Abap user for SLD Destination

Hello!
I have small question.
I'm adding system to SLD and on the system where SLD is located i have to create Destination (for RFC in abab system). In this Destination i need to set user from abap system.
But which roles this user should have?
I used my (sap all priveleges) account for testing and it works fine, but i whant to create service user for this porpose and need to to know roles for this user.
Thank you in advance.

check
https://help.sap.com/saphelp_nw70ehp2/helpdata/en/48/b7b38fecf26745e10000000a421937/content.htm

Similar Messages

  • ABAP user for portal

    Dear Experts,
    We have a BI 7.0 EH1 installation on a single server with 2 separate instances for ABAP and JAVA currently. All configurations are currently okay and we are able to deploy infoproviders, load data and view them on Bex.
    Currently, we are unable to utilize ABAP users for any activity on the portal, be it administration or execution of Bex for queries. We are also unable to see the ABAP system in Java currently in the configuration settings. I would like to use the ABAP user for execution of queries. SSO is configured  and we do not have any errors while executing the support desk tool.
    Kindly provide any solutions pertaining to this issue.
    Thanks & Regards
    Suneeth

    Hi Surya ,
    When you install portal or any NW component with ABAP stack , ABAP stack hold precidence over the JAVA Stack , refer to this link to have more idea on this .
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/306bb5bc98f24f8a85d489449af456/frameset.htm--
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/7678123c96814bada2c8632d825443/frameset.htm
    Thanx
    Pankaj

  • Do I really need to install ABAP stack for SLD

    As far as I know, the SLD runs on the Java stack.  We're planning to install the standalone SLD server as the central SLD, to which later all the systems (ABAP, JAVA) will be connected.  I wonder if it's really necessary to install the ABAP+JAVA stack for it.  If I only install Java stack, will there be any concern in the future if however the ABAP stack become required?
    Thanks,
    Jerry

    Jerry,
    SLD only need the J2EE engine. Usually you'll see SLD attached to a Solution Manager 4.0, SAP PI/XI,  BI 7.0 (BI JAVA)  or EP. These are the systems that really need a SLD to run.
    Honestly I can't see any advantage in installing a standalone SLD, unless you have several SAP environments and a complex architecture.
    Anyway I think you should see  these links...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582
    /people/boris.zarske/blog/2007/06/13/sizing-a-system-for-the-system-landscape-directory-of-sap-netweaver
    /people/boris.zarske/blog/2007/06/10/planning-a-strategy-for-the-system-landscape-directory-sld-of-sap-netweaver
    Cheers

  • What 's the user for SLD

    Hi all :
         I'd like to log onto SLD with J2EE_admin and XIsuper, after log on , all  buttons like 'Administration'  are all grey (don't work). some message at the top  says that missing role for these two users.  I tried add all roles to the two users with SU01 , but that doesn't work.
         Would you please tell me how to correct this , how to add roles to these two users. or are there any more users to log on and administrator on SLD?
         couldn't thank you more !!!

    Plz refer the following link,
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    Following are SLD Specific roles.
    SAP_SLD_ADMINISTRATOR
    SAP_SLD_CONFIGURATOR
    SAP_SLD_DEVELOPER
    SAP_SLD_GUEST
    SAP_SLD_ORGANIZER
    As per your requirement add the corresponding role to your ID.
    For the UME access privileges are controlled by UME actions. So go to the role maintenance screen, In Assigned Actions tab search for actions "LcrUser" and assign it to role.
    See the below thread.
    /thread/341804 [original link is broken]
    check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm

  • PI 7.1. Setup Abap user to access Java tools

    Hi gurus!
    I need your help, I'm working with a new PI instalation, and we have 2 types of user, one Java user with their password, and other ABAP user with their password. When I try to access to repository or directory, I must to use Java user, but in the other PI system, this is not so, I only use ABAP user for all things.
    In this system, I need keep roles in abap stack and java stack, and  think this is not optimal.
    How I can synchronize the two types of users for only use the ABAP user to all things?
    Thank you in advance.

    How I can synchronize the two types of users for only use the ABAP user to all things?
    Simple....assign the *_J2EE roles to your ABAP user....more information on the roles required can be taken from
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    We normally create only one user and then assign ABAP and JAVA roles to it.

  • ABAP-Programming for SAP BW u0096 User-Exits und BAdIs

    Hi experts,
    i am a novice und looking for informations about Badi and User-exits for BW .
    i want to learn how to programm extractors.
    Can you you help me by giving me some informations or documents or sap links where i can find informations?
    Cheers

    Dear Mr Herzog,
    Congratulations for the book: Abap Developement for SAP Netweaver BI: User exits and BadIs.
    We're trying to implement the suggestions on the chapter 5.1.1 Interface of function module EXIT_SAPLRSR0_001 (page 136), however, we're having problens with the abap sintax CALL_FUNCTION  l_d_name IF FOUND.
    The command IF FOUND is not accepted.
    It'll be very helpful to avoid issues on tranporting include zxrsru01.
    I appreciate any additional help on how to implement it.
    Best Rgs
    Eliseo Bouzan

  • Why do we need to define RFC destination and user for material replication

    Dear Experts,
    why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
    regards,
    Ranjan

    Hello,
    As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
    You can refer to note 720819.
    Regards,
    Ricardo

  • RFC User for Connectivity with ABAP Server Proxy Required?

    Hi people,
    I am just wondering how I set-up my connectivity between XI and my business system B.
    Our basis already set-up the connection to the runtime workbench from B->XI
    For that sake they've added the xirwbuser to B (Xi has it as well, of course).
    Now I am configuring the whole thing in the Directory. There I need an receiver agreement and a channel. For that I take the adapter type "XI". Anyway, I need to give here an RFC destination as well. I've added one of type "H".
    And now the issue: Do I really need a separate user for that rfc connection? I thought with proxies the systems are somewhat like "hard-wired" and do not need special users.
    Anyway, if I need a dedicated RFC user: Is a certain role enough or do I need special roles depending on the stuff I am doing in the business system?
    Thanks in advance!
    Helge

    You can of course use an existing service user.
    But for monitoring purpose it is receommended to use a seperate user. (Think about system log entries).
    The user needs the role SAP_XI_APPL_SERV_USER.
    Regards
    Stefan

  • Abap users autorization for BO BI reports (made in Design Studio) on HANA data

    Hello!
    We are bit new to BO BI and Design Studio. Cauld you help us?
    BO BI reports must represent SAP HANA data.
    We have a lot of users in ERP with their roles.
    We need accordingly restrict users access  to certain values for group of users in given Data Source based on HANA Analytic or Calculation View.
    For example, report must display only “A” Plant data for first group of users, for second group – only “B” Plant data.
    Where should we mantain users (and give them roles) and what authorization use?
    The best way for mantaining users is CUA on ERP for us.
    BO BI supports SAP authorization and role mapping with it's own user groups with no probler.
    But what about HANA? We didn't find any positive information about roles mapping and authorization in HANA.
    It looks like we need to create all users and give them roles in HANA... Is it really so? How to synchronize HANA users and their authorization with ERP after this...
    Thank you!

    Hi - this is a question that is better for the HANA space.  Do you want me to move it there?

  • ABAP User Roles and Query for accessing particular T- codes and Reports

    dear Gurus
    I have one problem, i want to know about ABAP User Query ,i have one requirement my user wants to Lock all the HR Std versus Customized reports in T- code SQ01,other department peoples also see the Payslips and Hr personal reports which is harmfull to the dept so i want to Lock all the reports in Std T- code in SQ01 and i have created one Customized User Roles or Query in which the T-codes and Reports are assigned only those particular user can access the T-codes and Std reports .how can it be possible i dont have any idea about user roles and Queries .
    kindly help me out or send me some documents related to user roles and queries
    regards ritesh sharma

    Hi Ritesh,
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/103cafc2-7a64-2b10-14b3-eddb7d324561
    Regards,
    Flavya

  • UME to CUA(ABAP) user data replication for custim attribute.

    Hi All,
    We have planned that Users will be created in portal and from there user data will flow to CUA(ABAP) and from CUA it will flow to r3,BW,CRM ..etc .
    I have configured the UME(portal) so that when ever I create user in Portal it flows to CUA (ABAP). In CUA when I assign a system (system name -  the abap system in which CUA should transport the user data) to the user ,user data flows in respective system (R3) ie user gets created in that system (r3 or BW depending on the assigned system name) .
    UME ---> CUA --- > r3 or bw or CRM etc…
    Now I want to automate the process .I want to assign the system name to the user in UME itself (not in CUA).I have created a custom attribute ‘system’ in CUA .
    Now problem is how to map UME custom attribute of ‘system’ to CUA (ABAP) user attribute ‘system’ . Also please let me know which XML file (data source) I should modify.
    Regards,
    Gyan

    Hi Gyan,
    We have installed NW'04 SP14 with both ABAP and JAVA stacks on this system. We are using datasourceConfiguration_abap.xml as our J2EE
    UME setting. We have found that when we create any user in client 000 from CUA that user is then create in UME. We have three clients in this development system. When we create users from CUA from the other clients in this ABAP system the users do not come into the Java UME. We do not want to create the users in client 000. What is your Java UME setting and how can we get the users in the other clients push to UME.
    Regards,
    Anthony
    Message was edited by: Anthony Bright

  • CTS+ Configuration in PI 7.4 for SLD specific data

    Hello Guys,
    I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
    I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
    Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
    Its very urgent.

    Did you happen to see this document of a CTS+ configuration for 7.3 (should be fairly the same for 7.4)?   CTS+ Configuration for PI 7.3
    Steps 1.2 and 8.2 have references to roles.

  • Option "No SLD Destination"

    Hi,
    I need some clarification according to following situation:
    On one machine (A) I have installed SAP NetWeaver, Development Subscription, with double stack engines ABAP+Java and all possible usage types. On this machine I have configured a SLD (CEN) and it is running.
    On another machine (B) I have diverse other SAP Trials (NSP, J2E, and CE1), they all are using a local SLD.
    Now I have installed successfully one further system, a developer workplace including a Java instance and the developer studio on (B). During installation - in phase: parameter settings - I decided SLD-oriented to use the option "No SLD Destination" because I read that there had been given different changes to CTS and SLD since release SAP NW 7.0 SPS13. So I do not want to mix the 'older' SAP versions SLD with the new system, because I want to activate the usage of NWDI (installed on (A) ) via the developer studio.
    Luckyly, I found the Wiki of Christian Haarmann who describes the very hard way to post-install a SLD when you have decided yourself to use the option "No SLD Destination".
    WIKI: "Walkthrough Installation of SAP NetWeaver Trial and ESS Business Packages"
    But he does the way, when all components are on the same machine...
    Would it the right way to start post-installation of SLD with his third step: running NWA_03_Creating a connection to the SLD... and to give here the connection data of my central system with the user who is known on that server (A). If so, must this user also known with my machine which I want to use for test development (B)? Reading the newest documents about SLD and looking to the messages during the installation process, I understood that the software components being installed on the development system need no local SLD.
    Before I am bollixing up my server machine I need some help and advice from you, the experts, to come clear with this situation.
    Any input is appreciated.
    Thank you in advance.
    Regards
    Christian
    Edited by: Juan Reyes on Jul 1, 2009 4:55 PM
    Edited by: Christian Rauch on Jul 2, 2009 11:43 AM
    Edited by: Christian Rauch on Jul 2, 2009 11:44 AM

    Monika,
    Need not worry at this time if you dont see the screen.You can configure SLD once installation is done.
    Thanks
    Kalyan

  • [SLD] Autoregistration of ABAP System in SLD

    Hi,
    want to registrate an ABAP system in SLD.
    RZ70 create errors, because RFC destination is missing. 
    Trying to create a destination type T to the SLD sytstem. I'm
    using same parameter as define in another system that is
    also connect to SLD, but he doesn't recognize the gateway service.
    Without gateway information he says that the programm is not
    registered yet.
    Where to register the programm? In ABAP system or XI?
    thanks

    Hi,
    you can find the solution here.........
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    Thanks,
    Madhu

  • Pushing data from abap system to SLD

    Hello,
    I am pushing data from my abap system to SLD.
    Job SAP_SLD_DATA_COLLECT is successfully finished but the job SAP_LMDB_LDB_0000000001. is not visible in sm37 in solman.
    Hence technical system is not visible in LMDB.
    Please guide me
    Thanks and Regards,
    Akshay

    HI Akshay
    I hope you had make sure that in SM61 you have assigned batch servers for the jobs.
    Can you try to sync your LMDB with SLD once. There is option in LMDB to sync the data, Just see if you are getting the technical system details.
    Also, please check the rfc destinatoin with ICM port if it is stable.
    RFC LMDB_SyncDest<X> is using ICM Port 80<NR>
    You can proceed as below
    Please De-Activate the Sync Job in Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB.
    Execute transaction 'SM59'.
    Locate the HTTP Destination -> 'LMDB_SyncDest<X>'.
    Switch to Edit mode.
    Change the Service No to 5<XX>00 where XX is the instance number.
    Then makesure the Authorization and Connection test are working.
    Then Re-Activate the synch job, via Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB
    Apart from that, can you check below note if it is applicable for you
    1615263 - LMDB: Incremental Content Sync Job remains "Scheduled"
    Regards
    Rishav

Maybe you are looking for