 955143.1
Also included in the installation in the Forms Migration Assistant. Although it is more useful to people coming from older versions, it can also be used to move from v10 to 11. It allows you to select more than one file at a time. Documentation for this utility can be found in the Forms Upgrade Guide.
Using the Oracle Forms Migration Assistant

What are the IEDriver version requirements for using Microsoft Webdriver tool with a selenium based test tool?

Hi,
We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11.
Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft webdriver tool.
I can see the driver IMPLEMENTATION set to VENDOR in the log, it also brings up the browser, but gets stuck there.Is this a known issue?ThanksTanvi

Selenium is a third party software, so it is not supported in MSDN forum. It would be better consult to selenium's office website or forum. Some placa like here:
http://www.seleniumhq.org/support/
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Are there any good black box testing tools for j2me?

Is there any good testing tools available for testing software on physical mobile devices?
I would like to partially replace manual testing with automated testing using a test tool. It should work on physical devices, and with the help of a script it should be possible to execute predefined sequences of button pressings on the device. Preferably there should also be some way of deciding whether the test was a succes without having to do so entirely manually.
The purpose with this would be to make it easier to go through the test protocols, which has to be done before every new software release.
Deviceanywhere.com looks promising at first glance but it is rather costly. Still, does anyone have an opinion of it?
Does anyone has experience of Mobile junit for this kind of testing? Is it possible to define series of physical button pressings with it? At first glance it doesn't seem so.

You can collect the Organizational Health in Exchange 2010 console for Exchange 2003/2007/2010 and that will list very useful information about statistics in your organization like servers, databases, CALs, recipient, feature used etc...
Collect Organizational Health Data -
http://technet.microsoft.com/en-us/library/dd351156%28v=exchg.141%29.aspx
However it doesn't contain any configuration information and that you need to collect it manually because that depends on needs of each organization and how they want to setup their infrastructure...

HTTP to File Scenario: execute Test Tool (html) but any received message?

Hi all,
I have configured the HTTP to File scenario in SAP XI 7.0. When i execute the Test Tool (HTTP_Client_Adapter.html), i don't see any message in the XI Server. I don't know the Test Tool which i used for the test work correctly, because when i clicked on 'Send' button, i don't get any message in the XI Server?
The Configuration Scenario is OK when executing the Configuration Test in ID.
Could you please tell me how i can know the Test Tool is execute correctly?
The Test Tool which i used in the link below:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Thanks a lot in advance,
Vinh Vo

HI,
In XI You can go to RWB (from XI server homepage)->Comp Monitoring -> Display All ->Int Server-> Int Engine
In the bottom, you find 3 tabs, select the test message tab to post messages.
Pls note that, when you need to test, you should have created the scenario in IR/ID (and u can use the details of Receiver Determination ID) to fill in the details.
You can refer this:
/message/266750#266750 [original link is broken]

Is it possible to use external testing tools in SAP XI

Hi,
I have been working on file to file transfer of large size more than 1 GB. I have many doubts like:
1.Can I use Data compression techniques so that my files can be processsed(my scenario involves a lot of mapping)
2.Can any of the engines be stopped so that processing speed increases.
3.Can any of the third party testing tools like Load runner be used in to monitor the process.
Please help me with sloutions.
Thanks in advance.

One GB is a very huge file. First of all check ur XI hardware configuration.
1. U may write ur adapter module to zip the message.
2. It wont affect the performance much if the file size is 1 GB. Also u cant stop adapter engine (File Adapter) and the Integration Engine in ur scenario
3. U can do the load testing on XI using load runner
Regards,
Prateek

Test scripts for oracle applications using qtp testing tool

hi
i want some test scripts for oracle applications using qtp testing tool
regards

You will need to create separate scripts for Load testing. The functional scripts cannot be used in OLT. The exceptions to this would be the "General" items (Java Code Script & Web Services) which can also be used in OLT.
e.g. Instead of selecting "Functional Testing - Oracle EBS/Forms"
select "Load Testing (Protocol Automation) - Oracle EBS/Forms"
Once you get into load testing you'll realise that you want to create very specific scripts and won't want to try re-using functional scripts. I know a lot of such tools are 'sold' on the fact that functional scripts can be re-used for load, but when it comes down to it you'll want to design your load scripts seperately anyway!

Abap query tool

Hi Anji,
Pls send the procedure (steps) in abap query tool.How to generate a report by using query tool?
thanks in advance
ramu

Hi
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
<b>Reward points for useful Answers</b>
Regards
Anji

Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again.

We are trying to run unit tests in TFS server.
Below is the System Configuration:
Visual studio version: VS 2013 Ultimate
TFS: TFS 2013
For this we have created a build and able to run the build successfully. And build page showing one link for Test result. When we click on this link, we got below error message.
"Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again."
And below is the screenshot of the error message. So please let us know is there and thing else we need to do to solve this issue?

Hi RS,
Thanks for your reply.
Yes, if you want to open and view test result on your laptop, you need install the VS 2013 on your laptop as well.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Stress test tool for EBS

Hi Hsawwan, other EBS APPS dba's!
We are trying to predict some performance according future load on EBS. This is classic stress test techniques. We want to automate stress on APPS side and run some requests and forms as well....
With "Load runner" we have unsolvable problems....
What can we use for that?
THX,
Damir Vadas

Damir,
With "Load runner" we have unsolvable problems....What do you mean by unsolvable problems?
What can we use for that?You may try OpenSTA.
OpenSTA Users Home Page - Free Web Load and Stress Testing Tool
http://www.opensta.org/
Also, have a look at the following links:
Automated Testing for the E-Business Suite
http://blogs.oracle.com/stevenChan/2006/06/automated_testing_for_the_ebus.html
Breaking Oracle Presentation
http://www.psoug.org/pres/ukoug08_breaking_oracle.pdf

Stress test tool for Developer 6i

Hi!
I'm looking for a stress test tool for a client/server 6i Forms/Reports application.
Any suggestions appreciated!
Br Niklas Danielsson

Mercury Loadrunner should do it.
Check the Web.

Stress test tools??

Does anyone know of a stress test tool that can be used to grade Oracle forms on an Oracle application server v. 9i?

Hi this is a tools that i found on apache web site, it is free and it works well for test stress on web server with forms
http://jakarta.apache.org/jmeter/index.html
Bye

Abap testing tool

Similar Messages

Maybe you are looking for